Ester phenyl-as-triazine and ester phenylquinoxaline polymers

A series of new high molecular weight soluble ester phenyl-as-triazine and ester phenyl-quinoxaline polymers were prepared by solution cyclopolycondensation of oxalamidrazone or 3,3′-diaminobenzidine, respectively, with various bis(benzilyl)esters. Ester groups are incorporated within the backbone of the polymer chain and also as pendant groups on the heterocyclic ring. By TGA in air, initial weight losses for the all-aromatic polyester phenyl-as-triazines and polyester phenylquinoxalines began at ca. 350 and 400°C, respectively. Films of ester phenyl-as-triazine and ester phenylquinoxaline polymers exhibited good thermo-oxidative stability after aging in circulating air at 232 and 288°C, respectively. Two phenylquinoxaline model compounds were also prepared.     

Synthesis and characterization of phenylated pyrazino-benzimidazophenanthroline polymers

Novel phenylated quinoxaline tetraamines have been prepared and polymerized with 1,4,5,8-naphthalenetetracarboxylic acid in polyphosphoric acid solution. The resulting BBB-type polymers with pendant phenyl groups along the polymer backbone are soluble in m-cresol. The polymers, with inherent viscosities ranging from 0.3 to 0.6 dl/g in sulfuric acid, exhibited thermal stabilities near 500°C under nitrogen and near 400°C in air.     

Linear diacetylene polymers containing bis(dimethylsilyl) phenyl and/or bis-(tetramethyldisiloxane) carborane residues: Their synthesis,characterization and thermal and oxidative properties

A series of inorganic-organic linear diacetylenic hybrid polymers ( 5a–e ) were prepared by the polycondensation reaction of 1,4-dilithiobutadiyne with 1,4-bis(dimethylchlorosilyl)benzene and/or 1,7-bis(tetramethylchlorodisiloxane)-m-carborane. Their structures were characterized using FTIR, and ¹³C and ¹H NMR spectroscopies, and their thermal and oxidative properties were evaluated by DSC and TGA analyses. The hybrid polymers exhibited solubility in common organic solvents and were viscous liquids or low melting solids at room temperature. Broad prominent exotherms, attributed to reaction of the diacetylenic units, were observed by DSC in the 306°C to 354°C temperature range. When 5a–e were analyzed by TGA to 1000°C under nitrogen, weight retention between 79 and 86% were obtained. Ageing studies, performed at elevated temperatures in air on a thermoset and a ceramic obtained from polymer 5b , showed this system to have excellent thermal and oxidative stability. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2387–2391, 1997     

Synthesis and properties of polyoxyarylenesiloxanes

High molecular weight polymers containing oligosiloxanes in the backbone were made by the reaction of aromatic diols with α,ω-diaminosiloxane homologs. The glass transition temperatures dropped by 30–40°C in a homologous series with each siloxane added. The thermal stability also suffered when increasing the number of siloxane groups. The polymers all displayed high % char measurements and one polymer (disiloxane) tested had a V₀ rating by UL-94 testing. The trisiloxane-containing polymer had a high percent elongation at break (>300%). All the polymers tested were fairly susceptible to hydrolysis. © 1994 John Wiley & Sons, Inc.     

A new series of organoboranes. VII. The preparation of poly-m-carboranylenesiloxanes

This paper describes the preparation of the first members of a new series of polysiloxanes characterized by having m-carborane nuclei in the backbone of the polymers. Although neither hydrolysis of 1,7-bis(chlorodialkylsilyl)-m-carborane monomers nor catalytic dehydration of the corresponding dihydroxy compounds would proceed to give the type of polysiloxanes desired, the polymers were readily prepared by the ferric chloridecatalyzed elimination of an alkyl halide from equimolar mixtures of dichloro- and dialkoxysilanes. This technique allowed the systematic introduction of dialkylsiloxy groups between m-carborane nuclei. Characterization of the polymers is described as well as differential scanning calorimetry studies which show the prime members of the series to be thermally stable to 500°C. and oxidatively stable to about 350°C.     

