Photodissociation effects on pulsed laser deposited silver oxide thin films: surface‐enhanced resonance Raman scattering

Temporal Raman scattering measurements with 488, 532 and 632 nm excitation wavelengths and normal Raman studies by varying the power (from 30 W/cm² to 2 MW/cm²) at 488 nm were performed on silver oxide thin films prepared by pulsed‐laser deposition. Initially, silver oxide Raman spectra were observed with all three excitation wavelengths. With further increase in time and power, silver oxide photodissociated into silver nanostructures. High‐intensity spectral lines were observed at 1336 ± 25 and 1596 ± 10 cm⁻¹ with 488 nm excitation. No spectral features were observed with 633 nm excitation. Surface‐enhanced resonance Raman scattering theory is used to explain the complex behavior in the intensity of the 1336/1596 cm⁻¹ lines with varying power of 488 nm excitation. Copyright © 2011 John Wiley & Sons, Ltd.     

Microstructured polymer‐based substrates with broadband absorption for surface‐enhanced Raman scattering

Large area (3 × 3 cm²) substrates for surface‐enhanced Raman scattering were fabricated by combining femtosecond laser microstructuring and soft lithography techniques. The fabrication procedure is as follows: (i) femtosecond laser machining is used to create a silicon master copy, (ii) replicates from polydimethylsiloxane are made, and (iii) a 50‐nm‐thick gold film is deposited on the surface of the replicates. The resulting substrates exhibit strongly enhanced absorption in the spectral region of 350 ∼ 1000 nm and generate enhanced Raman signal with enhancement factor of the order of 10⁷ for 10^{‐ 6} M rhodamine 6G. The main advantages of our substrates are low cost, large active area, and possibility for mass replication. Copyright © 2013 John Wiley & Sons, Ltd.     

Silver macro‐texture substrates fabricated by plasma selective etching for surface‐enhanced Raman scattering

We have demonstrated a novel method to generate the nanostructured substrate that shows a large enhancement with a spatially uniform enhancement factor of approximately 10⁶ in surface enhanced Raman scattering (SERS). The substrates are fabricated using plasma selective etching. First, the Al₂O₃–TiC template which contains mixed Al₂O₃ and TiC grains with the diameters of ~400 nm is selected as a base plate. The Al₂O₃ and TiC grains have different physical properties, such as hardness, which corresponds to different etching rate in a plasma gas. Then, the Al₂O₃–TiC substrate is selectively etched to generate a random macro‐texture (MT) with different depths using the plasma of mixed gas of Ar and C₂H₄. Third, the MT substrate is deposited with a silver film (Ag). We further demonstrate that by varying the thickness of Ag layer, the EF is different which is confirmed by the plasmonic localized electric fields calculations using finite difference time domain. Finally, we combine this novel Ag MT substrate with ultrathin dielectric film, and the prepared substrates are coated with a 10 Å ta‐C film. The 10 Å ta‐C film can protect the oxygen‐free Ag in air and prevent Ag ionizing in aqueous solutions. More importantly, the ultrathin ta‐C can release the strongest plasmonic electric field to the outside of ta‐C layer and get a higher electric field than the uncoated Ag substrate. We expect that this method has more potential applications in analytic assays using SERS technology. Copyright © 2012 John Wiley & Sons, Ltd.     

Nanogaps in 2D Ag‐nanocap arrays for surface‐enhanced Raman scattering

The surface‐enhanced Raman scattering substrate of Ag–Ag nanocap arrays are prepared by depositing Ag film onto two‐dimensional (2D) polystyrene colloidal nanosphere templates. When the original colloidal arrays are used as the substrate for Ag deposition, surface‐enhanced Raman scattering (SERS) enhancements show the strong size‐dependence behaviours. When O₂‐plasma etched 2D polystyrene templates are used as the substrate for Ag deposition to form nanogaps, the gap sizes between adjacent Ag nanocaps from 5 to 20 nm generate even greater SERS enhancements. When SiO₂ coverage is deposited to isolate the Ag nanocaps from the neighbours, the SERS signals are enhanced more. The significant SERS effects are due to the coupling between Ag nanocaps controlled by the distance, which enhances the local electric‐field intensity. Copyright © 2013 John Wiley & Sons, Ltd.     

