响应性交联液晶高分子仿生致动器的研究进展

交联液晶高分子兼具液晶取向有序性和交联聚合物熵弹性等特点,能够以动态可调节和可逆的方式来模仿生物体的行为,在仿生器件、柔性机器人、智能表面、生物医药等领域具有良好的应用前景.本综述总结了近几年智能响应性交联液晶高分子在仿生致动器方面的研究进展,从响应性交联液晶高分子的结构和驱动机理出发,讨论了响应性交联液晶高分子的合成工艺、制备技术和成型方法,以及响应性交联液晶高分子对光、热、磁、湿度的响应.此外,介绍了响应性交联液晶高分子致动器在柔性机器人、人工肌肉、微流体运输等领域的应用.最后,对响应性交联液晶高分子的发展前景进行了展望.这项工作主要讨论了响应性交联液晶高分子,旨在为具有新颖功能和更有挑战性的智能微型致动器提供新的设计思路.     

Enhanced photochemical‐shift of reflection band from an inverse opal film based on larger birefringent polymer liquid crystals: Effect of tolane group on the photochemical shift behavior

Photo‐chemically tunable photonic band gap materials are prepared by infiltration of liquid crystal polymers having azobenzene groups into voids of SiO₂ inverse opal films. Linearly polarized (LP) light irradiation results in transformation from a random to an anisotropic molecular orientation of azobenzene side chains in the voids of the SiO₂ inverse opal film, leading to the reversible and stable shift of the reflection peak to longer wavelength more than 15 nm. To improve switching properties, we use copolymers of azobenzene monomer and tolane monomer, which have higher birefringence, as infiltration materials into the voids. The azobenzene‐tolane copolymers are found to show higher birefringence than azobenzene homopolymers by the LP light irradiation at higher temperature. Consequently, the reflection band of the SiO₂ inverse opal film infiltrated with the azobenzene‐tolane copolymer can be shifted to longer wavelength region more than 55 nm by the irradiation of LP light. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1981–1990, 2009     

Photochromic LC copolymers containing azobenzene and crown‐ether groups

An approach for the creation of a novel family of multifunctional crown‐ether‐containing comb‐shaped copolyacrylates consisting of chromophoric (azobenzene), ionophoric (crown‐ether), and mesogenic groups in the same macromolecule was developed. Phase behavior of the copolymers was studied, and correlation between their molecular structure and thermal properties was established. The increase of crown‐ether‐containing groups' concentration up to 26 mol % leads to disruption of nematic order and formation of amorphous phase. Influence of copolymers complexation with potassium perchlorate on mesomorphic properties of such systems was investigated. It was shown that complexation leads to decrease in mesophase thermostability due to the significant reducing of the side group anisometry by perchlorate counter ion. The comparative investigations of photooptical properties and photoorientation processes of copolymers and their complexes were also performed. An essential difference in kinetics of photooptical behavior was revealed; the bulky crown‐ether substituents decrease rotational mobility and prevent photoorientation process of azobenzene fragments diminishing photoinduced orientation and order parameter. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6532–6541, 2008     

Living cationic polymerization of azobenzene‐containing vinyl ether and its photoresponsive behavior

The living cationic polymerization of 4‐[2‐(vinyloxy)ethoxy]azobenzene (AzoVE) was achieved with various Lewis acids in the presence of an ester as an added base. When Et_1.5AlCl_1.5 was used as a catalyst, the living polymerization system was controllable by UV irradiation as a result of cis and trans isomerization of the azobenzene side groups. Furthermore, an initiating system consisting of SnCl₄ and EtAlCl₂ realized fast living polymerization of AzoVE. The polymerization rate of this system was 3 orders of magnitude faster than that obtained with Et_1.5AlCl_1.5. Poly(4‐[2‐(vinyloxy)ethoxy]azobenzene) was soluble in a diethyl ether/hexane mixture at 25 °C but became insoluble upon irradiation with UV light. This phase‐transition behavior was sensitive and reversible upon irradiation with UV or visible light and reflected the change in polarity occurring with cis and trans isomerization of the azobenzene side groups in the polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5138–5146, 2005     

