Improvement of opipramol base solubility by complexation with β-cyclodextrin

Opipramol (OPI), a tricyclic antidepressant and anxiolytic compound, is administered orally in the form of a dihydrochloride. Salt form of the drug has a higher solubility in water and hence bioavailability and stability. A similar effect can be achieved by closing the hydrophobic part of the drug molecule in the cyclodextrin cavity. The paper presents opipramol inclusion complexes with beta-cyclodextrin (β-CD) in 1:1 molar ratio. Studies on the formation of inclusion complexes were carried out both in solution and in the solid state. The formation and physicochemical characterisation of the complexes were determined by UV spectroscopic measurement (UV–vis), Fourier Transform Infrared (FTIR) Spectroscopy, ¹H Nuclear Magnetic Resonance (¹H NMR, 2D NOESY NMR), thermoanalytical methods (TGA – Termogravimetric analysis, DSC – differential scanning calorimetry), X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The phase solubility profile with β-CD was classified as the A_N- type, indicating the formation of the inclusion complex with a drug.     

Enhancement of aqueous solubility of tricyclic acyclovir derivatives by their complexation with hydroxypropyl-β-cyclodextrin

Solubilities of tricyclic acyclovir derivatives in buffered aqueous solutions of hydroxypropyl-β-cyclodextrin (HP-β-CD) at pH 5.5 and 7.0 were determined at 25 and 37 °C. Complexation of these compounds with HP-β-CD resulted in a noticeable increase of their solubility; nevertheless it was limited to tricyclic derivatives of acyclovir carrying an aryl substituent. Combination of ¹H NMR and DSC techniques demonstrated the existence of inclusion complexes between acyclovir derivatives and HP-β-CD. The stability constants, estimated using the Higuchi–Connors method, were found in the range of 10–100 M⁻¹. Additionally, the pK _a values at 25 °C and molar extinction coefficients in aqueous buffered solutions were also determined for all studied compounds.     

Release control of fragrances by complexation with β-cyclodextrin and its derivatives

The release control of fragrances, benzyl acetate (BA), citral (CR), linalool (LL), citronellol (CL) and linalyl acetate (LA), was conducted using β-cyclodextrin (β-CyD), 2-hydroxypropyl-β-CyD (HP-β-CyD) and 2,6-di-O-methyl β-CyD (DM-β-CyD). The release rate of the fragrances from 30% ethanol/water solution was significantly suppressed by the complexation with these CyDs, and the suppressing effect increased in the order of β-CyD?<?HP-β-CyD?<?DM-β-CyD. The concentration-dependent change of the release rate was quantitatively analyzed to obtain the stability constant (Kc) of the fragrance-CyD complexes. These Kc values were in good agreement with those determined by the solubility method. The results suggest that the release of fragrances can be prolonged by the complexation with β-CyDs and their effects can be controlled by choosing appropriate CyD derivatives with higher Kc values and by setting proper concentrations of the host molecules.     

Liposome solubilization induced by complexation with dimeric β-cyclodextrin

Dimeric β-cyclodextrins (β-CD) were prepared from the reaction of native β-CD with epichlorohydrin under basic conditions, and the effects on the diacetylene (DA) and polydiacetylene (PDA) liposomes have been investigated. Vesicular DA was solubilized in the presence of dimeric β-CD with the consequent inhibition of polymerization. The result is attributed to the formation of a complex between dimeric β-CD and DA liposomes, and it is clearly differentiated from that of monomeric β-CD. Furthermore, the ordered supramolecular structure of PDA was perturbed by the dimeric β-CD, which was detected from the visible color change. Finally, the morphological characteristics and size of PDA in the absence and presence of dimeric β-CD were examined using transmission electron microscopy and dynamic light scattering The results show fused structure of size more than 200 nm along with the deformation of the vesicles, and they represent a novel phenomenon of liposome structure induced by complexation with dimeric β-CD. The evaluated physicochemical characteristics can be applied to the development of carbohydrate-based detergents.     

Study of complexation of gliclazide with β-cyclodextrin in solution by nmr techniques

The study of complexation between GL and -CD in liquid medium has been carried out by phase-solubility,¹H and¹³C NMR studies. A formation complex is observed from the phase solubility diagram, being the average association constant of 1094 M^–1, The NMR studies revealed the preferent complexation of the aliphatic moiety of GL. The aromatic moiety is also entrapped, but in minor extent, by the CD molecules.     

Inclusion of acaricides by complexation withβ-cyclodextrin

Many synthetic pesticides (herbicides, insecticides, fungicides etc.) can be complexed with cyclodextrins. The inclusion complexes of acaricides such as Fenson, Chlorfenson and Genite were prepared. The formation of inclusion complexes was established by UV and X-ray diffraction techniques. The host-to-guest ratio was determined by UV spectral and GLC methods.This paper is dedicated to Professor A.B. Kulkarni on his 75th birthday.     

