Reactivity of UH3 with mild oxidants

Addition of 2 equiv of I2 to a stirring suspension of UH3 in Et2O results in vigorous gas evolution and the formation of UI4(OEt2)2 (1), which can be isolated in good yields as an air- and moisture-sensitive brick-red powder. Addition of 3 equiv of AgBr to UH3 in DME produces UBr3(DME)2 (2), while addition of 4 equiv of AgX to UH3 in DME-CH2Cl2 provides UX4(DME)2 (X = Br, 3; Cl, 4). Similarly, the reaction of 4 equiv of AgOTf with UH3 in neat DME generates U(OTf)4(DME)2 (5). Each of these reactions proceeds with the evolution of hydrogen. Complex can also be generated by reaction of 4 equiv of Me3SiI with UCl4 in Et2O. All complexes were fully characterized, including analysis by X-ray crystallography.     

New ligand systems incorporating two and three 4,4'-bipyridine units. Characterization of bi- and trimetallic rhodium and iridium complexes

The synthesis of new ligand systems based on the bipyridine unit for bi- and trimetallic complexes, including a rare example of a chiral bimetallic complex, is presented. Ligands BBPX (bis-bipyridine-xylene, 3) and TBPBX (tris-bipyridine-bis-xylene, 4) were prepared in one step by reacting alpha,alpha'-dibromo-o-xylene (2) with 2 equiv of the monolithiated derivative of 4,4'-dimethyl-2,2'-bipyridine. Dilithium (S)-binaphtholate (5) reacted with 2 equiv of 4-bromomethyl-4'-methyl-2,2'-bipyridine (6), affording ligand (S)-BBPBINAP (bis-bipyridine-binaphtholate, 7). These ligands reacted cleanly with 1, 1.5, and 1 equiv of the rhodium dimer [Rh(2)Cl(2)(HD)(2)] (HD = 1,5-hexadiene), respectively. Chloride abstraction led to the isolation of the cationic complexes BBPX[Rh(HD)BF(4)](2) (8), TBPBX[Rh(HD)BF(4)](3) (10), and (S)-BBPBINAP[Rh(HD)BF(4)](2) (12). When BBPX (3), TBPBX (4), and (S)-BBPBINAP (7) were added to 2, 3, and 2 equiv of [Rh(NBD)(2)]BF(4) or [Rh(NBD)(CH(3)CN)(2)]BF(4) (NBD = norbornadiene), respectively, clean formation of BBPX[Rh(NBD)BF(4)](2) (9), TBPBX[Rh(NBD)BF(4)](3) (11), and (S)-BBPBINAP[Rh(NBD)BF(4)](2) (13) was observed. The neutral iridium complex (S)-BBPBINAP[IrCl(COD)](2) (14) was obtained by reaction of (S)-BBPBINAP (7) with 1 equiv of [Ir(2)Cl(2)(COD)(2)] (COD = cyclooctadiene). The complexes were fully characterized including X-ray structural studies of 8, 9, and 13, and preliminary studies on their catalytic activity were performed.     

An unexpected possible role of base in asymmetric catalytic hydrogenations of ketones. Synthesis and characterization of several key catalytic intermediates

The dihydrogen compound trans-[Ru((R)-BINAP)(H)(eta2-H2)((R,R)-dpen)]+ (2', BINAP = 2,2'-bis(diphenylphosphino)-1,1'-binaphthyl, dpen = 1,2-diphenylethylenediamine) is a proposed intermediate in asymmetric ketone hydrogenations. It quickly reacts at -80 degrees C with 1 equiv of the base KOtBu in 2-PrOH-d8/CH2Cl2-d2 under H2 to generate trans-Ru((R)-BINAP)(H)(2-PrO)((R,R)-dpen) (4). The alkoxide 4 does not react with H2 after hours under ambient conditions. Addition of 1 equiv of KOtBu to 4 produces a hydrogen bonded species 10 that reacts readily with H2 at -80 degrees C to generate the dihydride catalytic intermediate trans-[Ru((R)-BINAP)(H)2((R,R)-dpen)] (3'). Addition of 1 equiv of ((CH3)3Si)2NK to the alkoxide 4 produces the amide catalytic intermediate 5. Compound 5 reacts reversibly with H2 to generate 3'.     

