Supramolecular systems based on the melamine salt of bis(hydroxymethyl)phosphinic acid (melafen) dihydrate and surfactants

Bis(hydroxymethyl)phosphinic acid and melamine were shown by FTIR and UV spectroscopy to form the salt (melafen), whose cations and anions involving water molecules can be joined into supramolecular structures due to electrostatic interactions and hydrogen bonds. The conductometry, dielcometric titration, and dynamic light scattering methods showed that melafen in water and chloroform in a concentration range of 10⁻¹⁰–10⁻⁴ mol L⁻¹ involving the solvent structures exist as supramolecular polymeric nanostructures, whose size and properties change nonlinearly depending on the melafen concentration. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1207–1214, June, 2008.     

Secondary structure elements in polylactic acid models

Geometry optimization results are reported on putative elements of secondary structure in decameric units of polylactic acid (PLA) analogous to those seen in protein structure—helical structures (α, π, 3₁₀) as well as a β-sheet—employing molecular mechanics, semiempirical, ab initio and density functional methods. The four possible structures of the deca-PLA are generally predicted, with all methods to be within ~15 kcal/mol of each other, with the more stable conformation varying depending on the method employed. The highest-level method employed here (M062x/6-311+G**) predicts that the α, π and 3₁₀ structures have very similar energies, with π slightly favored by values within the error limits of the method; this is in contrast with results obtained with less accurate semiempirical and empirical methods, which predict larger differences and other structures as favorites. Relative energies of poly-l and poly-d,l lactic acid structures indicate the former to be energetically-favored over the latter. Three types of weak interactions appear to dictate the relative stabilities of secondary structure elements in polylactic acid structures.     

Enthalpy characteristics of dissolution of <Emphasis Type="SmallCaps">l</Emphasis>-cysteine and <Emphasis Type="SmallCaps">l</Emphasis>-asparagine in aqueous solutions of acetonitrile and dimethyl sulfoxide at 298.15 K

The integral enthalpies of dissolution Δ_sol H ^m of l-cysteine and l-asparagine in mixtures of water with acetonitrile and dimethyl sulfoxide at the concentration of organic solvent up to 0.32 molar fractions were measured by means of dissolution calorimetry. The standard enthalpies of dissolution (Δ_sol H°) and transfer (Δ_trans H°) of the amino acids from water to a mixed solvent were calculated. The enthalpy coefficients of pair interactions for L-cysteine and L-asparagine with cosolvent molecules are positive, except for the L-asparagine-water-acetonitrile system. The concepts on the prevailing effect of specific interactions in solutions and the influence of the nature of the cosolvents and lateral substituents of the amino acids on the thermochemical characteristics of dissolution were used to explain the data obtained.     

On the use of plant cellulose nanowhiskers to enhance the barrier properties of polylactic acid

Polylactic acid (PLA) nanocomposites were prepared using cellulose nanowhiskers (CNW) as a reinforcing element in order to asses the value of this filler to reduce the gas and vapour permeability of the biopolyester matrix. The nanocomposites were prepared by incorporating 1, 2, 3 and 5 wt% of the CNW into the PLA matrix by a chloroform solution casting method. The morphology, thermal and mechanical behaviour and permeability of the films were investigated. The CNW prepared by acid hydrolysis of highly purified alpha cellulose microfibers, resulted in nanofibers of 60–160 nm in length and of 10–20 nm in thickness. The results indicated that the nanofiller was well dispersed in the PLA matrix, did not impair the thermal stability of this but induced the formation of some crystallinity, most likely transcrystallinity. CNW prepared by freeze drying exhibited in the nanocomposites better morphology and properties than their solvent exchanged counterparts. Interestingly, the water permeability of nanocomposites of PLA decreased with the addition of CNW prepared by freeze drying by up to 82% and the oxygen permeability by up to 90%. Optimum barrier enhancement was found for composites containing loadings of CNW below 3 wt%. Typical modelling of barrier and mechanical properties failed to describe the behaviour of the composites and appropriate discussion regarding this aspect was also carried out. From the results, CNW exhibit novel significant potential in coatings, membranes and food agrobased packaging applications.     

Effect of epoxidized sunflower oil on polylactic acid properties

Epoxidized sunflower oil (ESO) was utilized as a plasticizer for polylactic acid (PLA) using chloroform as a solvent by a solution casting process at various ratios of PLA to ESO. Fourier-transform infrared (FTIR) spectroscopy was used to identify the functional groups of PLA, ESO, and PLA/ESO blends. Thermal stability and mechanical and morphological properties of the blends were investigated by thermogravimetric analysis, tensile property measurements, and scanning electron microscopy technique, respectively. The FTIR spectra indicate that there are some molecular interactions by intermolecular hydrogen bonding between PLA and ESO. PLA/ESO blends show high thermal stability and significant improvement of mechanical properties compared with pure PLA. The highest elongation at break was obtained when the ratio of the PLA/ESO blend was 80/20. Morphological results of PLA/ESO blends show that ESO was well miscible with PLA.     