Nanostructured thin films as surface‐enhanced Raman scattering substrates

Nanoporous thin films with silver nanoparticles were synthesized with a bottom–up approach, and its potential as effective surface‐enhanced Raman scattering (SERS) substrates was demonstrated. The use of mesoporous titania films as substrates allowed to control the growth of nanoparticles on the film surface. Atomic force microscopy measurements, Ultraviolet‐visible and X‐ray diffraction analysis confirmed the photoreduction of Ag⁺ to Ag⁰ with the formation of nanoparticles with crystallite dimensions of 32 to 36 nm. The new substrates allowed the detection of two analytes (rhodamine B isothiocyanate and cytochrome c), present in solutions at very low concentrations, highlighting their potential in SERS sensing. Reproducibility, homogeneity, enhancement factor of the substrate, consistency of results and detection limits were also assessed. Copyright © 2012 John Wiley & Sons, Ltd.     

Improved performance of surface‐enhanced Raman scattering on silver substrates prepared in nitric acid solutions

In this work, we propose a new electrochemical method to prepare surface‐enhanced Raman scattering (SERS)‐active silver substrates in nitric acid solutions. Experimental results indicate that the SERS intensity of adsorbed Rhodamine 6G (R6G) can be significantly increased, as compared with that of R6G adsorbed on a SERS‐active Ag substrate prepared by an electrochemical method in a chloride‐containing solution, which was generally employed in the literature. Moreover, the SERS of R6G on the newly developed substrate (prepared in a nitric acid solution) still performs well at a high temperature of 250 °C. However, the enhancement capability of the SERS‐active substrate prepared in a chloride‐containing solution is seriously destroyed at temperatures higher than 150 °C. Further investigations indicate that the oxidation states of roughened Ag substrates prepared in nitric acid solutions under different experiment conditions have less influence on the corresponding SERS performances. Instead, different surface morphologies of roughened Ag substrates and different contents of nitrogen‐containing dopping ions on the roughened Ag substrates demonstrate significant effects on the corresponding SERS performances. Copyright © 2011 John Wiley & Sons, Ltd.     

Direct observation of surface‐enhanced Raman scattering in ZnO nanocrystals

We have been able to observe the surface‐enhanced Raman scattering (SERS) from 4‐mercaptopyridine (4‐Mpy) molecules adsorbed on ZnO nanocrystals, which display 10³ enhancement factors (EFs). An excitation wavelength‐dependent behavior is clearly observed. Another molecule BVPP is also observed to have surface‐enhanced Raman signals. The chemical enhancement is most likely responsible for the observed enhancement, since plasmon resonances are ruled out. The research is important not only for a better understanding of the SERS mechanism, but also for extension of the application of Raman spectroscopy to a variety of adsorption problems on a semiconductor surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Fabrication of periodical Ag–Au compound nanostructure films with controllable Ag nanoparticle aggregate patterns: a study on surface‐enhanced Raman scattering

The Ag–Au compound nanostructure films with controllable patterns of Ag nanoparticle (NP) aggregates were fabricated. A strategy of two‐step synthesis was employed toward the target products. Firstly, the precursor Au NP (17 nm) films were synthesized as templates. Secondly, the Ag NPs (45 nm) were deposited on the precursor films. Three types of Ag NP aggregates were obtained including discrete Ag NPs (discrete type), necklace‐like Ag NP aggregates (necklace type), and huddle‐like Ag NP aggregates (huddle type). The surface‐enhanced Raman scattering (SERS) property was studied on these nanostructures by using the probing molecule of rhodamine 6G under the excitation laser of 514.5 nm. Interestingly, the different types of samples showed different enhancement abilities. A statistical method was employed to assess the enhancement. The relative enhancement factor for each Ag NP was estimated quantitatively under the ratio of 1 : 25 : 18 for the discrete‐type, necklace‐type, and huddle‐type samples at the given concentration of 10⁻⁸ mol/l. This research shows that the enhancement ability of each Ag NP is dependent on the aggregate morphology. Moreover, the different enhancement abilities displayed different limit detection concentrations up to 10⁻⁸, 10⁻¹¹, and 10⁻⁹ mol/l, separately. The understanding of the relationship between the defined nanostructures and the SERS enhancement is very meaningful for the design of new SERS substrates with better performance. Copyright © 2015 John Wiley & Sons, Ltd.     

