Hierarchical superstructures with control of helicity from the self-assembly of chiral bent-core molecules

Herein, two asymmetric chiral bent-core molecules, 3-[(4-{[4-(heptyloxy)benzoyl]oxy}benzoyl)oxy]-phenyl-4-[(4-{[(1R)-1-methylheptyl]oxy}benzoyl)oxy] benzoate (BC7R) and 3-[(4-{[4-(heptyloxy)benzoyl]oxy}benzoyl)oxy]-phenyl-4-[(4-{[(1S)-1-methylheptyl]oxy}benzoyl)oxy] benzoate (BC7S), were synthesized to demonstrate control of the helicity of their self-assembled hierarchical superstructures. Mirror-imaged CD spectra showed a split-type Cotton effect after the formation of self-assembled aggregates of BC7R and BC7S, thereby suggesting the formation of intermolecular exciton couplets with opposite optical activities. Both twisted and helical ribbons with preferential helicity that corresponded to the twisting character of the intermolecular exciton couplet were found in the aggregates. The formation of helical ribbons was attributed to the merging of twisted ribbons through an increase in width to improve morphological stability. As a result, control of the helicity of hierarchical superstructures from the self-assembly of bent-core molecules could be achieved by taking advantage of the transfer of chiral information from the molecular level onto the hierarchical scale.     

Synthesis and heteronuclear inclusion properties of a novel thiacalix[4]arene-based hard-soft receptor with 1,3-alternate conformation

A novel thiacalix[4]arene ditopic receptor with 1,3-alternate conformation and possessing two complexation sites for hard and soft cations, 5,11,17,23-tetra-tert-butyl-25,27-bis[(N,N-diethylaminocarbonyl)methoxy]-26,28-bis[(pyridylmethyl)oxy]-2,8,14,20-tetrathiacalix[4]arene is prepared. Regioselective synthesis of distal-bis[(N,N-diethylaminocarbonyl)methoxy]thiacalix[4]arene is accomplished by a protection-deprotection method using benzyl groups as a protecting group. The deprotection of benzyl group was succeeded in the presence of solid superacid (Nafion-H) under refluxing benzene. Its complexation behavior is examined by ¹H-NMR titration experiments. The formation of 1:2 homo- and heteronuclear complexes demonstrates that the preorganization, subtle conformational changes and affinity have a pronounced effect on the complexation of the receptor.     

Design of molecular architectures for polymeric mesophase formation

Based on the tendency of low molar mass liquid crystals composed of extended mesogens symmetrically disubstituted with long n-alkoxy substituents to exhibit smectic C mesophases, we have proposed that SCLCPs with laterally attached (vs. terminally attached) mesogens offer an ideal architecture for obtaining s_C* mesophases. In particular, mesogens that typically form the desirable s_C*-n phase sequence can be laterally attached to the polymer backbone through a chiral spacer, which should result in high values of spontaneous polarization. Not only are we using mesogens which exhibit s_C*-n phase sequences, we are also attempting to induce smectic layering into systems which typically form nematic mesophases by using immiscible hydrocarbon/fluorocarbon components and electron-donor-acceptor interactions. Thus far, the thermotropic behavior of poly{5-[[[2', 5'-bis[(3″-fluoro-4″-dimethoxyphenyl)ethynyl]benzyl]oxy]carbonyl[2.2.1]hept-2-ene]s and poly(5-[[[2',5'-bis[(3″-fIuoro-4″-methoxybenzoyl)oxy]benzyl]oxy]carbonyl]-bicyclo[2.2.1]hept-2-ene)s correspond to that of their low molar mass analogs. Preliminary results demonstrate that smectic layering is successfully induced in 2,5-bis[(4'-n-alkoxybenzoyl)oxy]toluenes and polynorbornenes with laterally attached 2,5-bis[(4'-n-alkoxybenzoyl)oxy]benzyl mesogens by terminating the n-alkoxy substituents with perfluorinated segments.     

