Structure-selective synthesis of mesostructured/mesoporous silica nanofibers

Well-ordered mesostructured/mesoporous silica nanofibers have been synthesized in a quiescent dilute aqueous cationic surfactant/silica precursor reaction mixture under strong acidic conditions. These nanofibers have diameters ranging from 50 to 300 nm and lengths up to millimeters. Transmission electron microscopy (TEM) studies show that the nanofibers exhibit either a circular architecture with the pore channels running in a circular direction around the fiber axis or a longitudinal architecture with the pore channels running parallel to the fiber axis. The pore channels in both arrangements are hexagonally packed. The circular or longitudinal architecture can be selectively obtained during synthesis by varying reaction temperature or using inorganic salts as additives.     

Reproducibility and scalability of solvent-free microwave-assisted reactions: from domestic ovens to controllable parallel applications

The heating of different parallel arrays in domestic ovens offers the possibility to perform multiple reactions in one irradiation experiment, blending the advantages of microwave heating technology and parallel chemistry. However, they are usually performed without an appropriate temperature control; thus, reproducibility becomes a major issue limiting the application of such reactions. This is exemplified when working at a different scales or using different instruments. For the first time a typical solvent-free reaction described in a domestic oven has been reproduced in monomode reactor, scaled up in a controlled multimode oven and reproduced in parallel, 24 reactions were carried out in a well plate. Parallel reactions were performed in a Weflon multiwell plate to assure identical conditions for each individual reaction. As many reactions under microwave irradiation have been performed in solvent-free conditions, this result opens new possibilities in reproducibility, scalability and combinatorial chemistry and permits to take advantage of many synthetic procedures described in domestic ovens.     

A Better Understanding of the Formation of Silica Nanococoons

Silica nanococoons with coiled or concentric circular pore channels in the walls attracted much attention, recently. However, the formation of them is not well illustrated. Herein, hollow silica shells with organized pore channels parallel to the shell surface were prepared through a single‐templating method using the self‐assemblies of a chiral low‐molecular‐weight amphiphile,L‐18Phe6PyBr, as templates under a dilute concentration. These nanococoons were characterized using X‐ray diffractometer and N₂ sorption. The formation of them was clearly shown in the field‐emission electron microscopy images which were taken at a low voltage. Moreover, transmission electron microscopy images taken after different reaction times indicated a cooperative self‐assemble mechanism. It was also found that the nanocoons were formed from coiled nanoribbons.     

Spectroscopic characterization of the oxo-transfer reaction from a bis(mu-oxo)dicopper(III) complex to triphenylphosphine

The oxygen-atom transfer reaction from the bis(mu-oxo)dicopper(III) complex [Cu(III)(2)(mu-O)(2)(L)(2)](2+), where L =N,N,N',N' -tetraethylethylenediamine, to PPh(3) has been studied by UV-vis, EPR, (1)H NMR and Cu K-edge X-ray absorption spectroscopy in parallel at low temperatures (193 K) and above. Under aerobic conditions (excess dioxygen), 1 reacted with PPh(3), giving O=Ph(3) and a diamagnetic species that has been assigned to an oxo-bridged dicopper(II) complex on the basis of EPR and Cu K-edge X-ray absorption spectroscopic data. Isotope-labeling experiments ((18)O(2)) established that the oxygen atom incorporated into the triphenylphosphine oxide came from both complex 1 and exogenous dioxygen. Detailed kinetic studies revealed that the process is a third-order reaction; the rate law is first order in both complex 1 and triphenylphosphine, as well as in dioxygen. At temperatures above 233 K, reaction of 1 with PPh(3) was accompanied by ligand degradation, leading to oxidative N-dealkylation of one of the ethyl groups. By contrast, when the reaction was performed in the absence of excess dioxygen, negligible substrate (PPh(3)) oxidation was observed. Instead, highly symmetrical copper complexes with a characteristic isotropic EPR signal at g= 2.11 were formed. These results are discussed in terms of parallel reaction channels that are activated under various conditions of temperature and dioxygen.     

