基于纳米MnO2-MWCNTs复合材料修饰的葡萄糖传感器

采用水热法制备了纳米MnO2,并用红外光谱,X射线衍射(XRD)和扫描电子显微镜(SEM)对其进行了表征。将碳纳米管和纳米MnO2分散在壳聚糖溶液中,用滴涂法固定到玻碳电极表面,制成修饰电极。利用计时电流法对该葡萄糖传感器的性能进行了研究,纳米MnO2-MWCNTs复合物对葡萄糖的氧化有明显的催化作用。在优化的条件下,葡萄糖在5.0×10-5～3.0×10-2mol/L浓度范围内,计时电流与浓度之间呈线性关系,检出限为1.5×10-5 mol/L(S/N=3)。对1.0×10-3 mol/L葡萄糖溶液平行测定8次的相对标准偏差(RSD)为2.1%。该传感器可成功用于葡萄糖注射液中葡萄糖的测定,回收率在96.4%～98.6%之间。     

碳纳米管负载铂-二氧化钌纳米颗粒用于葡萄糖传感器的研究

建立了多壁碳纳米管(MWNTs)负载铂二二氧化钌纳米颗粒的液相化学还原法.以Nafion为固定剂,将Pt-RuO2/MWNTs复合材料修饰于玻碳电极的表面,制备了一种无酶型葡萄糖传感器.实验表明:复合材料修饰的电极对葡萄糖响应电流明显,并且受抗坏血酸(AA)、多巴胺(DA)和尿酸(UA)的干扰小.本实验采用安培法测定葡萄糖,线性范围为2 0×10 3～1.0×10-2 mol/L(R～0.9965);灵敏度为119.26 μA cm-2(mmol/L)-1;检出限为1.25×10 -5 mol/L(信噪比为3);响应时间为4.8 s.PtRuO2/MWNTs修饰电极可作为性能良好的无酶型葡萄糖传感器.     

基于石墨烯/金纳米复合材料的无酶葡萄糖传感器

以抗坏血酸(AA)为还原剂,通过一步还原法将氧化石墨烯和氯金酸同时还原,合成石墨烯/金纳米复合材料,并直接滴涂于玻碳电极表面,构建基于石墨烯/金纳米复合材料的无酶葡萄糖传感器。采用循环伏安法和线性扫描伏安法对传感器的性质进行了研究。结果表明,该传感器能催化葡萄糖的氧化,且其氧化峰电流随葡萄糖浓度的增大而增大。测定葡萄糖的线性范围为0.01~2.5mmol/L(R=0.9964),检出限(S/N=3)为3μmol/L。对同一浓度的葡萄糖溶液平行测定8次,其电流强度的相对标准偏差(RSD)为2.6%。该传感器制作简单、稳定性好,将其用于葡萄糖注射液的检测,方法灵敏,其加标回收率为92.9%。     

石墨烯/纳米金复合材料的无酶葡萄糖生物传感器制备

以抗坏血酸(AA)为还原剂,通过同步还原法制得石墨烯/纳米金复合材料.采用电化学方法,构建了一种基于石墨烯/纳米金复合材料修饰电极的无酶葡萄糖生物传感器.实验中,通过伏安法考察了不同修饰电极在葡萄糖溶液中的电化学行为.同时,探讨了溶液中OH-离子强度、溶解氧、扫描初始电位及石墨烯与纳米金的比例对传感器响应特性的影响.在...     

RuO2·χH2O/MWNTs纳米复合物的超级电容特性研究

本文采用超声波技术合成了水合氧化钉/多壁碳纳米管纳米复合材料(Ru-MWNTs)前驱物,在150℃下热处理15 h后得到Ru-MWNTs.采用XRD及TEM对纳米复合材料进行表征,结果表明,水合氧化钌以无定型态比较均匀地沉积在MWNTs上.在1.0 mol·L-1H2SO4电解液中对Ru-MWNTs复合电极进行了电化学测试,循环伏安结果表明纳米复合物具有良好的电容性能,其比容量为100 F·g-1,是MWNTs的6倍(MWNTs的比容量为15.5 F·g-1);本文还采用交流阻抗方法来分析频率与电容的关系,比较分析了MWNTs和复合材料的孔结构,表明在MWNTs中复合少量的水合氧化钌可以提高电极材料的充、放电速度.     

基于NiMoO4纳米棒的无酶型葡萄糖电化学传感器

通过水热反应和退火处理制备NiMoO4纳米棒(NiMoO4 NRs),并以该材料构建了无酶型葡萄糖电化学传感器.扫描电镜和X射线衍射表征显示,合成的NiMoO4NRs为纳米带成束组装形成的纳米棒结构,且为α相的单斜晶体.电化学测试表明,NiMoO4NRs对葡萄糖的氧化具有良好的催化作用和灵敏的响应,其线性范围为0.2 ...     

