Core–Shell α‐Fe2O3@α‐MoO3 Nanorods as Lithium‐Ion Battery Anodes with Extremely High Capacity and Cyclability

α‐Fe₂O₃ nanoparticles are uniformly coated on the surface of α‐MoO₃ nanorods through a two‐step hydrothermal synthesis method. As the anode of a lithium‐ion battery, α‐Fe₂O₃@α‐MoO₃ core–shell nanorods exhibit extremely high lithium‐storage performance. At a rate of 0.1 C (10 h per half cycle), the reversible capacity of α‐Fe₂O₃@α‐MoO₃ core–shell nanorods is 1481 mA h g^?1 and a value of 1281 mA h g^?1 is retained after 50 cycles, which is much higher than that retained by bare α‐MoO₃ and α‐Fe₂O₃ and higher than traditional theoretical results. Such a good performance can be attributed to the synergistic effect between α‐Fe₂O₃ and α‐MoO₃, the small size effect, one‐dimensional nanostructures, short paths for lithium diffusion, and interface spaces. Our results reveal that core–shell nanocomposites have potential applications as high‐performance lithium‐ion batteries.     

Ceramic Filter Balls Loaded with α-Fe2O3 and Their Application to NH3-N Wastewater Treatment

Hydrolysis reaction of Fe(NO₃)₃ at a high temperature in the presence of urea as the homogeneous precipitant was studied. With the prepared ceramic filter balls loaded with α-Fe₂O₃ after high temperature calcination, the loading of α-Fe₂O₃ on the porous ceramic filter balls from Fe(NO₃)₃ solutions of different concentrations and mechanical stability of the loaded α-Fe₂O₃ were studied. The product was characterized using XRD and SEM. Adsorption experiments were conducted to evaluate the performance of the product in adsorbing NH₃-N. It turned out that the specific surface area of the ceramic filter balls loaded with α-Fe₂O₃ had increased to 36.5387 m²/g from original 4.6127 m²/g. When the concentration of Fe(NO₃)₃ was 0.40 mol/L, the loading of α-Fe₂O₃ on the ceramic filter balls accounted for 8.4% of the total mass of the adsorbent and α-Fe₂O₃ was adsorbed on the filter balls very well. The adsorption isotherm of NH₃-N on the ceramic filter ball adsorbent loaded with α-Fe₂O₃ was of Langmuir type. The saturated adsorption capacity was 3.33 mg/L, and the adsorption constant K was 0.1873. NH₃-N was adsorbed by α-Fe₂O₃ more easily, which was a kind of specific adsorption.     

Hydrothermal Synthesis and Properties of Controlled α‐Fe2O3 Nanostructures in HEPES Solution

A facile, template‐free, and environmentally friendly hydrothermal strategy was explored for the controllable synthesis of α‐Fe₂O₃ nanostructures in HEPES solution (HEPES=2‐[4‐(2‐hydroxyethyl)‐1‐piperazinyl]ethanesulfonic acid). The effects of experimental parameters including HEPES/FeCl₃ molar ratio, pH value, reaction temperature, and reaction time on the formation of α‐Fe₂O₃ nanostructures have been investigated systematically. Based on the observations of the products, the function of HEPES in the reaction is discussed. The different α‐Fe₂O₃ nanostructures possess different optical, magnetic properties, and photocatalytic activities, depending on the shape and size of the sample. In addition, a novel and facile approach was developed for the synthesis of Au/α‐Fe₂O₃ and Ag/α‐Fe₂O₃ nanocomposites in HEPES buffer solution; this verified the dual function of HEPES both as reductant and stabilizer. This work provides a new strategy for the controllable synthesis of transition metal oxide nanostructures and metal‐supported nanocomposites, and gives a strong evidence of the relationship between the property and morphology/size of nanomaterials.     

