Alkylation of ambident indole anion in ionic liquids

Alkylation of indole salts in different ionic liquids is reported. Ionic liquids increase the alkylation reaction rate of ambident indole anion and reduce the effects of counter ions and/or additives, the alkylation reaction rates being independent of the presence of small amounts of protic solvents or water.      

Palladium-catalyzed amination of quinaldine-5-triflate

Palladium-catalyzed amination reactions of quinoline triflate and the effect of a Pd catalyst, its ligands, solvents, bases, and temperature were studied. This method facilitated an easier pathway for the preparation of aminoquinoline derivatives as potential precursors of new serotoninerg agents.      

Sub-millivolt amplitude potential oscillations observed in the noise of hydrogen evolution on Ag and Cu microelectrodes

A strange effect was observed while using the method of quasi-simultaneous determination of electrochemical voltage noise and impedance to obtain information on the kinetics of the hydrogen evolution reaction on Ag and Cu microelectrodes. Beyond a certain polarizing current density we found microvolt-amplitude potential oscillations on both electrodes with a frequency in the 5 Hz–5 kHz range. The oscillations were observed in every single experiment with Ag and Cu, while no oscillatory behavior was observed during the control experiments with the Pt microelectrode. The presence of the oscillations indicates that the mechanism of hydrogen evolution is more complex compared to the original assumption.      

Influence of surfactants on the fading of malachite green

The kinetics of the reaction between malachite green (MG) and sodium hydroxide (MG fading) was studied using a spectrophotometric method in the presence of two cationic surfactants, cetyl-benzyl-dimethyl-ammonium chloride (CBDAC) and hexadecyl-trimethylammonium bromide (HTAB) and one anionic surfactant, sodium dodecyl sulphate (SDS) at concentrations below and above critical micellar concentrations. The cationic surfactants have a catalytic effect, while the anionic surfactant has an inhibitory effect on the reaction. A kinetic model describing the influence of surfactant on reaction rate was developed. The results are discussed on the basis of electrostatic and hydrophobic interactions between the kinetic micelles and malachite green.      

Synthesis, characterization and spectroscopic properties of some new phenylazo-6-aminouracil

In this study, a series of new 5-phenylazo-6-aminouracil dyes were prepared by linking m-,p-nitroaniline, m-,p-chloroaniline, m-,p-anisidine, m-,p-toluidine, m-,p-cyanoaniline, p-ethoxyaniline, p-phenoxyaniline, p-ethylaniline, p-acetamidoaniline, p-acetylaniline, p-carboxyaniline and aniline to 6-aminouracil. The prepared dyes were characterized by UV-vis, FT-IR, ¹H NMR spectroscopic techniques and elemental analysis. The effect of acid and base upon the UV-vis spectra of these dyes were investigated. In addition, the solvatochromic behaviors and substituent effects in various solvents were evaluated.      

Low temperature synthesis and characterization of Mn3O4 nanoparticles

Heating hydrous manganese (II) hydroxide gel at 85 °C for 12 hours produces Mn₃O₄ nanoparticles. They were characterized by X-ray powder diffraction (XRD) and infrared spectroscopy (FTIR). The particle size estimated from the SEM and X-ray peak broadening is approximately 32 nm, showing them to be nanocrystalline. EPR measurements confirm a typical Mn²⁺signal with a highly resolved hyperfine structure.      

DFT and neutron diffraction study of 1,6-anhydro-β-D-glucopyranose (levoglucosan)

Geometries of 27 generated conformers of levoglucosan were optimized in vacuo at DFT level of theory combining several functionals with high quality basis sets. For the sake of comparison a reference molecular and crystal geometry obtained from 30 K single crystal neutron diffraction data was used. Analysis of the conformers’ geometries revealed that in all stable conformers intramolecular two-or three centre hydrogen bonds were formed. Relative energy of the conformer, which approximated the molecule in the crystal structure the most, was only ∼3 kcal/mol higher, than the energy of the most stable conformer in vacuo. The largest discrepancies between the geometries calculated in vacuo and experimental geometry concentrated in the vicinity of anomeric C1. These differences were reduced by involving O1 to intermolecular hydrogen bond using a simple model of the respective hydrogen bond in the crystal.      

Aminophosphine complex as a catalyst precursor in Suzuki coupling reactions

A palladium complex with an aminophosphine ligand has been prepared and investigated as a catalyst precursor in Suzuki coupling reactions in toluene. Nanoparticles composed of elemental palladium have been isolated from the reaction media and analyzed using transmission electroscopic microscope (TEM), which shows the essential catalysts palladium nanoparticles to have a size of ca. 3.0 nm. dedicate to the 60th birthday of Prof. Dr. Yuan Kou     

Pyrrole thin films deposited on paper by pulsed RF plasma

Attempts were made to plasma deposit an oriented π-conjugated polymer of pyrrole (Py) on paper surfaces in order to produce electrically conductive layers. The N/C atomic ratio of 0.13–0.24 was observed for all treatment conditions. This implies the nature of the deposition formed on the paper surface via pulsed plasma is different from that of pyrrole monomer. An increase in conductivity of all pyrrole-plasma treated papers was observed. The 50 W RF-power with 5 min plasma exposed paper sample shows 8.15 × 10⁻⁹ S·cm⁻¹ conductivity. The conductivity measurements indicated a plasma-enhanced ring-opening reaction mechanism of pyrrole.      