Hydroxydialkylamino cruciforms: amphoteric materials with unique photophysical properties

Two amphoteric cruciforms 6 and 7 (XF; 4,4'-[(1E,1'E)-(2,5-bis{[4-(dibutylamino)phenyl]ethynyl}-1,4-phenylene)bis(ethene-2,1-diyl)]diphenol, 4,4'-[{2,5-bis[(E)-4-(dibutylamino)styryl]-1,4-phenylene}bis(ethyne-2,1-diyl)]diphenol) were prepared by a Horner reaction followed by a Sonogashira coupling and subsequent deprotection. The XFs display significant changes in absorption and emission when exposed to trifluoroacetic acid, tetrabutylammonium hydroxide, and metal triflates. The substitution pattern of 6 and 7 leads to spatial separation of the frontier molecular orbitals, which allows the HOMO or LUMO of the XF to be addressed independently by acidic or basic agents. XF 6, which has hydroxyl groups on the styryl axis, displays changes in emission color upon exposure to ten amines in eight different solvents. The change in fluorescence upon the addition of amines was analyzed by linear discriminant analysis. These XFs may have potential in sensor applications for metal cations and amines.     

Asymmetric Synthesis and DNA Intercalation of (-)-6-[[(Aminoalkyl)oxy]methyl]-4-demethoxy-6,7- dideoxydaunomycinones(1)(,)

The BF(3).Et(2)O-promoted Diels-Alder addition of 1-acetylvinyl RADO(Et)-ate (RADO(Et)-ate = 3-ethyl-2-oxo-6,8-dioxa-3-azabicyclo[3.2.1]octane-7-exo-carboxylate) to 1-(dimethoxymethyl)-2,3,5,6-tetramethylidene-7-oxabicyclo[2.2.1]heptane led to one major monoadduct that added to 1,2-didehydrobenzene and was converted into (-)-4-demethoxy-7-deoxydaunomycinone and (2R)-12-acetoxy-2-acetyl-5-(bromomethyl)-1,2,3,4-tetrahydronaphthacen-2-yl RADO(Et)-ate. The latter compound was used to construct (8R)-8-acetyl-6,8-dihydroxy-11-[[(3'-[(aminopropyl)oxy]-, -4'-[(aminobutyl)oxy], and -5'-[(aminopentyl)oxy]methyl]-7,8,9,10-tetrahydronaphthacene-5,12-dione hydrochloride (-)-8, (-)-9, (-)-10, respectively, as well as (8R)-8-acetyl-6,8-dihydroxy-11- [[[2'-[(3"-aminopropyl)amino]ethyl]oxy]- ((-)-11) and -[[3'-[(3"-aminopropyl)amino]propyl]oxy]methyl]-7,8,9, 10-tetrahydronaphthacene-5,12-dione hydrochloride ((-)-12). (8R)-8-Acetyl-6,8-dihydroxy-11-[[(alpha-L-daunosaminyl)oxy]methyl]-7,8,9,10-tetrahydronaphthacene-5,12-dione hydrochloride ((-)-13), a mimic of idarubicin, was also prepared. Absorbance and fluorescence titration experiments showed (-)-8, (-)-9, and (-)-10 to intercalate calf thymus DNA whereas (-)-11, (-)-12, and (-)-13 did not. The best intercalator was (-)-9 (K(b) = (1.1 +/- 0.1) x 10(5) M(-)(1)) with the [(4'-aminobutyl)oxy]methyl chain. Inhibition of topoisomerase II-induced DNA strand religation was observed for (-)-8 at a concentration of 50 &mgr;M.     

