Beyond the Roger Brown rearrangement: long-range atom topomerization in conjugated polyynes

Long-range carbon atom topomerization in a 1,3-diyne has been demonstrated for the first time. 1-Phenyl-4-p-tolyl-1,3-butadiyne, (13)C-enriched at C-1, was synthesized and subjected to flash vacuum pyrolysis. At 800 degrees C and 0.01 Torr, this resulted in nearly complete (13)C label equilibration between C-1 and C-2, as seen by NMR analysis. Pyrolysis at 900 degrees C further led to ca. 35% of the label migrating about equally to C-3 and C-4. These results demonstrate that both intrabond and interbond atom exchange processes are operative, with the former having a lower activation barrier. DFT and Moller-Plesset calculations support a mechanism that passes through Brown rearrangement (1,2-shift), closure to trialene (bicyclo[1.1.0]-1,3-butadiene), bond-shift isomerization to exchange C-2 and C-3, and ring opening. The resulting vinylidene can rearrange to a butadiyne with the isotopic label at C-3 or C-4. Consistent with earlier calculations, trialene is predicted to have alternating peripheral bonds, with a weak central sigma bond and significant diradical character. Trialene is predicted [(B3LYP/6-311+G(2d,p)] to lie 64.6 kcal/mol above butadiyne, with barriers of 2.2 and 4.4 kcal/mol, respectively, for ring opening or bond-shift isomerization. Other potential rearrangement mechanisms which pass through tetrahedrene (E(rel) = 167.2 kcal/mol) or 1,2,3-cyclobutatriene (E(rel) = 161.1 kcal/mol) lie at much higher energies.     

The conjugation stabilization of 1,3-butadiyne is zero

[reaction: see text] In contrast to 1,3-butadiene, the textbook example of "conjugation stabilization", G3(MP2) calculations yielding the enthalpy of hydrogenation Delta(hyd)H(298) of 1,3-butadiyne indicate that it is not stabilized by the conjugated configuration of its triple bonds. Differences between ethylenic and acetylenic pi bonds are examined in the light of CAS-MCSCF calculations on 1,3-butadiene and 1,3-butadiyne.     

Enediynes in 11-membered rings. Synthesis, structure, and reactivity of highly strained but unusually stable macrocycles.

The synthesis of two new aromatic cyclic enediynes 1a and 1b using a double Wittig condensation, followed by bromination and di-dehydrobromination, is reported. The structures were determined using X-ray crystallography. The observed C(1)-C(6) distances of the enediyne moiety in the oxygen- and sulfur-containing eleven-membered rings are quite short with 3.44 and 3.50 A, respectively, indicating the highly strained nature of these compounds. Isodesmic calculations at the B3LYP/6-31G level of theory indicate a strain energy of 8.2 and 5.8 kcal/mol, respectively. Despite the highly strained ring system, the compounds were found to be stable under thermal, photochemical, and electron-transfer conditions. Using BLYP/6-311+G/BLYP/6-31G calculations, the origin of this unusual stability was traced to the high energy of the 1,4 benzyne diradicals formed via Bergman cyclization. For the radical cation, both the C(1)-C(6) and the C(1)-C(5) cyclization mode previously reported for acyclic analogues of 1 were found to be energetically prohibitive.     

2-Deoxy-beta-D-erythro-pentofuranose: hydroxymethyl group conformation and substituent effects on molecular structure, ring geometry, and NMR spin-spin coupling constants from quantum chemical calculations.

