Second-order optical nonlinearities from χ gratings induced by holographic all-optical poling

The paper presents the second-order optical nonlinearities from χ⁽²⁾ gratings induced by holographic all-optical poling for azobenzene polymer. Second harmonic (SH) signal along the directions with two different vectors was measured. One is strong SH signal diffracted in the same direction as 2ω writing beam with wave vector k_2ω and the other is weak SH signal diffracted in the direction of wave vector of 4k_ω - k_2ω + Δk where k_ω is wave vector of ω beam and Δk is the wave vector mismatch whose vector is parallel to k_ω. The latter signal was used as a tool to monitor the formation of holographic χ⁽²⁾ gratings in real-time because it has off-axis wave vector different from both k_ω and k_2ω. The increase of 2ω intensity on poling process led to the large increase of second-order optical nonlinearity. The real-time monitoring showed that it also gave the large relaxation of second-order optical nonlinearity on poling process. The increase of 2ω (532 nm) energy enhanced the increase of local heating, which led to easier alignment of azobenzene chromophore and also larger relaxation of aligned chromophore.     

Whence the Minkowski momentum?

Electromagnetic waves carry the Abraham momentum, whose density is given by p_EM = S(r,t) / c². Here S(r,t) = E(r,t) × H(r,t) is the Poynting vector at point r in space and instant t in time, E and H are the local electromagnetic fields, and c is the speed of light in vacuum. The above statement is true irrespective of whether the waves reside in vacuum or within a ponderable medium, which medium may or may not be homogeneous, isotropic, transparent, linear, magnetic, etc. When a light pulse enters an absorbing medium, the force experienced by the medium is only partly due to the absorbed Abraham momentum. This absorbed momentum, of course, is manifested as Lorentz force (while the pulse is being extinguished within the absorber), but not all the Lorentz force experienced by the medium is attributable to the absorbed Abraham momentum. We consider an absorptive/reflective medium having the complex refractive index n₂ + iκ₂, submerged in a transparent dielectric of refractive index n₁, through which light must travel to reach the absorber/reflector. Depending on the impedance-mismatch between the two media, which mismatch is dependent on n₁, n₂, κ₂, either more or less light will be coupled into the absorber/reflector. The dependence of this impedance-mismatch on n₁ is entirely responsible for the appearance of the Minkowski momentum in certain radiation pressure experiments that involve submerged objects.     

Energy, momentum, and force in classical electrodynamics: Application to negative-index media

The classical theory of electromagnetism is based on Maxwell's macroscopic equations, an energy postulate, a momentum postulate, and a generalized form of the Lorentz law of force. These seven postulates constitute the foundation of a complete and consistent theory, thus eliminating the need for physical models of polarization P and magnetization M — these being the distinguishing features of Maxwell's macroscopic equations. In the proposed formulation, P(r, t) and M(r, t) are arbitrary functions of space and time, their physical properties being embedded in the seven postulates of the theory. The postulates are self-consistent, comply with special relativity, and satisfy the laws of conservation of energy, linear momentum, and angular momentum. The Abraham momentum density p_EM(r,t) = E(r,t) × H(r,t) / c² emerges as the universal electromagnetic momentum that does not depend on whether the field is propagating or evanescent, and whether or not the host media are homogeneous, transparent, isotropic, linear, dispersive, magnetic, hysteretic, negative-index, etc. Any variation with time of the total electromagnetic momentum of a closed system results in a force exerted on the material media within the system in accordance with the generalized Lorentz law.     