Processing-structure-property relationships of electrospun PLA-PEO membranes reinforced with enzymatic cellulose nanofibers

Three different solvent mixtures were used to prepare electrospun membranes based on polylactic acid (PLA), polyethylene oxide (PEO) and enzymatic cellulose nanofibers (CNF). The materials were characterized from a morphological, spectroscopic, mechanical and rheological point of view. Furthermore, swelling test were performed in order to assess the water uptake of each sample.The results put into evidence that the choice of the solvents affects the structure and the properties of the membranes. Among the protocols tested, using chloroform/acetone/ethanol mixture was found to allow a high degree of CNF dispersion and a good electrospinnability of polymer solutions. These features led to membranes with impressive improvement of mechanical properties (+350% in stiffness, +350% in tensile strength and +500% in toughness) with respect to those of PLA/PEO and dramatically increased the water uptake of these materials (up to +350% within 120 min).     

In vitro degradation behaviour of non-porous ultra-fine poly(glycolic acid)/poly(l-lactic acid) fibres and porous ultra-fine poly(glycolic acid) fibres

The in vitro degradation behaviour of non-porous ultra-fine poly(glycolic acid)/poly(l-lactic acid) (PGA/PLA) fibres and porous ultra-fine PGA fibres was investigated. The non-porous ultra-fine PGA/PLA fibres were prepared by electrospinning of a PGA/PLA solution in 1,1,1,3,3,3-hexafluoro-2-propanol and the porous ultra-fine PGA fibres were obtained from them via selective removal of PLA with chloroform. Since PLA has a lower degradation rate than PGA, the degradation rates of the ultra-fine PGA/PLA fibres decreased with increasing content of PLA. The porous ultra-fine PGA fibres were degraded in vitro in the order of non-porous PGA > P-PGA/PLA(90/10) > P-PGA/PLA(70/30) > P-PGA/PLA(50/50) > P-PGA/PLA(30/70) due to autocatalytic hydrolysis.     

Thermal properties of poly(lactic acid)/organo-montmorillonite nanocomposites

Poly(lactic acid)/organo-montmorillonite nanocomposites were prepared by melt intercalation technique. Maleic anhydride-grafted ethylene propylene rubber (EPMgMA) was added into the PLA/OMMT in order to improve the compatibility and toughness of the nanocomposites. The samples were prepared by single screw extrusion followed by compression molding. The effect of OMMT and EPMgMA on the thermal properties of PLA was studied. The thermal properties of the PLA/OMMT nanocomposites have been investigated by using differential scanning calorimeter (DSC) and thermo-gravimetry analyzer (TG). The melting temperature (T _m), glass transition temperature (T _g), crystallization temperature (T _c), degree of crystallinity (χ_c), and thermal stability of the PLA/OMMT nanocomposites have been studied. It was found that the thermal properties of PLA were greatly influenced by the addition of OMMT and EPMgMA.     

Attempt to incorporate ferrocenecarboxylic acid into polypyrrole during the electropolymerization of pyrrole in chloroform: its application to the electrocatalytic oxidation of ascorbic acid

 In this work, polypyrrole films with ferrocenecarboxylic acid incorporated (PPy/FCA) were prepared on a glassy carbon (GC) electrode in chloroform as an aprotic solvent with low dielectric constant, convenient for the preparation of the films by a precipitation mechanism. The electrochemical behaviour of the PPy/FCA-coated GC electrode was studied by cyclic voltammetry in aqueous solution with low pH. The results obtained show that the electrochemical response of FCA incorporated in polypyrrole is consistent with a reversible surface oxidation. An obvious electrocatalytic effect of PPy/FCA on the oxidation of ascorbic acid is observed in aqueous solution. Received: 30 July 1998 / Accepted: 3 March 1999     

Thermodynamics of Complexation of Alkali Metal Cations by a Lower-Rim Calix[4]arene Amino Acid Derivative