Hierarchical Superstructures with Control of Helicity from the Self‐Assembly of Chiral Bent‐Core Molecules

Herein, two asymmetric chiral bent‐core molecules, 3‐[(4‐{[4‐(heptyloxy)benzoyl]oxy}benzoyl)oxy]‐phenyl‐4‐[(4‐{[(1R)‐1‐methylheptyl]oxy}benzoyl)oxy] benzoate (BC7R) and 3‐[(4‐{[4‐(heptyloxy)benzoyl]oxy}benzoyl)oxy]‐phenyl‐4‐[(4‐{[(1S)‐1‐methylheptyl]oxy}benzoyl)oxy] benzoate (BC7S), were synthesized to demonstrate control of the helicity of their self‐assembled hierarchical superstructures. Mirror‐imaged CD spectra showed a split‐type Cotton effect after the formation of self‐assembled aggregates of BC7R and BC7S, thereby suggesting the formation of intermolecular exciton couplets with opposite optical activities. Both twisted and helical ribbons with preferential helicity that corresponded to the twisting character of the intermolecular exciton couplet were found in the aggregates. The formation of helical ribbons was attributed to the merging of twisted ribbons through an increase in width to improve morphological stability. As a result, control of the helicity of hierarchical superstructures from the self‐assembly of bent‐core molecules could be achieved by taking advantage of the transfer of chiral information from the molecular level onto the hierarchical scale.     

Molecular design of lipophilic disalicylic acid compounds with varying spacers for selective lead(II) extraction

Lipophilic disalicylic acids 5,5'-decyl-2,2'-[1,2-ethanediylbis(oxy)]bisbenzoic acid (1), 5,5'-decyl-2,2'-[1,3-propanediylbis(oxy)]bisbenzoic acid (2), 5,5'-decyl-2,2'-[oxybis(1,2-ethanediyl-oxy)]bisbenzoic acid (3), 3,5-bis[2'-(2'-carboxyphenoxy)ethyl]-4-oxahexacyclo-[5.4.1.0(2,6).0(3,10).0(5,9).0(8,11)]dodecane (4), and 1,3-bis[2'-(2'-carboxyphenoxy)ethyl]adamantane (5) are evaluated as selective Pb(II) extractants. The solvent extraction of Pb(II) and of Cu(II) from buffered aqueous solutions of varying pH into chloroform by ligands 1-5 is examined in relation to the molecular structure of the dicarboxylic acid extractant. Ligand 1, with an ethylene spacer between two lipophilic salicylic acid units, exhibits excellent extraction selectivity for Pb(II) over Cu(II). Lengthening the spacer in ligands 2 and 3 diminishes both the extraction efficiency and selectivity. Ligands 4 and 5, with rigid spacer units, show significant reductions in both Pb(II) and Cu(II) extraction. Slope analysis reveals that ligand 1 reacts in a 2:1 stoichiometry with Pb(II) in extraction, which differs from the 1:1 stoichiometries for 2 and 3. The differences in the half extraction pH (DeltapH(1/2)) values for Pb(II) and Cu(II) extraction are 1.29, 0.49, and 0.48 for 1-3, respectively.     

新型亲水性共轭聚合物的制备及光催化制氢性能

制备了聚({4,8-双[(2,5,8,11,14,17,20-七氧二十二烷-22-基)氧基]苯并[1,2-b∶4,5-b']二噻吩}-交替-[2,5-二(噻唑-2-基)吡嗪])(P7O-2N-2N)和聚({4,8-双[(2,5,8,11,14,17,20-七氧二十二烷-22-基)氧基]苯并[1,2-b∶4,5-b']二噻吩}-交替-[3,6-双(5-溴-2-噻吩基)-1,2,4,5-四嗪])(P7O-4N)2个亲水性共轭聚合物, 通过调节主链含氮杂环上氮原子的位置, 系统研究了主链结构对材料吸收光谱、 能级、 氢结合自由能及光催化性能的影响. 研究发现, 与P7O-2N-2N相比, P7O-4N表现出更强的链间聚集、 更低的氢结合自由能及更好的光催化制氢性能.     