Diacetylene–siloxane–carborane thermosets and ceramic precursors

Thermosets and ceramic chars were prepared and characterized from a diacetylene–siloxane–carborane polymer, DSCS, and a diacetylene–siloxane polymer, DS. The goal was to incorporate the known thermo‐oxidative stability found in the siloxane–carborane elastomers into high‐performance thermosets and ceramic chars. The DSCS thermoset had excellent thermo‐oxidative stability as determined by a low weight loss and tough residue after annealing for 100 h in air at 300 °C, but it had a low glass transition temperature (94 °C). The DS thermoset did not undergo a glass transition below 350 °C and had a low weight loss on thermo‐oxidative aging, but the residue was quite brittle. Two random copolymers were made to optimize the thermo‐oxidative stability and toughness of the DSCS thermoset and the higher glass transition of the DS thermoset. Significantly, the 50:50 DSCS/DS random copolymer when cured to a thermoset did not undergo a glass transition below 350 °C, yet retained much of the strength, toughness and thermo‐oxidative stability of the DSCS thermoset. Heat treatment of the poly‐DSCS to elevated temperatures resulted in a ceramic material with improved properties relative to the ceramic derived from poly‐DS. Both polymers had similar char yields to 800 °C, but the poly‐DSCS solidified to a 15% denser ceramic. Copyright © 2000 John Wiley & Sons, Ltd.     

Liquid crystalline lonomers. I. Main-chain liquid crystalline polymer containing pendant sulfonate groups

Liquid crystalline polymers containing sodium sulfonate groups pendant to the polymer backbone were synthesized by an interfacial condensation reaction of brilliant yellow, a sulfonate-containing monomer, with 4,4′-dihydroxy-α,α′-dimethyl benzalazine and a 50/50 mixture of sebacoyl and dodecanedioyl dichlorides. Polymers containing up to ca. 4 mol% brilliant yellow were characterized by elemental analysis and ultraviolet spectroscopy. The polymers were thermally stable to about 300°C, and they exhibited a broad nematic mesophase region of 70–100°C. The solution viscosity behavior in chloroform suggested that intramolecular associations of the sulfonate groups occurred at low polymer concentrations and intermolecular associations predominated at higher concentrations.     

Thermal degradation of poly(tetramethyl-p-silphenylene) siloxane homopolymers and copolymers in nitrogen

The thermogravimetry (TGA) in nitrogen was measured for poly(tetramethyl-p-silphenylene)-siloxane (TMPS) fractions with narrow molecular weight distributions and for block copolymers of TMPS and dimethyl siloxane (DMS) with varying composition. The measurements were made with the Perkin-Elmer DCS IB-TGA attachment which consists of a Cahn electrobalance and a wire-wound furnace with programmable temperature controls. The weight loss curves for heating rates of 10, 20, and 40°C/min were analyzed using the method of Flynn and Wall. The analysis indicates that thermal degradation proceeds primarily by scission of the siloxane bond with an activation energy of 44 ± 3 kcal/mole for the uncatalyzed reaction and 13 ± 2 kcal/mole for the reaction occurring in the presence of residual catalyst. The thermal stability of the TMPS–DMS copolymer is impaired through increasing the concentration of the DMS component. Cyclic DMS trimer and TMPS monomer and dimer were observed by mass spectrometry which gave results consistent with the proposed mechanism of degradation.     

D2-meta-carborane-siloxanes. IV. Synthesis of linear,high molecular weight polymers

A new facile route to linear, high molecular weight D₂-meta-decacarborane-siloxanes was developed based on the condensation reaction between bisureidosilanes and carborane disilanol. By using NMR to monitor the reaction stoichiometry, polymers with molecular weight ≥250,000 have been prepared. Moreover, because of the mild reaction conditions, structural modifications of the polymer backbone have been readily achieved. These linear, high molecular weight polymers overcome the fabrication difficulties encountered in previously prepared D₂-polymers.     

