ATRP和点击化学结合法制备PDMAAm—PDMS—PDMAAm嵌段聚合物

采用原子转移自由基聚合（ATRP）法制得了端基分别为烯丙基和溴原子的聚二甲基丙烯酰胺（PDMAAm），经叠氮基亲核取代后与端炔基聚二甲基硅氧烷进行点击反应，得到两亲三嵌段聚合物。利用^1HNMR、FTIR、GPC等测试方法对聚合物的结构进行了表征。结果表明：采用ATRP法合成的PDMAAm均聚物分子量分布较窄，通过点击化学法将热力学不相容的亲水性PDMAAm链段及疏水性聚二甲基硅氧烷（PDMS）链段制备PDMAAmPDMS—PDMAAm嵌段聚合物，是一种高效易行的方法。     

PP/PMMA Block Copolymers by Combination of ATRP and Metallocene Catalysis

PP-b-PMMA has been synthesized by a combination of metallocene catalysis and the controlled radical polymerization technique ATRP. Cp₂ZrCl₂/MAO and (Me₄Cp)SiMe₂(N-tert-Bu)TiCl₂/MAO were used for the synthesis of atactic polypropylene. By a series of chemical modifications pp macroinitiators for the ATRP polymerization of MMA were synthesized. The PP-b-PMMA with polydispersities from 1.8–2.8 and an M_n ranging from 8 to 26 kg/mol was characterized by ¹H-NMR,SEC and DSC.     

A Facile Synthesis of Cleavable Block Copolymers via Tandem Polymerizations of NMRP and ATRP

A functionalized compound, 4‐(2‐bromoisobutyryl)‐2,2,6,6‐tetra‐methylpiperidine‐1‐oxyl (Br‐TEMPO), was synthesized and used to synthesize block copolymers through tandem nitroxide‐mediated radical polymerization (NMRP) and atom transfer radical polymerization (ATRP). First, Br‐TEMPO was used to mediate the polymerization of styrene. The kinetics of polymerization proved a typical “living” nature of the reaction and the effectiveness in the mediation of polymerization of Br‐TEMPO. Then the PS‐Br macroinitiator was used to initiate atom transfer radical polymerization (ATRP). A series of acrylates were initiated by PS‐Br macroinitiators in typical ATRP processes at various conditions. The controlled polymerization of ATRP was also confirmed by molecular weight and kinetic analysis. Several cleavable block copolymers of PS‐b‐P(t‐BA), PS‐b‐P(n‐BA), and PS‐b‐PMA, with different molecular weights, were synthesized via this strategy. Relatively low polydispersities (<1.5) were observed and the molecular weights were in agreement with the theoretical ones. Hydrolysis of PS‐b‐P(t‐BA) was carried out, giving amphiphilic block copolymer PS‐b‐PAA without the cleavage of C‐ON bond or ester bond. All the block copolymers have two T_gs as demonstrated by DSC. A typical cleavable block copolymer of PS‐b‐PMA was cleaved by adding phenylhydrazine at 120°C to produce homopolymers in situ.     

One‐step synthesis of hyperbranched polyethylene macroinitiator and its block copolymers with methyl methacrylate or styrene via ATRP

Block copolymers of hyperbranched polyethylene (PE) and linear polystyrene (PS) or poly(methyl methacrylate) (PMMA) were synthesized via atom transfer radical polymerization (ATRP) with hyperbranched PE macroinitiators. The PE macroinitiators were synthesized through a “living” polymerization of ethylene catalyzed with a Pd‐diimine catalyst and end‐capped with 4‐chloromethyl styrene as a chain quenching agent in one step. The macroinitiator and block copolymer samples were characterized by gel permeation chromatography, ¹H and ¹³C NMR, and differential scanning calorimetry. The hyperbranched PE chains had narrow molecular weight distribution and contained a single terminal benzyl chloride per chain. Both hyperbranched PE and linear PS or PMMA blocks had well‐controlled molecular weights. Slow initiation was observed in ATRP because of steric effect of hyperbranched structures, resulting in slightly broad polydispersity index in the block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3024–3032, 2010     

UV‐Free Microfluidic Particle Fabrication at Low Temperature Using ARGET‐ATRP as the Initiator System

A new way to fabricate monodisperse polymer particles in a microfluidic device without UV‐light and without the need for high temperatures is described in this article. By applying an activator regeneration by electron transfer ‐ atom transfer radical polymerization (ARGET‐ATRP) initiator system in a co‐capillary microfluidic setup and by separating the monomer mixture in an initiator and a catalyst phase, a fast polymerization of the droplets at low temperature without premature curing and thus clogging of the capillaries can be achieved. The influence of the flow rates on the particle sizes and their polydispersity as well as the controlled character of the polymerization are investigated. The particle size is well adjustable, but the reaction is not controlled due to the high radical concentration needed for rapid polymerization. In addition, particles with incorporated UV‐dyes are produced as a proof of concept at low temperature.