α‐Fe2O3 Film with Highly Photoactivity for Non‐enzymatic Photoelectrochemical Detection of Glucose

A non‐enzyme photoelectrochemical (PEC) glucose sensor based on α‐Fe₂O₃ film is investigated. The α‐Fe₂O₃ film was fabricated via a simple spin coating method. The proposed glucose sensor exhibits good selectivity, a fast response time of <5 s, a linear range of 0.05 to 6.0 mM, sensitivity of 17.23 μA mM^?1 cm^?2 and a detection limit of 0.05 μM. Meanwhile, the excellent performances of the α‐Fe₂O₃ sensor were obtained in reproducibility and the long‐term stability under ambient condition. The linear amperometric response of the sensor covers the glucose levels in physiological and clinical for diabetic patients. Therefore, this non‐enzyme PEC sensor based on α‐Fe₂O₃ film has a great potential application in the development of glucose sensors.     

Novel electromagnetic functionalized γ‐Fe2O3/polypyrrole composite nanostructures with high conductivity

In general, the conductivity of polypyrrole (PPy) is reduced by addition of magnetic nanoparticles as the additives owing to insulating effect of magnetic nanoparticles. In this article, novel electromagnetic functionalized PPy composite nanostructures were prepared by a template‐free method associated with γ‐Fe₂O₃ nano‐needles as the hard templates in the presence of p‐toluene‐sulfonic acid (p‐TSA) and FeCl₃·6H₂O as the dopant and oxidant, respectively. It was found that the molar ratio of γ‐Fe₂O₃ to pyrrole monomer represented by [γ‐Fe₂O₃]/[Py] ratio strongly affected the morphology and the conductivity of the γ‐Fe₂O₃/PPy composite nanostructures. A growth mechanism for the composite nanostructures was proposed based on the variance of the morphology with the [γ‐Fe₂O₃]/[Py] ratio. Compared with previously reported γ‐Fe₂O₃/PPy composites, the as‐prepared novel composite nanostructures showed much higher conductivity (up to ～50 times higher). Moreover, the synthesized γ‐Fe₂O₃/PPy composite nanostructures displayed ferromagnetic behavior with a high coercive force. Explanations for these interesting observations were made in terms of the magnetic interaction between ferromagnetic γ‐Fe₂O₃ nano‐needles and spin‐polaron of PPy nanotubes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4446–4453, 2009     

Constructing Hierarchical Tectorum‐like α‐Fe2O3/PPy Nanoarrays on Carbon Cloth for Solid‐State Asymmetric Supercapacitors

The design of complex heterostructured electrode materials that deliver superior electrochemical performances to their individual counterparts has stimulated intensive research on configuring supercapacitors with high energy and power densities. Herein we fabricate hierarchical tectorum‐like α‐Fe₂O₃/polypyrrole (PPy) nanoarrays (T‐Fe₂O₃/PPy NAs). The 3D, and interconnected T‐Fe₂O₃/PPy NAs are successfully grown on conductive carbon cloth through an easy self‐sacrificing template and in situ vapor‐phase polymerization route under mild conditions. The electrode made of the T‐Fe₂O₃/PPy NAs exhibits a high areal capacitance of 382.4 mF cm⁻² at a current density of 0.5 mA cm⁻² and excellent reversibility. The solid‐state asymmetric supercapacitor consisting of T‐Fe₂O₃/PPy NAs and MnO₂ electrodes achieves a high energy density of 0.22 mWh cm⁻³ at a power density of 165.6 mW cm⁻³.     

