Effect of processing parameters on structural and optical properties of CeO2 nanoparticles for the removal of crystal violet dye

Journal of Sol-Gel Science and Technology - The present work reports the synthesis of CeO2 nanoparticles (NPs) via chemical route by optimizing synthesis parameters such as solvent, capping agent,...     

Synthesis and properties of CeO2-SnO2 films

The formation of CeO₂-SnO₂ thin films from film-forming solutions (FFSs) using the sol-gel method is studied. The effects of SnO₂ content on the thickness and refractive index of films are shown.     

Remarkable changes in the optical properties of CeO(2) nanocrystals induced by lanthanide ions doping

Highly uniform and well-dispersed CeO(2) and CeO(2):Eu(3+) (Sm(3+), Tb(3+)) nanocrystals were prepared by a nonhydrolytic solution route and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), UV/vis absorption, and photoluminescence (PL) spectra, respectively. The result of XRD indicates that the CeO(2) nanocrystals are well crystallized with a cubic structure. The TEM images illustrate that the average size of CeO(2) nanocrystals is about 3.5 nm in diameter. The absorption spectrum of CeO(2):Eu(3+) nanocrystals exhibits red-shifting with respect to that of the undoped CeO(2) nanocrystals. Under the excitation of 440 nm (or 426 nm) light, the colloidal solution of the undoped CeO(2) nanocrystals shows a very weak emission band with a maximum at 501 nm, which is remarkably enhanced by doping additional lanthanide ions (Eu(3+), Tb(3+), Sm(3+)) in the CeO(2) nanocrystals. The emission band is not due to the characteristic emission of the lanthanide ions but might arise from the oxygen vacancy which is introduced in the fluorite lattice of the CeO(2)nanocrystals to compensate the effective negative charge associated with the trivalent ions.     

Nonlinear optical and structural properties of langmuir-blodgett films of thiohelicenebisquinones

We provide a detailed investigation of the second-order nonlinear optical and structural properties of Langmuir-Blodgett (LB) films of nonracemic thiohelicenebisquinone (THBQ). We prepare both X- and Y-type films of different thicknesses and characterize them using optical second-harmonic generation and atomic-force microscopy (AFM). We find that the overall nonlinear properties of the samples are essentially independent of the film thickness and the deposition type and arise from susceptibility tensor components associated with chirality. Both X- and Y-type films can be described by D2 symmetry, which is a higher symmetry than the previously assumed C2 of LB films of THBQ and a similar helicenebisquinone (HBQ). However, the two types of films are shown to differ significantly with respect to the orientation of the in-plane axis. For Y type, the axis follows the direction of vertical sample deposition, but for X type, the direction of the axis varies randomly and significantly between different samples. The Y-type samples are therefore more ordered than the X-type samples. This was confirmed by AFM measurements in which the Y type exhibits uniform ordering into columnar structures. Similar structures in X type, on the other hand, are shorter and more randomly oriented, like those earlier observed for racemic samples of HBQ [Verbiest, T., et al. Science 1998, 282, 913]. The common nonlinear properties and different high-level ordering observed here for two different types of nonracemic samples reinforces that the nonlinearity of THBQ (and probably HBQ, as well) originates from the low-level columnar aggregation of the molecules with the higher-level structures playing a lesser role. In addition, within the columns, the molecules likely assume fairly random azimuthal orientations so that the columns themselves exhibit approximate Dinfinity symmetry.     

Effect of preparation procedure on the properties of CeO2

The effect of preparation procedure on the physicochemical and catalytic properties of CeO₂ was studied. Differences in the electronic and structural characteristics of CeO₂ depending on preparation procedure and treatment temperature were found using X-ray diffraction analysis, transmission electron microscopy, UV-visible electronic spectroscopy, and X-ray photoelectron spectroscopy. With the use of the temperature-programmed reaction with CO, it was demonstrated that CeO₂ samples with a high concentration of point defects—oxygen vacancies caused by the presence of Ce³⁺—were characterized by an increased mobility of bulk oxygen. The samples of CeO₂ with a high concentration of structural defects—micropores of size 1–2 nm and stepwise vicinal faces in crystallites—exhibited a high catalytic activity in the reaction of CO oxidation.     

Effect of the cadmium ion source on the structural and optical properties of chemical bath deposited CdS thin films

The chemical bath deposition (CBD) technique has been successfully used to deposit cadmium sulphide from cadmium chloride and cadmium acetate as the cadmium ion source and thiourea as the sulphur source on both glass microscope slide and indium tin oxide coated glass substrates. Various properties of the films such as surface morphology, crystallinity, optical properties and resistivitiy have been investigated. XRD patterns reveal that the CdS films deposited from cadmium chloride have an hexagonal structure. Their preferential orientation changes from (002) to (100) with the thermal annealing. Films deposited from cadmium acetate are amorphous but improve their crystallinity with annealing. SEM analysis shows that the grains of the as deposited films are randomly shaped and appear to be bigger in the case of the CdS prepared from cadmium chloride. The optical transmission of the layers are in the 70–80 % range for wavelength above the band gap absorption which makes them more appropriate as window material in heterojunction solar cells.     