Synthesis of poly(ester amide)s by the melt polycondensation of semiaromatic polyesters with ethanolamine and their characterization

Semiaromatic poly(ester amide)s (PEAs) were synthesized by the melt polycondensation of ethanolamine (EA) derivatives with dimethyl terephthalate and ethylene glycol in the presence of tetrabutyl titanate as a catalyst, and their crystallization and thermal properties were investigated. The introduction of an amide group into a semiaromatic polyester such as poly(ethylene terephthalate) (PET) produced PEAs (EA-modified PET polymers) with an increase in the melting point. However, these PEAs were found to decompose at a lower temperature than PET on the basis of TGA. Moreover, direct pyrolysis/mass spectrometry measurements suggested that an initial step of the thermal decomposition was a β-CH hydrogen-transfer reaction via asix-member ring transition state at the ester–ethylene–amide unit, at which carbon–oxygen bond scission took place to yield carboxyl and N-vinylamide end groups. Furthermore, molecular orbital calculations using trimer models bis[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]terephthalate, N-[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]-4-[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyloxycarbonyl]benzamide, and N,N′-bis[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]terephthalamide strongly supported the idea that the β-CH hydrogen-transfer reaction in the thermal decomposition of PEAs might occur more easily at the methylene group next to the amide group in an ester–ethylene–amide unit rather than at the methylene group next to the ester group in an ester–ethylene–ester unit. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2184–2193, 2007     

Synthesis of chiral hydroxyl phospholanes from D-mannitol and their use in asymmetric catalytic reactions

Chiral hydroxyl monophosphane 3 [(2S,3S,4S,5S)-3,4-dihydroxy-2, 5-dimethyl-1-phenylphospholane] and bisphospholanes 5a [1,2-bis[(2S, 3S,4S,5S)-3,4-dihydroxy-2,5-dimethylphospholanyl]benzene] and 5b [1, 2-bis[(2S,3S,4S,5S)-2,5-diethyl-3,4-dihydroxyphospholanyl]benzene] were synthesized from readily available D-mannitol in high yields. Strategies for protection and deprotection of OH-groups in the presence of phosphines have been explored. Rate acceleration in the Baylis-Hillman reaction was observed when a hydroxyl phosphine was used as the catalyst. Rhodium complexes with chiral bisphospholanes are highly enantioselective catalysts for the asymmetric hydrogenation of various kinds of functionalized olefins such as dehydroamino acid derivatives, itaconic acid derivatives, and enamides. An interesting feature of the hydroxyl phospholane system is that hydrogenation of some substrates can be carried out in water with >99% ee and 100% conversion (e.g., itaconic acid).     

Decoupling optical and potentiometric band gaps in pi-conjugated materials

Syntheses, optical spectroscopy, potentiometric studies, and electronic structural calculations are reported for two classes of conjugated (porphinato)metal oligomers that feature a meso-to-meso ethyne-bridged linkage topology. One set of these systems, bis[(5,5'-10,20-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]ethyne (DD), 5,15-bis[[5'-10',20'-bis[3,5-di(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]ethynyl]-10,20-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II) (DDD), and 5,15-bis[[15' '-(5'-10',20'-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]-[(5' '-10' ',20' '-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II)]ethyne]ethynyl]-10,20-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II) (DDDDD), constitute highly soluble analogues of previously studied examples of this structural motif having simple 10,20-diaryl substituents, while a corresponding set of conjugated oligomers, [(5-10,20-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]-[(5'-15'-ethynyl-10',20'-bis[10,20-bis(heptafluoropropyl)porphinato)zinc(II)]ethyne (DA), 5,15-bis[[5'-10',20'-bis[3,5-di(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]ethynyl]-10,20-bis(heptafluoropropyl)porphinato]zinc(II) (DAD), and 5,15-bis[[15' '-(5'-10',20'-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]-[(5' '-(10' ',20' '-bis(heptafluoropropyl)porphinato)zinc(II)]ethyne]ethynyl]-10,20-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II) (DADAD), features alternating electron-rich and electron-poor (porphinato)zinc(II) units. Electrooptic and computational data for these species demonstrate that it is possible to engineer conjugated oligomeric structures that possess highly delocalized singlet (S1) excited states yet manifest apparent one-electron oxidation and reduction potentials (E1/20/+ and E1/2-/0 values) that are essentially invariant with respect to those elucidated for their constituent monomeric precursors.     

