A thienoquinoxaline and a styryl-quinoxaline as new fluorescent probes for amyloid-β fibrils

Simple and easy to prepare quinoxaline derivatives proved able to stain amyloid fibers such as aggregated lysozyme and Aβ(1-40)-peptide by a fluorescence “turn on” mechanism. Thienoquinoxaline 1 allowed the detection of lysozyme and Aβ(1-40) fibers at λ = 555 and 532 nm, respectively, with excitation at λ = 450 nm. Styryl-quinoxaline 2 stained lysozyme and Aβ(1-40) fibers with fluorescence at λ = 579 and 567 nm, respectively, upon excitation at λ = 453 nm. The apparent K_d values for Aβ(1-40) fibers were 77 and 294 nM for 1 and 2, respectively. The sensitivity of the aggregates detection assay with these new dyes was higher than that of thioflavin T. Considering their unique fluorescence properties compared to other dyes reported in the field, they can be considered as additional staining tools for the detection and studies of peptide/protein aggregation.     

LIF technique offers the potential for the detection of cadmium-induced alteration in photosynthetic activities of Zea Mays L.

The laser-induced fluorescence spectra of leaves of Zea mays L. plants treated with different concentrations (0.01, 0.10 and 1.00 mM) of cadmium were recorded in region 650–800 nm using 488 nm line of Argon Ion laser as excitation source and PMT as detector. Besides this, blue-green fluorescence and Chl fluorescence were also measured using third harmonic (355 nm) of Nd:YAG laser as excitation source and 320 M monochromator with intensified charge coupled device as a detector in the region 400–800 nm. These spectra have been used to analyse the effect of several doses of cadmium on the photosynthetic activities of Z. mays L. plants. The fluorescence intensity ratios (FIR) of control as well as treated Z. mays L. were calculated by evaluating curve-fitted parameters using Gaussian spectral function. In addition, growth parameters like photosynthetic pigments content were also estimated. The chlorophyll fluorescence intensity ratio F685/F735 excited by both 488 and 355 nm lines are strongly correlated with photosynthetic pigments content (total chlorophyll and carotenoids) and their ratios. Consequently, there also existed a correlation between the blue-green fluorescence intensity ratio F470/F540 and photosynthetic pigments content.     

Solvothermal growth and morphology study of Cu2Se films

Solvothermal growth of cuprous selenide films on copper substrate has been succeeded by treating copper foil in the mixture of selenium powder and amines or hydrazine. The films were characterized by methods of XRD, SEM, TEM and optical spectra (Cu₂Se, JCPDS 47-1448). Films with hexagonal microcrystals can be obtained in hydrazine/water reaction system. When CTAB (CTAB = cetyltrimethylammonium bromide) is added to the system, the film is composed of thin leaf-like microcrystals. When ethylenediamine (en) is used as solvent, the leaf-like microcrystals are crimped.     

Different level of fluorescence in Raman spectra of montmorillonites

The paper presents the study of selected montmorillonite standards by Raman spectroscopy and microscopy supported by elemental analysis, X-ray powder diffraction analysis and thermal analysis. Dispersive Raman spectroscopy with excitation lasers of 532 nm and 780 nm, dispersive Raman microscopy with excitation laser of 532 nm and 100× magnifying lens, and Fourier Transform-Raman spectroscopy with excitation laser of 1064 nm were used for the analysis of four montmorillonites (Kunipia-F, SWy-2, STx-1b and SAz-2). These mineral standards differed mainly in the type of interlayer cation and substitution of octahedral aluminium by magnesium or iron. A comparison of measured Raman spectra of montmorillonite with regard to their level of fluorescence and the presence of characteristic spectral bands was carried out. Almost all measured spectra of montmorillonites were significantly affected by fluorescence and only one sample was influenced by fluorescence slightly or not at all. In the spectra of tested montmorillonites, several characteristic Raman bands were found. The most intensive band at 96 cm⁻¹ belongs to deformation vibrations of interlayer cations. The band at 200 cm⁻¹ corresponds to deformation vibrations of the AlO₆ octahedron and at 710 cm⁻¹ can be assigned to deformation vibrations of the SiO₄ tetrahedron. The band at 3620 cm⁻¹ corresponds to the stretching vibration of structural OH groups in montmorillonites.     