Removal of organic micro-pollutants from water by β-cyclodextrin triazine polymers

β-Cyclodextrin (CD) polymers were synthesized by nucleophilic substitutions between β-CD with cyanuric chloride. Insoluble polymers were obtained. Polymers were characterized by DSC, TGA, FTIR, SS-¹³CNMR. Polymers and activated carbon (AC-Darco) were used to remove model micro-pollutants of bisphenol-A (BPA), 2-naphthol, 2-cholor-biphenyl (PCBNO1), benzene and dibutyl phthalate from water. The results showed that β-CD-triazine polymers showed better performance to adsorb BPA compared with activated carbon; β-CD-triazine polymer showed similar performance to activated carbon on removing benzene from water; however, it showed worse performance for removing 2-naphthol, PCBNO1 and dibutylphthalate by comparison with activated carbon. β-CD-triazine polymers with varying ratio of β-CD to cyanuric chloride were synthesized and their performance on model micro-pollutants were evaluated. Removal efficiency of micro-pollutants from water for β-CD-triazine polymers correlated with their CD concentration except for removing benzene which showed similar performance.     

Effect of β-cyclodextrin complexation on physicochemical properties of zaleplon

The physicochemical properties and dissolution profile of zaleplon (ZPN) β-cyclodextrin (βCD) inclusion complex were investigated. The phase solubility profile of ZPN with β-cyclodextrin was classified as A_L-type. Stability constant with 1:1 molar ratio was calculated from the phase solubility diagram and the aqueous solubility of ZPN was found to be enhanced by 714% (p < 0.001) for β-cyclodextrin. Binary systems of ZPN with βCD were prepared by kneading method. The solid-state properties of complex were characterized by differential scanning calorimetry, Fourier transformation-infrared spectroscopy and powder X-ray diffractometry. It could be concluded that ZPN could form inclusion complex with β-cyclodextrin. The dissolution profile of inclusion complex was determined and compared with those of ZPN alone and its physical mixture. The dissolution rate of ZPN was significantly increased by complexation with βCD, as compared with pure drug and physical mixture.     

Study on the complexation of isoquercitrin with β-cyclodextrin and its derivatives by spectroscopy

The inclusion complexes of isoquercitrin (IQ) with cyclodextrins (CDs) including β-cyclodextrin (β-CD), hydroxypropyl-β-cyclodextrin (HP-β-CD) and dimethyl-β-cyclodextrin (DM-β-CD) have been investigated using the methods of steady-state fluorescence, UV-vis absorption and induced circular dichroism. The stoichiometric ratio of the three complexes was found to be 1:1 and the stability constants (K) were estimated from spectrofluorometric titrations, as well as the thermodynamic parameters. Maximum inclusion ability was measured in the case of DM-β-CD due to the increased hydrophobicity of the host cavity, followed by HP-β-CD and β-CD. The effect of pH on the complexation process was also quantitatively assessed. IQ exists in different molecular forms depending on pH and β-CDs were most suitable for inclusion of the neutral form of IQ. The phase-solubility diagrams obtained with β-CD, HP-β-CD and DM-β-CD were all classical A_L type. And DM-β-CD provided the best solubility enhancement, 12.3-fold increase compared to 2.8- and 7.5-fold increase for β-CD and HP-β-CD. The apparent stability constants obtained from the solubility data at 25 °C were comparable with those obtained from the fluorescence assays. Moreover, ¹H NMR was carried out, which revealed that the IQ favorably inserted into the inner cavity from the chromone part instead of the phenyl part, which was in agreement with molecular modeling studies.     

Effect of preparation method on complexation of Cefdinir with β-cyclodextrin

The inclusion behaviour of β-cyclodextrin (βCD) was studied toward Cefdinir (CEF) in order to enhance the solubility and dissolution rate, following cyclodextrin complexation. Drug cyclodextrin solid systems were prepared by conventional methods of kneading (KN), co-evaporation (CE), spray drying (SD) and with a novel approach of microwave irradiation (MWI). The formation of inclusion complexes with βCD in the solid state, were confirmed by Differential scanning calorimetry (DSC), Fourier Transform Infrared spectroscopy (FTIR) and Scanning Electron Microscopy (SEM) studies, and comparative studies on the in vitro dissolution of CEF were carried out. Characterization of binary system by DSC, FTIR and SEM indicated that SD and MWI method resulted in formation of true complexes. Binary systems showed significant increase in dissolution rate as compared to plain drug. Amongst the binary systems MWI products were prepared in least time with better yield and highest dissolution rate.     