Nonlinear optical absorption and fluorescence of phosphine-substituted bithiophenes in the violet-blue spectral region

The nonlinear optical absorptions of two 5,5′-bis(diphenylphosphino)-2,2′-bithiophene derivatives, Ph₂(X)P(C₄H₂S)₂P(X)Ph₂ (X = O, 1; S, 2), have been investigated by direct transmission measurement with both picosecond and nanosecond laser pulses from 420 nm to 480 nm. Saturated dichloromethane solutions of 1 and 2 exhibit strong nonlinear optical absorptions in this violet-blue spectral region with that of 2 being stronger at all wavelengths. In the picosecond regime, at 420 nm, the transmittance rapidly falls to 50% when the incident fluence is 0.22 J/cm² for 1 and 0.11 J/cm² for 2. Two-photon absorption appears to be the primary mechanism for this nonlinear absorption. The two-photon absorption coefficients β for 1 (2.1 cm/GW) and 2 (4.4 cm/GM) were obtained by fitting the measurement of transmittance as the function of incident beam intensity at 420 nm. These β values are comparable with some of the best results obtained for organic materials in the green, red and infrared spectral region. Both compounds also show fluorescence with an emission peak at 390 nm for 1 and 400 nm for 2. The fluorescence of 1 is considerably stronger than is that of 2. The combination of the wide band gap and strong fluorescence emission of 1 makes it a promising candidate as a host material for blue organic light emitting diodes.     

Sonochemical syntheses and characterization of nano-sized lead(II) coordination polymer with ligand 1H-1,2,4-triazole-3-carboxylate

Nanoparticles of a two-dimensional coordination polymer, {[Pb(L)(μ_1,1-NCS)(H₂O)]}_n (1), (L⁻ = 1H-1,2,4-triazole-3-carboxylate), have been synthesized by a sonochemical process and characterized by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analyses. The thermal stability of compound 1 both its bulk and nano-size has been studied by thermal gravimetric (TG) and differential thermal (DTA) analyses and compared each other. Concentration of initial reagents effects and the role of power ultrasound irradiation on size and morphology of nano-structured compound 1, have been studied. Calcination of the single crystals and nano-sized compound 1 at 400 °C under air atmosphere yields mixture of PbS and Pb₂(SO₄)O nanoparticles. Results show that the size and morphology of the PbS and Pb₂(SO₄)O nanoparticles are dependent upon the particles size of compound 1. A decrease in the particles size of compound 1 leads to a decrease in the particles size of the PbS and Pb₂(SO₄)O.     

TOWARDS DEEP AND SIMPLE UNDERSTANDING OF THE TRANSCENDENTAL EIGENPROBLEM OF STRUCTURAL VIBRATIONS

When using exact methods for undamped free vibration problems the generalized linear eigenvalue problem (K−ω²M) D=0 of approximate methods, e.g., finite elements, is replaced by the transcendental eigenvalue problem K (ω) D=0. Here ω is the circular frequency; D is the displacement amplitude vector; M and K are the mass and static stiffness matrices; and K (ω) is the dynamic stiffness matrix, with coefficients which include trigonometric and hyperbolic functions involving ω and mass because elements (for example, bars or beams) are analyzed exactly by solving their governing differential equations. The natural frequencies of this transcendental eigenvalue problem are generally found by the Wittrick-Williams algorithm which gives the number of natural frequencies below ω_t, a trial value of ω, as ∑J_m+s{K (ω_t)} wheres {} denotes the readily computed sign count property of K (ω) and the summation is over the clamped-clamped natural frequencies of all elements of the structure. Understanding the alternative solution forms of the transcendental eigenvalue problem is important both to accelerate convergence to natural frequencies, e.g., by plotting ∣K (ω)∣, and to improve the mode calculations, which lack the complete reliability of natural frequencies obtained by using the Wittrick-Williams algorithm. The three solution forms are: ∣K (ω)∣=0; D=0 with ∣K (ω)∣→∞; and ∣K (ω)∣≠0 with D≠0. The literature covers the first two forms thoroughly but the third form has been almost totally ignored. Therefore, it is now examined thoroughly, principally by analytical studies of simple bar structures and also by confirmatory numerical results for a rigidly jointed plane frame. Although structures are unlikely to have exactly the properties giving this form, it needs to be understood, particularly because ill-conditioning can occur for structures approximating those for which it occurs.     