Preparation and optical absorption of electrodeposited or sputtered,dense or porous nanocrystalline CuInS2 thin films

Copper indium disulphide thin films were obtained by one-step deposition with two different techniques. Films are synthesised by electrodeposition using a single electrolytic bath and by r.f. sputtering using a single target. Deposition rates were about 75 nm/min and 2.5–6.5 nm/min, respectively. Electrodeposited films have rough and porous surfaces, with no preferential orientation. Smooth or particle-covered surfaces were observed for sputtered films with a highly (112)-oriented chalcopyrite structure. Absorption coefficients calculated from transmittance spectra have high values in visible range. Electrodeposited samples present higher absorption coefficients on a larger wavelength range. A relationship between morphology and optical properties was found; absorption coefficients increase with porosity and roughness of the films. Band gap values of about 1.3 eV for electrodeposited and 1.5 eV for sputtered thin films were calculated.     

Structural and optical properties of sprayed Zn1−xMnxO films

In recent years the dilute magnetic semiconductors have received much attention due to the complementary properties of semiconductor and ferromagnetic behaviour. Zn_1−xMn_xO thin films have been synthesized by chemical spray pyrolysis at a substrate temperature of 400 °C with different manganese compositions that vary in the range, 0.0 ≤ x ≤ 0.25, on Corning 7059 glass substrates. The X-ray diffraction studies revealed that all the films were strongly oriented along the (002) orientation corresponding to the hexagonal wurtzite structure. The crystalline quality of the layers was found to decrease with the increase of x, however, no structural changes were observed over the ‘Mn’ composition range investigated. The optical absorption studies revealed that the energy band gap of the films followed the Vegard's law. The optical band gap of the films prepared at x = 0.15 was found to be ∼3.35 eV. The photoluminescence characteristics of Zn_1−xMn_xO films showed an emission peak at around 390 nm with a broad band about 530 nm. The details of these results were reported and discussed.     

Quantum efficiency improvement of a cesium based resonance fluorescence detector by helium-induced collisional excitation energy transfer

Quantum efficiency improvement of a cesium based resonance fluorescence detector (RFD) was achieved by enhancing the transfer in a particular channel of the RFD excitation scheme with noble gas-induced collisional excitation energy transfer (CEET). The influence of Cs–Ar and Cs–He collisional mixing between the 6D and 7P states in cesium on the quantum efficiency of the 6S → 6D → 7P → 6S excitation scheme was investigated by fluorescence measurements at relevant transitions. Ar-induced CEET was found to have little effect on the fluorescence response and quantum efficiency of the Cs RFD excitation scheme. However, a 35 fold quantum efficiency increase in the cesium resonance fluorescence detector response at only moderate He pressures was observed.     

Recognition of DNA based on changes in the fluorescence intensity of CdSe/CD QDs–phenanthroline systems

The CdSe quantum dots (QDs) modified by mercapto-β-cyclodextrin (CD) were synthesized and characterized by transmission electron microscopy, powder X-ray diffraction, excitation and emission spectra, and fluorescence lifetime. When λ_ex = 370 nm, the fluorescence peak of CdSe/CD QDs is at 525 nm. Phenanthroline (Phen) is able to quench their fluorescence, which can be recovered by the addition of DNA. The quenching and restoration of fluorescence intensity were found to be linearly proportional to the amount of Phen and DNA, respectively. The variation of the fluorescence intensity of the CdSe/CD QDs–Phen system was studied, and it was demonstrated to result from a static mechanism due to the formation of a Phen inclusion complex with the CdSe QDs modified by mercapto-β-cyclodextrin. The fluorescence recovery was due to the binding of DNA with Phen in the inclusion complex, leading to the freeing of the CdSe/CD QDs. The binding constants and sizes of the binding sites of the Phen–DNA interaction were calculated to be 1.33 × 10⁷ mol^?1 L and 10.79 bp.     

Fluorescence detection and identification of eight sulphonamides using capillary electrophoresis on released excipients in lake water

A simple and sensitive capillary electrophoresis method with fluorescence detection was developed for the determination of sulphanilamide, sulphamerazine, sulphacetamide and sulphanilic acid, sulphathiazole, Sulphisomidine, sulphadoxine and sulphadiazine in lake water. The sulphonamides were extracted from lake water, derivatized with fluorescamine and determination of sulphonamide was achieved using 20 mM borate buffer of pH 9.5 at an applied voltage of 25 kV. Detection was performed using UG-11 excitation filter of 405 nm and 495 nm emission filters. A fast, simple and sensitive method with limit of detection in the range 0.89–1.43 n mol L⁻¹ for all the eight sulphonamides with good recoveries of 80–110% is seen. Inter-day and intra-day validation of the separation method shows fairly good results. The detection and quantification limits for this newly developed method are too low to determine drug residues in lake water.     