Terphenyl cyclooctatetraenyl compounds of samarium

The syntheses and molecular structures of a number of terphenyl-based compounds of the lanthanide element samarium are reported. Reaction of 2 equiv of DppLi (Dpp = 2,6-diphenylphenyl) with 1 equiv of SmCl(3) in tetrahydrofuran at room temperature yields (Dpp)(2)SmCl(micro-Cl)Li(THF)(3) (1). The one-pot reaction of 1 equiv of K(2)COT (COT(2)(-) = cyclooctatetraenyl dianion) with 1 equiv SmCl(3) in tetrahydrofuran at room temperature followed by addition of 1 equiv of terphenyllithium salt DppLi, DmpLi (Dmp = 2,6-dimesitylphenyl), or DanipLi (Danip = 2,6-di(o-anisol)phenyl) produces DppSmCOT(micro-Cl)Li(THF)(3) (2), DmpSm(THF)COT (3), and DanipSm(THF)COT (4), respectively. In the case of the Danip-based compound 4 the order of addition of reagents can be reversed producing the same compound, however, in considerably lower yield. Compound 2 can also be prepared by reaction of 1 with 1 equiv of K(2)COT in tetrahydrofuran. The molecular structure of the bis(terphenyl) compound 1 exhibits a formally four-coordinate metal atom. The molecular structures of the terphenyl COT compounds 2-4 feature monomeric complexes which are obtained either as a lithium chloride adduct (2) or as tetrahydrofuran adducts (3, 4). In 4 the Danip ligand adopts the meso form.     

TiCl4-promoted cyclization reactions of aminoacetals and ethenetricarboxylates leading to nitrogen-containing heterocycles

Lewis acid-catalyzed cyclization of aminoacetals 2 and triethyl ethenetricarboxylate (1a) has been examined. The reaction of 3-aminopropionaldehyde diethyl acetal (2a) and 1a in the presence of 1 equiv of TiCl(4) at room temperature gave 4-ethoxypiperidine-2,3,3-tricarboxylate 3a in 92% yield with a 2,4-diastereomer ratio of 1:1. The reaction in the presence of 3 equiv of TiCl(4) gave 2,4-trans-piperidine derivative 3a in 86% yield predominantly. The reaction of aminoacetaldehyde diethyl/dimethyl acetals 2c,d and 1a with 3 equiv of TiCl(4) gave 2,4-trans-4-pyrrolidine-2,3,3-tricarboxylates 5a,b predominantly.     

Stereoselective synthesis of 2-alkenylaziridines and 2-alkenylazetidines by palladium-catalyzed intramolecular amination of alpha- and beta-amino allenes.

Whereas palladium-catalyzed reaction of N-arylsulfonyl-alpha-amino allenes with an aryl iodide (4 equiv) in the presence of potassium carbonate (4 equiv) in DMF at around 70 degrees C affords the corresponding 3-pyrroline derivatives, the reaction in refluxing 1,4-dioxane under otherwise identical conditions yields exclusively or most predominantly the corresponding 2-alkenylaziridines bearing an aryl group on the double bond. Similarly, N-arylsulfonyl-beta-amino allenes can be also cyclized into the corresponding alkenylazetidines bearing a 2,4-cis-configuration under palladium-catalyzed cyclization conditions in DMF.     

Metal-induced coordination inversion and carbon-nitrogen bond rearrangement. Structurally characterized phenyl isocyanate inserted into aluminum methyl compounds and O- and N-bound aluminum compounds

