Optimisation of sample treatment for arsenic speciation in alga samples by focussed sonication and ultrafiltration

A procedure for arsenic species fractionation in alga samples (Sargassum fulvellum, Chlorella vulgaris, Hizikia fusiformis and Laminaria digitata) by extraction is described. Several parameters were tested in order to evaluate the extraction efficiency of the process: extraction medium, nature and concentration (tris(hydroxymethyl)aminomethane, phosphoric acid, deionised water and water/methanol mixtures), extraction time and physical treatment (magnetic stirring, ultrasonic bath and ultrasonic focussed probe). The extraction yield of arsenic under the different conditions was evaluated by determining the total arsenic content in the extracts by ICP-AES. Arsenic compounds were extracted in 5 mL of water by focussed sonication for 30 s and subsequent centrifugation at 14,000 × g for 10 min. The process was repeated three times. Extraction studies show that soluble arsenic compounds account for about 65% of total arsenic.

An ultrafiltration process was used as a clean-up method for chromatographic analysis, and also allowed us to determine the extracted arsenic fraction with a molecular weight lower than 10 kDa, which accounts for about 100% for all samples analysed.

Speciation studies were carried out by HPLC–ICP-AES. Arsenic species were separated on a Hamilton PRP-X100 column with 17 mM phosphate buffer at pH 5.5 and 1.0 mL min⁻¹ flow rate. The chromatographic method allowed us to separate the species As(III), As(V), MMA and DMA in less than 13 min, with detection limits of about 20 ng of arsenic per species, for a sample injection volume of 100 μL. The chromatographic analysis allowed us to identify As(V) in Hizikia (46 ± 2 μg g⁻¹), Sargassum (38 ± 2 μg g⁻¹) and Chlorella (9 ± 1 μg g⁻¹) samples. The species DMA was also found in Chlorella alga (13 ± 1 μg g⁻¹). However, in Laminaria alga only an unknown arsenic species was detected, which eluted in the dead volume.     

Assessment of total arsenic and arsenic species stability in alga samples and their aqueous extracts

In order to achieve reliable information on speciation analysis, it is necessary to assess previously the species stability in the sample to analyse. Furthermore, in those cases where the sample treatment for species extraction is time-consuming, an assessment of the species integrity in the extracts is of paramount importance. Thus, the present paper reports total arsenic and arsenic species stability in alga samples (Sargassum fulvellum and Hizikia fusiformis), as well as in their aqueous extracts, which were stored in amber glass and polystyrene containers at different temperatures. Total arsenic determination was carried out by inductively coupled plasma atomic emission spectroscopy (ICP-AES), after sample acid digestion in a microwave oven, while arsenic speciation was conducted by anion exchange high performance liquid chromatography on-line coupled to ICP-AES, with and without sample introduction by hydride generation (HPLC-ICP-AES and HPLC-HG-ICP-AES), after aqueous microwave-assisted extraction. The results obtained for solid alga samples showed that total arsenic (for Hijiki alga) and arsenic species present (As(V) for Hijiki and NIES No. 9 Sargasso) are stable for at least 12 months when samples are stored in polystyrene containers at +20 degrees C. On the other hand, a different behaviour was observed in the stability of total arsenic and As(V) species in aqueous extracts for both samples, being the best storage conditions for Sargasso extracts a temperature of -18 degrees C and polystyrene containers, under which they are stable for at least 15 days, while Hijiki extracts must be stored in polystyrene containers at +4 degrees C in order to ensure the stability for 10 days.     