Chiral Cyclopentane-Based Mimics of D-myo-Inositol 1,4,5-Trisphosphate from D-Glucose

Two routes from D-glucose to chiral, ring-contracted analogs of the second messenger D-myo-inositol 1,4,5-trisphosphate are described. Methyl alpha-D-glucopyranoside was converted by an improved procedure into methyl 4,6-O-(p-methoxybenzylidene)-alpha-D-glucopyranoside (6) and thence into methyl 2-O-benzyl-3,4-bis-O-(p-methoxybenzyl)-alpha-D-gluco-hexodialdopyranoside (1,5) (14) in four steps. In the first ring-contraction method 14 was converted into methyl 2-O-benzyl-6,7-dideoxy-3,4-bis-O-(p-methoxybenzyl)-alpha-D-gluco-hept-6-enopyranoside (1,5) (15), which on sequential treatment with Cp(2)Zr(n-Bu)(2) followed by BF(3).Et(2)O afforded a mixture of (1R,2S,3S,4R,5S)-3-(benzyloxy)-4-hydroxy-1,2-bis[(p-methoxybenzyl)oxy]-5-vinylcyclopentane (16) and its 4S,5R diastereoisomer 17. Removal of the p-methoxybenzyl groups of 16 and subsequent phosphorylation and deprotection afforded the first target compound, (1R,2R,3S,4R,5S)-3-hydroxy-1,2,4-tris(phosphonooxy)-5-vinylcyclopentane (3). In the second route, intermediate 14 was subjected to SmI(2)-mediated ring contraction to give (1R,2S,3S,4R,5S)-3-(benzyloxy)-4-hydroxy-5-(hydroxymethyl)-1,2-bis[(p-methoxybenzyl)oxy]cyclopentane (20). Benzylation of 20 provided (1R,2S,3S,4R,5S)-3-(benzyloxy)-6-[(benzyloxy)methyl]-4-hydroxy-1,2-bis[(p-methoxybenzyl)oxy]cyclopentane (22) and (1R,2S,3S,4R,5S)-3,4-bis(benzyloxy)-5-(hydroxymethyl)-1,2-bis[(p-methoxybenzyl)oxy]cyclopentane (21), which were elaborated to the target trisphosphates (1R,2R,3S,4R,5S)-3-hydroxy-5-(hydroxymethyl)-1,2,4-tris(phosphonooxy)cyclopentane (4) and (1R,2S,3R,4R,5S)-1,2-dihydroxy-3,4-bis(phosphonooxy)-5-[(phosphonooxy)methyl]cyclopentane (5), respectively. Both 3 and 4 mobilized intracellular Ca(2+), but 4 was only a few fold less potent than D-myo-inositol 1,4,5-trisphosphate, demonstrating that effective mimics can be designed that do not bear a six-membered ring.     

Synthesis of 1,3-bis[(3,5-di-tert-butyl-4-oxocyclohexa-2,5-dienylidene)(dimethoxyphosphoryl)methyl]-4,6-dimethoxybenzene

A reaction of 1,3-dimethoxybenzene with dimethyl (3,5-di-tert-butyl-4-oxocyclohexa-2,5-dienylidenemethyl)phosphonate gave rise to 1,3-bis[(3,5-di-tert-butyl-4-hydroxyphenyl)-(dimethoxyphosphoryl)methyl]-4,6-dimethoxybenzene, which was oxidized to 1,3-bis[(3,5-di-tert-butyl-4-oxocyclohexa-2,5-dienylidene)(dimethoxyphosphoryl)methyl]-4,6-dimethoxy-benzene.     

