Untersuchungen über das Verhalten organischer Mischphasen 9. Mitteilung Vergleich der binären Systeme Tetrahydrofuran mit Wasser,Methanol und Cyclohexan,Diäthyläther mit Wasser,Methanol und Cyclohexan und Tetrahydrofuran-Diäthyläther

Activities and mixing functions of the following binary systems at 25° C are discussed: 1. mixtures of tetrahydrofuran with water, methanol, and cyclohexane; 2. mixtures of diethyl ether with water, methanol, and cyclohexane, and 3. mixtures of tetrahydrofuran with diethyl ether. Comparison with similar systems shows that in systems containing methanol, the strongest interactions are formation and breaking of hydrogen bonds between alcohol molecules; interactions between methanol and ether molecules play a minor rǒle. Systems containing water exhibit two main kinds of interaction: formation and breaking of hydrogen bonds between water molecules, and formation of hydrogen bonds between water and ether molecules. Deviations from ideality are larger for diethyl ether than for tetrahydrofuran in water and methanol, and smaller in cyclohexane.     

Liquid–Liquid Equilibria of Oxygenate Fuel Additives with Water at 25°C: Ternary and Quaternary Aqueous Systems of Methyl tert-Butyl Ether and tert-Amyl Methyl Ether with Methanol or Ethanol

Experimental tie-line data have been determined for the ternary system water + methyl tert-butyl ether + tert-amyl methyl ether and the quaternary systems water + methanol + methyl tert-butyl ether + tert-amyl methyl ether, and water + ethanol + methyl tert-butyl ether + tert-amyl methyl ether at 25°C and ambient pressure. The experimental results have been satisfactorily correlated using the modified UNIQUAC and extended UNIQUAC models with ternary and quaternary, in addition to binary parameters.     

Phase equilibria of the quaternary system acetic acid—ethylene glycol monoethyl ether acetate—ethylene glycol monoethyl ether—water

The synthesis of ethylene glycol monoethyl ether acetate by esterification of ethylene glycol monoethyl ether with acetic acid is of industrial interest. The following experimental determinations were carried out: vapour—liquid equilibria of the binary systems acetic acid—ethylene glycol monoethyl ether acetate and acetic acid—ethylene glycol monoethyl ether; liquid—liquid equilibrium of the binary system water—ethylene glycol monoethyl ether acetate; solubility curves of the ternary systems water—ethylene glycol monoethyl ether acetate—ethylene glycol monoethyl ether and water—acetic acid—ethylene glycol monoethyl ether acetate.The parameters of a model able to describe the phase equilibria of the whole system have been identified. Liquid—liquid, as well as vapour—liquid equilibrium data, are satisfactorily correlated with an unique choice of parameters.     

Nanoscale morphology in sulphonated poly(Ether ether ketone)-based ionomeric membranes: Mesoscale simulations

The model of a proton-conducting membrane based on sulfonated aromatic poly(ether ether ketone) has been constructed in the context of the mesoscale-dynamics method. The structure of the polymer is represented as a linear adjusted sequence of polar and nonpolar chain units. The degree of sulfonation and water content in the system are the main parameters during calculations. The constructed model shows that microphase separation of hydrophilic and hydrophobic polymer chain units occurs even at small water contents. A spatial network of water domains that has walls made of polymer-matrix polar chain units is formed within the membrane volume. The estimation of the percolation threshold demonstrates that water domains form a penetrating system of channels at water contents as low as 5–9%. Analogous simulations have been performed for the well-studied Nafion-1100 membrane. Although the morphologies of hydrophilic channels in sulfonated aromatic poly(ether ether ketone) and Nafion differ substantially, their cross sections are close. The results make it possible to consider sulfonated aromatic poly (ether ether ketone) a possible alternative to Nafion during the development of proton-conducting membranes for new-generation fuel cells.     

Design of composite films and ultrathin membranes of interpolymer complexes

The formation of stoichiometric interpolymer complexes (IPCs) between the poly(vinyl ether) of ethyleneglycol and the copolymer of acrylic acid–butyl vinyl ether, between copolymers of vinyl ether of ethyleneglycol–butyl vinyl ether, and the copolymer of acrylic acid–vinylbutyl ether is demonstrated by conductimetric, potentiometric, viscometric and spectroturbidimetric methods in aqueous solution. The swelling/deswelling behavior of composite films derived from the IPC has been studied in water, alcohol and water–alcohol mixtures, depending on various factors. The formation of polyelectrolyte complexes (PECs) between the copolymer of acrylic acid–vinyl butyl ether and poly(vinyl ether of monoethanolamine) on a dimeric interface of water–butanol has been studied by the potentiometric method. The kinetics of PEC formation on a dimeric interface was measured and the activation energy of this process was calculated. Copyright © 2000 John Wiley & Sons, Ltd.     

