In-plane buckling of circular arches and rings with shear deformations

A finite strain formulation is developed for elastic circular arches and rings in which the effects of shear deformations are included. Timoshenko beam hypothesis is adopted for incorporating shear. Finite strains are defined in terms of the normal and shear component of the longitudinal stretch. The constitutive relations for stress and finite strain are based on a hyperelastic constitutive model. Virtual work and equilibrium equations are derived. Closed-form in-plane buckling solutions are developed for circular rings and high arches under hydrostatic pressure. The effects of axial deformation prior to buckling as well as shear deformations are included in the buckling analysis. The formulation developed is compared with solutions in the literature and to the predictions of the finite element package ANSYS. The importance of including the effects of shear deformations for deep arches is investigated.     

In-plane stability of arches

Classical buckling theory is mostly used to investigate the in-plane stability of arches, which assumes that the pre-buckling behaviour is linear and that the effects of pre-buckling deformations on buckling can be ignored. However, the behaviour of shallow arches becomes non-linear and the deformations are substantial prior to buckling, so that their effects on the buckling of shallow arches need to be considered. Classical buckling theory which does not consider these effects cannot correctly predict the in-plane buckling load of shallow arches. This paper investigates the in-plane buckling of circular arches with an arbitrary cross-section and subjected to a radial load uniformly distributed around the arch axis. An energy method is used to establish both non-linear equilibrium equations and buckling equilibrium equations for shallow arches. Analytical solutions for the in-plane buckling loads of shallow arches subjected to this loading regime are obtained. Approximations to the symmetric buckling of shallow arches and formulae for the in-plane anti-symmetric bifurcation buckling load of non-shallow arches are proposed, and criteria that define shallow and non-shallow arches are also stated. Comparisons with finite element results demonstrate that the solutions and indeed approximations are accurate, and that classical buckling theory can correctly predict the in-plane anti-symmetric bifurcation buckling load of non-shallow arches, but overestimates the in-plane anti-symmetric bifurcation buckling load of shallow arches significantly.     

弹性拱静力屈曲的突变行为

应用数学突变理论研究弹性两铰拱的静力屈曲，分析中考虑了拱的挠度变化、轴向压缩变形的影响，得到拱面内失稳的尖点突变模型和临界条件。     

In-plane shear test of thin panels

Efficient application of thin-gage composite materials to helicopter fuselage structures necessitates that the materials be designed to operate at loads several times higher than initial buckling load. Methods are required to accurately measure and predict the response of thin-gage composites when subjected to these loads. This paper presents the results of an analytical and experimental study of the behavior of thin-gage composite panels subjected to in-plane shear loads. Finite-element stress analyses were used to aid in the design of an improved shear fixture that minimizes adverse corner stresses and tearing and crimping failure-modes characteristic of commonly used shear fixtures. Tests of thick buckle-resistant aluminum panels and thin aluminum and composite panels were conducted to verify the fixture design. Results of finite-element stress and buckling analyses and diagonal-tension-theory predictions are presented. Correlation of experimental data with analysis indicated that diagonal-tension theory can be used to predict the load-strain response of thin composite panels.     

In-plane free vibration and stability of loaded and shear-deformable circular arches

The first known equations governing vibrations of preloaded, shear-deformable circular arches are derived according to a variational principle for dynamic problems concerning an elastic body under equilibrium initial stresses. The equations are three partial differential equations with variable coefficients. The governing equations are solved for arches statically preloaded with a uniformly distributed vertical loading, by obtaining a static, closed-form solution and an analytical dynamic solution from series solutions and dynamic stiffness matrices. Convergence to accurate results is obtained by increasing the number of elements or by increasing both the number of terms in the series solution and the number of terms in the Taylor expansion of the variable coefficients. Graphs of non-dimensional frequencies and buckling loads are presented for preloaded clamped arches. They clarify the effects of opening angle and thickness-to-radius ratio on vibration frequencies and buckling loads. The effects of static deformations on vibration frequencies are also investigated. This work also compares the results obtained from the proposed governing equations with those obtained from the classical theory neglecting shear deformation.     

A catastrophic model for vibrational buckling of elastic arches

This paper represents an attempt at the application of catastrophe theory to thedynamic stability of engineering structures.The authors not only obtain a catastrophicmodel of vibrational buckling of elastic arches,but also give the critical condition of losingstability.     