[C(4)H(3)N(CH(2)NMe(2))-2]AlMe(2) (1) is prepared in 88% yield by the reaction of substituted pyrrole [C(4)H(4)N(CH(2)NMe(2))-2] with 1 equiv of AlMe(3) in methylene chloride. Reaction of compound 1 with 1 equiv of phenyl isocyanate in toluene generates a seven-membered cycloaluminum compound [C(4)H(3)N[CH(2)NPh(CONMe(2))]-2] AlMe(2) (2). The phenyl isocyanate was inserted into the aluminum and dimethylamino nitrogen bond and induced an unusual rearrangement which results in C-N bond breaking and formation. A control experiment shows that the reaction of substituted pyrrole [C(4)H(4)N(CH(2)NMe(2))-2] with 1 equiv of phenyl isocyanate in diethyl ether yields a pyrrolyl attached urea derivative [C(4)H(3)N(CH(2)NMe(2))-2-[C(=O)NHPh]-1] (3). The demethanation reaction of AlMe(3) with 1 equiv of 3 in methylene chloride at 0 degrees C afforded O-bounded and N-bounded aluminum dimethyl compounds [C(4)H(3)N(CH(2)NMe(2))-2-[C(=O)NPh]-1]AlMe(2) (4a) and [C(4)H(3)N(CH(2)NMe(2))-2-[CO(=NPh)]-1]AlMe(2) (4b) in a total 78% yield after recrystallization. Both 4a and 4b are observed in (1)H NMR spectra; however, the relative ratio of 4a and 4b depends on the solvent used. Two equivalents of AlMe(3) was reacted with 3 in methylene chloride to yield a dinuclear aluminum compound AlMe(3)[C(4)H(3)N(CH(2)NMe(2))-2-[C(=O)NPh]-1] AlMe(2) (5). Reaction of 5 with another equivalent of ligand 3 results in the re-formation of compounds 4a and 4b.     

Structure and reactivity of mixed alkali metal alkoxide/aryloxide catalysts.

The average solution aggregation state of the ester interchange catalyst 1, obtained by mixing 1 equiv of NaOt-Bu and 3 equiv of NaOC(6)H(4)-4-t-Bu, was determined to be 4.0 by vapor pressure osmometry (VPO) in THF. Low-temperature (1)H NMR spectra of 1 indicated that the THF solution contained a mixture of tetrameric clusters. On the basis of symmetry arguments and the sensitivity of the different species to the alkoxide/aryloxide ratio, the compounds were determined to be mixed clusters with 0:4, 1:3, 2:2, and 3:1 mixtures of the NaOt-Bu and NaOC(6)H(4)-4-t-Bu components. On a per -Ot-Bu basis, each cluster has a similar absolute activity, though the aryloxide-rich catalysts are significantly longer-lived. Unlike 1, catalysts containing ortho-substituted aryloxides, 2, do not give a strictly statistical distribution of clusters, and the activities of these catalysts depend on steric and electronic factors, though the absolute rate differences are not large.     

New approaches to high-activity transition-metal catalysts for carbon-carbon bond forming reactions. Rhenium-containing phosphorus donor ligands for palladium-catalyzed Suzuki cross-couplings

The rhenium complexes (eta 5-C5H5)Re(NO)(PPh3)((CH2)nPR2:) (n/R = 0/Ph, 0/t-Bu, 0/Me, 1/Ph, 1/t-Bu), which contain electron-rich and sterically congested phosphido moieties, give active catalysts for the title reaction; typical conditions (toluene, 60-100 degrees C): aryl bromide (1.0 equiv.), PhB(OH)2 (1.5 equiv.), K3PO4 (2.0 equiv.), Pd(OAc)2 (1 mol%), and a Re(CH2)nPR2: species or a 1:2 [Re(CH2)nPR2H]+X-/t-BuOK mixture (4 mol% rhenium).     

Palladium-catalyzed sequential alkylation-alkenylation reactions. Application to the synthesis of 2-substituted-4-benzoxepines and 2,5-disubstituted-4-benzoxepines

The synthesis of 2-substituted-4-benzoxepines and 2,5-disubstituted-4-benzoxepines from aryl iodides and bromoenoates is described. This methodology is based on a palladium-catalyzed aromatic substitution followed by an intramolecular Heck sequence. Under the reaction conditions (Pd(OAc)(2) (10 mol %), tri-2-furylphosphine (20 mol %), norbornene (2 equiv), Cs(2)CO(3) (2 equiv), CH(3)CN, 85 degrees C), moderate to excellent yields of benzoxepines bearing numerous substituents (Me, F, Cl, etc.) are obtained.     