Polymerizable siloxane precursors having in-chain perfluoroalkyl groups

The synthesis and polymerization of several silphenylene siloxane polymer precursors containing a perfluoroalkylsegment in the backbone was carried out. The molecular weight characteristics of polymers from 1,3-bis[p(-hydroxydimethylsilyl)phenyl]hexafluoropropane and 1,3-bis[p(-dimethylaminodimethylsilyl)phenyl]hexafluoropropane were studied as a function of polymerization conditions. Polymers containing the dodecafluorohexane chain segment were also prepared. Polymers having inherent viscosities of 0.55 to 0.9 were obtained. The polymers crosslinked at room temperature to thermoset elastomers which were characterized by improved thermal and oxidative stability over dimethylsilicones. Room temperature swelling of the experimental polymers hydrocarbon solvents was also much lower than that of dimethylsilicones. The polymers containing the (CF₂)₃ and (CF₂)₆ linkages had glass transition points of ?12°C and ?34°C, respectively.     

Semi-fluorinated polyarylenes: Microwave-assisted synthesis and structure–property relationships

A series of three fluorine containing and three non-fluorinated Diels–Alder step-growth polyarylene polymers and copolymers was synthesized via conventional oil bath heating (days/weeks). A drastic time reduction was realized with a microwave-assisted polymerization (hours). The polymers were characterized by multinuclear (¹H, ¹³C, and ¹⁹F) NMR and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, thermal analysis (thermogravimetric analysis [TGA], differential scanning calorimetry [DSC], and dynamic mechanical analysis [DMA]), gel permeation chromatography, X-ray diffraction (XRD), water contact analysis, and refractive index (RI) measurements. The NMR spectra indicated a mixture of para and meta conformations through the polymer backbone increasing to more para with greater fluorine content. TGA revealed the fluorine-containing polyarylenes possessed the highest char yields at almost 80% at 1000°C under nitrogen, and all the polyarylenes possessed onset of degradation temperatures above 550°C under nitrogen and air atmospheres. XRD analysis indicated more ordering for the fluorine-containing polyarylenes which afforded the high char yields. DMA gave storage moduli values in the range of 1–10 GPa for the polyarylenes. Molecular weights for all samples were above 100 kg/mol. Water contact angles did not change with fluorine content due to the shielding effect of the pendant phenyl groups. However, the RI decreased to 1.6497 at 632.8 nm for the polyarylene with the highest fluorine content.     

Synthesis and characterization of aromatic poly(ether ketone)s containing cyclotriphosphazene units

Bis(4-oxybenzoic acid) tetrakis(phenoxy) cyclotriphosphazene (IUPAC name: 4-[4-(carboxyphenoxy)-2,4,6,6-tetraphenoxy-1,3,5,2λ⁵,4λ⁵,6λ⁵-triazatriphosphinin-2-yl]oxy-benzoic acid) was synthesized and direct polycondensed with diphenylether or 1,4-diphenoxybenzene in Eaton's reagent at the temperature range of 80–120°C for 3 hours to give aromatic poly(ether ketone)s. Polycondensations at 120°C gave polymer of high molecular weight. Incorporation of cyclotriphosphazene groups in the aromatic poly(ether ketone) backbone greatly enhanced the solubility of these polymers in common organic polar solvents. Thermal stabilities by TGA for two polymer samples of polymer series ranged from 390 to 354°C in nitrogen at 10% weight loss and glass transition temperatures (T_g) ranged from 81.4 to 89.6°C by DSC. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1227–1232, 1998     

Synthesis and characterization of random hydrophilic/hydrophobic copolymers of styrene and D-lactose-O-vinylbenzylhydroxime