Measurement of fuel oxygenates in tap water using solid-phase microextraction gas chromatography-mass spectrometry

The presence of alkyl ether fuel oxygenates in drinking water supplies has raised public health concerns because of possible adverse health effects from chronic exposure to these compounds. To enable large exposure studies exploring possible relationships between chronic exposure to alkyl ether fuel oxygenates and health effects, we developed an improved analytical method, using headspace solid-phase microextraction coupled with capillary gas chromatography and mass spectrometry. This method quantifies trace levels of methyl tertiary-butyl ether, ethyl tertiary-butyl ether, di-isopropyl ether, and tertiary-amyl methyl ether in tap water. The method achieves detection limits of less than 0.025 microg/L for all analytes and linear ranges of three orders of magnitude in the measurement of the alkyl ether fuel oxygenates in 5-mL tap water samples. The relative percentage of recoveries of the alkyl ether fuel oxygenates ranged from 97% to 105%. The relative standard deviation ranged from 2% to 6%. Methyl tertiary-butyl ether was detected in samples of tap water taken from geographically diverse regions of the United States. The improved throughput and sensitivity of this method will enable large epidemiologic field studies of the prevalence and magnitude of exposure to alkyl ether fuel oxygenates in the general population.     

Simultaneous determination of six hydrophilic ethers at trace levels using coconut charcoal adsorbent and gas chromatography/mass spectrometry

The main objective of the following study was to determine the efficiency of a method that uses coconut charcoal as a solid-phase extraction (SPE) adsorbent in order to simultaneously detect six hydrophilic ether species in water in the low microgram-per-liter range. The applied method was validated for quantification of ethyl tert-butyl ether, 1,4-dioxane, ethylene glycol dimethyl ether (monoglyme), diethylene glycol dimethyl ether (diglyme), triethylene glycol dimethyl ether (triglyme) and tetraethylene glycol dimethyl ether (tetraglyme). SPE followed by gas chromatography/mass spectrometry of the extracts using the selected ion monitoring mode allowed for establishing low detection limits in the range of 0.007–0.018 μg/L in ultrapure water and 0.004–0.020 μg/L in environmental samples. Examination of the method accuracy and precision resulted in a recovery greater than 86.8 % for each compound with a relative standard deviation of less than 6.6 %. A stability study established a 5-day holding time for the unpreserved water samples and extracts. Finally, 27 samples obtained from surface water bodies in Germany were analyzed for the six hydrophilic ethers. Each analyte was detected in at least eight samples at concentrations reaching 2.0 μg/L. The results of this study emphasize the advantage of the method to simultaneously determine six hydrophilic ether compounds. The outcome of the surface water analyses augments a concern about their frequent and significant presence in surface water bodies in Germany.     

Investigation of the micropolarity in reverse micelles of nonionic poly(ethylene oxide) surfactants using 4-nitropyridine-N-oxide as absorption probe

The micropolarities of the reverse micelle (RM) interior of nonionic poly(ethylene oxide) surfactants of the alkyl ether type (poly(ethylene oxide)[4] lauryl ether (C12E4, Brij 30)), alkyl-aryl ethers (poly(ethylene oxide)[4] nonylphenyl ether (C9PhiE4), poly(ethylene oxide)[5] nonylphenyl ether (C9PhiE5), and poly(ethylene oxide)[5] octylphenyl ether (C8PhiE5)), and poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers (Pluronics P123, F127) were investigated as a function of the water content by applying the absorption probe technique, using 4-nitropyridine-N-oxide (NP) as a probe. The change in the micellar aggregate micropolarity in different solvents (cyclohexane, decane, n-butanol, and n-butyl acetate) at various water contents has been investigated. The research was focused on the determination of the effects of surfactant structure and solvent type on the hydration degrees of the PEO chains in the region at the core limit, where the NP probe was located. All results regarding the polarities in RM and PEO/water calibration mixtures have been expressed in terms of Kosower's Z values, using the linear dependence of E(NP) on Kosower's Z. The PPO/butanol mixtures have also been used for RM in butanol as a reference system. The data revealed that local polarity in RM is dependent on the surfactant type, block copolymer composition, solvent nature, and water content. At the same water content, the results clearly indicate a lower hydration degree of triblock copolymers, as compared to the surfactants of the alkyl ether and alkyl-aryl ether type, but for P123 and F127 Pluronics in n-butanol the hydration is higher owing to the behavior of butanol as cosurfactant and to its hydration.     