A DFT study on the 1,3-dipolar cycloaddition reactions of C-(methoxycarbonyl)-N-methyl nitrone with methyl acrylate and vinyl acetate

In the 1,3-dipolar cycloaddition of glyoxylic nitrones with electron-poor and electron-rich alkenes, the configurational instability of the nitrone leads to parallel models when regio- and stereoselectivities are rationalized. The energetics of the cycloaddition reactions have been investigated through molecular orbital calculations at the B3LYP/6-31-G(d) theory level. By studying different reaction channels and reagent conformations, leading to a total of sixteen transition structures for each dipolarophile, the regio- and stereochemical preferences of the reaction are discussed.     

High-throughput enzyme assay on a multichannel microchip using optically gated sample introduction

To meet the requirements for high-throughput screening for drug discovery research, it is very important to develop techniques with the ability of performing multiple enzyme assays simultaneously. Using optically gated sample introduction on a multichannel microchip, multiple enzyme assays have been demonstrated in four parallel channels. The hydrolysis of fluorescein mono-beta-D-galactopyranoside by beta-galactosidase and the inhibition of this reaction by the competitive inhibitor phenylethyl beta-D-thiogalactoside were initially studied to determine the effect of system movement using the voice coil actuator on the enzyme assay reaction. The results from these two studies are consistent with the results from the assay using a single-channel microchip, and they demonstrate that the system using optically gated sample introduction on multichannel microchip can be used to perform multiple enzyme assays. Three unique enzyme assays were also performed in different channels, which show this technique could be competitive for high-throughput screening in drug discovery with other traditional techniques.     

Theoretical explanation of nonexponential OH decay in reactions with benzene and toluene under pseudo-first-order conditions

OH radical reactions with benzene and toluene have been studied in the 200-600 K temperature range via the CBS-QB3 quantum chemistry method and conventional transition-state theory. Our study takes into account all possible hydrogen abstraction and OH-addition channels, including ipso addition. Reaction rates have been obtained under pseudo-first-order conditions, with aromatic concentrations in large excess compared to OH concentrations, which is the case in the reported experiments as well as in the atmosphere. The reported results are in excellent agreement with the experimental data and reproduce the discontinuity in the Arrhenius plots in the 300 K < T < 400 K temperature range. They support the suggestion that the observed nonexponential OH decay is caused by the existence of competing addition and abstraction channels and by the decomposition of thermalized OH-aromatic adducts back to reactants. We also find that the low-temperature onset of the nonexponential decay depends on the concentration of the aromatic compounds and that the lower the concentration, the lower the temperature onset. Under atmospheric conditions, nonexponential decay was found to occur in the 275-325 K range, which corresponds to temperatures of importance in tropospheric chemistry. Branching ratios for the different reaction channels are reported. We find that for T > or = 400 K the reaction occurs exclusively by H abstraction. At 298 K, ipso addition contributes 13.0% to the overall OH + toluene reaction, while the major products correspond to ortho addition, which represents 43% of all possible channels.     

One-step synthesis of 2,3-difluoronaphthalene by the gas-phase co-pyrolysis of styrene with chlorodifluoromethane

Russian Chemical Bulletin - The gas-phase co-pyrolysis of styrene with CHClF2 in a flow reactor at 550–650 °C gives 2,3-difluoronaphthalene in two parallel reaction channels. The main...     

Analysis of the Apollo 16 Free-Fluid Electrophoresis Experiment

The Apollo 16 free-fluid electrophoresis experiment attempted the separation in microgravity of two different-size monodisperse polystyrene latexes under conditions that would give a completely roiled sample on earth because of the thermal convection. The instrument comprised three parallel 0. 63-cm inside diameter 10. 2-cm long Lexan polycarbonate electrophoresis channels, with ted from the channel by semipermeable membranes. The latex samples were contained in cylindrical chambers separated from the electrode by a fixed semipermeable membrane and from the Lexan tube by a movable Kapton polyimide film. Two channels contained 0. 80μm- and 0. 23μ-diameter monodisperse polystyrene latexes and the third, a mixture of the two sizes. The experiment was initiated in microgravity by removing the Kapton films which separated the latex samples from the electrophoresis channels and applying a potential of 300 volts across the electrodes. The results were recorded by photographs taken every 20 seconds.     