A theoretical and numerical consideration of the longitudinal and transverse relaxations in the rotating frame

We previously derived a simple equation for solving time-dependent Bloch equations by a matrix operation. The purpose of this study was to present a theoretical and numerical consideration of the longitudinal (R_1ρ = 1/T_1ρ) and transverse relaxation rates in the rotating frame (R_2ρ = 1/T_2ρ), based on this method. First, we derived an equation describing the time evolution of the magnetization vector (M(t)) by expanding the matrix exponential into the eigenvalues and the corresponding eigenvectors using diagonalization. Second, we obtained the longitudinal magnetization vector in the rotating frame (M_1ρ(t)) by taking the inner product of M(t) and the eigenvector with the smallest eigenvalue in modulus, and then we obtained the transverse magnetization vector in the rotating frame (M_2ρ(t)) by subtracting M_1ρ(t) from M(t). For comparison, we also computed the spin-locked magnetization vector. We derived the exact solutions for R_1ρ and R_2ρ from the eigenvalues, and compared them with those obtained numerically from M_1ρ(t) and M_2ρ(t), respectively. There was excellent agreement between them. From the exact solutions for R_1ρ and R_2ρ, R_2ρ was found to be given by R_2ρ = (2R₂ + R₁)/2 − R_1ρ/2, where R₁ and R₂ denote the conventional longitudinal and transverse relaxation rates, respectively. We also derived M_1ρ(t) and M_2ρ(t) for bulk water protons, in which the effect of chemical exchange was taken into account using a 2-pool chemical exchange model, and we compared the R_1ρ and R_2ρ values obtained from the eigenvalues and those obtained numerically from M_1ρ(t) and M_2ρ(t). There was also excellent agreement between them. In conclusion, this study will be useful for better understanding of the longitudinal and transverse relaxations in the rotating frame and for analyzing the contrast mechanisms in T_1ρ- and T_2ρ-weighted MRI.     

Reversible photomagnetism in a cobalt layered compound coupled with photochromic diarylethene

Photomagnetism is one of the most attractive topics in recent research on molecular solids. In order to produce a photo-controllable magnet, we have synthesized a novel organic-inorganic hybrid system coupled with a photochromic diarylethene anion, 2,2′-dimethyl-3,3′-(perfluorocyclopentene-1,2-diyl)bis(benzo[b]thiophene-6-sulfonate) (1a) and cobalt LDHs (layered double hydroxides). Based on the elemental analysis, the title compound, which was synthesized by the anion exchange reaction between Co₂(OH)₃(CH₃COO)·H₂O (2) and 1a, has the chemical composition, Co₄(OH)₇(1a)_0.5·3H₂O (3). Powder X-ray diffraction analysis revealed the interlayer distance of c=27.8 Å. The magnetic susceptibility measurements elucidated the ferromagnetic intra- and inter-layer interactions and the Curie temperature of T_c=9 K. By UV irradiation of 313 nm, 3 shows the photo-isomerization of diarylethene anion from the open form to the closed one in solid state, which leads to the decreases in the coercive field and the remnant magnetization. Furthermore, the photo-excited state is returned to the initial state (open form) almost reversibly by visible irradiation of 550 nm.     

Nature of electric and magnetic dipoles gleaned from the Poynting theorem and the Lorentz force law of classical electrodynamics

Starting with the most general form of Maxwell's macroscopic equations in which the free charge and free current densities, ρ_free and J_free, as well as the densities of polarization and magnetization, P and M, are arbitrary functions of space and time, we compare and contrast two versions of the Poynting vector, namely, S = μ_o^− 1E × B and S = E × H. Here E is the electric field, H is the magnetic field, B is the magnetic induction, and μ_o is the permeability of free space. We argue that the identification of one or the other of these Poynting vectors with the rate of flow of electromagnetic energy is intimately tied to the nature of magnetic dipoles and the way in which these dipoles exchange energy with the electromagnetic field. In addition, the manifest nature of both electric and magnetic dipoles in their interactions with the electromagnetic field has consequences for the Lorentz law of force. If the conventional identification of magnetic dipoles with Amperian current loops is extended beyond Maxwell's macroscopic equations to the domain where energy, force, torque, momentum, and angular momentum are active participants, it will be shown that “hidden energy” and “hidden momentum” become inescapable consequences of such identification with Amperian current loops. Hidden energy and hidden momentum can be avoided, however, if we adopt S = E × H as the true Poynting vector, and also accept a generalized version of the Lorentz force law. We conclude that the identification of magnetic dipoles with Amperian current loops, while certainly acceptable within the confines of Maxwell's macroscopic equations, is inadequate and leads to complications when considering energy, force, torque, momentum, and angular momentum in electromagnetic systems that involve the interaction of fields and matter.     