Substituent effect on azobenzene‐based liquid‐crystalline organophosphorus polymers

An Erratum has been published for this article in Journal of Polymer Science Part A: Polymer Chemistry (2003) 41(23) 3862 A new series of combined‐type, azobenzene‐based organophosphorus liquid‐crystalline polymers were synthesized, and their photoisomerization properties were studied. The prepared polymers contained azobenzene units as both the main‐chain and side‐chain mesogens. Various groups were substituted in the terminal of the side‐chain azobenzene mesogen, and the effects of the substituents were investigated. All the polymers were prepared at the ambient temperature by solution polycondensation with various 4‐substituted phenylazo‐4′‐phenyloxyhexylphosphorodichloridates and 4,4′‐bis(6‐hydroxyhexyloxy) azobenzene. The polymers were characterized with gel permeation chromatography, Fourier transform infrared, and ¹H, ¹³C, and ³¹P NMR spectroscopy. Thermogravimetric analysis revealed that all the polymers had high char yields. The liquid‐crystalline behavior of the polymers was examined with hot‐stage optical polarizing microscopy, and all the polymers showed liquid‐crystalline properties. The formation of a mesophase was confirmed by differential scanning calorimetry (DSC). The DSC data suggested that mesophase stability was better for electron‐withdrawing substituents than for halogens and unsubstituted ones. Ultraviolet irradiation studies indicated that the time taken for the completion of photoisomerization depended on the dipolar moment, size, and donor–acceptor characteristics of the terminal substituents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3188–3196, 2003     

Azobenzene‐containing LC polymethacrylates highly photosensitive in broad spectral range

Two photosensitive chiral liquid crystalline azobenzene‐containing polymethacrylates having different length of flexible spacer connecting chromophores with backbone were synthesized and their phase behavior and photo‐optical properties were studied. Both polymers consist of lateral methyl substituents in ortho‐position of azobenzene chromophores providing high photosensitivity even in red spectral region as well as high thermal stability of photoinduced Z‐form of azobenzene chromophores. It is shown, that smectic phase (SmA*) formation in films of polymer with longer spacer predetermines its quite unusual spectral response to UV and subsequent visible light actions. The SmA* phase promotes spontaneous homeotropic alignment of azobenzene chromophores in polymer films. UV‐irradiation induces not only E‐Z isomerization but also results in disruption of homeotropic alignment, whereas subsequent visible light action enables to obtain films with the low degree of chromophores orientation. The photo‐orientation phenomena under the action of polarized light of different wavelength on polymer films were studied. The possibility of using red polarized light of moderate intensity for optical photorecording on polymer films is demonstrated. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2962–2970     

Functionally integrated liquid crystalline photochromic triple block copolymer with locally light‐ and thermal‐controllable sub‐blocks

Photoorientation and reorientation processes induced by illumination of the samples with oppositely directed polarized light and by the thermal treatment were studied for the films of triblock copolymer pAzo₁₀‐b‐pPhM₈₀‐b‐pAzo₁₀ consisting of a nematic phenyl benzoate сentral sub‐block (PhM, DP = 80) with two terminal smectic azobenzene sub‐blocks (Azo, DP = 10). For amorphized films of triblock copolymer, illumination with polarized light (λ = 546 nm) is shown to be by orientation of only Azo‐containing groups, but upon following annealing of the film, PhM groups are adjusted to the orientation of Azo fragments. It was found, that the subsequent illumination of the block copolymer sample with oppositely directed polarized light changes the orientation of azobenzene groups, while the orientation of phenyl benzoate groups is remained unchanged. Thus, the cyclic illumination of the triblock copolymer samples by the linear polarized light and subsequent thermal treatment make it possible to control and fix orientation of azobenzene and phenyl benzoate groups located in different sub‐blocks in the desired and independent manner. The comparison of these results with the data on random p(Azo₇‐ran‐PhM₃₀) copolymer of the similar composition revealed, that in the random copolymer, both Azo and PhM mesogenic groups are involved in the orientational cooperative process regardless of films process treatment. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1602–1611     

