苯乙烯-异戊二烯两嵌段共聚物溶液的dn/dc和紫外吸收光谱

本文研究了苯乙烯-异戊二烯两嵌段共聚物在CHCl_3中的折光指数浓度增量(dn/dc)和紫外吸收光谱。嵌段共聚物dn/dc具有很好的加和性,可以测定嵌段共聚物的组成。紫外吸收光谱的结果表明,除低苯乙烯含量的样品外,其它嵌段共聚物都显示明显的紫外增色性(UV hyperchromism)。因此UV和UV-RI双检测GPC不会得到可靠的嵌段共聚物组成数据。这种增色现象与其特征的紫外吸收谱图紧密关联     

嵌段—接枝共聚物SPEG与PS（OH）之间的氢键络合导致胶束化的研究

利用原子转移自由基聚合反应合成了以聚苯乙烯－ｂ－聚（乙烯－ｃｏ－丙烯）（ＳＥＰ）为主链、无规分布且数目可控的聚甲基丙烯酸乙酯（ＰＥＭＡ）为支链的嵌段接枝共聚物ＳＰＥＧ,发现在甲苯中因支链ＰＥＭＡ与聚（苯乙烯－ｃｏ－对六氟丙基－α－甲基苯乙烯）「简称ＰＳ（ＯＨ）」的氢键络合作用和ＥＰ嵌段的溶解作用导致了聚集体的胶束化,研究了胶束的尺寸及其分布对ＰＳ（ＯＨ）中羟基含量和共混物组成的依赖性。     

丙烯酰胺-苯乙烯双亲嵌段共聚物水溶液的表面活性及增溶性

在微乳液介质中制备了系列的丙烯酰胺 (AM)与苯乙烯 (St)的双亲嵌段共聚物 (PAM b PSt) ,用紫外分光光度法测定了共聚物的组成 ,用乌氏粘度计测定了共聚物的特性粘数 [η],并用其相对表征共聚物的分子量大小 .重点研究了双亲嵌段共聚物 (PAM b PSt)疏水链段在水溶液中的缔合行为、共聚物的表面活性及其对有机物的增溶性能 ,考察了共聚物分子组成 (疏水链段含量 )与分子量对其表面活性与增溶性能的影响规律 .研究结果表明 ,由于疏水链段的憎水性 ,PAM b PSt的分子链在水溶液表面会形成表面吸附 ,从而降低水溶液的表面张力 ;而在水溶液中 ,在疏水相互作用下 ,PAM b PSt分子链中的苯乙烯疏水链段会形成分子间或分子内的胶束 ,烃类有机物可增溶其中 ;疏水链段含量越大 ,分子量越小 ,PAM b PSt的表面活性与增溶性能越强     

苯乙烯／甲基丙烯酸和苯乙烯／甲基丙烯酸（β—羟丙酯）嵌段共聚物的表面动

通过测定表面动态接触角研究了两亲性的苯乙烯／甲基丙烯酸嵌段共聚物（PS－b－PMAA）和苯乙烯／甲基丙烯酸（β-羟丙酯）嵌段共聚物（PA－b-PHPMA）的表面动态行为及温度、嵌段长度比等因素对其值的影响，讨论了聚合物表面当接触介质改变时链段或基团的再取向行为和表面性质。     

用SN型催化剂合成苯乙烯一丙烯嵌段共聚物的研究──Ⅰ．聚合条件对共聚合反应的影响

用稀土化合物改性的钛系载体催化剂（ＳＮ催化剂）进行苯乙烯和丙烯顺序嵌段共聚合（Ｓｅｑｕｅｎｔｉａｌｂｌｏｃｋｃｏｐｏｌｙｍｅｒｉｚａｔｉｏｎ）的研究．考察了苯乙烯预聚时间、单体比、外加给电子体（ＥＢ）、烷基铝浓度、催化剂浓度和聚合温度等条件对共聚合的影响．发现外加酯（ＥＢ）降低了共聚合反应催化活性，在ＥＢ／Ｔｉ摩尔比为５范围内，外酯有助于提高嵌段共聚物（ｉＰＳ—ｂ—ｉＰＰ）中ＰＳ段和ＰＰ段的等规度及增加苯乙烯链节含量．ＳＮ型催化剂对苯乙烯一丙烯嵌段共聚合有较高的催化活性，催化效率在１００ｇ聚合物／ｇ－Ｔｉ以上．共聚物通过溶剂革取分级除去均聚物后，所得嵌段共聚物中苯乙烯链节含量可在１５～８５ｍｏｌ％之间调节．其结构表征续见第ＩＩ报．     

苯乙烯—丙烯嵌段共聚物等温结晶动力不宾研究

用ＤＳＣ法研究苯乙烯－丙烯嵌段共聚物（ｉＰＳ－ｂ－ｉＰＰ）的等温结晶动力学，结果表明，在所选择的结晶温度（１２７－１３２℃）范围内，共聚物很好地符合Ａｖｒａｍｉ动力学方程；共聚物结晶温度，结晶速率，结晶成和生长方式都与共聚物结构和组成比在关，随着嵌段共的中ｉＰＳ段含量的增加，结晶速率和Ａｖｒａｍｉ指数（ｎ）明显降低。     

