New dicholesteryl-based gelators: chirality and spacer length effect

Eight new diacid amides of dicholesteryl L(D)-alaninates were designed and prepared. The compounds with spacers containing three, four, five, or six carbon atoms and L-alanine residues are denoted as 1a, 2a, 3a, and 4a, respectively, and those containing D-alanine residues are denoted as 1b, 2b, 3b, and 4b, respectively. A gelation test revealed that a subtle change in the length of the spacer and an inverse in the chirality of the amino acid residue can produce a dramatic change in the gelation behavior of the compounds and the microstructures of the gels, as revealed by SEM, XRD, and CD measurements. Importantly, for the compounds 1 and 2, those containing d-alanine residues (1b, 2b) are more efficient gelators than their analogues with opposite chirality (1a, 2a). For the compounds of longer spacers (3, 4), however, those containing l-alanine residues (3a, 4a) are superior to the corresponding ones with d-alanine residues (3b, 4b). Very interestingly, of the 139 gel systems studied, at least 11 of them gel spontaneously at room temperature. Studies of the rheological properties of the example systems of these gels demonstrated that change in the spacer lengths of the gelators has a great effect upon the mechanical properties of the corresponding gels, and the studies also revealed the thixotropic properties of the gels. Furthermore, it was observed that 4a forms water-in-oil gel emulsions with some organic solvents by simple agitating the systems at room temperature.     

Effects of polyethylene spacer length in polymeric electrolytes on gelation of ionic liquids and ionogel properties

Polymer electrolytes containing N,N′-(trans-cyclohexane-1,4-diyl)dibenzamide linkages, polyethylene ((CH₂)_m, m = 2, 4, 10) spacers, and bis(trifluoromethanesulfonyl)amide (TFSA) or bis(fluorosulfonyl)amide (FSA) counteranions (polymer abbreviation: CDBAm•X; m = 2, 4, 10; X = TFSA, FSA) have been synthesized, adding to our previous report (m = 6). In addition, their ability to effect the gelation of six ionic liquids and the properties of the resulting ionogels have been examined. The polymers, except for CDBA10•TFSA, effect the gelation for all ionic liquids used in this study at fairly low concentrations (0.9–50 g/L). Ionogel ionic conductivity is not dependent on the spacer length, but does decrease slightly as increasing amounts of the gelatinizer are introduced. In contrast to ionic conductivity, the temperatures at which these ionogels transition into isotropic fluids is dependent on the spacer length; the gel composed of [EMI][FSA] and 100 g/L of CDBA6•FSA transforms at 120 °C, while the gel composed of [EMI][FSA] and 5 g/L of CDBA2•FSA does not transform into a sol even when temperatures become 155 °C. In brief, ionogel heat resistance can be improved by changing the spacer length of the polyelectrolyte. Finally, it has been determined using cyclic voltammetry that the potential window of the polyelectrolytes is particularly wide, ranging from −1.6 to 2.5 V. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 249–255     

Self-assembly of carbazole-containing gelators: alignment of the chromophore in fibrous aggregates

Carbazole-containing gelators derived from l-isoleucine have been developed. They form elongated self-assembled fibers in common organic solvents and in liquid crystals, leading to the efficient gelation of these solvents. Spectroscopic studies indicate that the carbazolyl moieties are one-dimensionally stacked in the fibers. The stacking of the carbazolyl moieties is reversible by the association and dissociation of the hydrogen bonding. Moreover, anisotropically aligned fibers have been obtained in a homogeneously oriented smectic state of liquid crystals. This template behavior would serve as a versatile approach to the functionalization of self-assembled fibers.     

Low-molecular-weight gelators: elucidating the principles of gelation based on gelator solubility and a cooperative self-assembly model

This paper highlights the key role played by solubility in influencing gelation and demonstrates that many facets of the gelation process depend on this vital parameter. In particular, we relate thermal stability ( T gel) and minimum gelation concentration (MGC) values of small-molecule gelation in terms of the solubility and cooperative self-assembly of gelator building blocks. By employing a van't Hoff analysis of solubility data, determined from simple NMR measurements, we are able to generate T calc values that reflect the calculated temperature for complete solubilization of the networked gelator. The concentration dependence of T calc allows the previously difficult to rationalize "plateau-region" thermal stability values to be elucidated in terms of gelator molecular design. This is demonstrated for a family of four gelators with lysine units attached to each end of an aliphatic diamine, with different peripheral groups (Z or Boc) in different locations on the periphery of the molecule. By tuning the peripheral protecting groups of the gelators, the solubility of the system is modified, which in turn controls the saturation point of the system and hence controls the concentration at which network formation takes place. We report that the critical concentration ( C crit) of gelator incorporated into the solid-phase sample-spanning network within the gel is invariant of gelator structural design. However, because some systems have higher solubilities, they are less effective gelators and require the application of higher total concentrations to achieve gelation, hence shedding light on the role of the MGC parameter in gelation. Furthermore, gelator structural design also modulates the level of cooperative self-assembly through solubility effects, as determined by applying a cooperative binding model to NMR data. Finally, the effect of gelator chemical design on the spatial organization of the networked gelator was probed by small-angle neutron and X-ray scattering (SANS/SAXS) on the native gel, and a tentative self-assembly model was proposed.     