Arsenic Speciation in Sargassum fusiforme by Microwave-Assisted Extraction and LC-ICP-MS

Sargassum fusiforme, the common Chinese edible seaweeds, was investigated for total arsenic concentration by ICP-MS and for individual arsenic species by LC-ICP-MS. For this purpose, a microwave-assisted procedure was used for the extraction of arsenic species in freeze-dried seaweed and an analytical procedure for the sensitive and efficient speciation of the arsenic species As(III), dimethylarsinic acid, monomethyl arsonic acid, As(V), arsenobetaine and arsenocholine was optimized. Arsenic compounds were extracted from the seaweed with a methanol/water mixture; the extracts were evaporated to dryness, redissolved in water, and chromatographed on an anion exchange column. The arsenic species in Sargassum fusiforme are abundant. In some sample, the majority of arsenic compounds detected in the extracts were inorganic species, with a predominance of As (V). In addition, some significant amounts of unidentified arsenic compounds were also observed in the extracts.

     

Evaluation of extraction methods for arsenic speciation in polluted soil and rotten ore by HPLC-HG-AFS analysis

Three extraction systems including shaking, ultrasonic and microwave-assisted extraction were evaluated. Water and phosphate buffer were tested for the extraction of arsenic compounds in polluted soil, describing the water-soluble or plant-available fraction. The stabilities and recoveries of various arsenic species indicated that no obvious changes of species occurred during the extraction process. The raw extracts were cleaned up by C₁₈ cartridge before analysis. Having optimized the extraction conditions, the arsenic species in polluted soil and ore from the different pollution sources were extracted by microwave-assisted extraction with 0.5 M phosphate buffer as extractant. Arsenic species were quantitatively determined by high performance liquid chromatography on-line coupled with hydride generation atomic fluorescence spectrometry (HPLC-HG-AFS). As(III) and As(V) were the major arsenic species in the polluted soil samples resulting from irrigation by waste water. As^V was the only form found in the rotten ore sampled in mining area. During the extraction process, the recoveries of spiked As(III), As(V), DMA(V) and MMA(V) were 85.4 ± 7.2%, 80.2 ± 6.7%, 101.6 ± 6.7% and 98.8 ± 9.1%, respectively, showing that most water-soluble arsenic could be measured.     

Selective substoichiometry for inorganic arsenic(V) by ion-pair extraction with pyrogallol/tetraphenyl-arsnium chloride and its application in the analysis of seaweed

Arsenic(V) is substioichiometrically extracted from 0.4–3 M sulfuric acid solutions into 1,2-dichloroethane with 1.0 × 10^?5 M teraphenylarsnium chloride in the presence of 2.0 × 10^?1 M pyrogallol. Reproducibility of the substoichiometric extractions with a constant amount of tetraphenylarsonium chloride is high (0.5% RSD). This substiochiometric extraction is very selective for arsenic(V) from arsenic(III), monomethylarsonic acid, and dimethylarsinic acid. The extraction combined with the isotope dilution principle was applied to the determination of arsenic(V) in an acid-digestd solution of a seaweed sample (Laminaria religiosa Miyabe) and to the determination of total arsenic in this sample.     

Biomethylation of Arsenic in an Arsenic-rich Freshwater Environment

Arsenic circulation in an arsenic-rich freshwater ecosystem was elucidated to detect arsenic species in the river water and in biological samples living in the freshwater environment. Water-soluble arsenic compounds in biological samples were extracted with 70% methanol. Samples containing arsenic compounds in the extracts were treated with 2 mol dm³ of sodium hydroxide and reduced with sodium borohydride. The detection of arsenic species was accomplished using a hydride generation/cold trap/cryofocus/gas chromatography-mass spectrometry (HG/CT/CF/GC-MS) system. The major arsenic species in the river water, freshwater algae and fish are inorganic arsenic, dimethylarsenic and trimethylarsenic compounds, respectively. Trimethylarsenic compounds are also detected in aquatic macro-invertebrates. The freshwater unicellular alga Chlorella vulgaris, in a growth medium containing arsenate, accumulated arsenic and converted it to a dimethylarsenic compound. The water flea Daphnia magna, which was fed on arsenic-containing algae, converted it to a trimethylarsenic species. © 1997 by John Wiley & Sons, Ltd.     