嵌段共聚物微胶束行为的研究Ⅲ．动态激光光散射法研究聚（苯乙烯－异戊二烯）星形嵌段共聚物在选择性溶剂中微胶束的形成过程

采用动态激光光散射研究聚（苯乙烯－异成二烯）（ＰＳ—ＰＩ）星形嵌段共聚物在选择性溶剂二氧六环／甲醇混合体系中微胶束的形成过程。讨论了温度、混合溶剂的组成、星形嵌段共聚物的臂数及组成对微胶束形成的影响。验证了临界接触浓度的存在。并就不同结构的星形嵌段共聚物形成微胶束的形成进行了讨论。     

微乳液法制备水溶性双亲丙烯酰胺-苯乙烯嵌段共聚物

分别以十二烷基硫酸钠 (SDS)、壬基酚聚氧乙烯醚 (OP 10 )为表面活性剂 ,丙烯酰胺 (AM)的水溶液为连续相 ,苯乙烯 (St)为分散相 ,构成微乳液共聚合体系 ,合成了水溶性双亲嵌段共聚物 ,并通过荧光探针技术、差示扫描量热 (DSC)测试及流变性能的测定表征了共聚物的嵌段性结构 ,用红外光谱 (FTIR)及紫外光谱 (UV)分析了共聚物的化学组成     

两性星形嵌段共聚物的结晶及络合性质

研究了聚苯乙烯(S)-聚环氧乙烷(E)星形嵌段共聚物的结晶及络合性质.结果表明,结晶度随E含量及分子量增大而增大.共聚物熔融后在20℃淬火比0℃淬火的结晶规整,氯仿溶液浇铸的样品比乙苯浇铸的规整.共聚物在甲苯溶液中呈现特殊的介晶现象.紫外吸收光谱表明,它能与苦味酸碱金属盐络合,使不溶于氯仿及甲苯的钾盐或钠盐进入溶液.     

苯乙烯－丁二烯－苯乙烯工嵌段共聚物／聚（苯乙烯－甲基丙烯酸盐）热塑性IPN中离子聚集结构的研究

苯乙烯－丁二烯－苯乙烯工嵌段共聚物／聚（苯乙烯－甲基丙烯酸盐）热塑性ＩＰＮ中离子聚集结构的研究韦雨春，袁惠根，潘祖仁（浙江大学化工系杭州３１００２７）关键词互穿聚合物网络，离子聚集，远红外光谱，Ｘ－光散射以苯乙烯－丁二烯－苯乙烯三嵌段共聚物（ＳＢＳ）...     

Volumetric Properties of Ternary–Pseudobinary Mixtures [(Styrene + Ethyl Acetate or Benzene) + (<Emphasis Type="Italic">N</Emphasis>-Methyl-2-pyrrolidone + Ethyl Acetate or Benzene)]

The densities of the ternary-pseudobinary mixtures [(styrene + ethyl acetate or benzene) + (N-methyl-2-pyrrolidone + ethyl acetate or benzene)], formed by adding the third component (ethyl acetate or benzene) to the binary system (styrene + ethyl acetate), have been measured as a function of composition by means of a vibrating-tube densimeter at atmospheric pressure at 298.15 K. The excess molar volumes V _m ^E were calculated from the densities and correlated using the Redlich–Kister equation to estimate the coefficients and standard errors. The experimental and calculated quantities are used to discuss the mixing behavior of the components. The results show that the third component, ethyl acetate or benzene, have quite different influences on the interaction between styrene and N-methyl-2-pyrrolidone.     

目标转换因子分析与库检索相结合用于红外混合体系定性分析

将库检索与目标转换因子分析相结合利用抽象浓度的分布信息确定可能解域，其最大可能解即为体系包含的物种。可能解域的确定大大减少了计算量，应用于严重重叠的甲苯和乙苯二组份和苯，甲苯及乙苯三组份混合体系，结果令人满意。     

Kinetics of Free Radical Copolymerization. V. Copolymerization of Ethyl Acrylate with Styrene. Composition of Copolymers

The composition of copolymers formed at 50°C in ethyl acrylate/ styrene/azo-bis-isobutyronitrile/benzene systems of different composition was investigated. The experimental composition data (based on the elementary analysis of copolymers) were evaluated by the η-ζ transformation method. Finite monomer conversions were taken into account. The classical composition equation was found to describe the system under investigation. The reactivity ratios are p ₁ = 0.152 ± 0.006; p ₂ = 0.787 ± 0.023. The free radical copolymerization of ethyl acrylate and styrene has been investigated in benzene solution at 50°C. Our results on the initiation kinetics were disclosed in our recent publication [1]. Now we are reporting on our studies concerning the composition of ethyl acrylate/styrene copolymers.     