Ag‐nanoparticle‐modified single Ag nanowire for detection of melamine by surface‐enhanced Raman spectroscopy

Silver nanowires synthesized by a solvothermal method were used as templates for fabricating silver‐nanoparticle‐decorated silver (AgNP/Ag) nanowires. The number density and particle size of Ag nanoparticles can be controlled by varying the concentration of Ag precursor. Single AgNP/Ag nanowire exhibited strong surface‐enhanced Raman scattering effect. Detection of melamine molecules at concentrations as low as 1.0 × 10⁻⁸ M was used as an example to show the possible applications of such AgNP/Ag nanowires. Their application in rapid detection of melamine in milk solution was further demonstrated. It was shown that melamine in milk solution at a low concentration of 5.0 × 10⁻⁸ M can be easily detected with little sample pretreatment. The results demonstrate the potential of single AgNP/Ag nanowire as a surface‐enhanced Raman scattering substrate for convenient and sensitive detection of trace amounts of melamine in a complex mixture. Copyright © 2012 John Wiley & Sons, Ltd.     

Single‐molecule surface‐enhanced Raman scattering of fullerene C60

We achieved single‐molecule surface‐enhanced Raman scattering (SM‐SERS) spectra from ultralow concentrations (10⁻¹⁵ M) of fullerene C₆₀ on uniformly assembled Au nanoparticles. It was found that resonant excitation at 785 nm is a powerful tool to probe SM‐SERS in this system. The appearance of additional bands and splitting of some vibrational modes were observed because of the symmetry reduction of the adsorbed molecule and a relaxation in the surface selection rules. Time‐evolved spectral fluctuation and ‘hot spot’ dependence in the SM‐SERS spectra were demonstrated to result from the single‐molecule Raman behavior of the spherical C₆₀ on Au nanoparticles. Copyright © 2010 John Wiley & Sons, Ltd.     

Application of surface‐enhanced Raman scattering in cell analysis

In surface‐enhanced Raman scattering (SERS), the scattered intensity is drastically increased due to a resonant interaction with surface plasmons of coin metals. SERS is a nondestructive spectroscopic method applied also to biomedical samples. It inherits the advantages of normal Raman spectroscopy and at the same time overcomes the inherent low sensitivity problem. These properties endow SERS with exciting opportunities to be a successful analytical tool for cell analysis. SERS can be used to detect only molecules located on or close to the metallic nanostructures which can support surface plasmon resonances for the enhancement of the Raman signals. Therefore, these metallic nanostructures play a key role in the application of SERS in cell analysis. By incorporating the SERS substrates into the biosamples, molecular structural probing and cellular imaging become possible. In the past decade, analysts worldwide have developed many schemes to study the chemical changes and component distribution in cells by using SERS. In this paper, the application of SERS in cell analysis is reviewed. Copyright © 2011 John Wiley & Sons, Ltd.     

Halide‐ion‐assisted increase of surface‐enhanced hyper‐Raman scattering: a clear observation of the chemical effect

We show that the increase of surface‐enhanced hyper‐Raman scattering (SEHRS) intensity of organic dye molecules adsorbed on single silver (Ag) colloid aggregate in the presence of halide ions is a direct evidence of the chemical effect in the enhancement mechanism. Time‐dependent SEHRS measurements before and after adding halide ions enabled us to distinctly observe the chemical effect. The presence of the halide ions results to a more stable chemical interaction between metal and dye molecule, making it more resistant against photodegradation effects. This study can contribute in elucidating the chemical effect mechanism and aid in the development of SEHRS as a useful spectroscopic tool. Copyright © 2008 John Wiley & Sons, Ltd.     