The effect of hydroxymethyl conformation (gg, gt, and tg rotamers about the C4-C5 bond) on the conformational energies and structural parameters (bond lengths, bond angles, bond torsions) of the 10 envelope forms of the biologically relevant aldopentofuranose, 2-deoxy-beta-D-erythro-pentofuranose (2-deoxy-D-ribofuranose) 2, has been investigated by ab initio molecular orbital calculations at the HF/6-31G level of theory. C4-C5 bond rotation induces significant changes in the conformational energy profile of 2 (2gt and 2tg exhibit one global energy minimum, whereas 2gg exhibits two nearly equivalent energy minima), and structural changes, especially those in bond lengths, are consistent with predictions based on previously reported vicinal, 1,3- and 1,4-oxygen lone pair effects. HF/6-31G-optimized envelope geometries of 2gg were re-optimized using density functional theory (DFT, B3LYP/6-31G), and the resulting structures were used in DFT calculations of NMR spin-spin coupling constants involving 13C (i.e., J(CH) and J(CC) over one, two, and three bonds) in 2gg according to methods described previously. The computed J-couplings were compared to those reported previously in 2gt to assess the effect of C4-C5 bond rotation on scalar couplings within the furanose ring and hydroxymethyl side chain. The results confirm prior predictions of correlations between 2J(CH), 3J(CH), 2J(CC) and 3J(CC), and ring conformation, and verify the usefulness of a concerted application of these couplings (both their magnitudes and signs) in assigning preferred ring and C4-C5 bond conformations in aldopentofuranosyl rings. The new calculated J-couplings in 2gg have particular relevance to related J-couplings in DNA (and RNA indirectly), where the gg rotamer, rather than the gt rotamer, is observed in most native structures. The effects of two additional structural perturbations on 2 were also studied, namely, deoxygenation at C5 (yielding 2,5-dideoxy-beta-D-erythro-pentofuranose 4) and methyl glycosidation at O1 (yielding methyl 2-deoxy-beta-D-erythro-pentofuranoside 5) at the HF/6-31G level. The conformational energy profile of 4 resembles that found for 2gt, not 2gg, indicating that 4 is an inappropriate structural mimic of the furanose ring in DNA. Glycosidation failed to induce differential stabilization of ring conformations containing an axial C1-O1 bond (anomeric effect), contrary to experimental data. The latter discrepancy indicates that either the magnitude of this differential stabilization depends on ring configuration or that solvent effects, which are neglected in these calculations, play a role in promoting this stabilization.     

Perthio- and perseleno-1,3-butadienes, -but-1-ene-3-ynes,and -[3]-cumulenes: one-step syntheses from 1,4-dilithio-1,3-butadiyne

[reaction: see text] Treatment of 1,4-dilithio-1,3-butadiyne (1) with dichalcogenides RSSR or RSeSeR affords dithio- and diseleno-1,3-butadiynes (2, 3), perthio- and perseleno-[3]-cumulenes (4, 5), perthio- and perseleno-1,3-butadienes (6, 7), and/or perthio- and perseleno-but-1-ene-3-ynes (8, 9). The products can be controlled by stoichiometry and temperature, by the presence or absence of oxygen, and by choice of the "R" group. By X-ray crystallography, hexa(methylthio)-1,3-butadiene is highly twisted, with a torsion angle [Phi(CCCC)] of 84.7 degrees and an elongated C(2)-C(3) distance of 1.484(3) A.     

Thiyl radical interaction with pyrimidine C5-C6 double bond

Addition and elimination interaction of thiyl radicals with the C5-C6 double bond in pyrimidines was studied by the pulse radiolysis technique in aqueous solution with the use of different monitoring systems. For this purpose, p-thiocresol, cysteamine hydrochloride, and mercaptoethanol were used. The rate constants of addition and elimination of thiyl radicals were determined by applying the modified version of ACUCHEM (computer program for modeling complex reaction systems). Aliphatic thiyl radicals add to the pyrimidine C5-C6 double bond with k = 1.0-3.0 x 10(7) dm3 mol(-1) s(-1), whereas elimination takes place with k = 0.7-2.0 x 10(5) s(-1). Quantum chemical calculations at the B3LYP/6-31G(d)/PCM level show that the addition should occur at the C6 position of the pyrimidine ring and that the energy of interaction between thiyl radicals and the pyrimidine double bond C5-C6 is low.     