Synthesis of substituted benzoxacycles via a domino ortho-alkylation/Heck coupling sequence

The synthesis of a variety of alkylidene benzoxacycles via a domino palladium-catalyzed ortho-alkylation/intramolecular Heck reaction is described. Under the optimized conditions [Pd(OAc)2 (10 mol %), P(2-Furyl)3 (20 mol %), norbornene (4 equiv), Cs2CO3 (2 equiv), CH3CN, 80 degrees C], aryl iodides with oxygen-tethered Heck acceptors are coupled with alkyl bromides (5 equiv) to generate a variety of six- and seven-membered-ring benzoxacyclic products.     

Synthesis and magnetic behavior of the tetrahedral cage complex [(cyclen)4V4(CN)6]6+

Reaction of [(cyclen)V(CF(3)SO(3))(2)](CF(3)SO(3)) with 4 equiv. of Et(4)N(CN) in DMF generates the seven-coordinate complex [(cyclen)V(CN)(3)], while a reaction employing just 1.5 equiv. produces a tetrahedral cage complex, [(cyclen)(4)V(4)(CN)(6)](6+), in which antiferromagnetic coupling leads to an S= 0 ground state.     

Synthesis of a base-stabilized silanone-coordinated complex by oxygenation of a (silyl)(silylene)tungsten complex

Base-stabilized silanone complex Cp*(OC)(2)W(SiMe(3)){O═SiMes(2)(DMAP)} (2) was synthesized by the reaction of (silyl)(silylene)tungsten complex Cp*(OC)(2)W(SiMe(3))(═SiMes(2)) (1) with 1 equiv of pyridine-N-oxide (PNO) in the presence of 4-(dimethylamino)pyridine (DMAP). Further oxygenation of 2 with 3 equiv of PNO at 80 °C resulted in the formation of a W-O-Si-O-Si framework to give disiloxanoxy complex Cp*(O)(2)W{OSiMes(2)(OSiMe(3))} (3). Complex 3 was also obtained by the direct reaction of complex 1 with 4 equiv of PNO at 80 °C.     

Synthesis and crystal structure of unprecedented phosphine adducts of d(1)-aryl imido-vanadium(IV) complexes

The reaction of the imido precursor [V(NAr)Cl(2)](n)() (1) (Ar = 2,6-i-Pr(2)C(6)H(3)) with 3 equiv of PMe(2)Ph yields the monomeric complex [V(=NAr)Cl(2)(PMe(2)Ph)(2)] (2). Reacting 1 with 1.5 equiv of dmpe or 1 equiv of dppm affords the dimeric complexes [V(=NAr)Cl(2)(dmpe)](2)(mu-P,P'-dmpe) (3) and [V(=NAr)Cl(2)(dppm)](2) (4), respectively. Complexes 2-4 have been fully characterized by spectroscopic methods, magnetism studies, and X-ray crystallography.     

T3P®‐Mediated One‐Pot Synthesis of Bis(α‐aminophosphonates)

Two series of bis(α‐aminophosphonates) were synthesized by one‐pot three‐component reactions using 4‐phenylenediamine, an aldehyde (2 equiv) and a phosphite (2 equiv), or terephtalaldehyde, an amine (2 equiv), and a phosphite (2 equiv) together with propylphosphonic anhydride (T3P®) in both series as a coupling reagent. The bis(α‐aminophosphonates) were obtained in moderate to excellent yields. The condensations take place under mild conditions and the isolation of the products is simple.     

Aluminium complexes containing bidentate and symmetrical tridentate pincer type pyrrolyl ligands: synthesis, reactions and ring opening polymerization