环状三过氧烷引发剂热分解和引发苯乙烯聚合

用气相色谱质谱联用仪 (GC MS) ,分析新型环状三过氧基团引发剂 (3,6 ,9 triethyl 3,6 ,9 trimethyl 1,4 ,7 triperoxonane ,简称TETMTPA)在乙苯和苯中的分解产物 .根据产物的分子结构 ,提出了涉及氧氧、碳碳和碳氧断键的分解机理 ;考察该引发剂引发苯乙烯本体聚合的速率和分子量 ,并与单过氧基团的过氧化二特丁基引发和热引发进行比较 ,发现用TETMTPA可以使分子量增加 ,对形成高分子量聚苯乙烯的原因作了解释 ;通过差示扫描量热仪 (DSC)和核磁共振仪 (NMR)聚合产物进行分析 ,验证了所提出的TETMTPA引发机理     

气液色谱法研究聚合物/溶剂体系气液平衡

 用气液色谱法测定了聚二甲基硅氧烷（PDMS）／溶剂、聚甲基丙烯酸甲酯（PMMA）／溶剂体系在不同温度下以质量分数表示的无限稀溶剂活度系数和Flory－Huggins相互作用参数。应用UNIFAC和UNIFAC－FV模型对PDMS／溶剂、PMMA／溶剂体系中以质量分数表示的无限稀溶剂活度系数进行了估算。结果表明,用这两个模型预测PDMS／溶剂、PMMA／溶剂体系中的无限稀溶剂活度系数有待修正或采用其它模型进行估算。     

Polymerization initiated by the charge-transfer complex of styrene and maleic anhydride in the presence of cumene and of cumene and liquid sulfur dioxide

A polymerization was induced with a charge-transfer type of complex consisting of styrene and maleic anhydride in the presence a solvent such as ethyl benzene, cumene, or p-cymene. No polymer was obtained either when the solvent was missing from the polymerization system or when benzene, toluene, or xylene, which are relatively stable to hydrogen abstraction, was added to the polymerization system. An effective initiation, however, took place when cumene or p-cymene, each of which has a labile hydrogen on an α carbon, was added. On the basis of elementary analysis and infrared spectroscopy the formation of copolymer containing substantially equimolar amounts of styrene and maleic anhydride was ascertained. This polymerization was inhibited by the addition of DPPH, suggesting that the system styrene–maleic anhydride–cumene functions much as a conventional free-radical initiator. On the other hand, when a solution of cumene and liquid sulfur dioxide was added to the polymerization system, polystyrene was obtained. This polymerization was inhibited by the addition of a base such as dimethyl-formamide or dimethyl sulfoxide, indicating that the polymerization proceeds through carbonium ion intermediates. The addition of ethyl benzene or of p-cymene brought about the same result as cumene. It is conceivable that the polymerization is induced by the abstraction of hydrogen attached at the α position of cumene by means of the charge-transfer complex of styrene and maleic anhydride.     

NaBr/KY催化剂在甲苯氧化甲基化反应中的稳定性

考察了NaBr/KY催化剂的甲苯氧化甲基化(OMT)反应的稳定性，经过50 h的OMT反应结果表明，在反应初期，甲苯转化率、总C8选择性均有不同程度的下降，之后趋于稳定.在总C8产物中，苯乙烯的选择性随着反应的进行呈下降趋势，而乙苯的选择性与苯乙烯相比呈相反的变化趋势.此外，利用XRD、骨架IR、XPS对反应前后的催化剂结构进行了研究，发现催化剂经过50 h的OMT反应，分子筛的结构遭到了部分破坏，但其基本骨架仍保留.     

Polymerizable tautomers. VI. Solvent effects on polymerization and copolymerization of ethyl 4-methyl-3-oxo-4-pentenoate

The radical polymerization of ethyl 4-methyl-3-oxo-4-pentenoate (EMAA) was investigated at 60°C in benzene and acetonitrile. In both solvents, the kinetic results disagreed with the conventional model of radical polymerization. A remarkable solvent effect on monomer reactivity ratio was observed for the copolymerization of EMAA and styrene. Regression analysis of the monomer reactivity ratio with the solvatochromic parameters gives a good linear relationship, taking into account polarity and hydrogen-bond donating acidity of the solvent as the major factors.     

带有酰胺侧基的中空手性高分子微球的合成及其分离性能

合成了带有手性基团的多孔高分子微球, 并将其作为高效液相色谱手性固定相用于分离制备盐酸贝那普利的一个重要中间体(R)-α-羟基苯丁酸乙酯.     

顶空直接进样气相色谱法测定黏胶剂中的苯系物

目的建立检测黏胶剂中苯系物的方法。方法用顶空直接进样气相色谱法测定黏胶剂中的苯、甲苯、乙苯、对二甲苯、间二甲苯、邻二甲苯以及苯乙烯7种组分,对气相色谱柱、顶空加热温度以及顶空提取时间进行了讨论。结果对苯乙烯等7种被测组分的检测限均小于5mg/kg,7种组分在毛细管柱中能够很好的分离,回收率范围为81%～94%,RSD为5%～10%,具有操作简单、快速等特点。结论能够满足对黏胶剂中苯系物测定的分析要求。