RuO2·xH2O / MWNTs纳米复合物的超级电容特性研究

本文采用超声波技术合成了水合氧化钌/多壁碳纳米管纳米复合材料(Ru-MWNTs)前驱物，在150 ℃下热处理15 h后得到Ru-MWNTs。采用XRD及TEM对纳米复合材料进行表征，结果表明，水合氧化钌以无定型态比较均匀地沉积在MWNTs上。在1.0 mol·L^-1 H₂SO₄电解液中对Ru-MWNTs复合电极进行了电化学测试，循环伏安结果表明纳米复合物具有良好的电容性能，其比容量为100 F·g^-1，是MWNTs的6倍(MWNTs的比容量为15.5 F·g^-1)；本文还采用交流阻抗方法来分析频率与电容的关系，比较分析了MWNTs和复合材料的孔结构，表明在MWNTs中复合少量的水合氧化钌可以提高电极材料的充、放电速度。     

无酶葡萄糖传感器

葡萄糖传感器在几十年的发展中取得了重大进展,经历了三代基于酶葡萄糖传感器之后,现已进入第四代无酶葡萄糖传感器的发展阶段.本文从基于酶和无酶两类介绍了不同葡萄糖传感器的测试原理,综述了近年来纳米材料在无酶电化学葡萄糖传感器方面应用的主要研究进展,对不同类别纳米材料的制备方法以及所构建传感器的灵敏度、选择性、检测范围和稳定性等进行了评述,分析了制约无酶葡萄糖传感器商业化应用的主要原因.其中,贵金属纳米材料主要讨论了铂、金和钯;过渡金属纳米材料主要讨论了镍、铜以及其氧化物;双金属纳米材料主要讨论了合金和复合物;碳纳米材料主要讨论了单壁(多壁)碳纳米管和石墨烯.此外,本文也对无酶葡萄糖传感器的发展方向和趋势进行了展望.     

CuO Nanospheres Based Nonenzymatic Glucose Sensor

CuO nanospheres, synthesized by a simple one‐step hydrothermal method, have been applied to modify the glassy carbon (GC) electrode for sensitive nonenzymatic glucose detection. The CuO nanospheres modified electrode, compared to the Nafion modified GC electrode, exhibits an enhanced electrocatalytic property for direct glucose oxidation and shows a fast response and a high sensitivity for the amperometric detection of glucose. It has been determined that the dissolved oxygen is not involved in glucose oxidation and the high concentration of NaCl does not poison the electrode. These results also indicate that CuO nanospheres have great potential application in electrochemical detection.     

基于Al/Ni双氢氧化物纳米线无酶葡萄糖传感器的研究

本文采用多孔聚碳酸酯(PC)模板在加热条件下通过溶液渗透和共沉淀制得了Al/Ni双氢氧化物纳米线,并将其修饰到玻碳电极制成无酶葡萄糖传感器。考察了该传感器在不同扫描速度时的循环伏安行为,比较了裸玻碳电极、不同修饰电极对响应电流的影响。在优化条件下进行葡萄糖检测,线性范围为2.0×10-5～1.3×10-3 mol/L,检出限可以达到5.0×10-6 mol/L。该方法快捷、灵敏、分析性能好,操作简便。可将其应用于血清中葡萄糖含量的测定。     

Nonenzymatic Electrochemical Glucose Sensor Based on Novel Copper Film

Novel copper (Cu) film composed of pillar‐like structure was synthesized on indium‐doped tin oxide (ITO) substrate by electrodeposition in acetate bath with proline as additive for the first time and used to construct nonenzymatic glucose sensor. When applied to detect glucose, such prepared electrode showed low operating potential (0.4 V), high sensitivity (699.4499 µA mM⁻¹ cm⁻²), and fast response time (<3 s) compared with other Cu‐based electrodes. In addition, the prepared electrode also offered good anti‐interference ability to ascorbic acid, uric acid and acetaminophen. Present study provides new insights into the control of Cu film morphology for sensor fabrication.     

Nonenzymatic Electrochemical Glucose Sensor Based on Pt Nanoparticles/Mesoporous Carbon Matrix

A nonenzymatic amperometric sensor for sensitive and selective detection of glucose has been constructed by using highly dispersed Pt nanoparticles supported onto mesoporous carbons (MCs). The Pt nanoparticles/mesoporous carbons (Pt/MCs) composites modified electrode displayed high electrocatalytic activity towards the oxidation of glucose. At an applied potential of 0.1 V, the Pt/MCs electrode has a linear dependence (R=0.996) in the glucose concentration up to 7.5 mM with a sensitivity of 8.52 mA M^?1 cm^?2. The Pt/MCs electrode has also shown highly resistant toward poisoning by chloride ions and without interference from the oxidation of common interfering species.     

