A highly selective colorimetric and fluorescent chemosensor for Cr2+ in aqueous solutions

A new rhodamine-based chemosensor was synthetized through a modified copper-catalyzed [3+2]-cycloaddition of an azidocoumarin with an alkynyl-rhodamine. Its sensing properties toward various metal cations in aqueous solutions were investigated by colorimetric changes, UV–vis and fluorescence spectroscopies. The sensor exhibited a high selectivity for Cr²⁺ over Cr³⁺ and other divalent cations such as Cu²⁺, Mg²⁺, Zn²⁺, Ca²⁺, Cd²⁺, Co²⁺, Hg²⁺ and Ni²⁺. The linear range of detection by fluorescence spectroscopy is 0.07–3.5 mM, with a detection limit of ca. 64 μM. The binding mode of Cr²⁺ with the sensor was rationalized through experimental evidences.     

A highly selective colorimetric aqueous sensor for mercury

A new colorimetric mercury sensor is reported based on binding to terpyridine derivatives. It is able to selectively detect Hg II ions over a number of environmentally relevant ions including Ca II, Pb II, Zn II, Cd II, Ni II, Cu II, and others. The response time upon exposure to Hg II is instantaneous. By the "naked eye," the detection limit of Hg II is 2 ppm (25 microM) in solution. With a spectrometer, this detection limit is increased down to 2 ppb (25 nM), which is the current EPA standard for drinking water. The significant problem of mercury poisoning requires new methods of detection that are sensitive and selective. Here we report a new simple system that takes advantage of the unique optical properties generated by terpyiridine-Hg complexes.     

A highly selective colorimetric sensor for Hg2+ based on a copper (II) complex of thiosemicarbazone in aqueous solutions

By applying an indirect strategy, a new copper (Ⅱ) complex of a thiosemicarbazone L has been successfully developed as a colorimetric chemosensor for the sensitive detection of mercury (Ⅱ) ions. In the presence of copper (Ⅱ) ions, the colorless solution of L became yellow; however, upon the addition of traces of mercury (Ⅱ) ions, the yellow color faded to colorless immediately. Other ions, including Fe3+ , Ag+ , Ca2+ , Zn2+ , Pb2+ , Cd2+ , Ni2+ , Co2+ , Cr3+ and Mg2+ had a negligible influence on the probe behavior. The detection limits were 5.0×10 -6 M and 3.0×10 -7 M of Hg2+ using the visual color changes and UV-vis changes respectively. Test strips based on Cu-L were fabricated, which could act as a convenient and efficient Hg2+ test kits.     

A simple yet highly selective colorimetric sensor for cyanide anion in an aqueous environment

The nucleophilic nature of cyanide is used to create a simple, sensitive, and highly effective sensor, 2-(trifluoroacetylamino)anthraquinone (2-TFAQ), for the easy "naked-eye" detection of very low concentrations of cyanide in an aqueous environment.     

Highly selective colorimetric chemosensor for Co2+

A new highly selective colorimetric chemosensor for Co(2+) was developed based on coumarin-conjugated thiocarbanohydrazone. The ligand senses Co(2+) in solution by changing its color from light yellow to deep pink. The sensor has been used in the development of practically viable colorimetric kits and as a staining agent for Co(2+) in microorganisms.     

A highly selective and colorimetric naked-eye chemosensor for Cu2+

A sample and practical colorimetric naked-eye chemosensor 3-nitro-4-ethylenediamido-nitrobenzene (2) for metal cations was designed and synthesized. It displays high selectivity and sensitivity for Cu2+ by the UV absorption which appeared a new peak at 525 nm and color change from yellow to red by naked-eye in CH3OH/H2O pH 7.6.     

A simple but highly sensitive and selective colorimetric and fluorescent probe for Cu2+ in aqueous media

In this paper, CN-DPA was prepared as an effective colorimetric and fluorescent probe for copper ions (Cu(2+)) in aqueous solution. It exhibits good sensitivity and selectivity for Cu(2+) over other metal ions both in aqueous solution and on a simple colorimetric paper-made test kit. Upon addition of Cu(2+), a remarkable color change from purple to colorless was easily observed by the naked eye, and a fluorescence quenching was also determined. Furthermore, CN-DPA can be used to quantitatively detect Cu(2+). The linear range was 0-5 μM determined by absorption spectrometry. All these selective and sensitive results indicate that CN-DPA could meet the selective requirements for biomedical and environmental application and be sensitive enough to detect Cu(2+) in environmental water samples, even in drinking water, which has a limit of 20 μM defined by the U.S. Environmental Protection Agency.     