3D Porous Carbon Framework Stabilized Ultra‐Uniform Nano γ‐Fe2O3: A Useful Catalyst System

We present a novel strategy for the scalable fabrication of γ‐Fe₂O₃@3DPCF, a three‐dimensional porous carbon framework (PCF) anchored ultra‐uniform and ultra‐stable γ‐Fe₂O₃ nanocatalyst. The γ‐Fe₂O₃@3DPCF nanocomposites were facilely prepared with the following route: condensation of iron(III) acetylacetonate with acetylacetonate at room temperature to form the polymer precursor (PPr), which was carbonized subsequently at 800 °C. The homogeneous aldol condensation offered an ultra‐uniform distribution of iron, so that the γ‐Fe₂O₃ nanoparticles (NPs) were uniformly distributed in the 3D carbon architecture with the average size of approximate 20 nm. The Fe₂O₃ NPs were capped with carbon, so that the iron oxide maintained its γ‐phase instead of the more stable α‐phase. The nanocomposite was an excellent catalyst for the reduction of nitroarene; it gave >99 % conversion and 100 % selectivity for the reduction of nitroarenes to the corresponding anilines at 100 °C. The fabrication of the γ‐Fe₂O₃@3DPCF nanocatalyst represents a green and scalable method for the synthesis of novel carbon‐based metal oxide nanostructures.     

6‐TIPS‐β‐Cyclodextrin‐Modified Fe3O4 for Facile Enantioseparation of 1‐(1‐Naphthyl)ethylamine

A new type of chiral magnetic nanoparticle was prepared from covalently linked magnetic nanoparticles (Fe₃O₄) and heptakis‐(6‐O‐triisopropylsilyl)‐β‐cyclodextrin (6‐TIPS‐β‐CD). The resulting selectors (TIPS‐β‐CD‐MNPs) combined the good magnetic properties Fe₃O₄ and efficient chiral recognition ability of 6‐TIPS‐β‐CD. The enantioselectivity of TIPS‐β‐CD‐MNPs towards 1‐(1‐naphthyl)ethylamine was six times higher than that of the parent β‐CD modified Fe₃O₄ particles.     

α‐Fe2O3 Cubes with High Visible‐Light‐Activated Photoelectrochemical Activity towards Glucose: Hydrothermal Synthesis Assisted by a Hydrophobic Ionic Liquid

A liquid/liquid interfacial reaction system was designed to fabricate α‐Fe₂O₃ cubes. The reaction system uses a hydrophobic ionic liquid containing iron ions ([(C₈H₁₇)₂(CH₃)₂N]FeCl₄) for manufacturing α‐Fe₂O₃ cubes by a novel and environmentally friendly hydrothermal method under low‐temperature conditions (140 °C). The iron‐containing ionic liquid is hydrophobic and can form a liquid/liquid interface with water, which is vital for fabrication of the α‐Fe₂O₃ cubes. Nanomaterials synthesized from hydrophobic iron‐containing ionic liquids show good crystallinity, well‐developed morphology, and uniform size. The effect of different ionic liquids on the morphology of α‐Fe₂O₃ was investigated in detail. [(C₈H₁₇)₂(CH₃)₂N]FeCl₄ is assumed to perform the triple role of forming a liquid/liquid interface with water and acting as reactant and template at the same time. The effect of the reaction temperature on the formation of the α‐Fe₂O₃ cubes was also studied. Temperatures lower or higher than 140 °C are not conducive to formation of the α‐Fe₂O₃ cubes. Their photoelectrochemical properties were tested by means of the transient photocurrent response of electrodes modified with as‐prepared α‐Fe₂O₃ cubes. The photocurrent response of an α‐Fe₂O₃ cubes/indium tin oxide electrode is high and stable, and it shows great promise as a photoelectrochemical glucose sensor with high sensitivity and fast response, which are beneficial to practical applications of nanosensors.     

Efficient Noble‐Metal‐Free γ‐Fe2O3@NiO Core–Shell Nanostructured Photocatalysts for Water Oxidation

Flowerlike noble‐metal‐free γ‐Fe₂O₃@NiO core–shell hierarchical nanostructures have been fabricated and examined as a catalyst in the photocatalytic oxidation of water with [Ru(bpy)₃](ClO₄)₂ as a photosensitizer and Na₂S₂O₈ as a sacrificial electron acceptor. An apparent TOF of 0.29 μmols^?1 m^?2 and oxygen yield of 51 % were obtained with γ‐Fe₂O₃@NiO. The γ‐Fe₂O₃@NiO core–shell hierarchical nanostructures could be easily separated from the reaction solution whilst maintaining excellent water‐oxidation activity in the fourth and fifth runs. The surface conditions of γ‐Fe₂O₃@NiO also remained unchanged after the photocatalytic reaction, as confirmed by X‐ray photoelectron spectroscopy (XPS).     