A visible light responsive azobenzene‐functionalized polymer: Synthesis,self‐assembly,and photoresponsive properties

A novel visible light responsive random copolymer consisting of hydrophobic azobenzene‐containing acrylate units and hydrophilic acrylic acid units has been prepared. The azobenzene molecule bearing methoxy groups at all four ortho positions is readily synthesized by one‐step conversion of diazotization. The as‐prepared polymer can self‐assemble into nanoparticles in water due to its amphiphilic nature. The tetra‐o‐methoxy‐substituted azobenzene‐functionalized polymer can exhibit the trans‐to‐cis photoswitching under the irradiation with green light of 520 nm and the cis‐to‐trans photoswitching under the irradiation with blue light of 420 nm in both solution and aggregate state. The morphologies of the self‐assembled nanoparticles are revealed by TEM and DLS. The controlled release of loaded molecules from the nanoparticles can be realized by adjusting pH value since the copolymer possesses pH responsive acrylic acid groups. The fluorescence of loaded Nile Red in the nanoparticles can be tuned upon the visible light irradiation. The reversible photoswitching of the azobenzene‐functionalized polymer under visible light may endow the polymer with wide applications without using ultraviolet light at all. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2768–2775     

Photooptical Properties of Polymethacrylates Having Cyanoazobenzene‐Containing Side Groups with Lateral Methyl Substituents and Different Spacer Length

New photochromic polymethacrylates with different spacer length having azobenzene side groups and lateral methyl substituents were synthesized. The phase behavior of polymethacrylates and their photooptical properties were studied and compared with unsubstituted analogues. It is shown that an introduction of lateral methyl substituents results in almost complete suppression of liquid crystalline (LC) phase formation and strong decrease of photoinduced dichroism values. It is found that rates of the photoinduced E‐Z isomerization and back thermal Z‐E isomerization are almost independent on spacer lengths. Due to the presence of lateral substituents, the photoinduced azobenzene Z‐form shows remarkable long lifetime, and back thermal conversion at room temperature takes more than 10 days. Specific peculiarities of the photoorientation process in polymer films under the polarized UV and visible light action were studied and their mechanism is suggested. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1337–1342     

A novel generation of photoactive comb‐shaped polyamides for the photoalignment of liquid crystals

A new approach to the synthesis of photoactive comb‐shaped homo‐ and copolyamides containing azobenzene, cinnamate, and coumarin side groups for photoalignment of liquid crystals was elaborated. Photooptical properties and photoorientational ability of these polymers with respect to liquid crystals were studied. It was shown that polarized UV irradiation of all spin‐coated polyamides leads to orientation of liquid crystalline molecules deposited on the polyamide thin films. The synthesized polymers containing cinnamate and coumarin side groups as well as azobenzene‐containing cyano‐ and nitro‐substituted polymers demonstrated good orientation ability in relation to liquid crystals displaying photoinduced planar orientation with high dichroism values within the range of 0.68–0.72. Contrary to the above‐mentioned polyamides, azobenzene‐containing fluorosubstituted polymers induced a homeotropic orientation of liquid crystals. It was shown that the synthesized photoactive polyamides can be considered as promising photoalignment materials for application in display technology, photonics, and other “smart” optical devices. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4031–4041     

Thermoresponsive Synergistic Hydrogen Bonding Switched by Several Guest Units in a Water‐Soluble Polymer

Thermoresponsive synergistic hydrogen bonding (H‐bonding) switched by several guest units in a water‐soluble polymer is reported. Adjusting the distribution of guest units can effectively change the synergistic H‐bonding inside polymer chains, thus widely switch the preorganization and thermoresponsive behavior of a water‐soluble polymer. The synergistic H‐bonding is also evidenced by converting less polar aldehyde groups into water‐soluble oxime groups, which bring about the lowering‐down of cloud point and an amplified hysteresis effect. This is a general approach toward the wide tunability of thermosensitivity of a water‐soluble polymer simply by adjusting the distribution of several guest H‐bonding units.     