D -Lactose-O-(vinylbenzyl)oxime (LVO), prepared from α-D -lactose and [O-(vinylbenzyl)oxy]amine ( 1 ) was copolymerized with styrene (ST) in dimethylsulfoxide (DMSO)-toluene (1 : 1, v/v) at 65°C using 2,2′-azobisisobutyronitrile (AIBN) as a free radical initiator. The polymerization was rapid when using AIBN as the initiator. The resultant copolymers were characterized by elemental analyses, infrared, viscometry, TGA, DSC, and ¹H-NMR spectroscopy. The poly(ST-co-LVO) had an intrinsic viscosity in the range of 0.11–0.51 dL/g in DMSO at 30°C. The molecular weight was determined by gel permeation chromatography (GPC), and the molecular weight of the resulting polymers ranged from 2.11 × 10⁴ to 6.53 × 10⁷ with low polydispersities. The solubility of the copolymers with different monomer compositions in solvents of varied polarities was also studied. Incorporation of up to 65% (mol %) of lactose-based monomer onto polystyrene backbone led to a water-soluble polymer. Thermal behavior of the synthesized copolymers was evaluated by thermogravimetric analysis (TGA) and correlated very well with the polymer composition. Introduction of a pendant disaccharide compromised the thermal stability of the copolymer. The synthetic approach described in this report provides a route to prepare a novel disaccharide surfactant polymer with well-defined structures and hydrophilic/hydrophobic balances, by adjusting feed ratio of the lactose-based monomer ( 1 ) to styrene. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2971–2978, 1998     

Polyphenyl-as-triazines

High molecular weight soluble polyphenyl-as-triazines were prepared at ambient temperature in m-cresol by the cyclopolycondensation of 2,6-pyridinediyl dihydrazidine (diamidrazone) with various aromatic dibenzil type reactants. Clear lemon yellow films, which exhibited good toughness and flexibility, were cast from solution. The isolated yellow polymers readily formed clear yellow to orange solutions in chloroform or sym-tetrachloroethane at concentrations as high as 30% solids. By TGA, polyphenyl-as-triazines exhibited a two-stage decomposition, commencing at ～400°C, in both air and nitrogen. The polymers exhibited excellent stability at 260°C (500°F) in air, but at 290°C (554°F) significant weight losses occurred. Initial evaluation as an adhesive and resin matrix in Morganite I composites demonstrated the potential of polyphenyl-as-triazines as structural resins. Prior to polymer work, a series of model compounds were prepared and characterized.     

Hydrocarbon ladder aromatics from a Diels-Alder reaction

The Diels-Alder homopolycycloaddition of 2,5-diphenyl-3,4-(5,6-acenaphthylenylene)-cyclopentadienone (VIII) affords a low molecular weight soluble ladder polymer having reduced specific viscosities between 0.17 and 0.25 dl/g in benzene and an insoluble fraction of higher molecular weight. The ladder polymers exhibited a major TGA break at 450°C in an air atmosphere and lost approximately 30% of their weight at 700°C in a nitrogen atmosphere.     

Poly(Ether sulfone)s made from 4,4′-dihydroxystilbene and 4,4′-difluorodiphenylsulfone: Synthesis,crosslinking, and epoxidation with hydrogen peroxide

High molecular weight polymers from trans-4,4′-dihydroxystilbene, bisphenols, and 4,4′-difluorodiphenylsulfone were synthesized by a nucleophilic displacement reaction using DMAc as solvent in the presence of potassium carbonate. Characterization and crosslinking studies of these polymers were carried out by DSC, TGA, TMA, x-ray diffraction, and solution and solid NMR. It was found that all polymers can be crosslinked to some extent on heating to 350°C. We also studied the epoxidation of these polymers with hydrogen peroxide in the presence of methyltrioctylammonium tetrakis (diperoxotungsto) phosphate (3—) as the catalyst in a biphasic system. The epoxidized polymers are thermally cross-linkable. Very efficient crosslinking was obtained by heating the epoxidized polymers at 350°C under nitrogen. © 1995 John Wiley & Sons, Inc.     

