Results of an experimental investigation of the residual stresses in wound glass-reinforced plastics

The results of an experimental investigation of the residual stresses in wound glass-reinforced plastic rings are presented. The residual stresses were determined by the Davidenkov method. The dependence of the maximum tensile and compressive circumferential stresses on ring thickness and polymerization temperature is investigated. The experimental data are compared with the results of calculations based on the theory proposed in [1, 2].Moscow Power Engineering Institute. Translated from Mekhanika Polimerov, No. 6, pp. 1116–1119, November–December, 1970.     

Study of the stresses associated with the hot orientation of certain carbon-chain fibers

The process of hot orientation of Khlorin, polyacrylonitrile, and polypropylene fibers is investigated; the stresses associated with this process are determined. The possibility of determining the actual temperature in the orientation zone is demonstrated. The effect of the mobility of the macromolecules on the stresses is considered.Tashkent Institute of the Textile Industry. Translated from Mekhanika Polimerov, No. 2, pp. 372–374, March–April, 1972.     

Analysis of the transition zone in combined metal/reinforced-plastic shells

The bending stresses in the conical joint zone of cylindrical shells composed of two different materials are determined for the case of internal pressure. The effect of the length of the joint on these stresses is investigated using parameters typical of steel and glass-reinforced plastic.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 3, pp. 465–475, May–June, 1971.     

Theory of the biomechanism of fractures of the diaphysis of long tubular bones

A new theoretical basis is proposed for the biomechanism of fractures of the diaphysis of long tubular bones resulting from bending deformation. Bone damage is shown to result from the concentration of maximum tensile stresses on the tension side and shear stresses in the compression zone. The origin of fan-shaped cracks and oblique fractures, occurring individually or in combination, is explained in these terms.Altai State Medical Institute. Translated from Mekhanika Polimerov, No. 2, pp. 318–322, March–April, 1971.     

Variant of the variable-modulus theory of elasticity

A variant of the variable-modulus theory — a generalization of the ideas of the classical theory of elasticity in which the observed difference in the moduli of elasticity in uniaxial tension and compression and homogeneous shear is taken into account — is considered. Quasilinear expressions are proposed for the stresses in terms of the strains and the strains in terms of the stresses.Tula Polytechnic Institute. Translated from Mekhanika Polimerov, Vol. 5, No. 2, pp. 363–365, March–April, 1969.     

Residual stresses in plastic rings reinforced with glass and manufactured with consolidation of the various layers

The residual stresses in thin-wall plastic rings reinforced with glass and prepared by the method of consolidating the layers in combination with various winding regimes have been studied experimentally. It is shown that variation of the winding regime from one layer to another can change the distribution of the stresses through the thickness of the ring.Moscow Energy Institute. Translated from Mekhanika Polimerov, No. 1, pp. 174–176, January–February, 1972.     

Effect of the conditions of formation of glued joints on their thermophysical properties

A correlation has been experimentally established between the thermal resistance of adhesive films and the internal stresses that develop during the curing process. During cure the thermal resistance varies in parallel with the internal stresses. It is assumed that the development of thermal resistance is determined by the tension produced in the film by the development of the internal stresses.Voronezh Forest Engineering Institute. Translated from Mekhanika Polimerov, No. 4, pp. 754–756, July–August, 1973.     

Residual stresses in glass-reinforced plastics parts

The determination of the residual stresses in glass-reinforced plastics elements is considered. It is shown that these stresses reach appreciable values and should be taken into account in strength calculations. Quantitative data are supplied for a series of materials. At normal operating temperatures the residual stresses are stable.Moscow Aviation Technological Institute. Translated from Mekhanika Polimerov, No. 6, pp. 1117–1119, November–December, 1969.     

Reasons for the lowering of the lifetime of polymers under cyclic loading

A model is proposed which explains the lowering of the lifetime of polymers on transition from static to cyclic loading by the interaction of local stresses from an external load with residual stresses which arose after preceding loading cycles. The results predicted on the basis of the model have been checked experimentally on polymethyl methacrylate, and a good agreement has been shown.M. I. Kalinin Leningrad Polytechnic Institute. Translated from Mekhanika Polimerov, No. 2, pp. 279–283, March–April, 1976.     

Residual stresses in glass-reinforced polyethylene

The variation of the axial and radial components of the residual stresses in fiber-reinforced polyethylene with distance from the fiber has been investigated. It is shown that, irrespective of the agent employed, coupling leads to an increase in stresses. The values obtained for the residual stresses are compared with the adhesion strength determined by the shearing method. The effect of a structure-forming agent on the residual stresses is investigated.Mendeleev Moscow Chemical Engineering Institute. Translated from Mekhanika Polimerov, No. 4, pp. 722–724, July–August, 1971.     

