Reversible photoswitching of dye-doped core-shell nanoparticles

We present a simple and versatile mechanism for the reversible photoswitching of dye-doped core-shell nanoparticles. Photochromic dithienylethenes are incorporated into the outer shell, close enough to the dyes entrapped in the core to efficiently quench them by energy transfer when photoconverted with UV light. The emission can be switched back on by irradiation with λ > 450 nm.     

Reversible two-photon photoswitching and two-photon imaging of immunofunctionalized nanoparticles targeted to cancer cells

Both photoswitchable fluorescent nanoparticles and photoactivatable fluorescent proteins have been used for super-resolution far-field imaging on the nanometer scale, but the photoactivating wavelength for such photochemical events generally falls in the near-UV (NUV) region (<420 nm), which is not preferred in cellular imaging. However, using two near-IR (NIR) photons that are lower in energy, we can circumvent such problems and replace NUV single-photon excitations (e.g., 390 nm) with NIR two-photon excitations (e.g., 780 nm). Thus, we have demonstrated that alternating 780 nm NIR two-photon and 488 nm single-photon excitations induces reversible on-off fluorescence switching of immunotargeted nanoparticles in the human breast cancer cell line SK-BR-3. Herein, two-photon absorption not only caused spiropyran-merocyanine photoisomerization within the particles but also imparted red fluorescence. In comparison with single-photon NUV excitations, two-photon NIR laser excitations can potentially reduce absorption-related photodamage to living systems because cellular systems absorb much more weakly in the NIR.     

Reversible photoswitching in a cell-sized vesicle

A photosensitive amphiphilic molecule can switch the shape of an assembled vesicle as determined by microscopic observation. Photoisomerization induces a change in membrane fluctuation behavior or a morphological transition between ellipsoid and bud shapes, depending on the asymmetrical degree of the initial shape. The mechanism of this reversible photoswitching in the vesicle morphology is interpreted in terms of a change in the effective cross-sectional area of the photosensitive molecule.     

Preparation and characterization of polyvinyl alcohol-capped CdSe nanoparticles at room temperature

Polyvinyl alcohol (PVA)-capped CdSe nanoparticles were successfully prepared by a one-step solution growth technique at room temperature and ambient pressure. X-ray diffraction, transmission electron microscopy, infrared spectra, and X-ray photoelectron spectra were used to characterize the final product. The as-prepared CdSe nanocrystals were well dispersed and uniform in shape and the diameter of the particles was confined within 8 nm. Ultraviolet-visible absorption spectra were used to study the confined growth process of PVA-capped CdSe nanoparticles. Photoluminescence measurement showed the near band-edge luminescence of the final product.     

One-step synthesis of stoichiometrically defined metal oxide nanoparticles at room temperature

A great variety of metal oxide nanoparticles have been readily synthesized by using alkali metal oxides, M(2)O (M is Na or Li) and soluble metal salts (metal chlorides) in polar organic solutions, for example, methanol and ethanol, at room temperature. The oxidation states of the metals in the resulting metal oxides (Cu(2)O, CuO, ZnO, Al(2)O(3), Fe(2)O(3), Bi(2)O(3), TiO(2), SnO(2), CeO(2), Nb(2)O(5), WO(3), and CoFe(2)O(4)) range from 1 to 6 and remain invariable through the reactions where good control of stoichiometry is achieved. Metal oxide nanoparticles are 1-30 nm and have good monodispersivity and displayed comparable optical spectra. These syntheses are based on a general ion reaction pathway during which the precipitate occurs when O(2-) ions meet metal cations (M(n+)) in anhydrous solution and the reaction equation is M(n+) + n/2 O(2-) --> MO(n/2) (n=1-6).     

Direct synthesis of fct-structured FePt nanoparticles at low temperature with assistance of poly(N-vinyl-2-pyrrolidone)

Direct synthesis of fct-structured FePt nanoparticles was successfully achieved by using poly(N-vinyl-2-pyrrolidone) as a protective reagent at lower temperature than the case using low molecular weight ligands as a protective reagent. Experimental data suggest that a transformation of FePt nanoparticles from face-centered cubic to face-centered tetragonal (fct) structure takes place at reaction temperature of 261 degrees C. The results of XRD and the magnetic properties exhibit that the FePt nanoparticles synthesized at 261 degrees C have partially ordered fct-structure and a ferromagnetic behavior at room temperature.     

Germania nanoparticles and nanocrystals at room temperature in water and aqueous lysine sols

Facile synthesis of nanometer-sized germania crystals and amorphous germania nanoparticles (ca. 1 nm) is investigated through hydrolysis of germanium tetraethoxide and subsequent condensation of germania in both pure water and aqueous lysine solutions. Germanium tetraethoxide rapidly hydrolyzes in pure water, leading to solvated germanate species at lower germania concentrations and the onset of nanometer-sized germania crystals at room temperature with increasing germania content. In the presence of the basic amino acid L-lysine, amorphous germania nanoparticles (ca. 1 nm) spontaneously form with increasing germania content and coexist with nanometer-sized germania crystals at higher germania concentrations. Lysine and germania concentration both influence crystallite size and morphology (i.e., polyhedral, cubic). The facile, room-temperature crystallization of germania in the presence and absence of lysine is striking. The fact that the crystal morphology shows no signs of nanoparticle aggregative assembly, as has been observed in the formation of other oxide crystals, suggests that crystal growth takes place by addition of dissolved species rather than nanoparticles, and could have implications for other oxide systems.     