Speciation analysis of arsenic compounds in edible oil by ion chromatography-inductively coupled plasma mass spectrometry

An inductively coupled plasma mass spectrometer (ICP-MS) was used as an ion chromatographic (IC) detector for the speciation analysis of arsenic in edible oil. The arsenic species studied include arsenite, arsenate, monomethylarsonic acid, dimethylarsinic acid, arsenobetaine and arsenocholine. Gradient elution using (NH(4))(2)CO(3) and methanol at pH 8.5 allowed the chromatographic separation of all species in less than 8 min. Effluents from the IC column were delivered to the nebulizer of ICP-MS for the determination of arsenic. The concentrations of arsenic species have been determined in several used and fresh vegetable oil samples. In this study, a microwave-assisted extraction method was used for the extraction of arsenic species from oil samples. The extraction efficiency was better than 92% and the recoveries from spiked samples were in the range of 90-105%. The precision between sample replicates was better than 8% for all determinations. The limits of detection were in the range of 0.008-0.024 ng mL(-1) for various arsenic species based on peak height, which corresponded to 0.08-0.24 ng g(-1) in the original oil sample. The major arsenic species in the used oil samples varied based on the food items cooked.     

Extraction and speciation of arsenic in plants grown on arsenic contaminated soils

A sequential arsenic extraction method was developed that yielded extraction efficiencies (EE) that were approximately double those using current methods for terrestrial plants. The method was applied to plants from two arsenic contaminated sites and showed potential for risk assessment studies. In the method, plants were extracted first by 1:1 water-methanol followed by 0.1 M hydrochloric (HCl) acid. Total arsenic in plant and soil samples collected from contaminated sites was mineralized by acid digestion and detected by inductively coupled plasma-atomic emission spectrometry (ICP-AES) and hydride generation-atomic absorption spectrometry (HG-AAS). Arsenic speciation was done by high performance liquid chromatography coupled with HG-AAS (HPLC-HGAAS) and by HPLC coupled with ICP-mass spectrometry (HPLC-ICP-MS). Spike recovery experiments with arsenite (As(III)), arsenate (As(V)), methylarsonic acid (MA) and dimethylarsinic acid (DMA) showed stability of the species in the extraction processes. Speciation analysis by X-ray absorption near edge spectroscopy (XANES) demonstrated that no transformation of As(III) and As(V) occurred due to sample handling. Dilute HCl was efficient in extracting arsenic from plants; however, extraction and determination of organic species were difficult in this medium. Sequential extraction with 1:1 water-methanol followed by 0.1 M-HCl was most useful in extracting and speciating both organic and inorganic arsenic from plants. Trace amounts of MA and DMA in plants could be detected by HPLC-HGAAS aided by the process of separation and preconcentration of the sequential extraction method. Both organic and inorganic arsenic compounds could be detected simultaneously in synthetic gastric fluid extracts (GFE) but EEs by this method were lower than those of the sequential method. The developed sequential method was shown to be reliable and applicable to various terrestrial plants for arsenic extraction and speciation.     

A gradient anion exchange chromatographic method for the speciation of arsenic in lobster tissue extracts

A gradient anion exchange chromatographic technique was developed for the separation of arsenobetaine (AsB), arsenocholine (AsC), arsenite (As(III)), arsenate (As(V)), monomethylarsonic acid (MMAA) and dimethylarsinic acid (DMAA) in one chromatographic run. This technique used low residue ammonium carbonate buffer and the inductively coupled plasma-mass spectrometry (ICP-MS) chromatograms showed little baseline drift. Gradient elution improved peak shape and peak separation. The separation was completed in approximately 27 min with low detection limits (0.017-0.029 mug As kg(-1)). Baseline resolution of all the arsenic species evaluated was achieved when the concentration of AsC was less than approximately 12.5 mug As kg(-1). This technique was successfully applied to different extracts of a standard reference material, TORT-2, and lobster tissue. AsB was found to be the major arsenic species present. AsC, DMAA, MMAA and As(V) were also found, although MMAA was not detected in all of the TORT-2 extracts. Two unknown peaks found may be due to the presence of arsenosugars or other arsenic species. Discrepancy between extraction recoveries previously determined using flow injection-ICP-MS and the high-performance liquid chromatography-ICP-MS was observed in some cases. The differences may be due to the extraction technique and/or conditions at which the extractions were performed.     

