Uniform silica nanoparticles encapsulating two-photon absorbing fluorescent dye

We have prepared uniform silica nanoparticles (NPs) doped with a two-photon absorbing zwitterionic hemicyanine dye by reverse microemulsion method. Obvious solvatochromism on the absorption spectra of dye-doped NPs indicates that solvents can partly penetrate into the silica matrix and then affect the ground and excited state of dye molecules. For dye-doped NP suspensions, both one-photon and two-photon excited fluorescence are much stronger and recorded at shorter wavelength compared to those of free dye solutions with comparative overall dye concentration. This behavior is possibly attributed to the restricted twisted intramolecular charge transfer (TICT), which reduces fluorescence quenching when dye molecules are trapped in the silica matrix. Images from two-photon laser scanning fluorescence microscopy demonstrate that the dye-doped silica NPs can be actively uptaken by Hela cells with low cytotoxicity.     

Surface-functionalized fluorescent silica nanoparticles for the detection of ATP

The design of two-dyed fluorescent silica nanoparticles for ATP detection is presented. The indicator dye possesses a dipicolyl-amine (DPA) unit complexed with Zn(II) as a receptor function for ATP while a rhodamine derivative is used as the reference dye. The nanoparticles were fully characterized regarding analytical performance, morphology and cytocompatibility.     

Controlled synthesis of fluorescent silica nanoparticles inside microfluidic droplets

We study the droplet-based synthesis of fluorescent silica nanoparticles (50-350 nm size) in a microfluidic chip. Fluorescein-isothiocyanate (FITC) dye is first chemically linked to aminopropyl triethoxysilane (APTES) in ethanol and this reaction product is subsequently mixed with tetraethyl orthosilicate (TEOS) to yield a fluorescent silicon alkoxide precursor solution. The latter reacts with an aqueous ethanol-ammonia hydrolysing mixture inside droplets, forming fluorescent silica nanoparticles. The droplets are obtained by pinching-off side-by-side flowing streams of alkoxide solution/hydrolysing mixture on a microfluidic chip using a Fluorinert oil continuous phase flow. Synthesis in droplets leads to a faster reaction and allows drastically improved nanoparticle size uniformity (down to 3% relative standard deviation for 350 nm size particles) when compared to conventional bulk synthesis methods, thanks to the precise control of reagent concentrations and reaction times offered by the microfluidic format. Incorporating FITC inside silica nanoparticles using our method leads to reduced dye leakage and increases the dye's stability, as evidenced by a reduced photochemical bleaching compared to a pure FITC solution.     

Dendritic cell internalization of foam-structured fluorescent mesoporous silica nanoparticles

In this paper, foam-structured fluorescent mesoporous silica nanoparticles (FMSNs) are produced in a sol-gel method with the introduction of a phosphonate functional group. It is found that the phosphonate functionalized FMSNs with the foam structure minimizes the aggregation of FMSNs in solution. The average particle size of the FMSNs without and with phosphonate functionalization is 46.3 ± 5 nm and 60.5 ± 8 nm in diameter, respectively. The latter one exhibits higher fluorophore loading capacity (~67 ± 2.5%). The excitation wavelength (λ(ex)) of FMSNs is observed at 526 nm, approximate 12 nm larger in the Stoke-shift compared to the free organic dye at 494/514 nm. Furthermore, the photostability of the hydrophobic fluorophore is greatly improved by the FMSNs with the foam structure. In addition, the dose-dependent nature of FMSN uptake is assessed for the immune cells, the bone marrow-derived dendritic immune cells (BMDCs). Our results indicate that approximately 42% of BMDCs are able to take up foam-structured FMSNs (>5 μg/ml) without decreasing the viability of BMDCs. Thus, the phosphonate functionalized FMSNs with the foam structure are suitable to be used for many biomedical applications, especially in cell tracking.     

Monodisperse silica nanoparticles encapsulating upconversion fluorescent and superparamagnetic nanocrystals

A new type of multifunctional silica-coated nanocomposites, detectable by their upconversion fluorescence and addressable by a magnetic field, was synthesized.     