N-甲基吡咯-2-甲醛激发态结构动力学及其溶剂效应的共振拉曼光谱和密度泛函理论研究

获取了覆盖N-甲基吡咯-2-甲醛(NMPCA)A-带和B-带电子吸收共7个激发波长的共振拉曼光谱,并结合含时密度泛函理论(TD-DFT)方法研究了的A-带和B-带电子激发和Franck-Condon区域结构动力学.TD-B3LYP/6-311++G(d,p)计算表明:A-带和B-带电子吸收的跃迁主体为π→π*.共振拉曼光谱可以指认为,11-13振动模式(A-带激发)或者7-11振动模式(B-带激发)的基频、倍频和组合频,其中C=O伸缩振动(ν7)、环的变形振动+N1-C6伸缩振动(ν17)、环的变形振动(ν21)和C6-N1-C2/C2-C3-C4不对称伸缩振动(ν14)占据了绝大部分.这表明NMPCA的Sπ激发态结构动力学主要沿C=O伸缩振动、环的变形振动和环上N1-C6伸缩振动等反应坐标展开.在同一溶剂的共振拉曼光谱中随激发波长由长变短,ν7与ν14的强度比呈现出由强变弱再变强的现象,这种变化规律被认为与Franck-Condon区域Sn/Sπ态混合或势能面交叉有关.溶剂对Sn/Sπ态混合或势能面交叉具有调控作用.     

Synthesis of phosphorus ylides bearing a P-H bond from a kinetically stabilized 1,3,6-triphosphafulvene

In mixing 2,4,6-tris(2,4,6-tri-tert-butylphenyl)-1,3,6-triphosphafulvene with alkyllithium compounds and acetic acid, both of nucleophilic alkylation and electrophilic protonation occurred at the exo sp2-phosphorus atoms to afford [2,4-bis(2,4,6-tri-tert-butylphenyl)-1,3-diphosphacyclopentadienylidene](alkyl)(2,4,6-tri-tert-butylphenyl)phosphoranes which are phosphorus ylides that bear a P-H bond. A phosphorus ylide bearing both P-H and P-F bonds was obtained by reaction of 2,4,6-tris(2,4,6-tri-tert-butylphenyl)-1,3,6-triphosphafulvene with hydrogen tetrafluoroborate, and the structure was determined by X-ray crystallography. Both P=C double bond and P(+)-C(-) zwitterionic character was indicated by the metric parameters. The isolated phosphorus ylide bearing a P-H bond, [2,4-bis(2,4,6-tri-tert-butylphenyl)-1,3-diphosphacyclopentadienylidene](2,4,6-tri-tert-butylphenyl)phosphorane, showed no isomerization by H-migration to the corresponding phosphinodiphospholes, probably due to the pi-accepting ability of the unsaturated PC bonds and aromaticity of the C3P2 ring. The ylide structure and aromaticity of 2,4-diphosphacyclopenta-2,4-dienylidenephosphorane was characterized by theoretical calculations. In addition, the regioselective protonation of the lithiated phosphinodiphospholes generated from the 1,3,6-triphosphafulvene is discussed.     

Predicting reactivity and stereoselectivity in the Nazarov reaction: a combined computational and experimental study

The Nazarov reaction of pentadienyl cations generated by protonation of either dienones or alkoxytrienes has been examined in detail both experimentally and by DFT calculations. In particular, calculations at the B3LYP/6‐311G** level of theory accurately predicted, and accounted for, the outcome of the Brønsted acid catalyzed electrocyclization of 4π‐electron systems in which one of the double bonds involved in the process was embedded in N‐ and S‐heterocyclic rings. Calculations showed that both heteroatoms are capable of accelerating the ring closure by stabilizing the partial positive charge which develops at C‐6 (C‐2) in the transition state, with S‐heterocyclic derivatives being more reactive than the corresponding N‐containing compounds. In general, pentadienyl cations generated by protonation of alkoxytrienes were expected to react faster than those obtained by protonation of the corresponding dienones, as the latter were stabilized by a hydrogen bond. The presence of a substituent on the heterocyclic ring significantly affects the stereoselectivity (torquoselectivity) only in the case of the N‐heterocyclic derivatives, in which a 2‐alkyl group is axially oriented, providing the cis‐2,5‐disubstituted isomer only. Instead, with substituted S‐heterocyclic compounds, the anticipated torquoselectivity was very low and, in fact, a 3:1 diastereomeric mixture between the trans and cis products was experimentally found after ring closure. For this study, the synthesis of the appropriate N‐ and S‐containing dienones and alkoxytrienes was realized to evaluate the predictivity power of the DFT computations, which was very good in all of the cases examined, both in terms of reactivity and stereoselectivity. The consistency observed between computational and experimental results, therefore, shows the usefulness of DFT calculations at the B3LYP/6‐311G** level of theory as a robust instrument for the prediction of reactivity and stereoselectivity in the Nazarov electrocyclic reaction.     