A squaraine-based colorimetric and "turn on" fluorescent sensor for selective detection of Hg2+ in an aqueous medium

A novel squaraine-based chemosensor SQ-1 has been synthesized, and its sensing behavior toward various metal ions was investigated by UV-vis and fluorescence spectroscopies. In AcOH-H(2)O (40:60, v/v) solution, Hg(2+) ions coordinate with SQ-1 causing a deaggregation which induces a visual color and absorption spectral changes as well as strong fluorescence. In contrast, the addition of other metals (e.g., Pb(2+), Cd(2+), Cu(2+), Zn(2+), Al(3+), Ni(2+), Co(2+), Fe(3+), Ca(2+), K(+), Mg(2+), Na(+), and Ag(+)) does not induce these changes at all. Thus SQ-1 is a specific Hg(2+) sensing agent due to the inducing deaggregation of the dye molecule by Hg(2+).     

A new highly selective fluorescent K+ sensor

We describe the synthesis, properties, and application of a new fluorescent potassium chemosensor, KS2, for K(+) sensing and imaging in live cells. By virtue of a strong electron-withdrawing group, 2-dicyanomethylene-3-cyano-4,5,5-trimethyl-2,5-dihydrofuran (TCF), with a triazacryptand ligand, the new sensor can respond to K(+) up to 1.6 M. This is the first highly selective intracellular sensor suitable for sensing K(+) over a broad and high concentration range. Confocal fluorescence microscopy has established the utility of KS2 for live-cell K(+) detection. The application of KS2 combined with other sensors will be of great benefit for investigating cellular metabolism, detecting and diagnosing diseases including cancer, and monitoring responses to therapy.     

A differentially selective sensor with fluorescence turn-on response to Zn2+ and dual-mode ratiometric response to Al3+ in aqueous media

A novel quinoline-coumarin (QC) fluoroionophore conjugated by means of a triazolyl-pyrrolidinyl linker exhibits differential dual selectivity for Zn(2+) and Al(3+) in mixed media. QC acts as a turn on fluorescence sensor for Zn(2+) while exhibiting overall ratiometric selectivity for Al(3+) in aqueous media. Moreover, QC exhibited preferential second mode of selectivity for Al(3+) as it ratiometrically displaces Zn(2+) from the [QC + Zn(2+)] complex.     

Hg2+ selective fluorescent and colorimetric sensor: its crystal structure and application to bioimaging

A Hg(2+)-selective rhodamine 6G derivative bearing thiolactone moiety was synthesized, and its crystal structure with Hg(2+) is presented to explain the binding mode. In addition, highly selective "off-on"-type fluorescent change upon the addition of Hg(2+) was also applied to bioimaging.     

A high selective anion colorimetric sensor based on salicylaldehyde for fluoride in aqueous media

A new and simple salicylaldehyde-based sensor 1 designed for fluoride sensing has been investigated in DMSO and even in the 9/1 DMSO/H₂O (v/v) mixtures. The affinity constants of receptor 1 for anionic species in the 9/1 DMSO/H₂O (v/v) reveal that it is sensitive to F. Also, the color changes induced by anions can provide a way of detection by ‘naked-eye’. These result can be substantiated by the spectrum changes upon the addition of 25 equiv. anions to 1 in the 9/1 DMSO/H₂O solution. The further insights to the nature of interactions between the sensor 1 and F⁻ were investigated by ¹H NMR titration experiments in 9/1 DMSO-d₆/H₂O (v/v). In addition, the proposed binding mode between 1 and F⁻ was suggested.     

Interaction of positronium with Co2+ and Cu2+ ions in aqueous solutions

Interactions of positronium in aqueous solutions of Co²⁺ and Cu²⁺ ions have been investigated at room temperature (297 K) at varying concentrations using both lifetime and Doppler broadening of annihilation radiation techniques. In the case of Co²⁺, the results indicate spin conversion reaction alone. However, in the case of Cu²⁺, oxidation is predominant with a small contribution of spin conversion reaction. The corresponding rate constants have been evaluated.     