Concentration‐dependent surface‐enhanced Raman scattering and molecular dynamic study of dimethyl formamide

A concentration‐dependent Raman study of dimethyl formamide (DMF) in Ag nanocolloidal solution was carried out in order to observe the effect of concentration on the surface enhancement mechanism. The Raman spectra in the region 900–2200 cm⁻¹ comprising four prominent Raman modes were measured experimentally and analyzed at five different concentrations: 1, 3, 5, 7, 10 mM , and in neat DMF. In order to find the possible configurations of DMF + Ag complexes, density functional theory (DFT) calculations were carried out taking one, three and five Ag atom clusters. The Raman spectra of unconjugated DMF, DMF + Ag and DMF + 3Ag complexes were calculated theoretically to assign the vibrational modes under consideration more accurately and to understand the wavenumber shift and change in intensity observed in experimental measurements. Water present in the colloidal solution may also conjugate with DMF and its complexes with Ag. In order to see the influence of water on the wavenumber shift and intensity changes, we have also obtained the optimized structures and Raman modes of DMF + water and DMF + water + Ag complexes. Good agreement between the experimental and theoretical wavenumber shifts has been obtained by using B3LYP functional theory and CEP‐31G basis set for the DMF + Ag complex. The experimental results suggest that the SERS enhancement is concentration‐dependent. The concentration‐dependent linewidth shows the existence of the phenomena of motional narrowing and diffusion dynamics in the colloidal solution. Copyright © 2007 John Wiley & Sons, Ltd.     

Improved performances on surface‐enhanced Raman scattering based on electrochemically roughened gold substrates modified with SiO2 nanoparticles

In this work, we use electrochemical oxidation–reduction cycles (ORC) methods to prepare surface‐enhanced Raman scattering (SERS)‐active gold substrates modified with SiO₂ nanoparticles to improve the corresponding SERS performances. Based on the modified substrates, the SERS of Rhodamine 6G (R6G) exhibits a higher intensity by 3‐fold of magnitude, as compared with that of R6G adsorbed on a SERS‐active Au substrate without the modification of SiO₂ nanoparticles. Moreover, the SERS enhancement capabilities of the modified and the unmodified Au substrates are seriously destroyed at temperatures higher than 250 and 200 °C, respectively. These results indicate that the modification of SiO₂ nanoparticles can improve the thermal stability of SERS‐active substrates. The aging in SERS intensity is also depressed on this modified Au substrate due to the contribution of SiO₂ nanoparticles to SERS effects. Copyright © 2009 John Wiley & Sons, Ltd.     

Detection and quantitative analysis of carbendazim herbicide on Ag nanoparticles via surface‐enhanced Raman scattering

Carbendazim (MBC) is a fungicide widely used in agriculture, and there are serious concerns regarding the health risks that could be caused by this fungicide. Here, we explore its ultrasensitive detection by surface‐enhanced Raman scattering (SERS). First, to obtain maximum SERS signal, the adsorption of the target molecule onto metallic surface is essential. Therefore, we study the adsorption of the MBC onto the nanoparticle surface by SERS under different experimental conditions, such as different synthesis methods of nanoparticle, variable excitation wavelength, and fungicide concentration with the aim to detect MBC at low concentrations. Experiments are carried out with three kinds of colloidal nanoparticles: Ag and Au reduced by citrate and Ag reduced by hydroxylamine. However, mainly Ag colloids are highly efficient in the SERS detection of MBC. In addition, theoretical calculations of MBC Raman spectrum and that of the surface complex are used to help with the understanding the mechanisms responsible for the interaction between MBC and Ag. Ultraviolet–visible absorption spectroscopy showed displacement to the red of the plasmon resonance of Ag colloid in the presence of MBC. Copyright © 2015 John Wiley & Sons, Ltd.     