Modification of photocatalytic TiO2 thin films by electron beam irradiation

Noble metal-modified TiO₂ films were prepared by electron beam deposition of Pt, Pd, Au and Ag on the surface of TiO₂ films with diameters ranging from <1 nm to 500 nm. The morphology of the films was characterized by X-ray diffractometry (XRD), field emission scanning electron microscope (FMSEM) and transmission electron microscope (TEM). The photocatalytic capability of the films were tested and compared by degradation of methyl orange (MO) in aqueous solutions under both UV and visible light illumination.     

Tunable amplified spontaneous emissions by dimensional-controlled microcrystal synthesis

One-dimensional (1D) microwires and 2D microdisks of DMF-HPPO have been selectively prepared by controlling the solution polarity. Tunable amplified spontaneous emissions are achieved and 1D microwire demonstrates sharp splitting photoluminescence peaks around 618 nm, while 2D microdisk shows a red-shifted emission central at 650 nm.     

K-line X-ray fluorescence analysis of high-Z elements

X-ray fluorescence analysis with high-energy photons (typically 40–100 keV) is described. Measurement of K-lines from high-Z elements has attractive advantages, which are not available by L-line analysis in normal X-ray region. Through the comparison of excitation methods, it has been found that quasi-monochromatic beams with sufficient intensity and moderate spectral distribution are most suitable for improving the detection limit. Performances of other excitation methods and recent experimental trends are also discussed.     

Role of laser pre-pulse wavelength and inter-pulse delay on signal enhancement in collinear double-pulse laser-induced breakdown spectroscopy

Dual-pulse (DP) laser-induced breakdown spectroscopy (LIBS) provides significant improvement in signal intensity as compared to conventional single-pulse LIBS. We investigated collinear DPLIBS experimental performance using various laser wavelength combinations employing 1064 nm, 532 nm, and 266 nm Nd:YAG lasers. In particular, the role of the pre-pulse laser wavelength, inter-pulse delay times, and energies of the reheating pulses on LIBS sensitivity improvements is studied. Wavelengths of 1064 nm, 532 nm, and 266 nm pulses were used for generating pre-pulse plasma while 1064 nm pulse was used for reheating the pre-formed plasma generated by the pre-pulse. Significant emission intensity enhancement is noticed for all reheated plasma regardless of the pre-pulse excitation beam wavelength compared to single pulse LIBS. A dual peak in signal enhancement was observed for different inter-pulse delays, especially for 1064:1064 nm combinations, which is explained based on temperature measurement and shockwave expansion phenomenon. Our results also show that 266 nm:1064 nm combination provided maximum absolute signal intensity as compared to 1064 nm:1064 nm or 532 nm:1064 nm.     

Ionic liquid behavior and high thermal stability of silver chloride nanoparticles: Synthesis and characterization

Silver chloride was found to be stable even after calcination at 650 °C for 10 h. SEM studies revealed the morphology of silver chloride as hexagonal particles. TEM studies show the size of silver chloride particles to have an average size of 6–7 nm. Thermal studies suggest that silver chloride nanoparticles behave like ionic liquid or molten salt in the range of 455–650 °C.     

Neodymium two-step optogalvanic spectroscopy in a hollow cathode lamp

This paper presents the results of Doppler-limited optogalvanic spectroscopy in commercial neodymium hollow cathode lamp, ranging from 580 to 600 nm. Using the laser multistep excitation technique, five transitions for the first step excitation from the neodymium ground state and seven transitions related to the second step of photoionization scheme were observed. Within these results, for the first time, a new line, 596.645 nm, was observed which could be attributed to a possible two-step transition to neodymium energy level from the 16 979.352 cm^? 1 to 33 735.4 cm^? 1. The simulated (synthetic) spectra of a mixture of neon (Ne I) and neodymium (Nd I) in this region are compared with experiments in order to facilitate data analysis.     

Optical and dielectric properties of isothermally crystallized nano-KNbO3 in Er3+-doped K2O–Nb2O5–SiO2 glasses