A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.     

A highly selective OFF-ON fluorescent sensor for zinc in aqueous solution and living cells

A novel compound, 2-p-tolyl-1H-imidazo[4,5-f][1,10]phenanthrolinium hydrogenselenite (HMPIP·HSeO(3), C1), shows a peculiar OFF-ON fluorescent response to Zn(2+) in aqueous solution and living cells.     

A highly selective and sensitive fluorescent chemosensor for Hg2+ in neutral buffer aqueous solution

A selective and sensitive fluorescent chemosensor for Hg2+, which was composed of two aminonaphthalimide fluorophores and a receptor of 2,6-bis(aminomethyl)pyridine, was synthesized through the reaction of 2,6-bis(chloromethyl)pyridine and N-[2-(2-hydroxyethoxy)ethyl]-4-piperazino-1,8-naphthalimide. The chemosensor showed an about 17-fold increase in fluorescence quantum yield upon addition of 1 equiv of Hg2+ in neutral buffer aqueous solution, and the other common metal ions did not notably disturb the detection of Hg2+.     

Fe3O4 and gamma-Fe2O3 nanoparticles for the adsorption of Co2+ from aqueous solution

The adsorption of Co2+ ions from nitrate solutions using iron oxide nanoparticles of magnetite (Fe3O4) and maghemite (gamma-Fe2O3) has been studied. The adsorption of Co2+ ions on the surface of the particles was investigated under different conditions of oxide content, contact time, solution pH, and initial Co2+ ion concentration. It has been found that the equilibrium can be attained in less than 5 min. The maximum loading capacity of Fe3O4 and gamma-Fe2O3 nanoparticles is 5.8 x 10(-5) and 3.7 x 10(-5) mol m(-2), respectively, which are much higher than the previously studied, iron oxides and conventional ion exchange resins. Co2+ ions were also recovered by dilute nitric acid from the loaded gamma-Fe2O3 and Fe3O4 with an efficiency of 86 and 30%, respectively. That has been explained by the different mechanisms by including both the surface and structural loadings of Co2+ ions. The surface adsorption of Co2+ on Fe3O4 and gamma-Fe2O3 nanoparticles has been found to have the same mechanism of ion exchange reaction between Co2+ in the solution and proton bonded on the particle surface. The conditional equilibrium constants of surface adsorption of Co2+ on Fe3O4 and gamma-Fe2O3 nanoparticles have been determined to be log K=-3.3+/-0.3 and -3.1+/-0.2, respectively. The structural loading of Co2+ ions into Fe3O4 lattice has been found to be the ion exchange reaction between Co2+ and Fe2+ while that into gamma-Fe2O3 lattice to fill its vacancy. The effect of temperature on the adsorption of Co2+ was also investigated, and the value of enthalpy change was determined to be 19 kJ mol(-1).     

A highly selective turn-on colorimetric, red fluorescent sensor for detecting mobile zinc in living cells

We describe ZRL1, a turn-on colorimetric and red fluorescent zinc ion sensor. The Zn(2+)-promoted ring opening of the rhodamine spirolactam ring in ZRL1 evokes a 220-fold fluorescence turn-on response. In aqueous media, ZRL1 turn-on luminescence is highly selective for Zn(2+) ions, with no significant response to other competitive cations, including Na(+), K(+), Ca(2+), Mg(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Cd(2+), or Hg(2+). In addition to these characteristics, preliminary results indicate that ZRL1 can be delivered to living cells and can be used to monitor changes in intracellular Zn(2+) levels.     

A simple naphthalene-based colorimetric sensor selective for acetate

A new naphthalene based receptor (L) has been designed and synthesized which shows a remarkable color change from colorless to pink on selective binding with acetate. The anion recognition property of the receptor via hydrogen bonding interactions is monitored by UV-vis, fluorescence, and ¹H NMR titrations. It is observed that in each case, the receptor shows a specific selectivity toward the acetate ion over other interfering anions. Thus, a significant bathochromic shift in UV-vis spectrum with a sharp pink color in ‘naked-eye’ makes the receptor suitable for the detection of the acetate ion.