Electrospinning of the hydrophilic poly (2-hydroxyethyl methacrylate) and its copolymers with 2-ethoxyethyl methacrylate

The goal was to electrospin 2-hydroxyethyl methacrylate — based biocompatible polymers and prepare submicron fibres (nanofibers) for biomedicinal applications. Syntheses of poly(2-hydroxyethyl methacrylate) (HEMA) and its copolymer with 2-ethoxyethyl methacrylate (EOEMA), and their characterization by viscometry and molecular weight are described. Their relation to electrospinning is discussed. Electrospinning of HEMA homopolymer from water-ethanol is successful for molecular weights 6.31 × 10⁵ and 1.80 × 10⁶ g/mol. Electrospinning of HEMA/EOEMA copolymers is feasible from ethanol.      

Review of analytical methods for the determination of chlorine dioxide

The present study reviews more than twenty years (1985-present) of published research on the development and application of analytical procedures for the determination of chlorine dioxide, a widely used disinfectant and bleaching agent. The review covers a variety of techniques including batch and automated spectrophotometry and fluorimetry, electroanalysis and chromatography. The analytical figures of merit to the methods are presented, while critical discussion regarding their advantages and disadvantages is addressed.      

Indirect determination of lutetium by differential pulse anodic stripping voltammetry at a hanging mercury drop electrode

Lutetium has been determined by differential pulse anodic stripping voltammetry in an acidic solution containing Zn-EDTA. Lutetium (III) ions liberated zinc (II), which was preconcentrated on a hanging mercury drop electrode and stripped anodically, resulting in peak current linearly dependent on lutetium (III) concentration. Less than 0.4 ng mL⁻¹ lutetium could be detected after a 2 min deposition.      

Electron rectification through donor-acceptor-heterocyclics connected to cumulenic bridge: a computational study

Density Functional Theory (DFT) calculations and Frontier Molecular Orbital (FMO) analysis have been carried out at B3LYP/6-31G(d,p) level of theory on some Donor-Bridge-Acceptor (D-B-A) molecules for their electrical rectification behavior. The donor-acceptor-heterocyclics (D/A-heterocyclics) (namely thiophene, furan and pyrrole rings) are attached as donor and acceptors to the two ends of cumulenic bridge. FMO analysis indicates that the molecules having even number of double bonds in the bridge, possess a complete localization of the MOs i.e., the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) are localized on the donor and the acceptor side of the molecules respectively, and LUMO+1 is localized on the donor side, where as in case of odd number of double bonds in the bridge, both the HOMO and LUMOs are delocalized all over the molecule. The Potential Drop (PD) in the former case decreases as the number of double bonds increases in the bridge and due to the presence of the mutually orthogonal and noninteracting π-clouds, they can act as molecular rectifiers. For the molecules with the odd number of double bonds due to the low-lying LUMO delocalized all over the molecule, may find application as molecular wires in molecular electronics circuits.      

Ionic liquid promoted synthesis of bis(indolyl) methanes

1-benzyl-3-methyl imidazolium hydrogen sulphate [bnmim][HSO₄] was found to be an effective catalyst for the condensation reaction of indoles and derivatives with benzaldehydes in microwave irradiation with lower reaction time and higher yields to give bis(indolyl) methanes.      

One step synthesis of Diflunisal using a Pd-diamine complex

Diflunisal and Felbinac, two FDA-approved NSAIDs and other biphenyl carboxylic acids were prepared in one step by a simple and clean Suzuki cross-coupling reaction using an easily synthesized, air and moisture stable, palladium-diamine complex. The yield (93%) for the one-step preparation of Diflunisal is the best reported without using a glovebox and a phoshine-based catalyst.      

ZrOCl<Subscript>2</Subscript> · 8H<Subscript>2</Subscript>O: An efficient catalyst for rapid one-pot synthesis of 3-carboxycoumarins under ultrasound irradiation in water

In this report, a rapid, efficient and environmental friendly synthesis of 3-carboxycoumarins under ultrasound irradiation in water media is described. The Knoevenagel condensation of Meldrum’s acid with substituted benzaldehydes in the presence of zirconium oxide chloride (ZrOCl₂·8H₂O) and ultrasonic irradiation in water gave the corresponding 3-carboxycoumarins in good to excellent yields.      

The binary system PbO - BiVO4

Phase equilibria established in the PbO - BiVO₄ system over the whole component concentration range up to 1000°C have been investigated. A phase diagram has been constructed using DTA and XRD.      

Proposal for a mercury isolation procedure using cold vapor method in combination with voltammetric determination using a rotating gold electrode

The optimal process of pre-treatment and activation of gold rotating disc electrode (AuRDE) before voltammetric determination of mercury is proposed. This treatment encompasses polishing of the electrode surface, electrochemical cycling, and activation. This procedure both increases determination sensitivity as well as improves determination reproducibility. The detection limit on the working electrode achieved using this approach amounted to 8.26·10⁻¹⁰ mol L⁻¹for direct mercury determination in water solution (applying 200 s running accumulation). The procedure of the quantitative mercury isolation from complicated sample matrix was developed as well. It provides better selectivity and significant increase of sensitivity of mercury determination. In case of mercury isolation from one liter of water the detection limit is 6.23·10⁻¹¹ mol L⁻¹ (analyzing a greater sample volume the determined concentration could be lower).      

Ionic liquid-functionalized SBA-15 mesoporous material: efficient heterogeneous catalyst in versatile organic reactions

Ionic liquid-functionalized mesoporous materials exhibited high catalytic activity in versatile organic reactions, such as cycloaddition of carbon dioxide (CO₂) with epoxide, aza-Michael addition of amines to α, β-unsaturated carbonyl compounds, and the Biginelli reaction of aldehyde, ethyl acetoacetate and urea. Recycling of the catalyst in these reactions could be carried out and the catalyst used at least five times without significant loss in activity.