     

Luminescent polymeric ruthenium complexes with polystyrene‐b‐poly(methyl methacrylate) macroligands: The sequential activation of initiator sites for blocks generated by parallel polymerization mechanisms

The synthesis of polystyrene‐b‐poly(methyl methacrylate) diblock copolymers with a luminescent ruthenium(II) tris(bipyridine) [Ru(bpy)₃] complex at the block junction is described. The macroligand precursor, polystyrene bipyridine‐poly(methyl methacrylate) [bpy(PS–H)(PMMA)], was synthesized via the atom transfer radical polymerization of styrene and methyl methacrylate from two independent, sequentially activated initiating sites. Both polymerization steps resulted in the growth of blocks with sizes consistent with monomer loading and narrow molecular weight distributions (i.e., polydispersity index < 1.3). Subsequent reactions with ruthenium(II) bis(bipyridine) dichloride [Ru(bpy)₂Cl₂] in the presence of Ag⁺ generated the ruthenium tris(bipyridine)‐centered diblock, which is of interest for the imaging of block copolymer microstructures and for incorporation into new photonic materials. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4250–4255, 2002     

Synthesis and characterization of poly(methyl methacrylate)‐block‐poly(methylphenylsilane)‐ block‐poly(methyl methacrylate) by atom transfer radical polymerization

ABA block copolymers of methyl methacrylate and methylphenylsilane were synthesized with a methodology based on atom transfer radical polymerization (ATRP). The reaction of samples of α,ω‐dihalopoly(methylphenylsilane) with 2‐hydroxyethyl‐2‐methyl‐2‐bromoproprionate gave suitable macroinitiators for the ATRP of methyl methacrylate. The latter procedure was carried out at 95 °C in a xylene solution with CuBr and 2,2‐bipyridine as the initiating system. The rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography, and differential scanning calorimetry was used to obtain preliminary evidence of phase separation in the copolymer products. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 30–40, 2003     

Low‐Temperature Growth of Thick Polystyrene Brushes via ATRP

Summary: This contribution describes the graft polymerization of polystyrene (PS) by atom transfer radical polymerization at 50, 60, and 75 °C. Thick PS brushes were grown from initiator‐functionalized PGMA layers on silicon, and constant growth rates provide indirect evidence that the polymerizations were controlled.

Formation of polystyrene brushes at T < T_g by ATRP of styrene from α‐bromoester initiator‐functionalized poly(glycidyl methacrylate) layers.     

Micelles Formed by Cylindrical Brush‐Coil Block Copolymers

Summary: Amphiphilic cylindrical brush‐coil block copolymers consisting of a polystyrene coil and a cylindrical brush block with poly(acrylic acid) side chains are prepared by ATRP of t‐butylacrylate from a block comacroinitiator. Upon acidolysis of the poly(t‐butylacrylate), water‐soluble polymers were obtained that were observed to form micelles consisting of 4–5 block copolymers on average in aqueous solution. The star‐like nature of such micelles was clearly visualized by scanning force microscopy.

Schematic of coil‐cylindrical brush block copolymer PS‐b‐(PⁱBEMA‐g‐PAA), its AFM image clearly showing the main chain and the PAA corona of the cylindrical brush block.     

Atom Transfer Radical Polymerization with Polypeptide Initiators: A General Approach to Block Copolymers of Sequence‐Defined Polypeptides and Synthetic Polymers

Summary: A novel two‐step polymerization strategy allowing the integration of sequence‐defined oligopeptides into synthetic polymers has been demonstrated by the successful synthesis of an oligopeptide‐block‐poly(n‐butyl acrylate) copolymer. The approach utilizes a solid‐phase supported synthesis of an oligopeptide macroinitiator (SPPS) followed by solution‐phase atom transfer radical polymerization (ATRP) initiated by the oligopeptide macroinitiator. The resulting block copolymer exhibited a low (1.19) and a controllable .