Speciation analysis of arsenic and selenium compounds in environmental and biological samples by ion chromatography-inductively coupled plasma dynamic reaction cell mass spectrometer

An inductively coupled plasma mass spectrometer (ICP-MS) was used as an ion chromatographic (IC) detector for the speciation analysis of arsenic and selenium. The arsenic and selenium species studied included arsenite [As(III)], arsenate [As(V)], monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenobetaine (AsB), selenite [Se(IV)] and selenate [Se(VI)]. Gradient elution using (NH₄)₂CO₃ and methanol at pH 9 allowed the chromatographic separation of all species in less than 12 min. Effluents from the IC column were delivered to the nebulization system of ICP-DRC-MS for the determination of arsenic and selenium. The potentially interfering ³⁸Ar⁴⁰Ar⁺ and ⁴⁰Ar⁴⁰Ar⁺ at the selenium masses m/z 78 and 80 were reduced in intensity by approximately 3 orders of magnitude by using 0.6 mL min⁻¹ CH₄ as reactive cell gas in the DRC while an Rpq value of 0.3 was used. Meanwhile, arsenic was determined as the adduct ion ⁷⁵As¹²CHH⁺ at m/z 89, which is more sensitive than ⁷⁵As. The limits of detection for arsenic and selenium were in the range of 0.002–0.01 ng mL⁻¹ and 0.01–0.02 ng mL⁻¹, respectively, based on peak height. The relative standard deviation of the peak areas for five injections of 5 ng mL⁻¹ As and Se mixture was in the range of 2–4%. The concentrations of arsenic and selenium species have been determined in urine samples collected locally. The major As and Se species in urines were AsB, DMA and probably selenosugar at concentration of 20–40, 15–19 and 17–31 ng mL⁻¹, respectively. The recoveries were in the range of 94–105% for all the determinations. This method has also been applied to determine various arsenic compounds in two fish samples. In this study, a simple and rapid microwave-assisted extraction method was used for the extraction of arsenic compounds from fish. The arsenic species were quantitatively leached with an 80% v/v methanol solution in a focused microwave field during a period of 5 min.     

Identification of arsenic species in sheep‐wool extracts by different chromatographic methods

Sheep on the island of North Ronaldsay (Orkney, UK) feed mostly on seaweed, which contains high concentrations of dimethylated arsenoribosides. Wool of these sheep contains dimethylated, monomethylated and inorganic arsenic, in addition to unidentified arsenic species in unbound and complexed form. Chromatographic techniques using different separation mechanisms and detectors enabled us to identify five arsenic species in water extracts of wool. The wool contained 5.2 ± 2.3 µg arsenic per gram wool. About 80% of the arsenic in wool was extracted by boiling the wool with water. The main species is dimethylarsenic, which accounted for about 75 to 85%, monomethylated arsenic at about 5% and the rest is inorganic arsenic. Depending on the separation method and condition, the chromatographic recovery of arsenic species was between 45% for the anion exchange column, 68% for the size exclusion chromatography (SEC) and 82% for the cation exchange column. The SEC revealed the occurrence of two unknown arsenic compounds, of which one was probably a high molecular mass species. Since chromatographic recovery can be improved by either treating the extract with CuCl/HCl (CAT: 90%) or longer storage of the sample (CAT: 105%), in particular for methylated arsenic species, it can be assumed that labile arsenic–protein‐like coordination species occur in the extract, which cannot be speciated with conventional chromatographic methods. It is clear from our study of sheep wool that there can be different kinds of ‘hidden’ arsenic in biological matrices, depending on the extraction, separation and detection methods used. Hidden species can be defined as species that are not recordable by the detection system, not extractable or do not elute from chromatographic columns. Copyright © 2003 John Wiley & Sons, Ltd.     