基于叶片状氧化铜纳米材料的无酶葡萄糖传感电极

将Nafion交联剂与纳米材料修饰至玻碳电极基底制备一种无酶葡萄糖传感器,通过循环伏安曲线、时间-电流曲线检测该电极电化学特性. 氧化铜纳米复合膜具有高比表面积和多活性点位的优点. 实验结果表明,氧化铜纳米电极对葡萄糖的检测线性响应范围0.01 ~ 0.3 mmol·L^-1,灵敏度1783.58 μA·L·mmol^-1·cm^-2,检测限0.80 μmol·L^-1 (S/N=3),稳定性较好,能抵抗抗坏血酸、多巴胺和尿酸干扰.     

Nonenzymatic electrochemical glucose sensor based on MnO2/MWNTs nanocomposite

In this communication, an amperometric glucose biosensor based on MnO₂/MWNTs electrode was reported. MnO₂ was homogeneously coated on vertically aligned MWNTs by electrodeposition. The MnO₂/MWNTs electrode displayed high electrocatalytic activity towards the oxidation of glucose in alkaline solution, showing about 0.30 V negative shift in peak potential with oxidation starting at ca. −0.20 V (vs. 3 M KCl–Ag/AgCl) as compared with bare MWNTs electrode. At an applied potential of +0.30 V, the MnO₂/MWNTs electrode gives a linear dependence (R = 0.995) in the glucose concentration up to 28 mM with a sensitivity of 33.19 μA mM⁻¹. Meanwhile, the MnO₂/MWNTs electrode is also highly resistant toward poisoning by chloride ions. In addition, interference from the oxidation of common interfering species such as ascorbic acid, dopamine, and uric acid is effectively avoided. The MnO₂/MWNTs electrode allows highly sensitive, low-potential, stable, and fast amperometric sensing of glucose, which is promising for the development of nonenzymatic glucose sensor.     

A Non‐Enzymatic Glucose Sensor Based on Ni/MnO2 Nanocomposite Modified Glassy Carbon Electrode

A novel flower like 3D nickel/manganese dioxide (Ni/MnO₂) nanocomposite was synthesized by a kind of simple electrochemical method and the formation mechanism of flower like structure was also researched. In addition, morphology and composition of the nanocomposite were characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), and X‐ray photoelectron spectroscopy (XPS). Then the Ni/MnO₂ nanocomposites were applied to fabricate electrochemical non‐enzymatic glucose sensor. The electrochemical investigation for the sensor indicated that it possessed an excellent electrocatalytic property for glucose, and could applied to the quantification of glucose with a linear range from 2.5×10^?7 to 3.5×10^?3 M, a sensitivity of 1.04 mA mM^?1 cm^?2, and a detection limit of 1×10^?7 M (S/N=3). The proposed sensor also presented attractive features such as interference‐free, and long‐term stability. The present study provided a general platform for the one‐step synthesis of nanomaterials with novel structure and can be extended to other optical, electronic and magnetic nanocompounds.     

Novel Nonenzymatic Hydrogen Peroxide Sensor Based on Ag/Cu2O Nanocomposites

The nanocomposites of Ag nanoparticles supported on Cu₂O were prepared and used for fabricating a novel nonenzymatic H₂O₂ sensor. The morphology and composition of the nanocomposites were characterized using the scanning electron microscope (SEM), transmission electron microscope (TEM), energy‐dispersive X‐ray spectrum (EDX) and X‐ray diffraction spectrum (XRD). The electrochemical investigations indicate that the sensor possesses an excellent performance toward H₂O₂. The linear range is estimated to be from 2.0 μM to 13.0 mM with a sensitivity of 88.9 μA mM^?1 cm^?2, a response time of 3 s and a low detection limit of 0.7 μM at a signal‐to‐noise ratio of 3. Additionally, the sensor exhibits good anti‐interference.     

电沉积Cu_2O在无酶葡萄糖传感器中的应用

采用电化学沉积法在玻碳电极表面制备了Cu_2O,利用X射线衍射(XRD)和扫描电镜(SEM)对Cu_2O的微观结构和表面形貌进行了表征,通过循环伏安法和计时电流法研究了Cu_2O对葡萄糖的电催化氧化性能。结果表明:该修饰电极对葡萄糖有良好催化作用,葡萄糖检测的线性范围为5.0μmol/L~6.23mmol/L,检测限(S/N=3)为0.4μmol/L。该传感器制备简单,稳定性和重复性好,可用于实际样品的测定。