Identification of berberine in ancient and historical textiles by surface‐enhanced Raman scattering

The highly fluorescent natural dye berberine can be easily identified in microscopic textile samples by surface‐enhanced Raman spectroscopy employing citrate‐reduced Ag colloid. The ordinary Raman (OR) and SERS spectra of berberine are presented and discussed in the light of a DFT calculation. Using FT‐Raman and FT‐SERS we could reliably compare relative intensity shifts and investigate the adsorption geometry of berberine on Ag nanoparticles. The significant enhancement in the FT‐SERS spectrum of the out‐of‐plane ring system bending deformation mode at 729 cm⁻¹ relative to a group of in‐plane vibrations at around 1500 cm⁻¹ was interpreted as evidence of a ‘flat‐on’ adsorption geometry. SERS was successfully used to identify berberine in silk fiber samples coated with colloidal Ag following a pretreatment with HCl vapor. The SERS method allowed us to detect berberine in a microscopic sample of a single silk fiber from a severely degraded and soiled 17th Century Chinese textile fragment. Copyright © 2007 John Wiley & Sons, Ltd.     

Ultrathin silver‐coated gold nanoparticles as suitable substrate for surface‐enhanced Raman scattering

Surface‐enhanced Raman scattering (SERS) is an extremely powerful tool for the analysis of the composition of bimetallic nanoparticle (BNP) surfaces because of the different adsorption schemes adopted by several molecules on different metals, such as Au and Ag. The preparation of BNPs normally implies a change in the plasmonic properties of the core metal. However, for technological applications it could be interesting to synthesize core–shell structures preserving these original plasmonic properties. In this work, we present a facile method for coating colloidal gold nanoparticles (NPs) in solution with a very thin shell of silver. The resulting bimetallic Au@Ag system maintains the optical properties of gold but shows the chemical surface affinity of silver. The effectiveness of the coating method, as well as the progressive silver enrichment of the outermost part of the Au NPs, has been monitored through the SERS spectra of several species (chloride, luteolin, thiophenol and lucigenin), which show different behaviors on gold and silver surfaces. A growth mechanism of the Ag shell is proposed on the basis of the spectroscopic and microscopic data consisting in the formation and deposit of Ag clusters on the Au NP surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Cross‐section and selection rules in surface‐enhanced hyper Raman scattering

The expression for the surface‐enhanced hyper Raman scattering (SEHRS) cross‐section of symmetrical molecules within the framework of the dipole–quadrupole theory is presented. It is formed by contributions that depend on various dipole and quadrupole moments. The enhancement coefficients for the quadrupole enhancement mechanism in some limited cases can reach a value 10³⁰. It is demonstrated that the contributions follow some selection rules. Qualitative classification of the contributions based on the enhancement degree is given. It is demonstrated that the SEHR spectra of pyrazine and pyridine can be explained by the presented theory. Copyright © 2011 John Wiley & Sons, Ltd.     

Silica‐overcoated substrates for detection of proteins by surface‐enhanced Raman spectroscopy

Ag film over nanosphere (AgFON) substrates for surface‐enhanced Raman spectroscopy (SERS) are shown to be ineffective for the detection of proteins in phosphate buffer solution (PBS) because of the decomposition of the substrate resulting in a total loss of SERS activity. However, modification of these substrates with SiO₂ overlayers overcomes this problem. The SiO₂ overlayers are produced by filtered arc deposition (FAD) and are characterised by atomic force microscopy (AFM). Their porosity is examined using Raman spectroscopy and the detection of cytochrome c and bovine serum albumin in PBS is successfully demonstrated. These findings show promise for the detection of proteins in biologically relevant conditions using Ag‐based SERS substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

Silver‐coated inverse opals formed from polystyrene spheres for surface‐enhanced Raman scattering

We have developed a new substrate for surface‐enhanced Raman scattering (SERS) measurements involving a thin silver layer deposited over an ion‐etched TiO₂ inverse opal. The latter is formed by chemically infiltrating a polystyrene opal array with TiO₂ followed by a thermal decomposition of the spheres. The SERS response of the these substrates is examined for several sphere sizes and lasers wavelengths; the results show that such substrates yield high enhance factors, comparable to substrates involving a silver layer deposited directly on a polystyrene opal array. Copyright © 2010 John Wiley & Sons, Ltd.