Arsenic speciation in chinese seaweeds using HPLC-ICP-MS and HPLC-ES-MS

Three common Chinese edible seaweeds, one brown (Laminaria japonica) and two red (Porphyra crispata and Eucheuma denticulatum), were examined for their total arsenic content. The As species were extracted with yields of 76.4, 69.8 and 25.0%, respectively. Anion-exchange and cation-exchange high-performance liquid chromatography (HPLC) in combination with inductively coupled plasma mass spectrometry (ICP-MS) were used for the separation of the different arsenic species in two of the three seaweed extracts (Laminaria and Porphyra). The main arsenic species in the algal extracts are arseno sugars, although it has been shown that the Laminaria seaweed contains significant amounts of dimethylarsinic acid (DMA). HPLC was coupled with electrospray mass spectrometry (ES-MS) for structural confirmation of the arsenic species. The mass spectrometer settings for the arseno sugars were optimised using standards. The conclusions drawn on the basis of HPLC-ICP-MS were confirmed by the HPLC-ES-MS data. The HPLC-ES-MS method is capable of determining both arseno sugars and DMA in the seaweeds. The unknown compounds seen in the HPLC-ICP-MS chromatogram of Laminaria could not be ascribed to trimethylarsenic oxide or tetramethylarsonium ion.     

Simultaneous determination of arsenic and antimony species in environmental samples using bis(trifluoroethyl)dithiocarbamate chelation and supercritical fluid chromatography.

Simultaneous separation and quantitation of arsenic(III) and antimony(III) can be achieved by extraction with lithium bis(trifluoroethyl)dithiocarbamate followed by supercritical fluid chromatographic (SFC) analysis. Arsenic(V) and antimony(V) are extracted after reduction with potassium iodide and sodium thiosulfate. Detection limits of 7 pg As and 11 pg Sb are achieved using this extraction method and SFC. Application to natural water and biological sample analysis is discussed.     

The extraction and speciation of arsenic in rice flour by HPLC-ICP-MS

Several solvent mixtures and techniques for the extraction of arsenic (As) species from rice flour samples prior to their analysis by HPLC-ICP-MS were investigated. Microwave-assisted extraction using water at 80 °C for 30 min provided the highest extraction efficiency. Total recoveries of extracted As species were in good agreement with the total As concentrations determined by ICP-MS after microwave-assisted acid digestion of the samples. Arsenite [As(III)], arsenate [As(V)] and dimethylarsinic acid (DMAA) were the main species detected in rice flour samples.     

Speciation of arsenic compounds in fish and oyster tissues by capillary electrophoresis-inductively coupled plasma-mass spectrometry

A capillary electrophoresis-inductively coupled plasma-mass spectrometric (CE-ICP-MS) method for the speciation of six arsenic compounds, namely arsenite [As(III)], arsenate [As(V)], monomethylarsonic acid, dimethylarsinic acid, arsenobetaine and arsenocholine is described. The separation has been achieved on a 70 cm length x 75 microm ID fused-silica capillary. The electrophoretic buffer used was 15 mM Tris (pH 9.0) containing 15 mM sodium dodecyl sulfate (SDS), while the applied voltage was set at +22 kV. The arsenic species in biological tissues were extracted into 80% v/v methanol-water mixture, put in a closed centrifuge tube and kept in a water bath, using microwaves at 80 degrees C for 3 min. The extraction efficiencies of individual arsenic species added to the sample at 0.5 microg As/g level were between 96% and 107%, except for As(III), for which it was 89% and 77% for oyster and fish samples, respectively. The detection limits of the species studied were in the range 0.3-0.5 ng As/mL. The procedure has been applied for the speciation analysis of two reference materials, namely dogfish muscle tissue (NRCC DORM-2) and oyster tissue (NIST SRM 1566a), and two real-world samples.     