Correlation between the structure and wettability of photoswitchable hydrophilic azobenzene monolayers on silicon

Photoresponsive monolayers of hydrophilically substituted azobenzenes have been prepared by reaction on aminosilane monolayers on silicon surfaces. Grafting densities in the 0.2-1.0 molecule/nm(2) range were determined by X-ray reflectometry. The monolayers exhibit reversible photoisomerization, switching from a more hydrophilic trans state to a less hydrophilic cis state upon UV irradiation, in contrast with the usual behavior of most azobenzene monolayers that switch from a less to a more hydrophilic state. This indicates that the wettability is not dominated by the change in the dipole moment of the azobenzene moiety but originates from variations in the composition of the outer surface of the monolayers resulting from the reorientation of the substituent groups. The light-driven change in the water contact angle correlates linearly with the grafting density but remains small. However, the wettability contrast can be increased by forcing the molecules to stand in an improved vertical orientation, either by densifying the underlying aminosilane monolayer or by filling the voids left at the bottom of the layer of grafted azobenzene molecules.     

Synthesis of a Photoresponsive Liquid‐Crystalline Polymer Containing Azobenzene

The synthesis of an oriented liquid‐crystalline photoresponsive polymer, prepared by polymerization of mono‐ and di‐acrylates, both of which contain azobenzene chromophores, is reported. The prepared free‐standing polymer film shows strong reversible photoinduced deformation upon exposure to unpolarized UV light at 366 nm, as a result of an optically induced isomeric change of the azobenzene moieties in the polymer network. The synthesis process is relatively simple and more efficient compared to conventional ones, and can be used to synthesize other liquid‐crystalline photoresponsive polymers. The use of this photoresponsive polymer film as an optical high‐pass/low‐pass switch under UV or natural light irradiation for a laser beam is demonstrated. This photoresponsive polymer may have applications in robotic systems, artificial muscles, and actuators in microelectromechanical systems (MEMS) and labs on chips.

     

Swelling–shrinking behavior of hydrated noncross‐linked copolymer films in response to photoreversible isomerizaton and metal complexation of spiropyran units of the copolymers

The copolymer of hydroxypropyl methacrylate (HPMA) and photochromic spiropyran methacrylate (SPMA) has been synthesized. The films of the copolymer (P(HPMA‐SPMA)) in a hydrated state showed reversible swelling–shrinking behavior in response to photoreversible isomerization and metal complexation of SPMA units in spite of covalently noncross‐linked copolymers. In addition, the protonated open form of the SPMA units of the copolymer was possibly stabilized thermodynamically by the HPMA units from ultraviolet–visible absorption measurement of the hydrated P(HPMA‐SPMA) film. On the other hand, the difference in color of the hydrated films between P(HPMA‐AABMA) and P(NIPMA‐AABMA), which was a copolymer of N‐isopropyl methacryl amide (NIPMA) and azobenzene methacrylate (AABMA) as a pH indicator, was suggestive of the interference of the proximal hydroxyl groups of the immobilized HPMA units with protonation of the AABMA units. The HPMA units of the copolymers also contributed to improvement of thermodynamic stability of the metal complexes with the SPMA units. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and properties of azobenzene‐containing poly(1‐alkyne)s with different functional pendant groups