A computational study of the cycloaddition of thiobenzophenone S-methylide to thiobenzophenone

The cycloaddition of thiobenzophenone S-methylide to thiobenzophenone, an experimentally well-known reaction, was studied, using (U)HF/3-21G* for finding stationary points and (U)B3LYP/6-31G*//(U)HF/3-21G* single-point calculations for energies. Some optimizations were performed by (U)B3LYP/ 6-31G* to check the reliability of the calculations. The comparison of the concerted pathways and stepwise reactions via C,C-biradicals and C,S-zwitterions showed that the formation of a tetraphenyl-substituted C,C-biradical and its ring closure to 4,4,5,5-tetraphenyl-1,3-dithiolane constitutes the energetically most probable pathway of product formation, despite the fact that the regioisomeric 2,2,4,4-tetraphenyl-substituted product is more favorable by 17 kcal mol(-1). Model calculations on bond dissociation energies showed that (U)B3LYP with various basis sets overestimates radical stabilization, whereas CBS-QB3 closely reproduced experimental values. Results with the BLYP functional are similar to those with B3LYP. The consequences of the overestimation of radical stability for the cycloaddition mechanism involving biradicals are discussed. Thiobenzophenone S-methylide, if not captured by a dipolarophile, dimerizes to 2,2,3,3-tetraphenyl-1,4-dithiane. Calculation disclosed likewise a tetraphenyl-substituted C,C-biradical as intermediate.     

4-Methoxy- and 4-cyano-substituted lithium aryloxides: electronic effects of substituents on aggregation

The para-substituted lithium aryloxides [{4-NC-C6H4OLi.(Pyr)2}2.Pyr] 1a, [{4-NC-C6H4OLi.(THF)2}2] 1b, [{4-MeO-C6H4OLi.Pyr}4] 2a, [4-MeO-C6H4OLi.(THF)n] 2b, [{4-NC-2,6-(t-Bu)2-C6H2OLi.(Pyr)2}infinity] 3a, [{4-NC-2,6-(t-Bu)2-C6H2OLi.(THF)2}infinity] 3b, [{4-MeO-2,6-(t-Bu)2-C6H2OLi.Pyr}2.(Pyr)2] 4a, and [4-MeO-2,6-(t-Bu)2-C6H2OLi.(THF)n] 4b were prepared by the direct deprotonation of the corresponding phenol with an alkyllithium base (BuLi or MeLi) in the appropriate solvent, either pyridine or THF. All compounds were characterized by 1H and 13C NMR spectroscopy, and the crystal structures of 1a, 1b, 2a, 3a, 3b and 4a were elucidated. The cyano derivatives 1a and 1b adopt discrete tetrasolvated Li2O2 ring dimers whereas the methoxy analogue 2a crystallizes as a tetrasolvated molecular tetramer with a pseudo cubic Li4O4 core. The sterically encumbered cyano derivatives 3a and 3b form isostructural 1D polymeric chains of monomers via bridging of the phenolate ligands through Li...NC and Li-O contacts. In comparison, the crystal structure of the methoxy counterpart 4a is a disolvated molecular Li2O2 ring dimer. Solution NMR spectroscopic studies of 1-4 in d5-pyridine and d8-THF indicate that the methoxy complexes are more highly aggregated than the cyano derivatives, consistent with the solid-state studies. Ab initio molecular orbital calculations at the HF/6-31G* level of theory indicate that the origin of the aggregation state variations between the cyano and methoxy complexes is due to electronic effects.     