Self‐assembled three‐dimensional flower‐like α‐Fe2O3 nanostructures and their application in catalysis

Three‐dimensional flower‐like α‐Fe₂O₃ nanostructures have been successfully synthesized by a simple surfactant‐free environmental friendly solvolthermal process. The as‐prepared products were investigated by X‐ray powder diffraction, transmission electron microscopy, and field emission scanning electron microscopy. By adjusting the synthetic parameters, the shape of the α‐Fe₂O₃ nanostructures can be controlled. The three‐dimensional flower‐like α‐Fe₂O₃ nanostructures were found to be highly active as catalysts for phenol alkylation. The effects of various parameters, such as reaction temperature, reaction time and the amount of catalyst, were studied. The catalyst was stable and could be reused three times in normal atmosphere without suffering appreciable loss in catalytic activity. Copyright © 2009 John Wiley & Sons, Ltd.     

Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe2O3@TiO2 (γ‐Fe2O3@TiO2‐EG‐Cu(II)): A highly efficient magnetically separable heterogeneous nanocatalyst for one‐pot synthesis of highly substituted imidazoles

A simple, efficient and eco‐friendly procedure has been developed using Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe₂O₃@TiO₂ (γ‐Fe₂O₃@TiO₂‐EG‐Cu(II)) for the synthesis of 2,4,5‐trisubstituted and 1,2,4,5‐tetrasubstituted imidazoles, via the condensation reactions of various aldehydes with benzil and ammonium acetate or ammonium acetate and amines, under solvent‐free conditions. High‐resolution transmission electron microscopy analysis of this catalyst clearly affirmed the formation of a γ‐Fe₂O₃ core and a TiO₂ shell, with mean sizes of about 10–20 and 5–10 nm, respectively. These data were in very good agreement with X‐ray crystallographic measurements (13 and 7 nm). Moreover, magnetization measurements revealed that both γ‐Fe₂O₃@TiO₂ and γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) had superparamagnetic behaviour with saturation magnetization of 23.79 and 22.12 emu g^?1, respectively. γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) was found to be a green and highly efficient nanocatalyst, which could be easily handled, recovered and reused several times without significant loss of its activity. The scope of the presented methodology is quite broad; a variety of aldehydes as well as amines have been shown to be viable substrates. A mechanism for the cyclocondensation reaction has also been proposed.     

Perylene diimide‐modified magnetic γ‐Fe2O3/CeO2 nanoparticles as peroxidase mimics for highly sensitive colorimetric detection of Vitamin C

Perylene diimide‐modified magnetic γ‐Fe₂O₃/CeO₂ nanoparticles (γ‐Fe₂O₃/CeO₂‐PDI) were prepared and exhibited excellent peroxidase‐like activity. The samples were characterized by HR‐TEM, XRD, Raman, N₂ adsorption, magnetic strength and XPS. The obtained γ‐Fe₂O₃/CeO₂‐PDI had size of 10~20 nm with high specific surface area of 77 m²/g, and could be easily separated from the aqueous solution by using a magnet, which are in favor of its practical application. Due to the decoration of PDI, the γ‐Fe₂O₃/CeO₂‐PDI possessed more surface defects (Ce³⁺) and active oxygen species than that of γ‐Fe₂O₃/CeO₂, resulting in the outstanding catalytic performance. And the composite catalyst also showed highly sensitive and selectivity toward VC with a limit of detection of 0.45 μM. Based on the fluorescent results, a possible hydroxyl radical (?OH) catalytic mechanism was proposed. It is believed that the as‐prepared γ‐Fe₂O₃/CeO₂‐PDI nanoparticles are promising biosensors applied for biomedical and food analysis.     