Self-assembly of gelators confined within the nano-scale interlayer space of organo-montmorillonite

The self-assembly of low molecular weight gelators confined within the nano-scale interlayer space of organo-montmorillonite is likely to be different from that under normal conditions (bulk space). Four kinds of gelators, 1-methyl-2,4-bis(N'-n-octadecylureido) benzene (MBB18), 1-methyl-2,4-bis(N'-n-dodecylureido)benzene (MBB12), bis(4'-stearamido phenyl) methane (BSM18) and bis(4'-octanamido phenyl)methane (BOM8), were used to investigate gelation of organic solvents confined within the nano-scale interlayer space of organo-montmorillonite. The possible morphologies of these gelators aggregates confined within the nano-scale space of organo-montmorillonite will be discussed in comparison with that in bulk space by employing differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Herein, two types of organogels were prepared under the same conditions. One of them was formed within the interlayer space of organo-montmorillonite and another was formed in bulk space. The XRD patterns confirm that self-assembly of gelators takes place via an unusual pathway within the confined interlayer space of organo-montmorillonite, indicating that the alkyl chains of gelators adopt a parallel arrangement and do not insert into each other. This unusual arrangement of gelators confined within the interlayer space of organo-montmorillonite does lead to the different thermal effect observed by the DSC measurements. These features ultimately strengthen the thermodynamic stability of gelator aggregates, for example MBB18, and raise the gel-to-sol transition temperature, which jumps from 60 to 123 degrees C.     

Synthesis and properties of amphiphilic photoresponsive gelators for aromatic solvents

A sugar-based photoresponsive supergelator, N-glycosylazobenzene that shows selective gelation of aromatic solvents is described. The partial trans-cis isomerization of the azobenzene moiety allows photoinduced chopping of the entangled gel fibers to short fibers, resulting in controlled fiber length and gel-sol transition. The gelator is useful for the selective removal of toxic aromatic solvents from water.     

Low molecular mass cationic gelators derived from deoxycholic acid: remarkable gelation of aqueous solvents

During the past decade, the study of molecular self-assembly and network formation from small molecule gelators has become one of the most active areas of supramolecular chemistry. A serendipitous discovery of the gelation of a cationic bile salt (4) led us to investigate the aggregation properties of this new class of cationic hydrogelators. This article summarizes the recent efforts on the study of side chain structure-aggregation property relationship of cationic bile salts. Bile acid analogs with a quaternary ammonium group on the side chain were found to efficiently gel aqueous salt solutions. Some of the cationic bile salts gelled water alone and many of them gelled aqueous salt solutions even in the presence of organic co-solvents (≤20%) such as ethanol, methanol, DMSO, and DMF. These gels showed interconnected fibrous networks. Unlike natural anionic bile salt gels (reported for NaDC and NaLC), the cationic gels reported here are pH independent. Cationic gels derived from DCA showed more solid-like rheological response compared to natural NaDC gels studied earlier by Tato et al.     

The effect of spacer length on the polymerization of diacetylenes in sams on gold surfaces

The influence of the molecular architecture of diacetylene disulfides on the structure and polymerizability of self assembled monolayers on gold was investigated. The position of the diacetylene group was varied systematically by adjusting the length of the tail and the spacer. For the structures studied, the longer the tail, the higher the akyl chain crystallinity as sensed by IR spectroscopy, and the higher the polymerization efficiency as probed by resonance Raman spectroscopy. The influence of the spacer on the polymerizability is more complicated. It is conjectured that the spacer reduces the lattice strain due to the misfit of the arrangement of the anchor groups and the arrangement of the diacetylene units and the polydiacetylene backbone, respectively. Simple modeling reveals that the number of the methylene units (odd or even) and the overall length both influence the arrangement. The highest polymerization efficiency is found for the longest, odd numbered spacer.     

Self-assembly and gelation of oxidized glutathione in organic solvents.