Core-shell fluorescent silica nanoparticles for sensing near-neutral pH values

pH-responsive fluorescent core-shell silica nanoparticles (SiNPs) were prepared by encapsulating the pH-sensitive fluorophore 8-hydroxypyrene-1,3, 6-trisulfonate into their silica shell via a facile reverse microemulsion method. The resulting SiNPs were characterized by SEM, TEM, fluorescence lifetime spectroscopy, photobleaching experiments, and photoluminescence. The core-shell structure endows the SiNPs with reduced photobleaching, excellent photostability, minimized solvatachromic shift, and increased fluorescence efficiency compared to the free fluorophore in aqueous solution. The dynamic range for sensing pH ranges from 5.5 to 9.0. The nanosensors show excellent stability, are highly reproducible, and enable rapid detection of pH. The results obtained with the SiNPs are in good agreement with data obtained with a glass electrode.

Functional silica nanoparticles synthesized by water-in-oil microemulsion processes

Water-in-oil (W/O) microemulsion is a well-suitable confined reacting medium for the synthesis of structured functional nanoparticles of controlled size and shape. During the last decade, it allowed the synthesis of multi-functional silica nanoparticles with morphologies as various as core–shell, homogenous dispersion or both together. The morphology and properties of the different intermediates and final materials obtained through this route are discussed in the light of UV–Vis–NIR spectroscopy, dynamic light scattering (DLS) and X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and magnetometer SQUID analysis.     

Hollow mesoporous silica nanoparticles for intracellular delivery of fluorescent dye

In this study, hollow mesoporous silica nanoparticles (HMSNs) were synthesized using the sol-gel/emulsion approach and its potential application in drug delivery was assessed. The HMSNs were characterized, by transmission electron microscopy (TEM), Scanning Electron Microscopy (SEM), nitrogen adsorption/desorption and Brunauer-Emmett-Teller (BET), to have a mesoporous layer on its surface, with an average pore diameter of about 2 nm and a surface area of 880 m²/g. Fluorescein isothiocyanate (FITC) loaded into these HMSNs was used as a model platform to assess its efficacy as a drug delivery tool. Its release kinetic study revealed a sequential release of FITC from the HMSNs for over a period of one week when soaked in inorganic solution, while a burst release kinetic of the dye was observed just within a few hours of soaking in organic solution. These FITC-loaded HMSNs was also found capable to be internalized by live human cervical cancer cells (HeLa), wherein it was quickly released into the cytoplasm within a short period of time after intracellular uptake. We envision that these HMSNs, with large pores and high efficacy to adsorb chemicals such as the fluorescent dye FITC, could serve as a delivery vehicle for controlled release of chemicals administered into live cells, opening potential to a diverse range of applications including drug storage and release as well as metabolic manipulation of cells.     

Stabilising fluorescent silica nanoparticles against dissolution effects for biological studies

Here we show that commonly employed St?ber type fluorescently labelled silica nanoprobes degrade by hydrolytic dissolution, accelerated under biological media conditions as compared to water alone. We have thus developed a method to greatly improve their stability under such conditions.     

Synthesis and photophysical properties of silica nanoparticles based on europium(iii) complexes

Monodisperse 280?C480 nm silica particles doped with europium complexes with thenoyltrifluoroacetylacetone and adducts with some phosphine oxides as luminophores were prepared for the first time by the optimized Stober procedure using surfactants. The size and the polydispersity of the obtained particles depend on the luminophore incorporated in the polymer template. The photophysical properties of aqueous dispersions of the europium(iii)-doped silica particles were studied by the luminescence method.     

Colloidal stability and photophysical characteristics of luminesent silica nanoparticles modified with various nitrogen/oxygen-containing trialkoxysilanes

Surface modification of the luminescent silica nanoparticles doped with Tb(III)–p-sulfonatothiacalix[ 4]arene complex was carried out using a series of nitrogen/oxygen-containing trialkoxysilanes. It was found that groups capable of nonspecific interactions on the surface of the nanoparticles cause a significant decrease in their colloidal stability. The chromophore moieties in the modifiers were found to quench the luminescence of the nanoparticles. The surface modification of the nanoparticles is responsible for the change in the mechanism of luminescence quenching in the presence of copper(II) ions due to decreased accessibility of luminophores to the quencher.     