A series of aluminium derivatives containing substituted bidentate and symmetrical tridentate pyrrolyl ligands, [C(4)H(3)NH(2-CH(2)NH(t)Bu)] and [C(4)H(2)NH(2,5-CH(2)NH(t)Bu)(2)], in toluene or diethyl ether were synthesized. Their reactivity and application for the ring opening polymerization of ε-caprolactone have been investigated. The reaction of AlMe(3) with one equiv. of [C(4)H(3)NH(2-CH(2)NH(t)Bu)] in toluene at room temperature affords [C(4)H(3)N(2-CH(2)NH(t)Bu)]AlMe(2) (1) in 70% yield by elimination of one equiv. of methane. Interestingly, while reacting AlMe(3) with one equiv. of [C(4)H(3)NH(2-CH(2)NH(t)Bu)] in toluene at 0 °C followed by refluxing at 100 °C, [{C(4)H(3)N(2-CH(2)N(t)Bu)}AlMe](2) (2) has been isolated via fractional recrystalliztion in 30% yield. Similarly, reacting AlMe(3) with two equiv. of C(4)H(3)NH(2-CH(2)NH(t)Bu) generates [C(4)H(3)N(2-CH(2)NH(t)Bu)](2)AlMe (3) in a moderate yield. Furthermore, complex 1 can be transformed to an aluminium alkoxide derivative, [C(4)H(3)N(2-CH(2)NH(t)Bu)][OC(6)H(2)(-2,6-(t)Bu(2)-4-Me)]AlMe (4) by reacting 1 with one equiv. of HOC(6)H(2)(-2,6-(t)Bu(2)-4-Me) in toluene via the elimination of one equiv. of methane. The reaction of AlR(3) with one equiv. of [C(4)H(2)NH(2,5-CH(2)NH(t)Bu)(2)] in toluene at room temperature affords [C(4)H(2)N(2,5-CH(2)NH(t)Bu)(2)]AlR(2) (5, R = Me; 6, R = Et) in moderate yield. Surprisingly, from the reaction of two equiv. of [C(4)H(2)NH(2,5-CH(2)NH(t)Bu)(2)] with LiAlH(4) in diethyl ether at 0 °C, a novel complex, [C(4)H(2)N(2-CH(2)N(t)Bu)(5-CH(2)NH(t)Bu)](2)AlLi (7) has been isolated after repeating re-crystallization. Furthermore, reacting one equiv. of C(4)H(2)NH(2,5-CH(2)NH(t)Bu)(2) with AlH(3)·NMe(3) in diethyl ether generates an aluminium dihydride complex, [C(4)H(2)N(2,5-CH(2)NH(t)Bu)(2)]AlH(2) (8), in high yield. Additionally, treating 8 with one equiv. of HOC(6)H(2)(-2,6-(t)Bu(2)-4-Me) in methylene chloride produces [C(4)H(2)N(2,5-CH(2)NH(t)Bu)(2)][OC(6)H(2)(-2,6-(t)Bu(2)-4-Me)]AlH (9) with the elimination of one equiv. of H(2). The aluminium alkoxide complex 4 shows moderate reactivity toward the ring opening polymerization of ε-caprolatone in toluene.     

Dicarboxylate-bridged (Mo2)n (n = 2, 3, 4) paddle-wheel complexes: potential intermediate building blocks for metal-organic frameworks

The treatment of the dimeric paddle-wheel (PW) compound [Mo(2)(NCCH(3))(10)][BF(4)](4)1 with oxalic acid (0.5 equiv.), 1,1-cyclobutanedicarboxylic acid (1 equiv.), 5-hydroxyisophthalic acid (1 equiv.) (m-bdc-OH) or 2,3,5,6-tetrafluoroterephthalic acid (0.5 or 1 equiv.) leads to the formation of macromolecular dicarboxylate-linked (Mo(2))(n) entities (n = 2, 3, 4). The structure of the compounds depends on the length and geometry of the organic linkers. In the case of oxalic acid, the dimeric compound [(CH(3)CN)(8)Mo(2)(OOC-COO)Mo(2)(NCCH(3))(8)][BF(4)](6)2 is formed selectively, whereas the use of 2,3,5,6-tetrafluoroterephthalic acid affords the square-shaped complex [(CH(3)CN)(6)Mo(2)(OOC-C(6)F(4)-COO)](4)[BF(4)](8)3. Bent linkers with a bridging angle of 109° and 120°, respectively, lead to the formation of the molecular loop [(CH(3)CN)(6)Mo(2)(OOC-C(4)H(6)-COO)](2)[BF(4)](4)4 and the bowl-shaped molecular triangle [(CH(3)CN)(6)Mo(2)(m-bdc-OH)](3)[BF(4)](6)5. All complexes are characterised by X-ray single crystal diffraction, NMR ((1)H, (11)B, (13)C and (19)F) and UV-Vis spectroscopy.     