The oxidized disulfide form of the ubiquitous tripeptide glutathione (gamma-glu-cys-gly) (GSSG) is shown to produce transparent, thermoreversible gels in aqueous solutions of dimethyl sulfoxide, dimethylformamide, and methanol, at GSSG concentrations as low as 1.5 mM. The gels bind Congo Red and exhibit dramatic green birefringence when observed between crossed polarizers, characteristic of amyloid structures. By transmission electron microscopy, the gels appear to consist of a network of fibrous structures about 75 nm in diameter. Several structurally related peptides, including the glutathione isomer glu-cys-gly and the aspartyl analogue of glutathione (beta-asp-cys-gly), failed to produce gels under similar conditions. These results suggest that the interactions which produce gelation are highly specific and that the unusual peptide geometry introduced by gamma-glu-cys linkage is critical to the gelation behavior. (1)H NMR indicates solvent-dependent perturbation of the gamma-glutamyl alpha- and beta-protons and circular dichroism reveals a shift in the geometry of the disulfide bond under conditions producing gelation. We propose that in appropriate organic solvents, GSSG self-assembles into an extended network of beta-sheetlike structures capable of immobilizing bulk solvent. While obviously speculative, it is interesting to consider possible physiological consequences of glutathione self-recognition in such processes as abnormal protein aggregation and the thiol-disulfide exchange which is believed to participate in protein folding.     

Self-assembly and gelation behavior of tris(phenylisoxazolyl)benzenes

Low-molecular-mass organic gelators (LMOG), tris(phenylisoxazolyl)benzenes, were synthesized, and their self-assembling behavior was examined using (1)H NMR and UV-vis absorption spectroscopies. They turned into a gel in both nonpolar and highly polar solvents such as methylcyclohexane, ether, acetone, dimethylsulfoxide, etc. Field emission scanning electron microscopy (FESEM) observation of the xerogels of 1 and 3 possessing the saturated alkyl chains revealed that well-developed straight fibers were formed, whereas the unsaturated termini of the alkyl chains of 2 promoted the formation of both the right- and left-handed helical fibers. The self-association behavior of 1, 2, and 5 in solution were investigated using (1)H NMR and UV-vis spectroscopies. The flat aromatic compound 1 stacked in a columnar fashion along its C(3) axis via π-π stacking interactions. The assemblies were regulated by the peripheral alkyl substituents; the saturated alkyl groups facilitated the assemblies while terminal double bonds impeded the intermolecular association, and the branched substituents obviously interfered in the formation of the stacks, probably due to steric requirements. Theoretical calculations suggest that the three dipoles of the isoxazole groups adopt the circular array. The conformational search of the hexameric stacks of 4 using MacroModel V9.1 gave rise to two major conformers: one is nonhelical and the other is helical. Further detailed structural analysis of the assemblies of chiral 5 using circular dichroism (CD) measurements indicated that their assemblies adopt helical structures in solution. CD spectra and DFT calculations revealed that R-5 forms a left-handed supramolecular helicate. The coassembly of R- and S-5 displayed chiral amplification, since the chiral information from 5 was transferred to the supramolecular chirality of the helical assemblies of 1. A small amount of optically active 5 provided enough chiral stimulus to produce a remarkable chiral response and supramolecular helical structures of 1.     

Click procedure of phthalocyanine star-shaped mesogens – the effect of size and spacer length

ABSTRACT

A new Click procedure have been recently presented, in which a mixture of a female piece (star mesogen with shape-persistent conjugated arms and intrinsic free space) and a male building block (the same star mesogen sterically overcrowded with fullerenes attached via spacers to the arms) self-assemble in highly ordered filled liquid crystal structures. This self-assembly is based on the space-filling of the intrinsic free space and the nanosegregation of the fullerenes in helices. Here we highlight the synthesis of larger phthalocyanine star mesogens and fullerenes attached via long spacers and their mixtures as well as mixtures of the components with the stars of intermediate size and spacer length. While the system with long spacers do not show any alignment and π-stacking, the click procedure reappears successfully for the combination of a large female star and the intermediate male star.     

Geminal bis-ureas as gelators for organic solvents: gelation properties and structural studies in solution and in the gel state

Several geminal bis-urea compounds were synthesised by means of an acid-catalysed condensation of various benzaldehydes with different monoalkylureas. Many of these compounds form thermoreversible gels with a number of organic solvents at very low concentrations (<3mM) and which are stable to temperatures higher than 100 degrees C. Electron microscopy revealed a three-dimensional (3D) network of intertwined fibres, which are several tens of micrometers long and have a width ranging from approximately 30 to 300 nm. The possible aggregate forms and aggregate symmetries were evaluated by means of molecular mechanics calculations. 1H NMR, 2D NMR, 13C NMR and 13C-CP/MAS NMR techniques were used to obtain information about the aggregation and possible aggregate symmetry of geminal bis-ureas in solution, in the gel state, and in the solid state.     