Complexation of alkali metal cations with 5,11,17,23-tetra-tert-butyl-26,28,25,27-tetrakis(O-methyl-d-α-phenylglycylcarbonylmethoxy)calix[4]arene (L) in methanol and acetonitrile was studied by means of direct and competitive microcalorimetric titrations at 25 °C. The thermodynamic parameters of complexation reactions showed that all the reactions investigated were enthalpically controlled. In both solvents the reaction enthalpy was most favorable for Na⁺ binding with L leading to the highest affinity of the examined calix[4]arene derivative towards this cation. The solubilities (and consequently the solution Gibbs energies) of the ligand were determined, as were the corresponding solution enthalpies and entropies. No significant difference was observed between the solution thermodynamic quantities of L in the two solvents, whereas the transfer of complex species from methanol to acetonitrile was found to be quite favorable. The interactions of solvent molecules with the free and the complexed ligand were investigated by ¹H NMR spectroscopy. It was concluded that in both cases inclusion of an acetonitrile molecule into the hydrophobic cavity of L occurred, which significantly affected the cation complexation in this solvent. The thermodynamic data were discussed regarding the structural properties of the ligand, the free and the complexed cations as well as the solvation abilities of the solvents examined. In this respect, the specific solvent-solute interactions and the intramolecular NH⋅⋅⋅O=C hydrogen bonds at the lower rim of L were particularly addressed.     

Calix[4]arene based selective fluorescent chemosensor for organic acid recognition

A novel calix[4]arene-based fluorescent chemosensor bearing a 2-aminopyridine moiety and a naphthalenic fluorophore was synthesized The chemical structure of the product was elucidated by FT-IR, MS-FAB, NMR and elemental analyses. Then, the properties and identification mechanism of the synthesized chemosensor were investigated. The results show that the chemosensor exhibits selective fluorescent quenching in the presence of aromatic organic acid in acetonitrile solution, and that the binding ability of the chemosensor with organic acid is in the order of p-cyanic-benzyl acid > p-chloric-benzyl acid > p-methoxyl-benzyl acid > benzyl acid. __________ Translated from Journal of South China University of Technology (Natural Science Edition), 2007, 35(4): 20–24 [译自: 华南理工大学学报(自然科学版)]     

Solvent Effects on the Protonation Constants of Some <Emphasis Type="Italic">α</Emphasis>-Amino Acid Esters in 1,4-Dioxane–Water Mixtures

The stoichiometric protonation constants of some α-amino acid esters (glycine methyl ester, glycine t-butyl ester, l-valine methyl ester, l-valine ethyl ester, l-valine t-butyl ester, l-serine methyl ester, l-serine ethyl ester, l-leucine methyl ester, l-leucine ethyl ester, l-leucine t-butyl ester, l-alanine methyl ester, l-alanine benzyl ester, l-phenylalanine methyl ester, l-phenylalanine ethyl ester, and l-phenylalanine t-butyl ester) in water and 20%, 40%, and 60% (v/v) 1,4-dioxane–water mixtures have been determined at an ionic strength of 0.10 mol⋅L⁻¹ NaCl and at 25.0±0.1 °C under a nitrogen atmosphere. A potentiometric method was used and the calculation of the protonation constants has been carried out using the BEST computer program. The results were discussed in terms of macroscopic properties of the mixed solvent. The stoichiometric protonation constants were influenced by changes in solvent composition and their variations were discussed in terms of preferential solvation. Also, knowledge the protonation constant of α-amino acid esters will be helpful when determining the microscopic equilibrium constants of their corresponding amino acids.     

Comparison of solvent mixtures for pressurized solvent extraction of soil fatty acid biomarkers

The extraction and transesterification of soil lipids into fatty acid methyl esters (FAMEs) is a useful technique for studying soil microbial communities. The objective of this study was to find the best solvent mixture to extract soil lipids with a pressurized solvent extractor system. Four solvent mixtures were selected for testing: chloroform:methanol:phosphate buffer (1:2:0.8, v/v/v), chloroform:methanol (1:2, v/v), hexane:2-propanol (3:2, v/v) and acetone. Soils were from agricultural fields and had a wide range of clay, organic matter and microbial biomass contents. Total lipid fatty acid methyl esters (TL-FAMEs) were the extractable soil lipids identified and quantified with gas chromatography and flame ionization detection. Concentrations of TL-FAMEs ranged from 57.3 to 542.2 n mole g⁻¹ soil (dry weight basis). The highest concentrations of TL-FAMEs were extracted with chloroform:methanol:buffer or chloroform:methanol mixtures than with the hexane:2-propanol or acetone solvents. The concentrations of TL-FAMEs in chemical groups, including saturated, branched, mono- and poly-unsaturated and hydroxy fatty acids were assessed, and biological groups (soil bacteria, mycorrhizal fungi, saprophytic fungi and higher plants) was distinguished. The extraction efficiency for the chemical and biological groups followed the general trend of: chloroform:methanol:buffer ≥ chloroform:methanol > hexane:2-propanol = acetone. Discriminant analysis revealed differences in TL-FAME profiles based on the solvent mixture and the soil type. Although solvent mixtures containing chloroform and methanol were the most efficient for extracting lipids from the agricultural soils in this study, soil properties and the lipid groups to be studied should be considered when selecting a solvent mixture. According to our knowledge, this is the first report of soil lipid extraction with hexane:2-propanol or acetone in a pressurized solvent extraction system.     