Synthesis of thermally degradable epoxy adhesives

We have developed a new strategy for the synthesis of epoxide‐containing polymers where the pendant reactive groups are connected to the main backbone via thermally labile oxonorbornene groups. The polymers were synthesized by radical 1,4‐polymerization of the appropriate bicyclic diene monomer. The produced polymers can be crosslinked in the presence of a diamine and de‐crosslinked by thermal treatment at 160 °C, which induces retro‐Diels–Alder reaction and cleaves pendant groups from the polymer backbone, as confirmed by differential scanning calorimetry. The potential for the utilization of this polymer as a thermally removable adhesive was demonstrated by a simple adhesion test. This method provides access to thermally cleavable epoxy networks that can be quickly and irreversibly disintegrated into nonvolatile components upon heating to a specified temperature. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4992–4997     

o-Carborane-Containing Poly(siloxane-arylacetylene)s With Thermal and Thermo-Oxidative Stabilities

A series of poly(siloxane-arylacetylene)s with o-carborane in the backbone (CB-PSOA)s were prepared by the coupling reaction between poly(siloxane-arylacetylene) (PSOA) and decaborane (B₁₀H₁₄) in the presence of CH₃CN. CB-PSOAs were characterized by Fourier-transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and Pyrolysis–gas chromatography–mass spectrometry (Py–GC–MS). The results show that the average amount of carborane units in a CB-PSOA chain could be raised when the molar ratio of B₁₀H₁₄ to PSOA is increased from 0.6 to 2.4. The crosslinking reaction could be carried on at above 140°C for CB-PSOAs. The CB-PSOA thermosets show excellent thermo oxidative stability with over 85% residue yield at 1000°C in air.     

Dynamic mechanical properties of poly-α-olefins containing ring structures in side chains

Dynamic loss modulus curves have been determined over a temperature range beginning at liquid nitrogen temperature for poly-α-olefin polymers containing various ring structures, i.e., phenyl, cyclohexyl, cyclopentyl, and naphthyl, in the side chain. Glass transition and appropriate secondary relaxation temperatures were observed for each polymer. Separation of each pendant ring structure from the main backbone chain by successive additions of methylene units results in lower glass-transition temperatures. Comparison of polymers with similar side chains and different ring structures shows that the respective glass-transition temperatures decrease in the order naphthyl > cyclohexyl > phenyl > cyclopentyl. Secondary relaxation peaks were obtained at about ?150°C for polymers containing the cyclohexyl and cyclopentyl rings. A similar peak was observed for the polymer possessing a phenyl ring separated from the main chain backbone by two methylene units. The comparable polymer containing the naphthyl ring structure exhibited a broad secondary relaxation peak centered at ?20°C. The polymers possessing cyclohexyl rings separated from the main chain backbone by one or two methylene units had an additional low temperature peak at ?80°C. The molecular mechanism associated with this relaxation may be related to intramolecular transformations of the cyclohexyl ring between its “chair–chair” conformations.     

Synthesis and properties of conjugated enyne polysulfones

High-molecular-weight polysulfones that contained 1,3-enyne linkages in the polymer backbone were prepared by the reaction of potassium salts of (E)-1,3-bis(3-hydroxyphenyl)-1-buten-3-yne and 4,4′-dihydroxybiphenyl with 4,4′-dihalodiphenylsulfones in DMSO-sulfolane solvent mixtures. The polymers were soluble in methylene chloride and exhibited intrinsic viscosities as high as 0.74 (in DMAC at 30°C) with glass transition temperatures ranging from 179 to 214°C. It was postulated that on heating the polymers would cure via a intramolecular cycloaddition reaction to from a 2-phenylnaphthalene fused ring system along the polymer backbone. Thermal analytical data studies on cured polymer films and investigations of the products obtained from the thermal reactions of model compounds indicated that the primary curing reaction was intermolecular rather than intramolecular in nature. Additional data from testing fabricated composites indicated that the enyne polysulfones have suitable properties for use as high-temperature thermoplastic composite materials.