Ein neuer synthetischer Zugang zu Ubichinonen

A New Synthetic Route to Ubiquinones Ubiquinones 11 have been prepared employing a new strategy: as key step, the Diels-Alder reaction of 1,1,2-trichloroethene 3 with 2,5-bis[(trimethylsilyl)oxy]-3-methylfuran ( 2 ) has been used for the construction of the quinone part. After methanolysis of the [4 + 2] adducts 4a/4b , further reaction with cyclopentadiene and substitution of the Cl-atoms by MeO groups, the intermediate 7 is obtained. Diketone 7 can easily be alkylated with the desired polyprenyl side chain 9 (X = Br) using a strong base to yield, after a retro-Diels-Alder reaction, the corresponding ubiquinones 11 in high yields.     

Extreme electronic modulation of the cofacial porphyrin structural motif

The synthesis, electrochemistry, and optical spectroscopy of an extensive series of cofacial bis[(porphinato)zinc(II)] compounds are reported. These species were synthesized using sequential palladium-catalyzed cross-coupling and cobalt-mediated [2+2+2] cycloaddition reactions. This modular methodology enables facile control of the nature of macrocycle-to-macrocycle connectivity and allows unprecedented modulation of the redox properties of face-to-face porphyrin species. We report the synthesis of 5,6-bis[(5',5'-10',20'-bis[4-(3-methoxy-3-methylbutoxy)phenyl]porphinato)zinc(II)]indane (1), 5,6-bis[(2'-5',10',15',20'-tetraphenylporphinato)zinc(II)]indane (2), 5-([2'-5',10',15',20'-tetraphenylporphinato]zinc(II))-6-[(5"-10',20'-bis[4-(3-methoxy-3-methylbutoxy)phenyl]porphinato)zinc(II)]indane (3), 5-([2'-5',10',15',20'-tetrakis(trifluoromethyl)porphinato]zinc(II))-6-[(5' '-10' ',20' '-bis[4-(3-methoxy-3-methylbutoxy)phenyl]porphinato)zinc(II)]indane (4), 5-(2'-5',10',15',20'-[tetrakis(trifluoromethyl)porphinato]zinc(II))-6-[(2'-5',10',15',20'-tetraphenylporphinato)zinc(II)]indane (5), 5,6-bis([2'-5',15'-diphenyl-10',20'-(trifluoromethyl)porphinato]zinc(II))indane (6), and 5,6-bis([2'-5',10',15',20'-tetrakis(trifluoromethyl)porphinato]zinc(II))indane (7); 4-7 define the first examples of cofacial bis[(porphinato)metal] compounds in which sigma-electron-withdrawing perfluoroalkyl groups serve as macrocycle substituents, while 2, 6, and 7 constitute the first such structures that possess a beta-to-beta linkage topology. Cyclic voltammetric studies show that the electrochemically determined HOMO and LUMO energy levels of these cofacial bis(porphinato) complexes can be lowered by 780 and 945 mV, respectively, relative to the archetypal members of this class of compounds; importantly, these orbital energy levels can be modulated over well-defined increments throughout these wide potentiometric domains. Analyses of these cofacial bis[(porphinato)metal] potentiometric data, in terms of the absolute and relative frontier orbital energies of their constituent [porphinato]zinc(II) building blocks, as well as the nature of macrocycle-to-macrocycle connectivity, provide predictive electronic structural models that rationalize the redox behavior of these species.     