Parallel nanoliter detection of cancer markers using polymer microchips

A general multipurpose microchip technology platform for point-of-care diagnostics has been developed. Real-time nucleic acid sequence-based amplification (NASBA) for detection of artificial human papilloma virus (HPV) 16 sequences and SiHa cell line samples was successfully performed in cyclic olefin copolymer (COC) microchips, incorporating supply channels and parallel reaction channels. Samples were distributed into 10 parallel reaction channels, and signals were simultaneously detected in 80 nl volumes. With a custom-made optical detection unit, the system reached a sensitivity limit of 10(-6) microM for artificial HPV 16 sequences, and 20 cells microl(-1) for the SiHa cell line. This is comparable to the detection limit of conventional readers, and clinical testing of biological samples in polymer microchips using NASBA is therefore possible.     

Reactivity of oxide precursor states on Ru(0001)

Smooth and defect-rich Ru(0001) surfaces prepared under ultrahigh-vacuum (UHV) conditions have been loaded with oxygen under high-pressure (p 相似文献   

滑动弧放电等离子体分解甲醇制氢

对常温常压下滑动弧放电等离子体直接分解甲醇进行了研究,探讨了载气流量、甲醇浓度、电极间距、输入电压和气化室温度等实验参数的影响。结果表明,不同操作条件导致甲醇转化率由51%升高到81.7%,氢气和一氧化碳的选择性之比基本保持一个固定值。除了氢气和一氧化碳,产物中还检测到了少量的甲烷和C₂不饱和烃以及痕量二氧化碳。不同于传统的甲醇热分解机理,提出了滑动弧放电等离子体甲醇分解的制氢路径。     

Generation of stable complex gradients across two-dimensional surfaces and three-dimensional gels

Many chemical and biological processes are dependent on molecular gradients. We describe a new microfluidic approach that can be used to produce spatiotemporal gradients across two-dimensional surfaces and three-dimensional gels under flow-free conditions. Free diffusion between dynamically replenished flow channels acting as a sink and source is utilized to give rise to stable steady-state gradient profiles. The gradient profile is dictated by the engineered design of the device's gradient-generating region. Different designs can yield both linear and non-linear gradients of varying profiles. More complex gradients can be made by juxtaposing different designs within a single gradient-generating region. By fabricating an array of designs along the gradient-generating region, different gradient profiles can be generated simultaneously, allowing for parallel analysis. Additionally, simple methods of localizing gels into microdevices are demonstrated. The device was characterized by experimentally obtained gradient profiles of fluorescent molecules that corroborated closely with a simulated finite element model.     

Studies on the chemical stability and synthetic utility of an oxazolidine linker for solid-phase chemistry

A chemical stability study on the oxazolidine linker system has been carried out using a dual-linker analytical construct within a parallel reaction scan. The study established the compatibility of the oxazolidine platform with a wide range of commonly employed synthetic reaction conditions including nucleophilic, oxidizing, and reducing conditions. The scan was further used to probe and optimize acidic conditions under which the oxazolidine could release the substrate from the solid-support and to identify reagents that could cleave while retaining other acid-labile groups. The solid-phase synthesis of a small molecular array established the utility of oxazolidine aldehyde 1 as a building block for asymmetric chemistry while exploiting the data generated by the reaction scan.     

“Dead zone” in a porous catalyst granule for a nonstationary parallel reaction

The quasi-homogeneous model was used to study the “dead zone” in porous catalyst granules of spherical, cylindrical, and platelike shapes for parallel catalytic reaction with the Langmuir-Hinshelwood kinetics that occur under transient or artificially created nonstationary conditions.     