Location of the Spinel Vacancies in γ‐Al2O3

A non‐spinel model for the structure of γ‐Al₂O₃, with 25 % of the Al³⁺ cations at tetrahedral positions, has been the subject of wide interest. However, ¹⁷O NMR measurements and, more recently, ²⁷Al NMR measurements have shown that there are considerably more Al³⁺ cations at tetrahedral positions. This means that the Al³⁺ vacancies in γ‐Al₂O₃ are not at tetrahedral but at octahedral positions, as in isostructural γ‐Fe₂O₃ and in accordance with density functional theory predictions. This has consequences with regard to the surface structure of γ‐Al₂O₃, and thus, for catalysis.     

Poly (3,4‐ethylenedioxythiophene) γ‐Fe2O3 polymer composite–super paramagnetic behavior and variable range hopping 1D conduction mechanism–synthesis and characterization

The present paper reports the preparation of poly (3,4‐ethylenedioxythiophene) (PEDOT) ferrimagnetic conducting polymer composite by incorporation of ferrite particles in the polymer matrix by emulsion polymerization. Synthesis of PEDOT–γ‐Fe₂O₃ composite was carried out by chemical oxidative polymerization of EDOT with ferrite particles in the presence of dodecylbenzenesulfonic acid (DBSA) that works as dopant as well as surfactant in aqueous medium. The resulting conducting composite possesses saturation magnetization (Ms) value of 20.56 emu/g with a conductivity of 0.4 Scm^?1, which was determined by VSM and four probe technique, respectively. B‐H curve reveals that ferrimagnetic particles of γ‐Fe₂O₃ show super‐paramagnetic behavior at room temperature which was also observed in PEDOT–γ‐Fe₂O₃ composite. The resulting conducting ferrimagnetic composite shows microwave absorption loss of 18.7–22.8 dB in the frequency range of 12.4–18 GHz. Thermogravimetric analysis of the composite revealed that the composite is thermally stable up to 230°C. The characterization of the PEDOT–γ‐Fe₂O₃ composite was carried out using XRD and FTIR spectroscopy. Copyright © 2007 John Wiley & Sons, Ltd.     

Applications of iron and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 as a nanomagnetic catalyst for the chemoselective oxidation of sulfides to sulfoxides under solvent‐free conditions

In the present study, Fe²⁺ and Ni²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ (γ‐Fe₂O₃@HAp‐Fe²⁺ and γ‐Fe₂O₃@HAp‐Ni²⁺) with a high surface area has been synthesized and characterized by Fourier transform infrared (FTIR), X‐ray diffraction (XRD), vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), and scanning electron microscope (SEM) techniques. Then, γ‐Fe₂O₃@HAp‐Fe²⁺ and γ‐Fe₂O₃@HAp‐Ni²⁺ were used as a new and magnetically recoverable nano catalyst for the selective oxidation of sulfides to sulfoxides with 33% aqueous H₂O₂ (0.5 mL) as an oxidant at room temperature in good to excellent yields and short reaction time. Nontoxicity of reagent, mild reaction condition, inexpensive and high catalytic activity, simple experimental procedure, short period of conversion and excellent yields, and ease of recovery from the reaction mixture using an external magnet are the advantages of the present method.     

Magnetic poly(glycidyl methacrylate) particles prepared in the presence of surface‐modified γ‐Fe2O3