Arsenic solubility, mobility and speciation in the deposits from a copper production waste storage

The sediments in large pond for discharge of waste products of metallurgical activity were studied with respect to the valence forms of arsenic and its mobility. A sequential extraction procedure for arsenic compounds was applied and optimized according to the nature of analyzed products. During the first stage, the content of water-soluble arsenic compounds was determined, during the second—HCl-soluble forms and during the third—compounds soluble in sodium hydroxide. The optimum conditions for leaching arsenic from sediments (sample weight, concentration and volume of extractants, time of treatment) were established for each fraction.Speciation studies for determining As(III) and As(V) were carried out in the obtained arsenic extracts. The ability of the proposed sequential extraction procedure to specify the valence forms of inorganic arsenic was evaluated using model samples with added As(III) and As(V) and the recovery of spikes has been assessed. It was found that oxidation of As(III) and processes of sorption and sedimentation of As(V) proceed upon dissolution. A depth profiling was performed of the content of diverse forms of Às in two sites. The content of water-soluble As does not exceed 7.4% of total As in the sediments, As(III) being lower than 7.4% of that of the extracted As. The bulk of arsenic compounds (above 78% As) is dissolved in 2M HCl, and As(V) was found to be more than 94% of extracted arsenic. The analytical features of the procedure are as follow: precision, evaluated through the repeatability w > 0.96 and accuracy, estimated by the recovery above 93%, calculated on the basis of a twice repeated analysis of a series of 9 samples.     

Biomethylation and biotransformation of arsenic in a freshwater food chain: Green alga (chlorella vulgaris)→shrimp (neocaridina denticulata)→killifish (oryzias iatipes)

Tolerance, bioaccumulation, biotransformation and excretion of arsenic compounds by the fresh–water shrimp (Neocaridina denticulata) and the killifish (Oryzias latipes) (collected from the natural environment) were investigated. Tolerances (LC₅₀) of the shrimp against disodium arsenate [abbreviated as As(V)], methylarsonic acid (MAA), dimethylarsinic acid (DMAA), and arsenobetaine (AB) were 1.5, 10, 40, and 150μg As ml^?1, respectively. N. denticulata accumulated arsenic from an aqueous phase containing 1 μg As ml^?1 of As(V), 10 μg As ml^?1 of MAA, 30 μg As ml^?1 of DMAA or 150 μg As ml^?1 of AB, and biotransformed and excreted part of these species. Both methylation and demethylation of the arsenicals were observed in vivo. When living N. denticulata accumulating arsenic was transferred into an arsenic–free medium, a part of the accumulated arsenic was excreted. The concentration of methylated arsenicals relative to total arsenic was higher in the excrement than in the organism. Total arsenic accumulation in each species via food in the food chain Green algae (Chlorella vulgaris) → shrimp (N. denticulata) → killifish (O. latipes) decreased by one order of magnitude or more, and the concentration of methylated arsenic relative to total arsenic accumulated increased successively with elevation in the trophic level. Only trace amounts of monomethylarsenic species were detected in the shrimp and fish tested. Dimethylarsenic species in alga and shrimp, and trimethylarsenic species in killifish, were the predominant methylated arsenic species, respectively.     

Optimization of microwave‐assisted extraction for six inorganic and organic arsenic species in chicken tissues using response surface methodology