Poly(n‐butyl acrylate)‐block‐oligopeptide.     

Solid‐Phase Incorporation of an ATRP Initiator for Polymer–DNA Biohybrids

The combination of polymers with nucleic acids leads to materials with significantly advanced properties. To obviate the necessity and complexity of conjugating two macromolecules, a polymer initiator is described that can be directly covalently linked to DNA during solid‐phase synthesis. Polymer can then be grown from the DNA bound initiator, both in solution after the DNA‐initiator is released from the solid support as well as directly on the solid support, simplifying purification. The resulting polymer‐DNA hybrids were examined by chromatography and fluorescence methods that attested to the integrity of hybrids and the DNA. The ability to use DNA‐based supports expands the range of readily available molecules that can be used with the initiator, as exemplified by direct synthesis of a biotin polymer hybrid on solid‐support. This method expands the accessibility and range of advanced polymer biohybrid materials.     

水介质中ATRP法制备PDMAEMA及其温敏性

在30℃下以溴化亚铜-溴化铜混合物为催化剂,五甲基二乙烯三胺(PMDETA)为配体,在水介质中利用原子转移自由基聚合法(ATRP)合成聚合度达到300的聚甲基丙烯酸N,N-二甲基氨基乙酯(PDMAEMA)。核磁共振结果显示,聚合反应符合一级反应动力学描述。利用紫外可见分光光度计(UV-Vis)表征该聚合物的温敏性,结果表明,随着PDMAEMA聚合物链长的增加,其最低临界溶解温度(LCST)可降低至31.4℃。     

One‐Pot Synthesis of Well‐Defined Amphiphilic and Adaptative Block Copolymers via Versatile Combination of “Click” Chemistry and ATRP

Well‐defined amphiphilic PCL‐b‐PDMAEMA block copolymers were successfully synthesized by a combination of ATRP and “click” chemistry following either a commutative two‐step procedure or a straightforward one‐pot process using CuBr · 3Bpy as the sole catalyst. Compared to the traditional coupling method, combining ATRP and click chemistry even in a “one‐pot” process allows the preparation of PCL‐b‐PDMAEMA diblock copolymers characterized by a narrow molecular weight distribution and quantitative conversion of azides and alkynes into triazole functions. Moreover, the amphiphilic character of these copolymers was demonstrated by surface tension measurements and critical micellization concentration was calculated.

     

Multiple Vesicle Morphologies Formed from Reactive H‐Shaped Block Copolymers

Amphiphilic H‐shaped block copolymers (PTMSPMA)₂PEG(PTMSPMA)₂ with 91 ethylene glycol (EG) units and four PTMSPMA chains have been synthesized by atom transfer radical polymerization of trimethoxylsilylpropyl methacrylate (TMSPMA) at room temperature in methanol. The structure, molecular weight, and molecular weight distribution have been characterized by ¹H NMR spectroscopy and GPC traces. These H‐shaped block copolymers can self‐assemble in DMF/water, and multiple vesicle aggregates from large‐compound vesicles, to multilayer vesicles and unilamillar vesicles are formed. These morphologies can be simply controlled by variation of the chain length ratios.

     

Block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole

Poly(methyl methacrylate) with a thiophene end group having narrow polydispersity was prepared by the Atom Transfer Radical Polymerization (ATRP) technique. Subsequently, electrically conducting block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole were synthesized by using p-toluene sulfonic acid and sodium dodecyl sulfate as the supporting electrolytes via constant potential electrolysis. Characterization of the block copolymers were performed by CV, FTIR, SEM, TGA, and DSC analyses. Electrical conductivities were evaluated by the four-probe technique. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4218–4225, 1999     

Atom transfer radical polymerization of methyl methacrylate at ambient temperature using soluble Cu(I) complex catalysts formed with mixed ligands of multidentate amines and halide ions