In-plane shear testing of graphite-woven fabric composites

The losipescu shear test method was used to determine the in-plane shear response of AS4 and Celion carbon fiber/epoxy fabric composite materials. Several weave architectures were studied: AS4 uniweave, AS4 and Celion plain weaves, Celion 5-harness and 8-harness satin weaves. Specimens were tested using traditional strain gage techniques and full-field moiré interferometry. A full-node localized hybrid analysis is introduced to perform efficient reduction of moiré data, producing whole-field strain distributions in the specimen test section. It was found that the fabric yarn size greatly influenced the uniformity of the shear field in the specimen test section. However, consistent shear moduli still can be obtained using the modified losipescu specimen and Wyoming fixture except for fabrics with large fiber yarns.     

钢管混凝土圆弧桁架拱平面内徐变稳定分析

核心混凝土的徐变会增加钢管混凝土拱肋的屈曲前变形,降低结构的稳定承载力,因此只有计入屈曲前变形的影响,才能准确得到钢管混凝土拱的徐变稳定承载力。基于圆弧形浅拱的非线性屈曲理论,采用虚功原理,建立了考虑徐变和剪切变形双重效应的管混凝土圆弧桁架拱的平面内非线性平衡方程,求得两铰和无铰桁架拱发生反对称分岔屈曲和对称跳跃屈曲的徐变稳定临界荷载。探讨了钢管混凝土桁架拱核心混凝土徐变随修正长细比、圆心角和加载龄期对该类结构弹性稳定承载力的影响,为钢管混凝土桁架拱长期设计提供理论依据。     

Nonlinear analysis and buckling of elastically supported circular shallow arches

Arches are often supported elastically by other structural members. This paper investigates the in-plane nonlinear elastic behaviour and stability of elastically supported shallow circular arches that are subjected to a radial load uniformly distributed around the arch axis. Analytical solutions for the nonlinear behaviour and for the nonlinear buckling load are obtained for shallow arches with equal or unequal elastic supports. It is found that the flexibility of the elastic supports and the shallowness of the arch play important roles in the nonlinear structural response of the arch. The limiting shallownesses that distinguish between the buckling modes are obtained and the relationship of the limiting shallowness with the flexibility of the elastic supports is established, and the critical flexibility of the elastic radial supports is derived. An arch with equal elastic radial supports whose flexibility is larger than the critical value becomes an elastically supported beam curved in elevation, while an arch with one rigid and one elastic radial support whose flexibility is larger than the critical value still behaves as an arch when its shallowness is higher than a limiting shallowness. Comparisons with finite element results demonstrate that the analytical solutions and the values of the critical flexibility of the elastic supports and the limiting shallowness of the arch are valid.     

Transverse deformations associated with rectilinear shear in elastic solids

The rectilinear deformation of an incompressible, isotropic clastic solid is, in general, characterized by the two planar fields of pressure and displacement magnitude, and these are, in turn, restricted by the three, generally independent, differential equations of equilibrium. The over-determined nature of this situation suggests the possibility that transverse deformations may accompany rectilinear shear—a possibility not supported by the linear theory. Within this context we consider the class of equilibrium non-linear clasticity problems which is associated with cylindrical domains whose various boundaries each are displaced rigidly along their generators. An approximation scheme is developed for determining the cross sectional deformation and a specific example for a cylinder with eccentric circular cross section is given.     

Instabilities in shear and simple shear deformations of gold crystals

We use the tight-binding potential and molecular mechanics simulations to study local and global instabilities in shear and simple shear deformations of three initially defect-free finite cubes of gold single crystal containing 3480, 7813, and 58,825 atoms. Displacements on all bounding surfaces are prescribed while studying simple shear deformations, but displacements on only two opposite surfaces are assigned during simulations of shear deformations with the remaining four surfaces kept free of external forces. The criteria used to delineate local instabilities in the system include the following: (i) a component of the second-order spatial gradients of the displacement field having large values relative to its average value in the body, (ii) the minimum eigenvalue of the Hessian of the energy of an atom becoming non-positive, and (iii) structural changes represented by a high value of the common neighborhood parameter. It is found that these criteria are met essentially simultaneously at the same atomic position. Effects of free surfaces are evidenced by different deformation patterns for the same specimen deformed in shear and simple shear. The shear strength of a specimen deformed in simple shear is more than three times that of the same specimen deformed in shear. It is found that for each cubic specimen deformed in simple shear the evolution with the shear strain of the average shear stress, prior to the onset of instabilities, is almost identical to that in an equivalent hyperelastic material with strain energy density derived from the tight-binding potential and the assumption that it obeys the Cauchy-Born rule. Even though the material response of the hyperelastic body predicted from the strain energy density is stable over the range of the shear strain simulated in this work, the molecular mechanics simulations predict local and global instabilities in the three specimens.     