Correlation between adsorption and thermal properties of lanthanide(III) dinicotinates

Structural and thermal properties of the two isostructural lanthanide metal-organic frameworks: [Er₂(pdc)₃(dmf)₂]·dmf (1) and [Tm₂(pdc)₃(dmf)₂]·dmf (2) where pdc = C₅H₃N(COO)₂²⁻ and dmf = N,N′-dimethylformamide, have been investigated. They are characterized by the BET surface area of 302 and 101 m²/g for 1 and 2, respectively. This paper deals with the influence of activation conditions on sorption properties of the investigated complexes. Thermal investigations of as-made and activated complexes point to their entirely different thermal decompositions.     

Synthesis and luminescent properties of two Schiff-base boron complexes

Schiff bases N,N′-o-phenylenebis (salicylideneimine) (H₂L¹), N,N′-p-phenylenebis (salicylideneimine) (H₂L²) and their corresponding boron complexes (BF₂)₂L¹, (BF₂)₂L² were synthesized, respectively. The two boron complexes have been characterized by ¹H NMR, mass spectrometry and elemental analysis, while the luminescent properties of them were investigated with UV-VIS spectroscopy and photoluminescence spectroscopy. Then the three-layer devices [ITO/NPB (60 nm)/(BF₂)₂L¹ (50 nm)/Alq3 (20 nm)/LiF (1 nm)/Al (200 nm)] (device I) and [ITO/NPB (60 nm)/(BF₂)₂L² (50 nm)/Alq3 (20 nm)/LiF (1 nm)/Al (200 nm)] (device II) were fabricated by vacuum deposition. These two devices both exhibited blue green emission at 500 nm, but showed different luminances and efficiencies.     

Spectroscopic and thermodynamic features of conical bubble luminescence

The influence on luminescence from conical bubble collapse (CBL) with varying Ar gas content while perturbing the liquid 1,2-Propanediol (PD) has been investigated. The temporal, spatial, and spectral features were analysed with regards to the dynamics of collapse and liquid degradation. Sulphuric acid and sodium chloride were added to disturb the liquid. The following three cases were studied: PD/Ar, (I), (PD + H₂SO₄)/Ar, (II), and (PD + H₂SO₄ + NaCl)/Ar, (III). The intensities of those cases decrease as III > II > I. Temporally, single and multiple light emissions were found to occur. The pulse shape exhibited a large variety of profiles with a main maximum and up to two local maxima around the main maximum. These local maxima resembled those generated by laser cavitation. Spatially, no radial symmetry was detected in the light emissions. Spectrally, the Swan, CH and CN lines were observed at low volumes of gas and driving pressure. The OH radical and OH-Ar bands, as well as the Na and K lines, consistently appeared superimposed on an underlying continuum that almost disappeared in (III). The Na line was observed with two satellite diffuse bands representing Na-Ar complexes in (I) and (II), whereas in (III), only the line of sodium could be seen. Weak and diffuse emission lines from the Ar atom in the near-IR region were observed in (I) and (II).The proposed mechanism of bright CBL was based on the energy transfer from electron-excited homolytic cleavage products to the chromophore molecules generated during the collapse-rebound time line (∼8200 K and ∼1 ms of collapse time from model), which had accumulated inside the liquid and remained on the walls of cavity during the repetition of the collapse. A general mechanism for the bright CBL is broached.     