Azoles and Azines: CXIX. Alkylation of 5,5'-(4-Nitrobenzylidene)bis(2-thiobarbituric) Acid and 5-(4-Nitrophenyl)-2,8-dithioxo-5,7,8,9-tetrahydro-2H-pyrano[2,3-d:6,5-d']dipyrimidine-4,6(1H,3H)-dione with Haloacetic Acids and Their Esters

5,5'-(4-Nitrobenzylidene)bis(2-thiobarbituric) acid and 5-(4-nitrophenyl)-2,8-dithioxo-5,7,8,9-tetrahydro-2H-pyrano[2,3-d:6,5-d']dipyrimidine-4,6(1H,3H)-dione, similar to unsubstituted 2-thiobarbituric acid, readily react with haloacetic acids and their esters to form regioselectively the S-alkylation products. The alternative routes fo 5,5'-(4-nitrobenzylidene)bis[(4-hydroxy-6-oxo-1,6-dihydropyrimidine-5,2-diyl)sulfanyl]diacetic acids, based on condensation of 4,6-dihydroxypyrimidin-2-ylthioacetic acid with carbonyl compounds followed by cyclodehydration to [(5-(4-nitrophenyl)-4,6-dioxo-3,5,6,7-tetrahydro-4H-pyrano[2,3-d:6,5-d']dipyrimidine-2,8-diyl)di(sulfanyl)]diacetic acid derivatives, are less efficient. Alkylation of 2-thiobarbituric acid with ethyl bromoacetate in ethanol in the presence of alkali yields 5-(2-oxo-2,5-dihydro-1,3-thiazol-4-yl)-2-thiobarbituric acid.     

Synthesis of azoles based on N,N′-bis(hydrazinocarbonyl-ethyl)-1,4-phenylenediamine

N,N′-Bis[(1-methyl-3-oxobutylidene)hydrazinocarbonylethyl]-, N,N′-bis[(2,5-dimethylpyrrol-1-yl)carbamoylethyl]-, N,N′-bis(phenylureidocarbamoylethyl)-, N,N′-bis(phenylcarbamoyl)-, N,N′-bis(phenylureidocarbamoylethyl)-, and N,N′-bis[(4,5-dihydro-5-oxo-4-phenyl-1,2,4-triazol-3-yl)ethyl]-1,4-phenylene-diamines, and their thio analogs were obtained by the condensation of N,N′-bis-(hydrazinocarbonylethyl)-1,4-phenylenediamine with 2,4-pentanedione, 2,5-hexanedione, phenyl isocyanates, or phenyl isothiocyanates (with subsequent treatment of the obtained semicarbazides with alkali), and carbon disulfide respectively.     

Novel first-generation dendrimers on calix[4]resorcinol core equipped with multiple triazole units

Novel first-generation dendrimers on the calix[4]resorcinol core with four branches each containing multiple 1,2,3-triazole units have been synthesized in one-step by acid catalyzed condensation of resorcinols with a new aldehyde dendron, namely, 4-{3,5-bis[(1-benzyl-1H-1,2,3-triazol-4-yl)- methoxy]benzyloxy}benzaldehyde (obtained by alkyne–azide cycloaddition). The reaction proceeds stereoselectively to form rccc-diastereoisomers in high yields.     

A One-Pot Synthesis of Dimethyl 2,3-O-Benzylidene-L-tartrate from L-Tartaric Acid

An economical one-pot synthesis of (-)-dimethyl 2,3-O-benzylidene-L-tartrate [(4R, 5S)-4,5-bis(methoxycarbonyl)-2-phenyl-1,3-dioxolane] and its enantiomer from the corresponding tartaric acids is reported in 83-91% yield. The desired benzylidene tartrate is obtained by reaction of tartaric acid and benzaldehyde (1.5 equiv) in the presence of p-toluenesulfonic acid in methanol followed by the addition of 3 equiv of trimethyl orthoformate, which reacts with the water generated in the reaction.     

Reaction of phosphorylated 2,6-di-tert-butyl-4-methylenecyclohexa-2,5-dien-1-ones with 2,2′-[1,3-phenylenebis(oxy)]-di(ethan-1-amine)

Russian Journal of Organic Chemistry - Dialkyl [(3,5-di-tert-butyl-4-oxocyclohexa-2,5-dien-1-ylidene)methyl]phosphonates reacted with 2,2′-[1,3-phenylenebis(oxy)]di(ethan-1-amine)...