Enhanced water-solubility of albendazole by hydroxypropyl-β-cyclodextrin complexation

The inclusion complexation of methyl (5-(propylthio)-1H-benzimidazol-2-yl) carbamate, albendazole (ABZ) with 2-hydroxypropyl--cyclodextrin (HPCD) in water was investigated with a view to improving the low aqueous solubility of the drug. The combination of albendazole and HPCD in a molar ratio of 1/10 resulted in a significant increase in the aqeous solublity of the drug, up to 3500 times. Albendazole/HPCD complexes could be recommended as a parenterally administered formulation because of its good solubility properties and the safety of the cyclodextrin used.     

Dimerisation and complexation of 6-(4′-t-butylphenylamino)naphthalene-2-sulphonate by β-cyclodextrin and linked β-cyclodextrin dimers

This study shows that stereochemical factors largely determine the extent to which 6-(4′-t-butylphenylamino)-naphthalene-2-sulphonate, BNS^?  and its dimer, (BNS^? )₂, are complexed by β-cyclodextrin, βCD, and a range of linked βCD dimers. Fluorescence and ¹H NMR studies, respectively, show that BNS^?  and (BNS^? )₂ form host–guest complexes with βCD of the stoichiometry βCD.BNS^?  (10^? 4 K ₁ = 4.67 dm³ mol^? 1) and βCD.BNS₂ ^2 ?  (10^? 2 K ₂′ = 2.31 dm³ mol^? 1), where the complexation constant K ₁ = [βCD.BNS^? ]/([βCD][BNS^? ]) and K ₂′ = [βCD. (BNS^? )₂]/([βCD.BNS^? ][BNS^? ]) in aqueous phosphate buffer at pH 7.0, I = 0.10 mol dm³ at 298.2 K. (The dimerisation of BNS^?  is characterised by 10^? 2 K _d = 2.65 dm³ mol^? 1.) For N,N-bis((2^AS,3^AS)-3^A-deoxy-3^A-β-cyclodextrin)succinamide, 33βCD₂su, N-((2^AS,3^AS)-3^A-deoxy-3^A-β-cyclodextrin)-N′-(6^A-deoxy-6^A-β-cyclodextrin)urea, 36βCD₂su, N,N-bis(6^A-deoxy-6^A-β-cyclodextrin)succinamide, 66βCD₂su, N-((2^AS,3^AS)-3^A-deoxy-3^A-β-cyclodextrin)-N′-(6^A-deoxy-6^A-β-cyclodextrin)urea, 36βCD₂ur, and N,N-bis(6^A-deoxy-6^A-β-cyclodextrin)urea, 66βCD₂ur, the analogous 10^? 4 K ₁ = 11.0, 101, 330, 29.6 and 435 dm³ mol^? 1 and 10^? 2 K ₂′ = 2.56, 2.31, 2.59, 1.82 and 1.72 dm³ mol^? 1, respectively. A similar variation occurs in K ₁ derived by UV–vis methods. The factors causing the variations in K ₁ and K ₂ are discussed in conjunction with ¹H ROESY NMR and molecular modelling studies.     

Unusual inversion phenomenon of β-cyclodextrin dimers in water

A conformational analysis of three triazole-containing bridged bis-β- cyclodextrins (CD) has been carried out to evaluate their recognition ability. NMR spectroscopy and ITC measurements clearly demonstrate that one of the CD glucopyranose units undergoes a 360° rotation in water so that the spacer linking the two CDs is deeply included into one of the CD cavities. The amplitude of this inversion phenomenon depends on the nature of the spacer and results in a limited accessibility to the CD cavities in line with previous catalytic results.     

The role of water release from the cyclodextrin cavity in the complexation of benzoyl chlorides by dimethyl-β-cyclodextrin

The influence of temperature on the solvolysis of substituted benzoyl chlorides in the presence of dimethyl-β-cyclodextrin (DM-β-CD) was studied. Based on the influence of the DM-β-CD concentration on chemical reactivity in this process, the cyclodextrin has a catalytic effect on the solvolysis of 4-nitrobenzoyl chloride (4-NO₂) but an inhibitory effect on that of 4-methoxy-(4-MeO), 3-chloro-(3-Cl) and 3-trifluoromethyl-(3-CF₃) benzoyl chlorides. These disparate effects are related to a difference in reaction mechanism; thus, DM-β-CD catalyses associative solvolysis and inhibits dissociative solvolysis. Examining the influence of temperature on the solvolytic process allowed the stoichiometry of the host-guest complexes formed to be established. The formation constants for the complexes of meta-substituted benzoyl chlorides increased with increasing temperature. On the other hand, the equilibrium formation constants for the 1:1 host-guest complexes of para-substituted benzoyl chlorides exhibited the opposite trend. The equilibrium formation constant for 2:1 host-guest complexes for the para-substituted benzoyl chlorides increased with increasing temperature. These differences are ascribed to the release of water from the DM-β-CD cavity during the formation of the host-guest complex.     