Maghemite (γ‐Fe₂O₃) colloid has been synthesized by coprecipitation of ferrous and ferric salts in alkaline medium and oxidation. The obtained nanoparticles were complexed with a phosphate macromonomer—penta(propylene glycol) methacrylate phosphate (PPGMAP). Complexes with the weight ratio PPGMAP/γ‐Fe₂O₃ 0.01–10 were investigated using a range of characterization methods. The amount of PPGMAP attached to the particles was about 22 wt %. The size and size distribution of the γ‐Fe₂O₃ core particles in the dry state was measured by TEM. To complete the TEM images, the hydrodynamic size of the nanoparticles including polymer shell and the maghemite core was determined by DLS measurements in toluene. Magnetic poly(glycidyl methacrylate) (PGMA) nanospheres were obtained by Kraton G 1650‐stabilized and 2,2′‐azobisisobutyronitrile‐initiated polymerization of glycidyl methacrylate (GMA) in toluene or toluene/cyclohexane mixture in the presence of PPGMAP‐coated γ‐Fe₂O₃ colloid. The effect of Kraton G 1650 concentration on the morphology, PGMA nanosphere size and polydispersity was investigated. The particles were characterized also by both thermogravimetric analysis and magnetic measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4982–4994, 2009     

Optical and Magnetic Properties of Conjugate Structures of PbSe Quantum Dots and γ‐Fe2O3 Nanoparticles

An investigation of the optical and magnetic properties of a unique hydrogen‐linked conjugate nanostructure, comprised of superparamagnetic γ‐Fe₂O₃ nanoparticles (NPs) and near‐infrared PbSe nanocrystal quantum dot (NQD) chromophores, is reported. The results show retention of the NQDs’ emission quantum efficiency and radiative lifetime, and only a small red shift of its band energy, upon conjugation to the dielectric surroundings of γ‐Fe₂O₃ NPs. The study also shows the sustainability of the superparamagnetism of the NPs after conjugation, with only a slight decrease of the ferromagnetic–superparamagnetic transition temperature with respect to that of the individual NPs. Thus, the conjugate nanostructure can be considered as a useful medical platform when PbSe NQDs act as fluorescent tags, while the γ‐Fe₂O₃ NPs are used as a vehicle driven by an external magnetic field for targeted delivery of tags or drugs.     

Metal Ions Induce Growth and Magnetism Alternation of α‐Fe2O3 Crystals Bound by High‐Index Facets

In this study, quasi‐cubic and hexagonal bipyramid α‐Fe₂O₃ polyhedrons with high‐index facets exposed were controllably synthesized by applying metal ions Zn²⁺ or Cu²⁺ as structure‐directing agents. The growth of the α‐Fe₂O₃ nanostructures with high‐index facets were induced by metal ions without the addition of any other surfactants. The quasi‐cubic form controlled by Zn²⁺ looks like a cube but has an angle of approximately 86° bound by (012), (10‐2), and (1‐12) facets, whereas the hexagonal bipyramid form controlled by Cu²⁺ has a sixfold axis bound by {012} facets. Magnetic measurements confirm that these two kinds of nanocrystals display shape‐ and surface‐dependent magnetic behaviors. The hexagonal bipyramid iron oxide nanocrystals show a lower Morin transition temperature of 240 K and might be spin‐canted ferromagnetically controlled at room temperature, and the ferromagnetism disappears at low temperature. The quasi‐cubic nanocrystals have a splitting between FC curve and ZFC curve from the highest experimental temperature and no Morin transformation occurs; this indicates that they would be defect ferromagnetically controlled at low temperature. The reported metal‐ion‐directing technique could provide a universal method for shape‐ and surface‐controlled synthesis of nanocrystals with high‐index facets exposed.     

Zur Kenntnis einer modifizierten Form des β-CuNdW2O8-Typs: γ-CuTbW2O8

On a Modified Form of the β-CuNdW₂O₈ Type: γ-CuTbW₂O₈ Single crystals of γ-CuTbW₂O₈ were prepared by flux in closed copper tubes. X-ray investigations show triclinic symmetry, space group C-P1 , with a = 6.722, b = 9.831, c = 15.352 Å, α = 72.82, β = 88.53, γ = 71.76°, Z = 6. γ-CuTbW₂O₈ is closely related to β-CuNdW₂O₈. One significant difference can be seen in an alternate staggered location of Tb³⁺ ions along [110].