An Erratum has been published for this article in J Polym Sci Part A: Polym Chem (2004) 42(19) 5030 . The addition of soluble quaternaryammonium halides (QX) in catalytic amounts takes into solution CuX/pentamethyldiethylenetriamine (PMDETA) complex (X = Cl, Br) in methyl methacrylate (MMA). The soluble catalyst complex provided much better control of the polymerization of MMA at ambient temperature than did the insoluble catalyst formed in the absence of QX, with CuCl/PMDETA/Aliquat® 336 (AQCl) proving to be superior to the CuBr/PMDETA/Bu₄NBr catalyst system. The effect was independent of the size of the quaternaryammonium ion. Also, the presence of Cl in the catalyst–QX combination either as CuCl or as QCl was enough to give much better control than that provided by a wholly Br‐based system. Among the various initiators used, that is, ethyl 2‐bromoisobutyrate (EBiB), methyl 2‐bromopropionate (MBP), 1‐phenylethyl bromide (PEBr), and p‐toluenesulfonyl chloride (pTsCl), only EBiB gave a satisfactory result. With MBP and PEBr the initiation was slower than the propagation, whereas with pTsCl the initiation was very fast, so that instantaneous termination occurred. The living nature of the polymers was shown by block copolymer preparation. It has been suggested that some of the added halide ions entered into the coordination spheres of Cu(I) and Cu(II), leading to their improved solubility and stronger deactivation by the Cu(II) complex. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4132–4142, 2004     

ATRP of Silylated Glycerol Monomethacrylate in Organic Medium for Convenient Synthesis of Amphiphilic Copolymers

A synthetic method with broad spectrum of application in the preparation of self‐organizing amphiphilic copolymers having poly(glycerol monomethacrylate) (PG2MA) as a hydrophilic part is herein reported. The approach relies on the facile preparation of silylated glycerol monomethacrylate (G2MA‐TMS) monomer, and its controlled atom transfer radical polymerization (ATRP) in organic media, which produced well‐defined (co)polymers with predictable molar mass and low dispersity, followed by desilylation. The wide scope of such a strategy was demonstrated by the successful synthesis of original polycaprolactone‐b‐poly(glycerol monomethacrylate) (PCL‐b‐PG2MA) diblock copolymers with the ability to self‐assemble into ordered structures (micelles and vesicles) in an aqueous medium.

     

Synthesis of Novel Rod‐Coil Amphiphilic Block Copolymers PAA‐b‐DPS with Fréchet‐Type Dendronized Polystyrene and Poly(acrylic acid)

A series of well‐defined rod‐coil PAA‐b‐DPS block copolymers, containing Fréchet‐type dendronized polystyrene (DPS) with different generation as a rod‐like hydrophobic block and poly(acrylic acid) (PAA) as a hydrophilic coil were synthesized. The procedure included the following steps: the precursor PMA‐b‐DPS copolymer was prepared through ATRP of Fréchet‐type dendritic styrene macromonomer bearing the first to the third generation (G1–G3), respectively, initiated by poly(methyl acrylate) (PMA‐Br). Then, by converting PMA into PAA by subsequent hydrolysis, the targeted amphiphilic copolymers were obtained. Moreover, by using the rod‐coil amphiphiles as building blocks, large compound micelles and vesicles were formed in a binary solvent mixture of DMF/H₂O. Morphological changes in self‐assembly showed dependence on the length of the dendronized block.

     

Sequential synthesis of multiblock copolymers by atom transfer radical and cationic polymerization

ABCBA‐type pentablock copolymers of methyl methacrylate (MMA), styrene (S), and isobutylene (IB) were prepared by a three‐step synthesis, which included atom transfer radical polymerization (ATRP) and cationic polymerization: (1) poly(methyl methacrylate) (PMMA) with terminal chlorine atoms was prepared by ATRP initiated with an aromatic difunctional initiator bearing two trichloromethyl groups under CuCl/2,2′‐bipyridine catalysis; (2) PMMA with the same catalyst was used for ATRP of styrene, which produced a poly(S‐b‐MMA‐b‐S) triblock copolymer; and (3) IB was polymerized cationically in the presence of the aforementioned triblock copolymer and BCl₃, and this produced a poly(IB‐b‐S‐b‐MMA‐b‐S‐b‐IB) pentablock copolymer. The reaction temperature, varied from ?78 to ?25 °C, significantly affected the IB content in the product; the highest was obtained at ?25 °C. The formation of a pentablock copolymer with a narrow molecular weight distribution provided direct evidence of the presence of active chlorine at the ends of the poly(S‐b‐MMA‐b‐S) triblock copolymer, capable of the initiation of the cationic polymerization of IB in the presence of BCl₃. A differential scanning calorimetry trace of the pentablock copolymer (20.1 mol % IB) showed the glass‐transition temperatures of three segregated domains, that is, polyisobutylene (?87.4 °C), polystyrene (95.6 °C), and PMMA (103.7 °C) blocks. One glass‐transition temperature (104.5 °C) was observed for the aforementioned triblock copolymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6098–6108, 2004