Conformational flexibility of 1,3-cyclohexadiene and its aza analogs

The conformational flexibility of 1,3-cyclohexadiene and its analogs — pyridine and pyrimidine derivatives— was studied by HF/6-31G** ab initio quantum chemical calculations. The potential surface calculations and normal vibration shape analysis show that the molecules exhibit two weakly coupled ring deformation modes. One of the modes may be described as rotation around the C(sp₃)-C(sp₂) bond leading to a transition state of the ring inversion process. The other mode involves flattening of the butadiene fragment and a loss of planarity for endocyclic double bonds without any pronounced changes in the conformation of the saturated part of the molecule. An accurate calculation of the ring inversion barrier demands inclusion of electron correlation effects. Translated fromZhurnal Strukturnoi Khimii, Vol. 41, No. 3, pp. 474-479, May-June, 2000.     

Theoretical calculations of the effects of 2-heavier group 14 element and substituents on the singlet-triplet energy gap in cyclopentane-1,3-diyls and computational prediction of the reactivity of singlet 2-silacyclopentane-1,3-diyls

UDFT and CASSCF calculations with the 6-31G(d) basis set were performed to investigate the heavier group 14 element (M) effect on the ground-state spin multiplicity of cyclopentane-1,3-diyls and their reactivity. The calculations find that 2-metallacyclopentane-1,3-diyls (M = Si, Ge) that possess a variety of substituents (X = H, Me, F, OR, SiH(3)) at M(2) are singlet ground-state molecules. The energies of the 1,3-diphenyl-substituted singlet 2-silacyclopentane-1,3-diyls are calculated to be ca. 5 kcal/mol lower than those of the intramolecular ring-closure products, i.e., 1,4-diphenyl-5-silabicyclo[2.1.0]pentanes, at the B3LYP/6-31G(d) level of theory. The energy barrier for the disrotatory ring closure of singlet 2,2-dimethyl-1,3-diphenyl-2-silacyclopentane-1,3-diyl (lambda(calcd) = 757 nm, f = 1.01 at RCIS/6-31G(d)) to the corresponding 5-silabicyclo[2.1.0]pentane is computed to be 11.6 kcal/mol, which is 13.1 kcal/mol lower in energy than that for the conrotatory ring-opening to a 3-silapenta-1,4-diene. The computational work predicts that singlet 1,3-diaryl-2-silacyclopentane-1,3-diyls are persistent molecules under conditions without trapping agents.     

Ionic-liquid-promoted decaborane dehydrogenative alkyne-insertion reactions: a new route to o-carboranes

Unlike in conventional organic solvents, where Lewis base catalysts are required, decaborane dehydrogenative alkyne-insertion reactions proceed rapidly in biphasic ionic-liquid/toluene mixtures with a wide variety of terminal and internal alkynes, thus providing efficient, one-step routes to functional o-carborane 1-R-1,2-C2B10H11 and 1-R-2-R'-1,2-C2B10H10 derivatives, including R = C6H5- (1), C6H13- (2), HC[triple bond]C-(CH2)5- (3), (1-C2B10H11)-(CH2)5- (4), CH3CH2C(O)OCH2- (5), (C2H5)2NCH2- (6), NC-(CH2)3- (7), 3-HC[triple bond]C-C6H4- (8), (1-C2B10H11)-1,3-C6H4- (9), HC[triple bond]C-CH2-O-CH2- (10); R,R' = C2H5- (11); R = HOCH2-, R' = CH3- (12); R = BrCH2-; R' = CH3- (13); R = H2C=C(CH3)-, R' = C2H5- (14). The best results were obtained from reactions with only catalytic amounts of bmimCl (1-butyl-3-methylimidazolium chloride), where in many cases reaction times of less than 20 min were required. The experimental data for these reactions, the results observed for the reactions of B10H13(-) salts with alkynes, and the computational studies reported in the third paper in this series all support a reaction sequence involving (1) the initial ionic liquid promoted formation of the B10H13(-) anion, (2) addition of B10H13(-) to the alkyne to form an arachno-R,R'-C2B10H13(-) anion, and (3) protonation of arachno-R,R'-C2B10H13(-) to form the final neutral 1-R-2-R'-1,2-C2B10H10 product with loss of hydrogen.     