STEPS IN THE POPULATION OF THE EMITTER IN THE BACTERIAL LUCIFERASE REACTION

Abstract— The reaction of luciferase-bound flavin hydroperoxide with both I-¹H and 1–²H decanal has been examined at 2°C in both low (0.01 M ) and high (0.35 M ) phosphate buffer, pH 7, where the kinetics and deuterium isotope effects are quite different. Upon reaction in both buffers there are rapid (<2 ms) increases in absorption at both 380 and W nm, followed by decay over the subsequent seconds and minutes. The changes at 380 nm exhibit a primary isotope effect and are rapid compared to bioluminescence, indicating that the scission of the aldehyde C — H bond occurs prior to the step responsible for populating the electronically excited state. However, the final absorbance change at 600 nm decays in parallel to bioluminescence under the several different conditions studied, suggesting the involvement of a long-wavelength absorbing flavin species in the production of, the excited state. Evidence is also presented indicating that under certain conditions there may be two (sequential) steps, each of which exhibits a primary isotope effect involving the same H atom.     

Efficient synthesis of 4-aminoquinazoline and thieno[3,2-d]pyrimidin-4-ylamine derivatives by microwave irradiation

[reaction: see text] A simple, efficient, and high-yielding synthesis of quinazolin-4-ylamine and thieno[3,2-d]pyrimidin-4-ylamine derivatives is reported under microwave irradiation conditions. Reaction conditions including temperature, solvent, and reaction time have been studied. An efficient parallel workup procedure was developed to generate a small library (23 compounds) in a short time period.     

Kinetic study of the reaction of triphenylphosphine with acrylic acid in alcohol media

Kinetic study of the reaction of triphenylphosphine with acrylic acid in alcohol media was carried out by spectrophotometric method. Use of alcohols as solvents is shown to introduce a specific feature in the kinetic picture of the reaction due to the appearance of parallel channels of proton transfer: from alcohol and from another molecule of acrylic acid in the solution.     

Complex rate constant for an electrochemical system involving an adsorbed intermediate

Two different methods of obtaining the impedance of a system involving an electrochemical reaction with an adsorbed intermediate are compared. The earlier method combines in parallel an impedance derived separately for the overall reaction with that for the rest of the system. It is appropriate for a fully supported electrolyte system but seems much less applicable to the unsupported situation. In contrast, the method derived and discussed herein involves complex reaction rate constants which may be directly incorporated in expressions for the total system impedance. This method may, therefore, be applied to either supported or unsupported situations. Several specific cases of the general complex rate constant results are discussed, particularly, various frequency dependencies possible. The overall small-signal impedance may be inductive in some parts of the frequency range and the low frequency limiting differential resistance negative, zero, or positive under various conditions.     

The adequacy of the observed kinetic order in catalyst and the differential selectivity patterns to the hypothesis of the cooperative mechanism of catalysis of the Suzuki—Miyaura reaction

The generally accepted mechanism of the Suzuki—Miyaura reaction suggests a sequential activation of the substrate (aryl halide) and the reagent (arylboronic acid) by a palladium catalyst with the formation of unsymmetric biaryl as a result of a single turnover of the catalytic cycle, i.e., it is linear from the kinetic point of view. At the same time, the use of an unconventional kinetic approach based on the analysis of the differential selectivity of the reaction, rather than the regularities of catalytic activity, indicates the inadequacy of the linear mechanism, that is consistent with the hypothesis of a nonlinear (the so-called cooperative) mechanism of catalysis, in which the product is formed as a result of the substrate and reagent activation by two different palladium-containing intermediates in two parallel catalytic cycles. The experimentally observed low kinetic orders of the Suzuki—Miyaura reaction with respect to the concentration of the palladium catalyst precursor under the ligand-free conditions of catalysis are also consistent with the cooperative mechanism and can be due to the changes in the relative amount of the catalyst in two parallel catalytic cycles and/or to the process of catalyst deactivation.