A study of using luminophore-doped silica nanoparticles as fluorescent probe in protein microarray assay

A convenient method for the synthesis of tris(2,2′-bipyridyl) dichlororuthenium(II) hexahydrate-doped amino-modified double-layer silica nanoparticles is presented in this paper. The synthesized nanoparticles are uniform and photostable, and can be well dispersed in a water solution. Proteins could be directly immobilized onto these nanoparticles by a simple coupling process without losing their biological activities. These nanoparticles were further used as fluorescent probes in protein microarray assay for the quantitative detection of protein. The results obtained by these nanoparticles, with the detection limit of as low as 3.5 μg/mL, were much better than those involving the use of conventional FITC probe. Translated from Chinese Journal of Analytical Chemistry, 2006, 34(9): 1227–1230 (in Chinese)     

Effects of pluronic silica nanoparticles on the photophysical and photodynamic therapy behavior of triphenyl-p-phenoxy benzoic acid metalloporphyrins

5, 10, 15, Triphenyl-20-p-phenoxy benzoic acid porphyrins (P) containing Zn (ZnP), Ga (GaP), and Si (SiP) were synthesized and conjugated to pluronic-silica (PluS) nanoparticles (NPs) where the fluorescence and singlet oxygen generating behavior of the porphyrins were investigated. The highest singlet oxygen quantum yield (Φ_Δ) was obtained for ZnP. When the porphyrins were conjugated to the PluS NPs, the Φ_Δ was quenched and fluorescence was enhanced. The pore size of the NPs upon conjugation decreased from 18.9 nm for PluS NPs to 2.4 nm (for ZnP as an example) as determined by applying the Brunauer–Emmett–Teller method. The porphyrin complexes and their conjugates were tested for their photodynamic therapy (PDT) activity on MCF-7 breast cancer cells. It was found that ZnP and its conjugate showed the highest PDT activity. The p > 0.05 indicated that ZnP is significantly different than GaP and SiP.     

Aspects on the photophysical processes in riboflavin

Two aspects on the photophysics of riboflavin have been analyzed:first the donnor-acceptor complexes formation in order to decide if the complexes formation is from the ground or from the first excited state of Riboflavin; second the variation of lifetime fluorescence of Riboflavin with the pH of medium have been studied. Single photocounting system and deconvolution procedure were used.     

New silica and polystyrene nanoparticles labeled with longwave absorbing and fluorescent chameleon dyes

We are presenting new fluorescent nanoparticles (NPs) made from silica or polystyrene. Such NPs are potentially useful for purposes of cellular imaging and sensing. The NPs were surface-modified with amino groups, and longwave absorbing and emitting dyes were then conjugated, via their reactive chloro atoms, to the NPs. The reactions proceed at temperatures of around 65 °C and in predominantly aqueous solution, and are accompanied by a color change from typically green to blue. By analogy to other labels giving this effect, we refer to such dyes as chameleon labels. All NPs were characterized in terms of size, by absorption and emission spectroscopy, thermogravimetry and zeta potentials. The chameleon effect also was used to detect the presence of minute quantities of amino groups on the surface of NPs, both by absorptiometry and, with particular sensitivity, by fluorescence.

Nanoparticles made from silica, polystyrene or lanthanide-doped NaYF₄ are presented that have been labeled with a new class of longwave dyes that undergo a color change on reacting with surface amino groups (the so-called chameleon effect). This effect can also be used to detect the presence of amino groups on such particles.