1‐Alkynes containing azobenzene mesogenic moieties [HC?C(CH₂)₉? O? ph? N?N? ph? O? R; R = ethyl ( 1 ), octyl ( 2 ), decyl ( 3 ), (S)‐2‐methylbutyl ( 4 ), or (S)‐1‐ethoxy‐1‐oxopropan‐2‐yl ( 5 ); ph = 1,4‐phenyl] were synthesized and polymerized in the presence of a Rh catalyst {(nbd)Rh⁺[B(C₆H5)₄]^?; nbd = 2,5‐norbornadiene} to yield a series of liquid‐crystalline polymers in high yields (e.g., >75%). These polymers had moderate molecular weights (number‐average molecular weight ≥ 12,000), high cis contents in the main chain (up to 83%), good thermal stability, and good solubility in common organic solvents, such as tetrahydrofuran, chloroform, and dichloromethane. These polymers were thoroughly characterized by a combination of infrared, nuclear magnetic resonance, thermogravimetric analysis, differential scanning calorimetry, polarized optical microscopy, and two‐dimensional wide‐angle X‐ray diffraction techniques. The liquid‐crystalline behavior of these polymers was dependent on the tail group attached to the azobenzene structure. Poly‐ 1 , which had the shortest tail group, that is, an ethyl group, showed a smectic A mesophase, whereas poly‐ 2 , poly‐ 3 , and poly‐ 5 , which had longer or chiral tail groups, formed smectic C mesophases, and poly‐ 4 , which had another chiral group attached to the azobenzene structure, showed a chiral smectic C mesophase in both the heating and cooling processes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4532–4545, 2006     

Linear and branched fluoroazo‐benzene chromophores with increased compatibility in semifluorinated polymers

A family of fluorinated azobenzene‐based push‐pull chromophores with one, two, and three trifluorovinyl ether (TFV) groups in linear and branched architecture was synthesized and utilized as active materials in the low optical loss electro‐optic (EO) composites. The fluorinated azobenzene chromophores exhibited increased solubility (30–50 wt %) in semifluorinated polymer host, such as perfluorocyclobutane (PFCB) aromatic ether resin after crosslinking, compared with the commercially available nonfluorinated azobenzene chromophore Disperse Red 1 (1–2 wt %). The impact of this approach on the optical properties on the polymer blends is assessed through optical propagation loss measurements and EO characterization. The resulting fluorinated EO composites showed excellent optical clarity, low birefringence, and low optical loss less than 0.5 dB/cm, while giving EO coefficients of about 3–7 pm/V at 1550 nm. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3166–3177, 2007     

Water‐soluble triply‐responsive homopolymers of N,N‐dimethylaminoethyl methacrylate with a terminal azobenzene moiety

Novel water‐soluble triply‐responsive homopolymers of N,N‐dimethylaminoethyl methacrylate (DMAEMA) containing an azobenzene moiety as the terminal group were synthesized by atom transfer radical polymerization (ATRP) technique. The ATRP process of DMAEMA was initiated by an azobenzene derivative substituted with a 2‐bromoisobutyryl group (Azo‐Br) in the presence of CuCl/Me₆TREN in 1,4‐dioxane as a catalyst system. The molecular weights and their polydispersities of the resulting homopolymers (Azo‐PDMAEMA) were characterized by gel permeation chromatography (GPC). The homopolymers are soluble in aqueous solution and exhibit a lower critical solution temperature (LCST) that alternated reversibly in response to Ph and photoisomerization of the terminal azobenzene moiety. It was found that the LCST increased as pH decreased in the range of testing. Under UV light irradiation, the trans‐to‐cis photoisomerization of the azobenzene moiety resulted in a higher LCST, whereas it recovered under visible light irradiation. This kind of polymers should be particularly interesting for a variety of potential applications in some promising areas, such as drug controlled‐releasing carriers and intelligent materials because of the multistimuli responsive property. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2564–2570, 2010     

Synthesis and photoresponsive behavior of azobenzene‐containing side‐chain liquid crystalline diblock polymers with polypeptide block