Precursor glass of composition 25K₂O–25Nb₂O₅–50SiO₂ (mol%) doped with Er₂O₃ (0.5 wt% in excess) was isothermally crystallized at 800 °C for 0–100 h to obtain transparent KNbO₃ nanostructured glass–ceramics. XRD, FESEM, TEM, FTIRRS, dielectric constant, refractive index, absorption and fluorescence measurements were carried out to analyze the morphology, dielectric, structure and optical properties of the glass–ceramics. The crystallite size of KNbO₃ estimated from XRD and TEM is found to vary in the range 7–23 nm. A steep rise in the dielectric constant of glass–ceramics with heat-treatment time reveals the formation of ferroelectric nanocrystalline KNbO₃ phase. The measured visible photoluminescence spectra have exhibited green emission transitions of ²H_11/2, ⁴S_3/2 → ⁴I_15/2 upon excitation at 377 nm (⁴I_15/2 → ⁴G_11/2) absorption band of Er³⁺ ions. The near infrared (NIR) emission transition ⁴I_13/2 → ⁴I_15/2 is detected around 1550 nm on excitation at 980 nm (⁴I_15/2 → ⁴I_11/2) of absorption bands of Er³⁺ ions. It is observed that photoluminescent intensity at 526 nm (²H_11/2 → ⁴I_15/2), 550 nm (⁴S_3/2 → ⁴I_15/2) and 1550 nm (⁴I_13/2 → ⁴I_15/2) initially decrease and then gradually increase with increase in heat-treatment time. The measured lifetime (τ_f) of the ⁴I_13/2 → ⁴I_15/2 transition also possesses a similar trend. The measured absorption and fluorescence spectra reveal that the Er³⁺ ions gradually enter into the KNbO₃ nanocrystals.     

UV-absorption and fluorimetric methods for the determination of alprazolam in pharmaceutical formulation

The development of UV and fluorescence spectrophotometric methods for the quantitative determination of alprazolam in dosage forms using As(III)?SDS system. The two simple and sensitive, spectrophotometric and spectrofluorimetric methods were developed for the determination of alprazolam (ALP) in tablets. These methods are based on formation of ALP?As(III) complex in the presence of SDS. The UV-spectrum of 30% methanolic solution of ALP (5 × 10^?5 M) at pH 6.5 (Mclivaine buffer) was run between 200 and 380 nm. The absorption spectrum of ALP exhibits two peaks with a λ_max. at 255 nm and a weak band at 325 nm. When the spectra of the drug were run at varying pH in the region 200–380 nm, one isosbestic point at 290 nm was observed, which indicated the presence of two ionic conditions in solution. The complex exhibited an absorption maximum at 265 nm and emission peak at 520 nm with respect to the excitation wavelength of 325 nm. The spectrophotometric method was found to be linear in 8.0–17.0 μg ml^?1 range with detection limit of 13.520 μg ml^?1, while 0.05–9.5 μg ml^?1 range was with detection limit of 1.048 × 10^?2 μg ml^?1 by spectrofluorimetric method. The mean percentage recovery of the added quantity was found to be 99.54 (spectrophotometric method) and 100.22 (spectrofluorimetric method) and the %RSD are lower than 0.478 and 0.296 determined spectrophotomerically and spectrofluorimtrically, respectively. This indicates that the proposed method is accurate. The apparent ionization constant of ALP was found to be 9.29. The spectra, experimental conditions were set followed by determination stoichiometry, stability constant and thermodynamic parameters of the As(III), Co(II), Ni(II), and Zn(II) complexes with ALP at pH 6.5. The proposed methods have been successfully applied to the assay of ALP in tablets and the results were statistically evaluated.     

Electrochemiluminescent metallopolymers: Tuning the emission wavelength by energy transfer between two bound centres

The electrochemical and photonic properties of a metallopolymer in which both [Ru(dpp)₂Cl]⁺ (N5Cl) and [Ru(dpp)₂]²⁺ (N6) moieties are coordinated to a poly(4-vinylpyridine) backbone are described, dpp is 4,7-diphenyl-1,10-phenanthroline. Cyclic voltammetry and luminescence studies indicate that approximately 2% of centres are bis-coordinated to the PVP backbone, i.e., 2% are [Ru(dpp)₂]²⁺. When dissolved in ethanol or acetonitrile, two photoluminescence peaks are observed, at 620 and 720 nm corresponding to the N6 and N5Cl moieties, respectively. This dual emission indicates that the two centres communicate weakly in solution. In contrast, in aqueous solution or in thin films, a single emission band at 720 nm is observed suggesting efficient energy transfer to the N5Cl moiety. Polymer films generate electrochemiluminescence in the presence of oxalate as a co-reactant with an emission maximum at 730 nm corresponding to emission from the N5Cl centres alone.     

Synthesis and characterization of CaBi4Ti4O15 thin films annealed by microwave and conventional furnaces

CaBi₄Ti₄O₁₅ thin films were deposited by the polymeric precursor method and crystallized in a domestic microwave oven and conventional furnace. The films obtained for microwave energy are well-adhered, homogeneous and with good specularity when treated at 700 ^°C for 10 min. The microstructure and the structure of the films can be tuned by adjusting the crystallization conditions. When microwave oven is employed, the films presented bigger grains with mean grain size around 80 nm. For comparison, films were also prepared by the conventional furnace at 700 °C for 2 h.