Destabilization of cytochrome c by modified β-cyclodextrin

To clarify the effect of cyclodextrin (CD) on the stability of cytochrome c, the thermal denaturation of cytochrome c was measured by differential scanning calorimetry in aqueous solutions of β-CD modified with three substituents: methyl, acetyl, and 2-hydroxylpropyl groups. The midpoint temperature of thermal denaturation decreased with the addition of modified β-CDs, indicating that cytochrome c was destabilized. The destabilization effect of CD depended on the substituent and increased in the order of acetyl>methyl>2-hydroxypropyl. The estimated binding number and binding constant of the modified β-CDs for cytochrome c are 5.0 ± 1.0 and 10.3 ± 2.9 M^?1 for methyl-β-CD, 13.8 ± 3.6 and 4.7 ± 1.6 M^?1 for acetyl-β-CD, and 2.8 ± 0.9 and 7.0 ± 3.0 M^?1 for 2-hydroxypropyl-β-CD. The destabilization effect of acetyl-β-CD is the highest because many CD molecules interact with proteins by the inclusion effect of CD and the inhibition effect of the acetyl group on the hydrogen bond in the secondary structure. In contrast, the stabilization effect of 2-hydroxypropyl-β-CD is the smallest because the steric exclusion of the 2-hydroxypropyl group inhibits the binding of CD to cytochrome c as compared with the smaller structure of the methyl group. Dependency of the destabilization effect on the molar ratio of CD to cytochrome c suggests that the destabilization effect of CD is caused not only by the “direct” interaction of CD with proteins but also by the “indirect” interaction of CD which promotes the solvation of hydrophobic groups by altering the water structure as observed in urea.     

A quartz crystal microbalance study of β-cyclodextrin self assembly on gold and complexation of immobilized β-cyclodextrin with adamantane derivatives

Quartz crystal microbalance (QCM) was used to study the self-assembly of per-6-thio-β-cyclodextrin (t₇-βCD) on gold surfaces, and the subsequent inclusion interactions of immobilized βCD with adamantane-poly(ethylene glycol) (5,000 MW, AD-PEG), 1-adamantanecarboxylic acid (AD-C) and 1-adamantylamine (AD-A). From a 50 μM solution of t₇-βCD in 60:40 DMSO:H₂O, a t₇-βCD layer was formed on gold with surface density of 71.7 ± 2.7 pmol/cm², corresponding to 80 ± 3% of close-packed monolayer coverage. Gold sensors with immobilized t₇-βCD were then exposed alternately to six different concentrations of AD-PEG, 500 μM AD-C or 500 μM AD-A aqueous solutions for association, and water for dissociation. Association of AD-PEG conformed to a Langmuir isotherm, with a best fit equilibrium constant K = 125,000 ± 18,000 M⁻¹. For AD-C and AD-A, association (k _a ) and dissociation (k _d ) rate constants were extracted from kinetic profiles by fitting to the Langmuir model, and equilibrium constants were calculated. The parameters for AD-C were found to be: k _a = 100 ± 5 M⁻¹ s⁻¹, k _d = 110 (±18) × 10⁻⁴ s⁻¹, and K = 9,400 ± 1,700 M⁻¹. For AD-A, k _a = 58 ± 6 M⁻¹ s⁻¹, k _d = 154 (±7) × 10⁻⁴ s⁻¹, and K = 3,800 ± 400 M⁻¹. The results demonstrate the utility of QCM as a tool for studying small molecule surface adsorption and guest–host interactions on surfaces. More specifically, the kinetic and thermodynamic data of AD-C, AD-A, and AD-PEG inclusion with immobilized t₇-βCD form a basis for further surface association studies of AD-X conjugates to advance surface sensory and coupling applications.     

Effect of inclusion complexation on the photophysical behavior of diphenylamine in β-cyclodextrin medium: a study by electronic spectra

Spectral characteristics of diphenylamine (DPA) have been investigated in β-cyclodextrin (β-CDx) solution. The formation of the complex was revealed by UV, steady state and time-resolved fluorescence spectroscopy. The stoichiometry of DPA:β-CDx complex, determined using Benesi-Hildebrand equation and Job's continuous variation method is 1:1. The binding constants calculated from various methods are reported. This inclusion complex formation from DPA and β-CDx was also confirmed by the FT-IR spectral study and SEM image analysis of solid complex prepared by co-precipitation method.