Viscous mhd solutions with no transfer of energy through the spectrum

Exact space periodic solutions to the viscous magnetohydrodynamics equations with arbitrary vector periods p₁, p₂, p₃ are derived. A complete classification of the p_j-periodic MHD solutions with pairwise noninteracting Fourier modes is obtained. The solutions have no transfer of energy through the spectrum and are smooth for all values of the time variable t ≥ 0.     

Effect of C and SiC additions into in situ or mechanically alloyed MgB2 deformed in Ti sheath

Effect of 3.4 wt.% C and 5 wt.% SiC doping into the standard in situ (IN) process and mechanically alloyed (MA) MgB₂ was studied. Powders of IN and MA process were carried out in air and in argon filled glove box, respectively. Wire samples were prepared by two-axial rolling deformation of IN and MA powders inside the Ti tube. Titanium as sheath material allows to use higher sintering temperatures, we used 700 °C and 800 °C for 30 min in Argon. Critical current densities (J_c) were measured at variable temperatures 4.2 K, 10 K, 15 K and 20 K in the external magnetic fields ranging to 15 T. Critical temperatures, upper critical fields and irreversibility fields of IN and MA with SiC and C additions are compared and discussed. The highest transport properties were observed for wires with MA SiC doped MgB₂ in the whole scale of temperatures 4.2–20 K. Upper critical field was rapidly enhanced in the case of carbon doped MA samples at 4.2 K. MA samples have shown decreased J_c values for higher temperatures (15 K, 20 K), in some case even worse than for the not doped reference IN sample. Carbon substitution and grain connectivity of analyzed samples are compared and discussed. Presented results show that for 20 K applications some new ways (additions) have to be found for increasing the J_c substantially.     

Synthesis,structures and near-infrared luminescence properties of Ho and Yb coordination complexes

Four Ln³⁺ coordination complexes with the formulas [Ln(p-toluylate)₂(Ac)(H₂O)]_n (Ln=Ho 1, Yb 2) and {[Ln₂(OOCCH₂CH₂COO)₃(H₂O)₄]·6H₂O}_n (Ln=Ho 3, Yb 4) were synthesized hydrothermally. Their structures were determined by single-crystal X-ray diffraction. Complexes 1 and 2 are isomorphic and form infinite 2D network structures comprising p-toluylate and acetate (Ac^–) moieties. Complexes 3 and 4 are also isomorphic and possess infinite 2D structures in which succinate acts as bridging ligands that are connected to a 3D hydrogen bonding network by O–H…O hydrogen bonds. Solid-state IR and UV-Vis-NIR spectra, excitation and emission spectra were determined for the four complexes at room temperature. Complexes 1 and 2 exhibit characteristic NIR emission bands of Ln³⁺ ions but these are shifted and split relative to the theoretical positions. This is also evident for their UV-Vis-NIR spectra. The influence of ligands on enhancing the NIR luminescence of Ln³⁺ ions in complexes is discussed.     

The nature of anharmonicity and anomalous piezoelectric properties of ferroelectric SbSBr crystal

The contribution of soft mode at Sb atom's sites, to the temperature dependences of Sb atom's equilibrium position's difference Δz(T) has been studied theoretically, when SbSBr crystal is deformed along a(x), b(y) and c(z)-axis in paraelectric phase and is deformed along c(z)-axis in ferroelectric phase. The largest change of Δz₃₃(T) occurs in the ferroelectric phase near the phase transition temperature in the range from 16 K to 21 K. The temperature dependence of Sb atom's equilibrium position's displacements Δz₃₃ is very similar to the temperature dependence of experimental piezoelectric modulus, when SbSBr crystal is deformed in the direction of c(z)-axis in ferroelectric phase.     