Acyclic distonic acylium ions: Dual free radical and acylium ion reactivity in a single molecule

Three gaseous acyclic distonic acylium ions: *CH2-CH2-C+=O, *CH2-CH2-CH2-C+=O, and *CH2=C(CH2)-C+=O, are found to display dual free radical and acylium ion reactivity; with appropriate neutrals, they react selectively either as free radicals with inert charge sites, or (and more pronouncedly) as acylium ions with inert radical sites. The free radical reactivity of the ions is demonstrated via the Kenttamaa reaction: CH3S* abstraction with the spin trap dimethyl disulfide; their ion reactivity by two reactions most characteristic of acylium ions: transacetalization with 2-methyl-1,3-dioxolane and the gas-phase Meerwein reaction, that is, expansion of the three-membered epoxide ring of epichlorohydrin to the five-membered 1,3-dioxolanylium ion ring. In "one-pot" reactions with gaseous mixtures of epichlorohydrin and dimethyl disulfide, the ions react selectively at either site, but more readily at the acylium charge site, to form the two mono-derivatized ions. Further reaction at either the remaining free radical or acylium charge site forms a single bi-derivatized ion as the final product. Becke3LYP/6-31G(d) calculations predict the reactions at the acylium charge sites of the three distonic ions to be highly exothermic, and both the "hot" transacetalization and epoxide ring expansion products of *CH2-CH2-CH2-C+=O to dissociate rapidly by H2C=CH2 loss in overall exothermic processes. The calculations also predict highly spatially separate odd spin and charge sites for the novel cyclic distonic ketal ions formed by the reactions at the acylium charge sites.     

Tautomers and conformers of malonamide, NH2-C(O)-CH2-C(O)-NH2: vibrational analysis, NMR spectra and ab initio calculations

The conformational and tautomeric compositions of malonamide, NH2-C(O)-CH2-C(O)-NH2 were determined by vibrational spectroscopy and theoretical calculations (HF/6-31G*, B3PW91/6-31G*). Solid state Fourier transform infrared and Raman spectra were analysed. They reveal the existence of a diketo tautomer. Theoretical calculations predict a diketo structure belonging to the C1 symmetry group. No enol form is present in the molecule in the solid. 13C-NMR studies show only signals of a diketo tautomer.     

Hydrogen rearrangement and ring cleavage reactions study of progesterone by triple quadrupole mass spectrometry and density functional theory

The fragmentation mechanisms of progesterone have been studied by triple quadrupole tandem mass spectrometry (MSMS) and density functional theory (DFT). Mechanisms leading to major product ions are proposed. The data suggest that progesterone fragments preferentially via hydrogen and other rearrangements lead to neutral losses. These fragmentations are quite complex and are preceded by σ-bond cleavages in most cases. Four major pathways for progesterone fragmentation are proposed involving: (1) cleavage of ring B at C9-C10, (2) cleavage of C6-C7 bond in ring B through m/z 191, (3) two types of cleavages of ring D, and (4) ketene elimination in ring A. Pathways (1)-(3) proceed via charge-remote fragmentations while pathway (4) proceeds via charge-site initiated mechanism. The geometry of product ions in these pathways were optimized using DFT at the B3LYP/6-311G(d,p) level of theory from which the free energies of the pathways were calculated. The effect that the choice of basis sets and density functionals has on the results was tested by performing additional calculations using B3LYP/6-31G(d) and B3PW91/6-311G(d,p).     

Theoretical conformational analysis for neurotransmitters in the gas phase and in aqueous solution. Norepinephrine