Preparation and characterization of benzoyl‐hydrazide‐derivatized poly(lactic acid) and γ‐cyclodextrin inclusion complex and its effect on the performance of poly(lactic acid)

A nucleating agent, benzyl‐hydrazide‐derivatized poly(lactic acid) (PLA) and γ‐cyclodextrin inclusion complex (PLA‐IC‐BH), was synthesized through a series of reactions. Poly(lactic acid) and γ‐cyclodextrin inclusion complex (PLA‐IC) was first obtained by ultrasonic co‐precipitation, which was then subjected to carboxylation, acylation, and amidation using benzoyl hydrazine and thionyl chloride. The composition and structure of PLA‐IC‐BH was confirmed by ¹H nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and X‐ray diffraction. PLA/PLA‐IC‐BH composites were prepared by melt blending and a hot‐press forming process. Mechanical properties, thermal stabilities, and crystallization behaviors of PLA/PLA‐IC‐BH samples were investigated by thermogravimetric analysis, differential scanning calorimetry (DSC), polarized optical microscopy (POM), rheological analysis, and so on. Mechanical testing and thermogravimetric analysis showed that the tensile strengths, impact properties, and thermal stabilities of PLA/PLA‐IC‐BH composites were improved significantly compared to pure PLA and PLA/PLA‐IC. DSC results showed that crystallinity of PLA was increased from 5.17% to 38.93% after introduction of PLA‐IC‐BH. POM results showed that PLA‐IC‐BH acted as a nucleating agent for PLA and enhanced its crystallization rate. Rotational rheological behaviors of PLA/PLA‐IC‐BH demonstrated that incorporation of PLA‐IC‐BH increased the rigidity of the network structure of the PLA matrix. Compared to those of PLA, the maximum torque and apparent viscosity of PLA/PLA‐IC‐BH composites were increased by 55.56% and 25.59%, respectively. Copyright © 2017 John Wiley & Sons, Ltd.     

Reversal of Enantiomeric Retention Order by Using a Single N-Derivatized Dipeptide as Chiral Mobile Phase Additive and Porous Graphitised Carbon as Stationary Phase

In this work the three dipeptides, Z-l-alanyl-l-glutaric acid (Z-l-ala-l-glu), Z-l-phenylanyl-l-glutaric acid (Z-l-phe-l-glu) and Z-glycyl-l-glutaric acid (Z-gly-l-glu) were tested as chiral counter ions for enantiomeric resolution of amino alcohols. The influence of solute and counter ion structure upon retention and enantioselectivity was evaluated. The chiral counter ions were dissolved in a mixture of polar solvents, i.e., ethyl acetate, methanol and acetonitrile and the achiral solid phase used was porous graphitic carbon, marketed as Hypercarb. The enantioselectivities observed for the tested solutes were highly influenced by the used chiral counter ion structure. For example no enantioselectivity was observed for (R,S)-alprenolol using Z-l-ala-l-glu while a separation factor (α) of 1.59 was obtained using Z-l-phe-l-glu as chiral counter ion. High selectivity factors (α > 2.7) were observed between enantiomers of tertiary amines using Z-l-phe-l-glu as counter ion. Interestingly, the structure of the counter ion, as well as the charge on Z-l-phe-l-glu and the mobile phase solvent composition, influenced the retention order of the enantiomers.     

Synthesis of glycyrrhetic acid derivatives

11-Deoxyglycyrrhetinic acid (DGA) (2) was produced by Clemmensen reduction of the C-11 carbonyl of 18β-glycyrrhetic acid (GA) (1). Four derivatives of GA and DGA (3a–3d) were synthesized. Their structures were elucidated using spectral data (IR, mass, ¹H, ¹³C NMR). __________ Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 153–155, March–April, 2008.     