Electron-phonon interaction in magnesium: From the monolayer to the Mg(0 0 0 1) surface

We report ab initio study of the electron-phonon coupling in a free standing magnesium monolayer and at the Mg(0 0 0 1) surface. The calculations were carried out using a linear-response approach in the plane-wave pseudopotential representation. Eliashberg spectral function α²F(ω) averaged over electron states at the Fermi surface is presented for the monolayer while for the Mg(0 0 0 1) surface, we compute the electron-phonon spectral function α²F_k,i(ω) for surface states at the and points.     

Synthesis, characterization and optical limiting effect of nickel complexes of multi-sulfur 1,2-dithiolene

Three nickel complexes with a new multi-sulfur 1,2-dithiolene ligand, (n-Bu₄N)[Ni(cddt)₂] 1, (Ph₄P)[Ni(cddt)₂] 2 and [Ni(cddt)₂] 3 (cddt=4a, 6, 7, 7a-5H-cyclopenta[b]-1,4-dithiin-2,3-dithiolate), have been synthesized and characterized by electrochemical measurements, IR, EPR and UV-Vis-NIR spectroscopies. The crystal structure of complex 2 is determined. Their optical nonlinearities are measured by the Z-scan technique with an 8 ns pulsed laser at 532 nm and all exhibit NLO absorptive abilities. Complexes 1 and 2 both exhibit effective self-defocusing performance (n₂=−5.81×10⁻¹⁰ esu for 1 and −4.51×10⁻¹⁰ esu for 2). The optical limiting (OL) effects were observed with nanosecond and picosecond laser pulses. The OL capability of complex 3 is superior to C₆₀ at the same experimental condition in ns measurements.     

Photoluminescent properties of heteroleptic cyclometalated platinum(II) complexes bearing 1,3-bis(3,4-dibutoxyphenyl)propane-1,3-dionate as an ancillary ligand

A new series of heteroleptic cyclometalated platinum(II) complexes Pt-1a-f was synthesized, employing 2-arylpyridine (or 1-arylisoquinoline) (HC^∧N-1) and 1,3-bis(3,4-dibutoxyphenyl)propane-1,3-dione (HO^∧O-1) for cyclometalation and as ancillary ligands, respectively, and photoluminescent properties were investigated. Focusing on red-shifted phosphorescence, C^∧N ligands containing π-extended aromatics and electron-rich heterocycles were examined. All obtained complexes exhibited photoluminescence at ambient temperature, and the emission maxima ranged from green (λ_PL=518 nm) to far red (λ_PL=708 nm). The large Stokes shifts of more than 100 nm and sub-microsecond or microsecond emission lifetimes revealed that these complexes are phosphorescent emissive. The quantum yield of Pt-1 ranged from 0.02 to 0.59 at ambient temperature and decreased as the emission maximum was red-shifted. In comparison with the reference platinum(II) complexes, Pt-2 bearing an aliphatic ancillary ligand, such as 2,2,6,6-tetramethylheptane-3,5-dionate (O^∧O-2), the ligand O^∧O-1 did not significantly affect the photoluminescence emission maxima, indicating that the energy gap between the singlet ground state and the triplet level was predominantly dependent on the C^∧N ligand.     

χ measurement and optical limiting studies of urea picrate

The molecular charge complex urea picrate (UP) was synthesized and its third order nonlinear optical properties have been investigated using a single beam Z-scan technique with nanosecond laser pulses at 532 nm. Open aperture data of the compound indicates two photon absorption at this wavelength. The nonlinear refractive index n₂, nonlinear absorption coefficient β, magnitude of effective third order susceptibility χ⁽³⁾, the second order hyperpolarizability γ_h and the coupling factor ρ have been estimated. The experimentally determined values of β, n₂, Re χ⁽³⁾ and Im χ⁽³⁾, γ_h and ρ of the compound UP are 2.146 cm/GW, −1.258×10⁻¹¹ esu, −1.347×10⁻¹³ esu, 0.377×10⁻¹³ esu, 0.69×10⁻³² esu and 0.28, respectively. The compound exhibits good optical limiting at 532 nm with the limiting threshold of 80 μJ/pulse. Our studies suggest that compound UP is a potential candidate for optical device applications such as optical limiters.