Tetrachelate porphyrin chromophores for metal oxide semiconductor sensitization: effect of the spacer length and anchoring group position

Four Zn(II)-tetra(carboxyphenyl)porphyrins in solution and bound to metal oxide (TiO2, ZnO, and ZrO2) nanoparticle films were studied to determine the effect of the spacer length and anchoring group position (para or meta) on their binding geometry and photoelectrochemical and photophysical properties. The properties of three types of anchoring groups (COOH and COONHEt3) for four Zn(II)-porphyrins (Zn(II)-5,10,15,20-tetra(4-carboxyphenyl)porphyrin (p-ZnTCPP), Zn(II)-5,10,15,20-tetra(3-carboxyphenyl)porphyrin (m-ZnTCPP), Zn(II)-5,10,15,20-tetra(3-(4-carboxyphenyl)phenyl)porphyrin (m-ZnTCP2P), and Zn(II)-5,10,15,20-tetra(3-ethynyl(4-carboxyphenyl)phenyl)porphyrin (m-ZnTC(PEP)P)) were compared. In m-ZnTCPP, m-ZnTCP2P, and m-ZnTC(PEP)P the four anchoring groups are in the meta position on the meso-phenyl rings of the porphyrin macrocycle, thus favoring a planar binding mode to the metal oxide surfaces. The three meta-substituted porphyrin salts have rigid spacer units of increasing length (phenyl (P), biphenyl (P2), and diphenylethynyl (PEP)) between the porphyrin ring and the carboxy anchoring groups, thus raising the macrocycle from the metal oxide surface. All porphyrins studied here, when bound to TiO2 and ZnO, exhibited quenching of the fluorescence emission, consistent with electron injection into the conduction band of the semiconductor. Steady-state UV-vis and fluorescence studies of p-ZnTCPP on insulating ZrO2 showed evidence of aggregation and exciton coupling. This was not observed in any of the meta-substituted porphyrins. The photoelectrochemical properties (IPCE, Voc, and Isc) of the porphyrins bound to TiO2 films in solar cells have been measured and rationalized with respect to the sensitizer binding geometry and distance from the surface.     

A new family of "clicked" estradiol-based low-molecular-weight gelators having highly symmetry-dependent gelation ability

Reported herein is the discovery of a novel family of "clicked" estradiol-based LMWGs whose gelation ability highly depends on the gelator symmetry. These LMWGs that gel different organic solvents in the presence of H(2)O even at concentrations as low as 0.04 wt% are readily accessible using "click" chemistry.     

Mixtures of monomeric and dimeric surfactants: hydrophobic chain length and spacer group length effects on non ideality

Critical micelle concentrations of the Cm TAB+12- s-12 (s=3, 4, 5 and m=10, 12, 14, 16) binary systems have been determined, through conductivity and fluorescence measurements, at 298 K. Application of different theoretical approaches to explain mixed micellization shows that non-ideality of the binary systems follows the trend C16TAB+12-3-12相似文献   

Self-assembly of extended polycyclic aromatic hydrocarbons on Cu111

We present a low-temperature scanning tunneling microscopy study on the self-assembly of extended polycyclic aromatic hydrocarbons with different symmetries on the Cu111 surface. All molecules show a commensurate monolayer structure, with significant structural differences with respect to the unit cell of the molecular lattice and the orientational ordering. We find that the molecular lattice and the molecular orientation are largely dominated by molecule-substrate interactions, whereas molecule-molecule interactions determine the molecular packing density via steric repulsion. Moreover, we show that the structure of the monolayer is transferred to the second layer via molecule-molecule interaction.     

Organogels with complexes of ions and phosphorus-containing amphiphiles as gelators. Spontaneous gelation by in situ complexation

The properties of thermally reversible organogels that are formed spontaneously upon mixing a phosphonic acid monoester, monophosphonic acid, or bisphosphonate ester, each containing a long alkyl chain substituent, with one of several compounds of aluminum(III) and boron(III) in an organic liquid were studied by IR, NMR, optical microscopy, X-ray diffraction, and rheological techniques. Attempts to form gels with zirconium(IV) were unsuccessful. Gelation occurred at room temperature upon complexation, leading to the formation of entangled networks of elongated objects similar to giant, worm-like micelles. On the basis of the diversity of the liquids gelated, the minimum concentration of gelator required to make a gel at room temperature (typically <5 wt %), and the temporal and thermal stabilities of the gels, Al complexes of phosphonic acid monoesters were found to be better gelators than bisphosphonate complexes. Several of the gels formed from the monophosphonate-Al complexes were stable for very long periods when they were kept in sealed tubes at room temperature. When heated, they reverted to sols over wide temperature ranges. The nature of the gels and the complexes from which they were formed were correlated, especially for those with the phosphonic acid monoester. The results describe an interesting class of two-component gelators that can be made from freely flowing solutions by mixing the components at room temperature, without the need for a catalyst, radiation, or sonication. The properties of the gels can be modulated by careful choice of the structural variables in the phosphorus-containing latent gelators.