Ring stain effect at room temperature in silver nanoparticles yields high electrical conductivity

We demonstrate that metallic rings formed spontaneously at room temperature via evaporation of aqueous drops containing silver nanoparticles (20-30 nm in diameter) exhibit high electrical conductivity (up to 15% of that for bulk silver). The mechanism underlying this self-assembly phenomena is the "ring stain effect", where self-pinning is combined with capillary flow to form a ring consisting of close-packed metallic nanoparticles along the perimeter of a drying droplet. Our macroscopic and microscopic (applying conductive atomic force microscopy) transport measurements show that the conductivity of the ring, which has a metallic brightness, is orders of magnitude larger than that of corresponding aggregates developed without the ring formation, where high conductivity is known to appear only after annealing at high temperature.     

Biosynthesis of iron and silver nanoparticles at room temperature using aqueous sorghum bran extracts

Iron and silver nanoparticles were synthesized using a rapid, single step, and completely green biosynthetic method employing aqueous sorghum extracts as both the reducing and capping agent. Silver ions were rapidly reduced by the aqueous sorghum bran extracts, leading to the formation of highly crystalline silver nanoparticles with an average diameter of 10 nm. The diffraction peaks were indexed to the face-centered cubic (fcc) phase of silver. The absorption spectra of colloidal silver nanoparticles showed a surface plasmon resonance (SPR) peak centered at a wavelength of 390 nm. Amorphous iron nanoparticles with an average diameter of 50 nm were formed instantaneously under ambient conditions. The reactivity of iron nanoparticles was tested by the H(2)O(2)-catalyzed degradation of bromothymol blue as a model organic contaminant.     

Rapid green synthesis of gold nanoparticles using Rosa hybrida petal extract at room temperature

This study reports a green method for the synthesis of gold nanoparticles using the aqueous extract of rose petals. The effects of gold salt concentration, extract concentration and extract quantity were investigated on nanoparticles synthesis. Gold nanoparticles were characterized with different techniques such as UV-vis spectroscopy, FT-IR spectroscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, dynamic light scattering and transmission electron microscopy. Transmission electron microscopy experiments showed that these nanoparticles are formed with various shapes. FT-IR spectroscopy revealed that gold nanoparticles were functionalized with biomolecules that have primary amine group (-NH2), carbonyl group, -OH groups and other stabilizing functional groups. X-ray diffraction pattern showed high purity and face centered cubic structure of gold nanoparticles. Dynamic light scattering technique was used for particle size measurement, and it was found to be about 10nm. The rate of the reaction was high and it was completed within 5 min.     

Xenon porometry at room temperature

Xenon porometry is a method in which porous material is immersed in a medium and the properties of the material are studied by means of 129Xe nuclear magnetic resonance (NMR) of xenon gas dissolved in the medium. For instance, the chemical shift of a particular signal (referred to as signal D) arising from xenon inside small pockets formed in the pores during the freezing of the confined medium is highly sensitive to the pore size. In the present study, we show that when naphthalene is used as the medium the pore size distribution of the material can be determined by measuring a single one-dimensional spectrum near room temperature and converting the chemical shift scale of signal D to the pore radius scale by using an experimentally determined correlation. A model has been developed that explains the curious behavior of the chemical shift of signal D as a function of pore radius. The other signals of the spectra measured at different temperatures have also been identified, and the influence of xenon pressure on the spectra has been studied. For comparison, 129Xe NMR spectra of pure xenon gas adsorbed to porous materials have been measured and analyzed.     

TEMPO-mediated, room temperature synthesis of pure CoO nanoparticles

Treatment of dicobalt octacarbonyl with TEMPO in THF at room temperature, in the presence of oleic acid as the sole additive, leads to the formation of monodisperse nanoparticles (ca. 3.0 nm diameter) of CoO; the particles agglomerate in solution at room temperature into aggregates, and this property has been used for the controlled preparation of hybrid materials.     

Grain size modulation on BaTiO3 nanoparticles synthesized at room temperature

A new method is developed to synthesize massive BaTiO₃ nanoparticles directly at room temperature. With this method, the synthesis efficiency is improved and mass preparation can be realized. Also, the grain size of the as-prepared nanoparticles can be modulated from several nanometers to 40 nm through proper selection of the content of water and the alkanol chain length of the dispersant. It was found that smaller water content and a larger alkanol chain length of the dispersant will lead to a finer grain size. The mechanisms of the grain size modulation of BaTiO₃ nanoparticles are also discussed.     

Self-assembly and cross-linking of FePt nanoparticles at planar and colloidal liquid-liquid interfaces

Terpyridine thiol functionalized FePt and Au NPs were self-assembled and cross-linked at the liquid-liquid interfaces using Fe(II) metal ion. Complexation of terpyridine with Fe(II) metal ion leads to NP network and affords stable membranes and colloidal shells at the liquid-liquid interfaces.     

Reversible photoswitching self-assembly of azobenzene-functionalized hyperbranched polyglycerol induced by host-guest chemistry

Reversible assembly and disassembly of rod-like large complex micelles have been achieved by applying photoswitching of supramolecular inclusion and exclusion of azobenzene-functionalized hyperbranched polyglycerol and α-cyclodextrin as driving force, promising a versatile system for self-assembly switched by light. Hydrogen-nuclear magnetic resonance (1H NMR) and Fourier transform infrared (FT-IR) spectroscopy were applied to characterize the azobenzene-functionalized hyperbranched polyglycerol. Atomic force microscopy (AFM), transmission electron microscopy (TEM) and dynamic laser light scattering (DLS) were employed to investigate and track the morphology of the rod-like large complex micelles before and after irradiation of UV light.