Response surface methodology was applied to optimize the parameters for microwave‐assisted extraction of six major inorganic and organic arsenic species (As(III), As(V), dimethyl arsenic acid, monomethyl arsenic acid, p‐arsanilic acid, and roxarsone) from chicken tissues, followed by detection using a high‐performance liquid chromatography with inductively coupled mass spectrometry detection method, which allows the simultaneous analysis of both inorganic and organic arsenic species in the extract in a single run. Effects of extraction medium, solution pH, liquid‐to‐solid ratio, and the temperature and time of microwave‐assisted extraction on the extraction of the targeted arsenic species were studied. The optimum microwave‐assisted extraction conditions were: 100 mg of chicken tissue, extracted by 5 mL of 22% v/v methanol, 90 mmol/L (NH₄)₂HPO₄, and 0.07% v/v trifluoroacetic acid (with pH adjusted to 10.0 by ammonium hydroxide solution), ramping for 10 min to 71°C, and holding for 11 min. The method has good extraction performance for total arsenic in the spiked and nonspiked chicken tissues (104.0 ± 13.8% and 91.6 ± 7.8%, respectively), except for the ones with arsenic contents close to the quantitation limits. Limits of quantitation (S/N = 10) for As(III), As(V), dimethyl arsenic acid, monomethyl arsenic acid, p‐arsanilic acid, and roxarsone in chicken tissues using this method were 0.012, 0.058, 0.039, 0.061, 0.102, and 0.240 mg/kg (dry weight), respectively.     

CZE for the speciation of arsenic in aqueous soil extracts

We developed two separation methods using CZE with UV detection for the determination of the most common inorganic and methylated arsenic species and some phenylarsenic compounds. Based on the separation method for anions using hydrodynamic sample injection the detection limits were 0.52, 0.25, 0.27, 0.12, 0.37, 0.6, 0.6, 1.2 and 1.0 mg As/L for phenylarsine oxide (PAO), p-aminophenylarsonic acid (p-APAA), o-aminophenylarsonic (o-APAA), phenylarsonic acid (PAA), 4-hydroxy-3-nitrobenzenearsonic acid (roxarsone), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenite or arsenious acid (As(III)) and arsenate (As(V)), respectively. These detection limits were improved by large-volume sample stacking with polarity switching to 32, 28, 14, 42, 22, 27, 26 and 27 microg As/L for p-APAA, o-APAA, PAA, roxarsone, MMA, DMA, As(III) and As(V), respectively. We have applied both methods to the analysis of the arsenic species distribution in aqueous soil extracts. The identification of the arsenic species was validated by means of both standard addition and comparison with standard UV spectra. The comparison of the arsenic species concentrations in the extracts determined by CZE with the total arsenic concentrations measured by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) indicated that CZE is suited for the speciation of arsenic in environmental samples with a high arsenic content. The extraction yield of phenylarsenic compounds from soil was derived from the arsenic concentrations of the aqueous soil extracts and the total arsenic content of the soil determined by ICP-AES after microwave digestion. We found that 6-32% of the total amount of arsenic in the soil was extractable by a one-step extraction with water in dependence on the type of arsenic species.     

Low pressure chromatographic separation of inorganic arsenic species using solid phase extraction cartridges

Routine water analysis of arsenic species requires simple, inexpensive, rapid and sensitive methods. To this end, we have developed two methods, which are based on the use of inexpensive solid phase extraction (SPE) cartridges as low pressure chromatographic columns for separation and hydride generation atomic absorption spectrometry (HGAAS) and hydride generation atomic fluorescence spectrometry (HGAFS) for detection of arsenic. Both anion exchange and reverse phase cartridges were successfully used to separate arsenite [As(III)] and arsenate [As(V)]. The composition, concentration, and pH of eluting buffers and the effect of flow rate were systematically investigated. Speciation of inorganic As(III) and As(V) were achieved within 1.5 min, with detection limits of 0.2 and 0.4 ng/ml, respectively. Both isocratic and step gradient elution techniques were suitable for the baseline resolution of As(III) and As(V) using anion exchange cartridges. Application of the methods to the speciation of As(III) and As(V) in untreated water, tap water, and bottled water samples were demonstrated. Results from the speciation of arsenic in a standard reference material water sample using these methods were in good agreement with the certified value and with inter-laboratory comparison results obtained using HPLC separation and inductively coupled plasma mass spectrometric detection (HPLC-ICPMS).