Long-term non-linear behaviour and buckling of shallow concrete-filled steel tubular arches

This paper presents a theoretical analysis for the long-term non-linear elastic in-plane behaviour and buckling of shallow concrete-filled steel tubular (CFST) arches. It is known that an elastic shallow arch does not buckle under a load that is lower than the critical loads for its bifurcation or limit point buckling because its buckling equilibrium configuration cannot be achieved, and the arch is in a stable equilibrium state although its structural response may be quite non-linear under the load. However, for a CFST arch under a sustained load, the visco-elastic effects of creep and shrinkage of the concrete core produce significant long-term increases in the deformations and bending moments and subsequently lead to a time-dependent change of its equilibrium configuration. Accordingly, the bifurcation point and limit point of the time-dependent equilibrium path and the corresponding buckling loads of CFST arches also change with time. When the changing time-dependent bifurcation or limit point buckling load of a CFST arch becomes equal to the sustained load, the arch may buckle in a bifurcation mode or in a limit point mode in the time domain. A virtual work method is used in the paper to investigate bifurcation and limit point buckling of shallow circular CFST arches that are subjected to a sustained uniform radial load. The algebraically tractable age-adjusted effective modulus method is used to model the time-dependent behaviour of the concrete core, based on which solutions for the prebuckling structural life time corresponding to non-linear bifurcation and limit point buckling are derived.     

非加劲钢板剪力墙的高阶弹性剪切屈曲分析

非加劲钢板剪力墙(SPSW)结构在水平荷载作用下易屈曲,形成主拉压应力场,并以拉力带方式提供水平承载力及抗侧刚度。传统拉杆模型(SM模型)用于非加劲SPSW结构分析或设计时忽略压力场的贡献,一般会低估高厚比较小的非加劲SPSW结构的抗侧能力。非加劲SPSW结构在水平力作用下会形成多波面外变形,与剪力墙板的高阶屈曲相似,可通过在修正的SM模型中引入对应于高阶屈曲的主压应力来反映压力场贡献,提高模型分析精度。考虑剪力墙板高厚比、高宽比及边缘构件刚度的影响,共设计66个单层、单跨和梁柱铰接的非加劲SPSW算例,并进行弹性屈曲分析。分析结果表明,高厚比及边缘构件刚度对非加劲SPSW结构的剪切屈曲系数影响不大;随着剪力墙板高宽比的增加,非加劲SPSW结构的剪切屈曲系数呈增大趋势。采用Matlab程序对66个非加劲SPSW算例的2～5阶剪切屈曲系数结果进行统计分析,并提出了简化公式。     

Non-linear in-plane buckling of rotationally restrained shallow arches under a central concentrated load

This paper investigates the non-linear in-plane buckling of pin-ended shallow circular arches with elastic end rotational restraints under a central concentrated load. A virtual work method is used to establish both the non-linear equilibrium equations and the buckling equilibrium equations. Analytical solutions for the non-linear in-plane symmetric snap-through and antisymmetric bifurcation buckling loads are obtained. It is found that the effects of the stiffness of the end rotational restraints on the buckling loads, and on the buckling and postbuckling behaviour of arches, are significant. The buckling loads increase with an increase of the stiffness of the rotational restraints. The values of the arch slenderness that delineate its snap-through and bifurcation buckling modes, and that define the conditions of buckling and of no buckling for the arch, increase with an increase of the stiffness of the rotational end restraints.     

The non-linear bending of a cantilever beam with shear and longitudinal deformations

A non-linear bending theory for beams is constructed which accommodates shear and longitudinal deformations. Using the theory, an analytical solution for the cantilever beam subject to a compressive load (the elastica) and a series solution for the horizontal cantilever under weight loading are derived. The effects of including shear and longitudinal deformations are found to be negligible for configurations in which the two deformations tend to offset one another—such as at the onset of buckling under a compressive load—but are shown to be significant for certain configurations in which the two deformations are additive—as in some instances of weight loading.     

Stabilization of beam parametric vibrations with shear deformations and rotary inertia effects

The purpose of this theoretical work is to present a stabilization problem of beam with shear deformations and rotary inertia effects. A velocity feedback and particular polarization profiles of piezoelectric sensors and actuators are introduced. The structure is described by partial differential equations with time-dependent coefficient including transverse and rotary inertia terms, general deformation state with interlaminar shear strains. The first order deformation theory is utilized to investigate beam vibrations. The beam motion is described by the transverse displacement and the slope. The almost sure stochastic stability criteria of the beam equilibrium are derived using the Liapunov direct method. If the axial force is described by the stationary and continuous with probability one process the classic differentiation rule can be applied to calculate the time-derivative of functional. The particular problem of beam stabilization due to the Gaussian and harmonic forces is analyzed in details. The influence of the shear deformations, rotary inertia effects and the gain factors on dynamic stability regions is shown.