Internal stresses in crystallizing polymer coatings

The effect of crystalline structure on the internal stresses in polyethylene coatings has been studied. An equation for the internal stresses in crystallizing polymer coatings has been derived. The important role of orientation processes is demonstrated.Leningrad Lensovet Technological Institute. Translated from Mekhanika Polimerov, Vol. 4, No. 6, pp. 992–996, November–December, 1968.     

Testing the strength of anisotropic rings

A study was made of the distribution of stresses in an anistropic ring under compression or tension with rigid cams, taking into account the final dimensions of the zone of contact.Moscow Power Engineering Institute. Translated from Mekhanika Polimerov, No. 1, pp. 175–177, January–February, 1974.     

Effect of residual stresses on the strength of oriented glass-reinforced plastics

The effect of structural residual stresses on the strength of a glass-reinforced plastic loaded along and across the fibers is investigated. It is established that the residual stresses lead to an increase in the strength of the glass-reinforced plastic across the fibers and to cracking of the polymer matrix in tension along the fibers, but have practically no effect on the combined deformation of the matrix and the fibers in compression.Moscow Ordzhonikidze Aviation Institute. Translated from Mekhanika Polimerov, No. 3, pp. 475–480, May–June, 1969.     

Stresses in adhesive joints in cylindrical shells and panels

The stresses in adhesive joints in cylindrical shells and panels are determined for the general case of loading. The effects of joint length and the parameters of the adhesive, the shells, and the panels on the magnitude of these stresses are investigated.Aviation Technology Institute, Moscow. Translated from Mekhanika Polimerov, No. 6, No. 1093–1103, November–December, 1972.     

Structural stresses in composites reinforced with a system of anisotropic fibers

The effect of the anisotropy of the mechanical and thermophysical characteristics of the reinforcement on the temperature stresses in unidirectional composites has been investigated. The stresses near fibers forming a regular structure in the transverse plane are estimated as a function of the thermoelastic properties of the components and the structure parameters.Moscow Power Engineering Institute. Translated from Mekhanika Polimerov, No. 4, pp. 728–731, July–August, 1974.     

Formation of residual stresses in components made out of laminated and fibrous composites during the hardening process

Conclusions The application of the theory of the viscoelasticity of unstable media to the calculation of the residual stresses enables one to reveal effects due to the change in the properties of a solidifying binder under different sets of operating conditions for the technological process. At the same time, it once again confirms that thermal shrinkage makes a significantly larger contribution to the magnitude of the residual stresses than chemical shrinkage. The absolute values of the stresses are in satisfactory agreement with results that were obtained using simpler calculational schemes.Moscow Power Institute. Translated from Mekhanika Polimerov, No. 5, pp. 790–795, September–October, 1976.     

Anisotropy in the destruction of compact bone material

Conclusions 1. The nature of the destruction of compact bone material upon short-term static compressive and tensile stresses, as well as upon impact bending, is a function of the anistropy of the structure on the osteon level.2. The compact bone material of femoral bones of the age range studied is destroyed by shear for the types of stresses indicated.3. The nature of the destruction of samples of compact bone material for the stresses studied may be generalized for tubular bones.Kurgan Scientific-Research Institute of Experimental and Clinical Orthopedics and Traumatology. Translated from Mekhanika Polimerov, No. 2, pp. 319–324, March–April, 1978.     

Relationship between the normal and shear stresses in elastico-viscous liquid flow

A class of elastico-viscous liquids is considered. On the basis of an analysis of the experimental data of a considerable number of authors it is shown that the Weissenberg relation between the shear stresses and the first difference of the normal stresses is limited and a more general expression of the exponential type is proposed.Institute of Thermophysics, Siberian Division, Academy of Sciences of the USSR, Novosibirsk. Translated from Mekhanika Polimerov, No. 1, pp. 126–128, January–February, 1970.     

Comparison of the temperature stresses in a free and in a constrained cylinder

The conditions under which the radial and peripheral stresses in a free and in a constrained cylinder coincide at the ends of the cylinder when the temperature distribution is axially symmetrical are considered.P. I. Baranov Central Institute for Aircraft Engine Construction, Moscow. Translated from Mekhanika Polimerov, No. 1, pp. 163–165, January–February, 1972.     

Effect of the nature of the solvent on the mechanical and adhesion properties of atactic polystyrene

The effect of the supermolecular structure on the internal stresses and adhesion of coatings obtained from solutions of atactic polystyrene has been investigated. The structure of the coatings depends on the nature of the solvent and is nonuniform with respect to the morphology, size, distribution, and state of order of the structural elements. The greatest strength and adhesion correspond to fibrillar structures.Kucherenko Central Scientific Research Institute of Building Structures, Moscow; Institute of Physical Chemistry, Academy of Sciences of the USSR, Moscow. Translated from Mekhanika Polimerov, No. 5, pp. 793–797, September–October, 1969.