Complex Formation of Crown Ethers with Cations in Water–Organic Solvent Mixtures. Part IV. Thermodynamics of Interaction of Na+ Ion with Benzo-15-crown-5 Ether in the Mixtures of Water with Acetonitrile at 298.15 K

The equilibrium constants of complex formation of benzo-15-crown-5 ether with sodium ion have been determined by molar conductance at various molar ratios of benzo- 15-crown-5 ether and sodium iodide in mixtures of water with acetonitrile at 298.15 K. The thermodynamic quantities of complex formation of benzo-15-crown-5 ether with sodium cation are calculated. The enthalpy of solvation of benzo-15-crown-5 ether and sodium ion complex is discussed together with solvation enthalpies of the cation and ligand. The contribution of the benzene ring to the thermodynamic properties of complex formation and to the enthalpy of solvation of the crown ether/ Na⁺ complex in the mixtures of water with acetonitrile are analyzed and discussed.     

Determination of trace water in organic solvents by a spectrofluorimetric method

A new method for the spectrofluorimetric determination of water in organic solvents has been developed. It is based on formation of the exciplex of pyridoxal with water. The procedure is sensitive, reproducible and useful for the determination of trace water in cyclohexane, petroleum ether, benzene, carbon tetrachloride, diethyl ether, tetrahydrofuran, dioxan, etc. The solubility of water in benzene at various temperatures has been determined.     

Palladium-indium iodide-mediated allylation and propargylation of glyoxylic oxime ether and hydrazone: the role of water in directing the diastereoselective allylation

Allylation and propargylation of glyoxylic oxime ether in the presence of a catalytic amount of palladium(0) complex and indium(I) iodide were studied. Excellent diastereoselectivities in allylation were achieved in the presence of water, although low diastereoselectivities were observed in the absence of water. Propargylation of glyoxylic oxime ether proceeded with good diastereoselectivities in the presence of LiBr or LiCl.     

Difference spatial distribution function analysis of aqueous solutions. II. Hydration structures of dimethyl ether, 180 degrees ethyl methyl ether and 0 degree ethyl methyl ether solutions

Monte Carlo simulations are systematically presented to demonstrate the influence of the hydrophobic group's steric bulk on hydration structure. We have simulated a dimethyl ether (DME), two conformations for ethyl methyl ether (0 degree EME and 180 degrees EME), and 0 degree ethanol solutions. Spatial distribution function (SDF), goo(x,y,z) and difference SDF (DSDF), delta goo(x,y,z), obtained from MC simulation in an infinitely dilute aqueous solution of ether show the three-dimensional probability of an atom-atom pair distribution between solute and solvent atoms. Based on the results of SDF in an infinitely dilute aqueous solution of ether, the distribution of hydration water molecules can be divided into hydrogen acceptor (HA) and hydrophobic hydration (HH), regions, and the spatial orientation of the hydrogen-bonded water in the HA region is found to form a triple-layer structure, as it does in alcohol solutions. From the results of an analysis of the DSDF delta goo(x,y,z) between the SDFs of EME and DME, it is apparent that the distribution changes of hydration water molecules in ether solutions are essentially similar to those in the alcohol solutions. Further, we show that the hydration water molecules are distributed mainly in the stable area in the binding energy's (BE) contour maps for each region.     

Effect of a thin spreading solvent film on the efficiency of the hexadecan-1-ol monolayer deposited for water evaporation retardation

The influence of a thin spreading solvent film (ethanol, diethyl ether, and three fractions of petroleum ether boiling at 30–60 °C, 60–90 °C, and 90–120 °C) on the properties of hexadecan-1-ol (C₁₆H₃₃OH) monolayers at the air—water interface was studied. The specific evaporation resistance and the surface pressure were determined to describe the spreading behavior of the C₁₆H₃₃OH monolayers. The physical properties of the solvents and the images obtained in an atomic force microscope were examined. The time of establishing the equilibrium spreading surface pressure of monolayers can be reduced using a more volatile solvent with a lower boiling point and a lower relative density. The influence of the monolayer nature on water evaporation corresponds to the order of changing the solvent spreading rate: petroleum ether (30–60 °C) > diethyl ether > ethanol > petroleum ether (60–90 °C) > petroleum ether (90–120 °C). The monolayers formed upon petroleum ether (30–60 °C) spreading form a film with a less deficient and relatively planar surface. When ethanol is used as a spreading solvent, water evaporation is accelerated rather than retarded, while petroleum ether (30–60 °C) is more appropriate for this purpose.     