Well‐defined azobenzene‐containing side‐chain liquid crystalline diblock copolymers composed of poly[6‐(4‐methoxy‐azobenzene‐4′‐oxy) hexyl methacrylate] (PMMAZO) and poly(γ‐benzyl‐L ‐glutamate) (PBLG) were synthesized by click reaction from alkyne‐ and azide‐functionalized homopolymers. The alkyne‐terminated PMMAZO homopolymers were synthesized by copper‐mediated atom transfer radical polymerization with a bromine‐containing alkyne bifunctional initiator, and the azido‐terminated PBLG homopolymers were synthesized by ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride in DMF at room temperature using an amine‐containing azide initiator. The thermotropic phase behavior of PMMAZO‐b‐PBLG diblock copolymers in bulk were investigated using differential scanning calorimetry and polarized light microscopy. The PMMAZO‐b‐PBLG diblock copolymers exhibited a smectic phase and a nematic phase when the weight fraction of PMMAZO block was more than 50%. Photoisomerization behavior of PMMAZO‐b‐PBLG diblock copolymers and the corresponding PMMAZO homopolymers in solid film and in solution were investigated using UV–vis. In solution, trans–cis isomerization of diblock copolymers was slower than that of the corresponding PMMAZO homopolymers. These results may provide guidelines for the design of effective photoresponsive anisotropic materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and polymerization of amphiphilic methacrylates containing permanent dipole azobenzene chromophores

New amphiphilic photochromic methacrylates with the structures of 4‐[ω‐methacryloyloxyoligo(ethyleneglycol)]‐4′‐cyanoazobenzene (MEn) and 4‐methacryloyloxy‐4′‐{2‐cyano‐3‐oxy‐3‐[ω‐methoxyoligo(ethyleneglycol)]prop‐1‐en‐1‐yl}azobenzene (MEnMe) and oligo(oxyethylene) segments of different lengths were synthesized. These methacrylates were characterized by the presence of permanent dipole azobenzene chromophores and hydrophilic oligo (oxyethylene) segments. The methacrylates were obtained with six‐step and five‐step synthetic sequences, respectively, in 12–47% overall yields. The radical polymerization of the MEn monomers afforded a 50% yield of the corresponding polymers as orange solids with a number‐average molecular weight of about 40 kD. No solid polymer was obtained from the radical polymerization of the MEnME compounds. Two‐dimensional NMR spectra allowed the unequivocal assignment of the NMR signals and demonstrated a significant contribution of internal charge transfer to the electronic distribution of the azobenzene chromophore. Relaxation time measurements confirmed that the flexible polyether segment effectively decoupled photochromic groups from the polymer backbone. Optical microscopy, differential scanning calorimetry analysis, and X‐ray diffraction data demonstrated the presence of interdigitated smectic mesophases. The stability of mesophases showed a significant dependence on the chemical structure of the analyzed compounds. The glass‐transition temperatures of the polymers were rather low because of the plasticizing effect of the spacers. The monomers and polymers were used for the deposition of Langmuir films and Langmuir–Blodgett–Kuhn multilayers. A strong influence of the macromolecular structure on the film properties was observed. The photoresponsive properties of monomers and polymers were investigated with irradiation at different wavelengths. Isomerization kinetics were independent of both molecular weight and spacer length. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2957–2977, 2001     

Improving holographic writing performance of photo‐orientable azobenzene polymers by molecular glasses

Long‐term stable holographic volume gratings in azobenzene‐containing films have potential applications as forgery‐proof security features or in holographic data storage. However, azobenzene‐based polymer systems often lack sufficiently high writing speeds. Here, an approach to improve the holographic writing performance of photo‐orientable azobenzene‐containing polymers by blending with azobenzene molecular glasses is presented. The molecular glass enhances the photo‐plastification effect and, consequently, the writing speed. This concept of improving the holographic performance of photo‐orientable azobenzene polymers with azobenzene molecular glasses is demonstrated with a homopolymer and two block copolymers. In the azobenzene homopolymer, an addition of 10 wt % of the molecular glass leads to a doubling of the writing speed. Simultaneously, the long‐term stability of inscribed gratings is maintained. In case of the block copolymers, the molecular glass is present in the polystyrene matrix and accumulates in the azobenzene minority phase. Adding 5–10 wt % of molecular glass improves the writing speed of the azobenzene block copolymer by a factor of 3–4. An addition of 15 wt % of molecular glass to the block copolymer containing azobenzene and nonphotoactive mesogenic side groups reduces the writing time by a factor of 15 and the long‐term stability of the gratings is retained. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2110–2117