Effect of substrates on the structural,morphological, and optical properties of sprayed CdO thin films using nebulizer

CdO thin films were deposited on glass, quartz, FTO, silicon wafers of p-type and n-type at 200?°C of substrate temperature employing spray pyrolysis technique using nebulizer. As deposited cadmium oxide thin films were analyzed to find crystallite size, morphology of the substrate, elemental composition and band gap using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX) and UV–Vis spectrophotometer. Nature of the thin film was found to be polycrystalline with face centered cubic structure with (111) preferential orientation and evaluated structural parameters show significant effect of used substrates. Spherical sized grains were observed on the surface of the thin films using SEM. The EDAX analysis confirmed that cadmium and oxygen were present in the sample. Direct allowed transition with band gap values lying in the range 2.34–2.44?eV for all the films deposited on various substrates. Among, these thin film coated on FTO substrate was found to have high crystallinity with a narrow band gap, which may be more suitable for opto-electronic applications.

Open image in new window

The absorption co-efficient spectra and inset of transmittance spectra with wavelength of CdO thin films at different substrates (Glass, Quartz and FTO).

     

Photoluminescence emission behavior on the reduced band gap of Fe doping in CeO2-SiO2 nanocomposite and photophysical properties

Fe/CeO₂-SiO₂ nanocomposite was synthesized via hydrothermal method. Bond length of nanocomposite was determined through FTIR analysis, while Raman analysis showed lattice relaxation of CeO₂ phase in Fe/CeO₂-SiO₂. TEM, XRD and DLS-PSA revealed an increase in size of Fe/CeO₂-SiO₂ as compared to CeO₂-SiO₂ which was attributed to have more oxygen vacancies in CeO₂ after doping of iron. Lattice contraction was also observed in some phases of CeO₂ in Fe/CeO₂-SiO₂ nanocomposite as compared to CeO₂-SiO₂ nanocomposite. This contraction was used for determination of Fe content incorporated in CeO₂ [1 1 1] phase. The band gap values of Fe/CeO₂-SiO₂ nanocomposite were found reduced after doping of Fe by factors of 0.62 and 0.55 eV, respectively. Photoluminescence study of the materials was carried out to study the different type of transitions occurring after absorption of electromagnetic radiation. Photoluminescence intensity at 2.12 eV was found enhanced after doping of Fe due to increased oxygen vacancy. Photocatalytic activity of the nanocomposites was studied with the degradation of chlorpyrifos pesticide.     

Composition and properties of CeO2-SiO2 composite films prepared from film-forming solution

This study focuses on the preparation and properties of CeO₂-SiO₂ thin films with thickness ≤60 nm that can be used as protective coatings for solar cell panels and electrochromic counter electrodes. Thin-film CeO₂-SiO₂ systems on glass and quartz substrates, which are manufactured from film-forming solutions based on cerium(III) nitrate, salicylic acid, and tetraethoxysilane and thermally treated, are mixtures of cerium(IV) (cubic modification) and silicon(IV) (amorphous phase) oxides. The films synthesized are distinguished by a net structure and high visible transmittance (～90-100%). The morphology, phase composition, and optical properties of films were studied by X-ray diffraction, X-ray spectral microanalysis, scanning electron microscopy, spectrophotometry, and ellipsometry.     

添加氧化铈对铁锰复合氧化物脱除羰基硫的影响

采用共沉淀法制备铈掺杂铁锰复合氧化物脱硫剂,对掺杂和未掺杂脱硫剂进行XRD、SEM、TG和XPS分析,并对脱硫剂在325℃下进行脱硫实验。实验结果表明,脱硫剂微粒的晶粒尺寸、分散度和表面元素形态随氧化铈的添加有所改变。和未添加氧化铈脱硫剂相比,添加氧化铈脱硫剂晶粒变小,各元素结合能有所增加。掺杂氧化铈后脱硫剂中氧化物分散性增强,表面吸附氧量增加,脱硫剂在还原气氛中易被还原。脱硫实验表明,添加氧化铈增强了脱硫剂脱除羰基硫的活性,羰基硫脱除精度有较大提高。此外,脱硫剂中添加适量氧化铈可以延长脱硫剂的穿透时间,但过量的氧化铈加入会使穿透时间缩短。     

Effects of doping with CeO2 and calcination temperature on physicochemical properties of the NiO/Al2O3 system

The effects of doping with CeO₂ and calcination temperature on the physicochemical properties of the NiO/Al₂O₃ system have been investigated using DTA, XRD, nitrogen adsorption measurements at −196°C and decomposition of H₂O₂ at 30–50°C. The pure and variously doped solids were subjected to heat treatment at 300, 400, 700, 900 and 1000°C. The results revealed that the specific surface areas increased with increasing calcination temperature from 300 to 400°C and with doping of the system with CeO₂. The pure and variously doped solids calcined at 300 and 400°C consisted of poorly crystalline NiO dispersed on γ-Al₂O₃. Heating at 700°C resulted in formation of well crystalline NiO and γ-Al₂O₃ phases beside CeO₂ for the doped solids. Crystalline NiAl₂O₄ phase was formed starting from 900°C. The degree of crystallinity of NiAl₂O₄ increased with increasing the calcination temperature from 900 to 1000°C. An opposite effect was observed upon doping with CeO₂. The NiO/Al₂O₃ system calcined at 300 and 400°C has catalytic activity higher than individual NiO obtained at the same calcination temperatures. The catalytic activity of NiO/Al₂O₃ system increased, progressively, with increasing the amount of CeO₂ dopant and decreased with increasing the calcination temperature.     