     

Label-free detection of adenosine based on fluorescence resonance energy transfer between fluorescent silica nanoparticles and unmodified gold nanoparticles

A sensitive and convenient strategy was developed for label-free assay of adenosine. The strategy adapted the fluorescence resonance energy transfer property between Rhodamine B doped fluorescent silica nanoparticles (SiNPs) and gold nanoparticles (AuNPs) to generate signal. The different affinities of AuNPs toward the unfolded and folded aptamers were employed for the signal transfer in the system. In the presence of adenosine, the split aptamer fragments react with adenosine to form a structured complex. The folded aptamer cannot be adsorbed on the surface of AuNPs, which induces the aggregation of AuNPs under high ionic concentration conditions, and the aggregation of AuNPs leads to the decrease of the quenching ability. Therefore, the fluorescence intensity of Rhodamine B doped fluorescent SiNPs increased along with the concentration of adenosine. Because of the highly specific recognition ability of the aptamer toward adenosine and the strong quenching ability of AuNPs, the proposed strategy demonstrated good selectivity and high sensitivity for the detection of adenosine. Under the optimum conditions in the experiments, a linear range from 98 nM to 100 μM was obtained with a detection limit of 45 nM. As this strategy is convenient, practical and sensitive, it will provide a promising potential for label-free aptamer-based protein detection.     

Effects of surfactant/water ratio and dye amount on the fluorescent silica nanoparticles

Effects of surfactant/water volume ratios and dye amounts on the properties of micelles and fluorescence silica nanoparticles were studied in microemulsions containing nonionic surfactant Triton X-100, hexanol as co-surfactant, cyclohexane as organic solvent, and metal organic dye (tris(2,2′-bipyridyl)dichlororuthenium) via fluorescence probe technique, TEM, and XPS. Fluorescence probe measurements show that the micelle microenvironment becomes stable at the surfactant/water volume ratio higher than 3.5 and the incubation time longer than 10 h. The data suggest that the silica shell, which is formed at the surfactant/water ratio of 3.5, yields an efficient protection of dye molecules against the e-beam irradiation and result in high photostability of fluorescent silica. We pioneered the localization of dye molecules on the surface of dye-doped silica and found that an increase of dye amounts, beyond a threshold, in the microemulsion cannot enhance the fluorescence intensity of dye-doped nanoparticles. These results are of significant importance for optimizing the synthesis of fluorescent nanoparticles with high photostability and low cost.     

Novel multiparametric approach to elucidate the surface amine-silanization reaction profile on fluorescent silica nanoparticles

This Article addresses the important issue of the characterization of surface functional groups for optical bioassay applications. We use a model system consisting of spherical dye-doped silica nanoparticles (NPs) that have been functionalized with amine groups whereby the encapsulated cyanine-based near-infrared dye fluorescence acts as a probe of the NP surface environment. This facilitates the identification of the optimum deposition parameters for the formation of a stable ordered amine monolayer and also elucidates the functionalization profile of the amine-silanization process. Specifically, we use a novel approach where the techniques of fluorescence correlation spectroscopy (FCS) and fluorescence lifetime measurement (FL) are used in conjunction with the more conventional analytical techniques of zeta potential measurement and Fourier transfer infrared spectroscopy (FTIR). The dynamics of the ordering of the amine layer in different stages of the reaction have been characterized by FTIR, FL, and FCS. The results indicate an optimum reaction time for the formation of a stable amine layer, which is optimized for further biomolecular conjugation, whereas extended reaction times lead to a disordered cross-linked layer. The results have been validated using an immunoglobulin (IgG) plate-based direct binding assay where the maximum number of IgG-conjugated aminated NPs were captured by immobilized anti-IgG antibodies for the NP sample corresponding to the optimized amine-silanization condition. Importantly, these results point to the potential of FCS and FL as useful analytical tools in diverse fields such as characterization of surface functionalization.     

Absorption and emission spectra of fluorescent silica nanoparticles from TD-DFT/MM/PCM calculations

A multi-scale computational protocol, which combines Quantum Mechanics and Molecular Mechanics (QM/MM) calculations with the polarisable continuum model (PCM), has been used to study the tetramethylrhodamine isothiocyanate (TRITC) fluorophore, embedded in three different environments, namely in water, on an amorphous silica surface and covalently encapsulated in a silica nanoparticle (C dot). Absorption and emission spectra have been simulated by using TD-B3LYP/PCM calculations, performed on the TRITC ground and excited state geometries, optimized at the QM/MM level. The results are in good agreement with experimental data confirming the caging effect played by the silica shell on the mobility of the TRITC molecule when covalently encapsulated in silica nanoparticles. This could result in a decrease of the nonradiative decay rate and thus an increase of the quantum yield of the molecule.