Reconsideration of solvent effects calculated by semiempirical quantum chemical methods

AM1 and PM3 semiempirical calculations are reported for the solvent effects on the tautomeric equilibria of 2-pyridone/2-hydroxypyridine and 4-pyridone/4-hydroxypyridine in the gas phase and solution. The solvent effects on the tautomeric equilibria were investigated by self-consistent reaction field (SCRF) theory implemented in the AMPAC and MOPAC program in two different ways: one in which all the solvent relaxation is included in the quantum mechanics and the total energy must be corrected for the solvent change in energy, method A; and a second in which the quantum mechanics directly includes this term, method B. The calculated (AM1, method A) tautomeric equilibrium constants (log K₁) for 2-pyridone in the gas phase, cyclohexane, chloroform, and acetonitrile are ?0.3, 0.3, 0.8, and 1.3, respectively, in good agreement with the experimental data (?0.4, 0.24, 0.78, and 2.17, respectively). For 4-pyridone/4-hydroxypyridine differences between calculated log K₁ for the gas phase, chloroform and acetonitrile (?6.0, ?2.6, and ?1.2, respectively) and experimental data (< ?1, 0.11, and 0.66, respectively) are larger but the experimental values are also less certain. The experimental acetonitrile data are disturbed by specific interactions. An extension of the SCRF for aqueous solutions is reviewed. © 1993 John Wiley & Sons, Inc.     

Liquid–liquid extraction and transport through membrane of amino acid methylesters by calix[n]arene derivatives

The extractability together with the transport through liquid membrane of some amino acid methylesters by using p-tert-butylcalix[4]arene as extractant or carrier was studied. In this context, p-tert-butylcalix[n]arenes (n = 6, 8) were found to act as useful carriers or extractant reagents for l-tryptophan methylester and l-tyrosine methylester. The calix[n]arene derivatives used in experiments extracted amino acids methylesters from the aqueous phase into chloroformic phase in the presence of tropaeolin 00 ([4(4′-anilinophenylazo)benzenesulphonic acid]) as counterion at . The extraction and the transport depend on the structure of calixarenes, the structure of amino acids, the pH, and the nature of anion used as ion pair for cation-receptor complexes. The properties of solvent involved in liquid membrane play an important role in membrane stability and also in selecting membrane systems. The results demonstrated that the inclusion properties of the investigated hosts are correlated with their structural properties and also they suggest further possibilities for optimal separation of amino acids derivatives.     

Tensile and Thermal Properties of Poly(lactic acid)/Eggshell Powder Composite Films

Biodegradable composite films of poly(lactic acid) (PLA)/eggshell powder (ESP) were prepared by the composite film casting method using chloroform as the solvent. ESP was loaded in PLA in 1 to 5 wt.%. The films were subjected to tensile, FT-IR spectral, thermogravimetric, X-ray, and microscopic analyses. The tensile strength and modulus of the composite films were found to be higher than those of PLA and increased with ESP content up to 4 wt.% and then decreased. A reverse trend was observed in the case of percentage elongation at break. The X-ray diffractograms of the composite films indicated an increase in crystallinity with ESP content. The optical micrographs indicated uniform distribution of ESP particles in the composite films. However, the fractographs indicated agglomeration of ESP particles at 5 wt.% loading. The FT-IR spectra revealed no specific interactions between PLA and ESP. The thermal stability of the composite films increased with ESP content.     

Fundamental solution and single‐chain properties of polylactides

Polylactides (PLA) have been known for several decades and are recently of considerable commercial significance. However, the literature on basic chain properties and solution characterization is divided and inconsistent. In this study, a comprehensive and well‐controlled set of experiments is combined with rigorous quantitative analysis to resolve existing apparent contradictions. Homopolymers and copolymers spanning wide ranges of molecular weight and stereoisomer proportions were prepared by ring‐opening polymerizations of L ‐ and D ‐lactides using stannous octanoate as the catalyst. Samples were characterized by means of: (1) dilute‐solution viscometry in three different solvents; (2) size exclusion chromatography in tetrahydrofuran (THF) with light scattering detection; (3) static multiangle light scattering in a mixed acetonitrile–dichloromethane solvent; (4) variable‐angle spectroscopic ellipsometry; and (5) melt rheology. The data imply that PLA are typical linear flexible polymers; unperturbed PLA chain dimensions are describable in terms of a characteristic ratio of 6.5 ± 0.9, regardless of stereoisomer content. The Schulz‐Blaschke and Mark‐Houwink constants for dilute PLA solutions in chloroform and in THF are determined. For chloroform at 30°C, the correct values are k_SB = 0.302, K = 0.0131 (mL/g), and a = 0.759, while for THF at 30°C, the correct values are k_SB = 0.289, K = 0.0174 (mL/g), and a = 0.736. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3100–3111, 2005