Consequence of doping mediated strain and the activation energy on the structural and optical properties of ZnO:Cr nanoparticles

We report on the sol-gel synthesis of Zn_1−xCr_xO (x=0.0, 0.05, 0.10, 0.15 and 0.20) nanoparticles. These nanoparticles were characterized by using thermogravimetry/differential scanning calorimetry (TG/DSC), X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman and Photoluminescence (PL). Electronegativity of Cr ions (Cr³⁺) reduces the final decomposition temperature by 40 °C and activation energy of the reaction when Cr is doped into ZnO. Doping of higher Cr concentration (x≥0.10) into ZnO shows formation of secondary spinel (ZnCr₂O₄) phase along with the hexagonal (ZnO) and is revealed by XRD. Formation of secondary phase changes the activation energy of the reaction and thus the strain in ZnO lattice. In Raman spectra, additional Raman modes have been observed for Zn_1−xCr_xO nanoparticles, which can be assigned to the modes generated due to Cr doping. The Cr doping into ZnO is also supported by PL, in which vacancies are formed with Cr ion incorporation and emission band shifts towards higher wavelength.     

Effect of sodium hydroxide pre-treatment on the optical and structural properties of lyocell

Lyocell is a type of regenerated cellulose. Fibres spun from cellulose solution in N-methylmorpholine-N-oxide hydrate consist of crystalline cellulose II and amorphous cellulose. Lyocell fabrics were treated with aqueous sodium hydroxide solution (NaOH) to study the influence of alkali on optical and structural properties. It was observed that sodium hydroxide treatment causes the density, orientation and crystallinity of lyocell fibre to decrease with increasing sodium hydroxide concentration, a corresponding decrease in tensile strength is also observed. The greatest change in fibre properties occurs between 3.0 and 5.0 mol dm⁻³ NaOH. This is attributed to the onset of formation of Na-cellulose II at 3.0 mol dm⁻³ NaOH; a fully formed Na-cellulose II structure is expected above 6.8 mol dm⁻³ NaOH. Formation of Na-cellulose II causes plasticization of the lyocell fibres as both inter- and intra-molecular hydrogen bonds are broken by these higher sodium hydroxide concentrations.     

Effect of Ag doping concentration on the electronic and optical properties of anatase TiO2: a DFT-based theoretical study

The electronic and optical properties of pure and Ag-doped anatase TiO₂ have been calculated by spin-polarized density functional theory. Ag-doped TiO₂ with different Ag doping concentrations ranging from 2.08 to 8.33 % was investigated, and the electronic and optical properties evaluated. Substitutional Ag doped at Ti sites introduced Ag 4d states just above the valence-band maximum, which may help in shifting visible-light excited electrons to the conduction band. Our results show that increasing the doping concentration will enhance visible-light absorption up to Ag doping concentration of 6.25 %; however, further increase of the doping concentration leads to a decrease in visible-light absorption. These results indicate the possibility of tailoring the band gap and optical absorption of TiO₂ doped with Ag by varying the doping concentration. The enhanced visible-light absorption for Ag-doped TiO₂ with doping concentration of 6.25 % may be due to the existence of widely distributed Ag 4d states above the valence-band maximum and the optimal doping concentration. Ag doping shifted the absorption edge of TiO₂ towards visible light, consistent with recent experimental results. Our calculation results provide a reasonable explanation for the experimental findings.     

Influences of Co doping on the structural,optical and magnetic properties of ZnO nanorods synthesized by hydrothermal route

Pure and Co-doped ZnO nanorods have been synthesized by a hydrothermal process. The structure, morphology and properties of as-prepared samples have been studied using X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) spectrometer as well as by superconducting quantum interference device (SQUID). The structure and morphology analyses show that Co doping can slightly impede the ZnO crystallinity, influence the nanorods morphology, but cannot change the preferred growth orientation of ZnO nanorods. The amount of Co doping contents is about 3.0 at% in ZnO nanorods and dopant Co²⁺ ions substitute Zn²⁺ ions sites in ZnO nanocrystal without forming any secondary phase. The optical measurements show that the Co doping can effectively tune energy band structure and enrich surface states in both UV and VL regions, which lead to novel PL properties of ZnO nanorods. In addition, ferromagnetic ordering of the as-synthesized Zn_1?xCo_xO nanorod arrays has been observed at room temperature, which should be ascribed to sp–d and d–d carrier exchange interactions and presence of abundant defects and oxygen vacancies.