Automatic temperature regulation method for a tungsten spiral atomizer

Journal of Applied Spectroscopy -     

A pinhole-plate ultrasonic atomizer

A new pinhole-plate ultrasonic atomizer has been proposed and developed. A pinhole-plate having one or more pinholes is joined to a cavity filled with liquid and is vibrated by a circular ring piezoelectric element bonded onto it. The vibrating plate generates ultrasonic waves only in the vicinity of the pinholes to jet and atomize the liquid from them. The atomizer is very simple and compact, and extremely low in power consumption.     

涡旋柔性弹簧及组件性能实验研究

本文利用TSL系列弹簧刚度实验仪对用于斯特林制冷机中的单片柔性弹簧及柔性弹簧组件进行了实验研究。测试了四种不同尺寸弹簧刚度的动态特性,研究了单片弹簧的轴向刚度、径向刚度以及力矩特性,然后对柔性弹簧组件进行了实验研究,指出了不同组合方法下的刚度及弯矩特性,得到的数据可以作为斯特林制冷机设计的参考。     

Thermal analysis of integrated spiral inductors

This paper presents the thermal analysis results of integrated spiral inductors. Inductors, often used in analog integrated circuits for wireless applications, have very small dimensions, thus even a low power dissipation can give rise to elevated temperatures in circuits containing these elements. The thermal analysis is divided into two parts. First, the inductors thermal behavior is investigated using infrared thermography. Next, a theoretical model is developed and compared with the experimental measurements and numerical simulations.     

A measurement of elastic moduli for tungsten films on polymer substrate using wrinkling analysis

The elastic moduli of ultra thin tungsten (W) films on polymers were assessed with wrinkling analysis. Thin W films with a range of thickness between 17 and 100 nm were deposited on compliant polymers and Si strips using DC magnetron sputtering method, causing the tensile stress in a few GPa scale with respect to the thickness of W films. By applying lateral compression on polymer, wrinkle patterns were developed in the W thin film with well-defined amplitude and wavelength. Using a simple equation on wrinkle analysis, the range of elastic moduli was estimated with increasing the thickness. It was found that the elastic modulus and the tensile stress decreased with increasing the film thickness.     

Three-dimensional simulation of primary break-up in a close-coupled atomizer

Until now much of the modelling activity around close-coupled gas atomization has been mainly focused on gas-only flow with discrete phase interaction using Lagrangian-based models. However, this approach is unable to supply valuable information regarding the primary break-up mechanism of the melt being injected. Furthermore, much of existing numerical work is based on two-dimensional axisymmetric geometries, and therefore suffers the absence of three-dimensional flow features. In order to overcome these aspects the authors have carried out an analysis using a three-dimensional geometry by means of an Eulerian, Volume of Fluid, model to accurately present the early stages of melt stream behaviour at the atomizer’s melt inlet. The study investigates the mechanisms associated with primary break-up, and the results obtained highlight three modes under which a close-coupled atomizer may operate.     

新型圆角式高压碳化钨硬质合金顶锤的有限元分析

基于有限元法, 对新型圆角式高压碳化钨硬质合金顶锤进行了分析与研究.研究结果表明: 新型圆角式高压碳化钨硬质合金顶锤在不降低顶锤的传压效率的前提下, 能够将顶锤的使用寿命延长3.05%—16.75 %; 新型圆角式高压碳化钨硬质合金顶锤获得的极限腔体压力值可增加至6.09 GPa, 较传统顶锤(5.80 GPa)提高5%, 从而扩宽高压下功能材料的合成区间.新型圆角式高压碳化钨硬质合金顶锤的使用, 将降低六面顶液压机的使用成本, 促进高压技术和材料科学等学科的发展.