The natural neurotransmitter (R)-norepinephrine takes the monocationic form in 93% abundance at the physiological tissue pH of 7.4. Ab initio and DFT/B3LYP calculations were performed for 12 protonated conformers of (R)-norepinephrine in the gas phase with geometry optimizations up to the MP2/6-311++G level, and with single-point calculations up to the QCISD(T) level at the HF/6-31G-optimized geometries. Four monohydrates were studied at the MP2/6-31G//HF/6-31G level. In the gas phase, the G1 conformer is the most stable with phenyl.NH(3)(+) gauche and HO(alc).NH(3)(+) gauche arrangements. A strained intramolecular hydrogen bond was found for conformers (G1 and T) with close NH(3)(+) and OH groups. Upon rotation of the NH(3)(+) group as a whole unit about the C(beta)-C(alpha) axis, a 3-fold potential was calculated with free energies for barriers of 3-12 kcal/mol at the HF/6-31G level. Only small deviations were found in MP2/6-311++G single-point calculations. A 2-fold potential was calculated for the phenyl rotation with free energies of 11-13 kcal/mol for the barriers at T = 310 K and p = 1 atm. A molecular mechanics docking study of (R)-norepinephrine in a model binding pocket of the beta-adrenergic receptor shows that the ligand takes a conformation close to the T(3) arrangement. The effect of aqueous solvation was considered by the free energy perturbation method implemented in Monte Carlo simulations. There are 4-5 strongly bound water molecules in hydrogen bonds to the conformers. Although hydration stabilizes mostly the G2 form with gauche phenyl.NH(3)(+) arrangement and a water-exposed NH(3)(+) group, the conformer population becomes T > G1 > G2, in agreement with the PMR spectroscopy measurements by Solmajer et al. (Z. Naturforsch. 1983, 38c, 758). Solvent effects reduce the free energies for barriers to 3-6 and 9-12 kcal/mol for rotations about the C(beta)-C(alpha) and the C(1)(ring)-C(beta) axes, respectively.     

Synthesis of constrained raloxifene analogues by complementary use of Friedel-Crafts and directed remote metalation reactions

New constrained heterocyclic analogues, 2a,b and 3, of Raloxifene (1) have been prepared by complementary Directed remote Metalation (DreM)/Friedel-Crafts cyclization approaches. Utilization of a benzylidene-thiolactone rearrangement was successfully implemented to construct benzothiophenes 13a-c in good yields. Selective deprotection of 13a and 13b induced by complexation followed by triflation gave 18 and 23, thereby allowing efficient Suzuki-Miyaura cross coupling with borolane 16 to give biaryls 19 and 24. Treatment of 19 with BCl(3) induced an intramolecular para Fridel-Crafts cyclization and concomitant double deprotection to furnish analogue 2a, a new 5,6,6,6-(C(4)S-C(6)-C(6)-C(6)) sulfur-containing heterocycle. Exposure of 25 with excess LDA induced a DreM cyclization delivering the ortho-substituted 5,6,6,6-(C(4)S-C(6)-C(6)-C(6)) heterocylic analogue 26 in 70% yield. Similar treatment of 13c and 27 afforded 30, representing the novel 5,5,6,6-(C(4)S-C(5)-C(6)-C(6)) ring system, which was subjected to Suzuki-Miyaura cross coupling with 16 to give the biaryl 31 in 93% yield; deprotection furnished the final constrained analogue 3.     

Experimental and theoretical analyses of azulene synthesis from tropones and active methylene compounds: reaction of 2-methoxytropone and malononitrile

A representative azulene formation from an active troponoid precursor (2-methoxytropone) and an active methylene compound (malononitrile) has been analyzed both experimentally and theoretically. (2)H-Tracer experiments using 2-methoxy[3,5,7-(2)H(3)]tropone (2-d(3)) and malononitrile anion give 2-amino-1,3-dicyano[4,6,8-(2)H(3)]azulene (1-d(3)) in quantitative yield. New and stable (2)H-incorporated reaction intermediates have been isolated, and main intermediates have been detected by careful low-temperature NMR measurements. The detection has been guided by mechanistic considerations and B3LYP/6-31(+)G(d) calculations. The facile and quantitative one-pot formation of azulene 1 has been found to consist of a number of consecutive elementary processes: (a) The troponoid substrate, 2-methoxytropone (2), is subject to a nucleophilic substitution by the attack of malononitrile anion (HC(CN)(2)(-)) to form a Meisenheimer-type complex 3, which is rapidly converted to 2-troponylmalononitrile anion (5). (b) The anion 5 is converted to an isolable intermediate, 2-imino-2H-cyclohepta[b]furan-3-carbonitrile (6), by the first ring closure in the reaction. (c) A nucleophilic addition of the second HC(CN)(2)(-) toward the imine 6 at the C-8a position produces the second Meisenheimer-type adduct 7. (d) The second ring closure leads to 1-carbamoyl-1,3-dicyano-2-imino-2,3-dihydroazulene (11). A base attacks the imine 11, which results in generation of a conjugate base 12 of the final product, azulene 1.