固相萃取-高效液相色谱-串联质谱测定水中8种双酚-二环氧甘油醚

建立了水中8种双酚-二环氧甘油醚（双酚A二缩水甘油醚（BADGE）及其衍生物双酚A（3-氯-2-羟丙基）甘油醚（BADGE·5HCl）、双酚A双（3-氯-2-羟丙基）醚（BADGE·52HCl）、双酚A（2,3-二羟丙基）甘油醚（BADGE·5H₂O）、双酚A双（2,3-二羟丙基）醚（BADGE·52H₂O）、双酚A（3-氯-2-羟丙基）（2,3-二羟丙基）醚（BADGE·5HCl·5H₂O）和双酚F-二环氧甘油醚（BFDGE）及其衍生物双酚F双（3-氯-2-羟丙基）醚（BFDGE·52HCl））的固相萃取-高效液相色谱-串联质谱（SPE-HPLC-MS/MS）测定方法。10个饮用水接触涂料样品在室温避光条件下,以超纯水浸泡（24±1）h,然后取200 mL经C₁₈固相萃取柱进行净化浓缩,以C₁₈色谱柱进行分离,以5 mmol/L醋酸铵、甲醇和水为流动相进行梯度洗脱,质谱多反应监测（MRM）模式检测,外标法定量。结果表明,8种双酚-二环氧甘油醚在0.007~5.00 μg/L线性关系良好,相关系数均大于0.9990,该方法对8种双酚-二环氧甘油醚的定量限为7~91 ng/L,回收率为79.1%~101%,RSD为4.0%~12%。该方法具有灵敏度高、选择性强的特点,能够满足水中双酚-二环氧甘油醚的快速检测和准确定量。     

Collision-induced dissociation studies of protonated ether--(H2O)n (n = 1-3) clusters

We have studied the protonated ether-(H2O)n (n = 1-3) complexes containing tetrahydrofuran, dimethyl, diethyl, dibutyl, and butylmethyl ethers using a flowing afterglow triple-quadrupole mass spectrometer. Collision-induced dissociation, CID, of all clusters with n = 1, 2 shows sequential water loss. The n = 3 cluster of dimethyl ether shows sequential water loss, while all other ether clusters display selective product formation. The CID spectra are interpreted based on known energetics, and theoretical studies of the dimethyl and diethyl ether systems.     

Tetraphenyldipyranyl ether

The formation of a dipyranyl ether was observed during a study of the reaction of a -unsubstituted pyrylium salt with water in the presence of organic bases. The use, in this reaction, of excess water in conjunction with sodium bicarbonate led to a significant improvement in the synthesis of this ether. The method was extended to the synthesis of dithiapyranyl ether.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1454–1455, November, 1970.     

Optimized structures and vibration frequencies of the ether–water complex: a DFT and FTIR study

The infrared spectrum of ether was studied using Fourier transform infrared spectroscopy in conjunction with the density functional theory (DFT). The optimized structures and vibrational frequencies of the ether·(H₂O) _n (n = 1–3) complexes were obtained at B3LYP/6-31G(d) theory levels. Compared to those of free-form ether, the C–O stretching vibrational frequencies of the ether–water complexes are found to shift to red by up to 39 cm^?1 with an increase in the C–O length of 0.016 Å. Meanwhile, the frequency of the O–H stretching modes of water in the complexes appears significantly redshifted to a varying degree. The DFT calculations suggest that these shifts are caused by the hydrogen bonding between ether and water.     

粉状白钨酸的研究(Ⅴ)——12-钨磷酸的直接制备以及用正丁醚的提纯法

12-钨磷酸的应用,近年来发展迅速,有从实验室合成转为工业生产的趋势。本报告从E.Drechsel法的以钨酸钠和磷酸氢二钠为原料,改为以活性粉状白钨酸为原料,与磷酸直接反应,即成12-钨磷酸溶液。这样便可以免除Drechscl乙醚萃取法中大量盐酸的使用。在提纯时,把在Drechsel方法中所用的乙醚,改为沸点高的正丁醚,配合适当少量的盐酸,可以得到相应的(钅羊)盐油状物。并由于该(钅羊)盐安定度较差,用水反萃取即可使12-钨磷酸转入水溶液,经过浓缩即可得到12-钨磷酸晶体。回收的正丁醚,毋需蒸馏,可以反复使用。     

pH‐Responsive Supramolecular Polymerization in Aqueous Media Driven by Electrostatic Attraction‐Enhanced Crown Ether‐Based Molecular Recognition

All the previously reported supramolecular polymers based on crown ether‐based molecular recognition have been prepared in anhydrous organic solvents. This is mainly due to the weakness of crown ether‐based molecular recognition in the presence of water. Here we report a linear supramolecular polymer constructed from a heteroditopic monomer in an aqueous medium driven by crown ether‐based molecular recognition through the introduction of electrostatic attraction. In addition, the reversible transition between the linear supramolecular polymer and oligomers is achieved by adding acid and base. This study realizes the breakthrough of the solvent for supramolecular polymerization driven by crown ether‐based molecular recognition from anhydrous organic solvents to aqueous media. It is helpful for achieving supramolecular polymerization driven by crown ether‐based molecular recognition in a completely aqueous medium.