Hydrozirconation of stannylacetylenes. Synthesis and reactions of ketene Stannyl(Telluro) acetals

Stannylacetylenes 7a-e react with Cp(2)Zr(H)Cl in THF at room temperature to give the alpha-zirconated vinylstannane intermediates 8a-e, which subsequently react with butyltellurenyl bromide (2.0 equiv) to give exclusively ketene stannyl(telluro) acetals 6a-e of E configuration. Similar reactions were performed using phenylselenenyl bromide (2.0 equiv) as the electrophile, but a mixture of products was formed including the expected ketene stannyl(seleno) acetals 12. Otherwise, the use of 1.4 equiv of Cp(2)Zr(H)Cl and 1.0 equiv of PhSeBr results in the exclusive formation of 12, in good yields. Treatment of ketene stannyl(telluro) acetals with iodine or NBS followed by reductive dehalogenation results in the formation of 1-iodo-1-telluroalkenes 4a-e and 1-bromo-1-telluroalkenes 5a-e, respectively, with total retention of the configuration.     

Precursors for MOCVD and ALD of rare earth oxides-complexes of the early lanthanides with a donor-functionalized alkoxide ligand

Complexes of the early lanthanides with the donor-functionalized alkoxide ligand mmp (Hmmp = HOCMe(2)CH(2)OMe, 1-methoxy-2-methylpropan-2-ol) are excellent precursors for Metal Organic Chemical Vapor Deposition (MOCVD) and Atomic Layer Deposition (ALD) of lanthanide oxides; however, their coordination chemistry, which is the subject of this paper, is rather complex. Precursors for MOCVD and ALD of lanthanide oxides are prepared by the reaction of [Ln{N(SiMe(3))(2)}(3)] with 3 equiv of the alcohol Hmmp in toluene in the presence of 1 equiv of tetraglyme and are indefinitely stable in solution. Reaction of [Ln{N(SiMe(3))(2)}(3)] with 3 equiv of Hmmp in the absence of stabilizing Lewis bases gives complex condensed products with empirical formula [{Ln(mmp)(3-n)}(2)O(n)]. These condensed products show poor volatility and are unsatisfactory precursors for MOCVD or ALD of oxides. The cluster complex [La(3)(mu(3),kappa(2)-mmp)(2)(mu(2),kappa(2)-mmp)(3)(mmp)(4)] has been prepared by careful reaction of [La{N(SiMe(3))(2)}(3)] with 4 equiv of Hmmp and has been characterized by single-crystal X-ray diffraction. Salt metathesis reactions using M(mmp) (M = Li or Na) are unreliable routes to [Ln(mmp)(3)]. Crystals of the heterometallic cluster complex [NaLa(3)(mu(3)-OH)(mu(3),kappa(2)-mmp)(2)(mu(2),kappa(2)-mmp)(4)(mmp)(3)] were isolated from the reaction of [La(NO(3))(3)(tetraglyme)] with 3 equiv of Na(mmp), and crystals of [Li(kappa(2)-Hmmp)Pr(mu(2),eta(2)-mmp)(4))LiCl] were isolated from the reaction of PrCl(3) with 3 equiv of Li(mmp); both of these complexes have been characterized by single-crystal X-ray diffraction.     

Stepwise oxidation of the stannole dianion

Tin oxidation of stannole dianion 1 with 1.3 equivalents of oxygen gave terstannole-1,3-dianion 3. The non-aromatic nature of 3 was confirmed by X-ray crystallographic analysis. Treatment of 1 with 1,2-dibromoethane (3 equiv) gave poly(1,1-stannole) 4, the formation of which was proven by reduction of 4 with lithium to revert to the starting dianion 1. Reaction of 1 with 1,2-dibromoethane (3 equiv) in the presence of phenyllithium gave phenyl-capped ter(1,1-stannole) 7. The electronic absorption spectra of newly obtained stannoles were also measured.