Controlled Synthesis of Uniform,Micrometer‐Sized Ruthenium‐Functionalized Poly(N‐Isopropylacrylamide) Gel Particles and their Application to the Catalysis of the Belousov–Zhabotinsky Reaction

Ruthenium‐functionalized poly(N‐isopropyl acrylamide)‐based chemically oscillating microgels with diameters between 1 and 6 µm are synthesized by a modified precipitation polymerization approach. It is found that the initial amount of N‐isopropyl acrylamide (NIPAAm) can significantly affect the final sizes of the microgels. 2.5 g of initial NIPAAm results in microgels with maximum average diameter of ≈6 ± 0.5 µm. Making use of their fluorescence due to their ruthenium contents and their larger sizes compared to microgels prepared using other traditional methods, the impact of changes in the NaBrO₃ concentrations on their microscopic behavior is studied using a combination of fluorescence microscopy and dynamic light scattering techniques. When increasing the concentration of NaBrO₃ in a solution, the microgels first experience a decrease in size followed by aggregation that leads to the loss of colloidal stability. Finally, the redox potential behavior and optical performance of the Belousov–Zhabotinsky reaction catalyzed by these microgels are studied by electrochemical and spectroscopic means.

     

Facile One‐Step Synthesis of Monodisperse Micron‐Sized Latex Particles with Highly Carboxylated Surfaces

A facile method for the aqueous synthesis of monodisperse and micronmeter‐sized colloids with highly carboxylated surfaces is presented. The method is applied to three different monomers, styrene, methyl methacrylate, and 2,2,2‐trifluoroethyl methacrylate, and illustrate tuning of the size and monodispersity in the reactions. High surface density of carboxylic acids of up to 10 COOH nm⁻² from potentiometric titrations, is achieved through copolymerization with itaconic acid. The versatility of this system is highlighted by creating highly fluorescent and monodisperse particles that can be index matched in aqueous solution and through surface modification via the carboxylic acid groups using standard amidation chemistry.

     

Fabrication of Thermo‐Responsive Hybrid Hydrogels by In‐Situ Mineralization and Self‐Assembly of Microgel Particles

Summary: An in‐situ mineralization process in the presence of thermo‐responsive microgels leads to the formation of well‐defined hybrid materials. Experimental data suggest that control of the mineralization process in the presence of the microgels offers the possibility to obtain sub‐micrometer‐sized hybrid particles or macroscopic hybrid hydrogels. The rapid formation of CaCO₃ crystals in the microgel structure favors the preparation of the hybrid particles wherein inorganic crystals cover the shell layer of the microgel. The slow formation of CaCO₃ crystals leads to the simultaneous self‐assembly of the microgel particles on the bottom of the reaction vessel, and the formation of a physical network. It has been demonstrated that hybrid hydrogel materials with different calcium carbonate contents and temperature‐dependent swelling‐deswelling properties can be prepared.

Formation of a hybrid hydrogel by the vapor diffusion method.     

Preparation of Micron‐Sized Monodisperse Poly(ionic liquid) Particles

Micron‐sized monodisperse poly(ionic liquid) (PIL) particles, poly([2‐(methacryloyloxy)ethyl]trimethylammonium bis(trifluoromethanesulfonyl)amide), were prepared by dispersion polymerization at 70 °C in methanol with poly(vinylpyrrolidone) as a stabilizer. The obtained particle size could be controlled by addition of ethanol to the methanol medium while maintaining narrow monodispersity. The PIL particles exhibit unique properties; they can be observed by scanning electron microscopy without platinum coating, which is generally used to avoid an electron charge. Moreover, the solubility of the PIL particles can be easily changed by changing the counter anion, similar to the process for ionic liquids.     

Preparation,morphology, and thermoresponsive properties of poly(N‐isopropylacrylamide)‐based copolymer microgels

In this research, thermoresponsive copolymer latex particles with an average diameter of about 200–500 nm were prepared via surfactant‐free emulsion polymerization. The thermoresponsive properties of these particles were designed by the addition of hydrophilic monomers [acrylic acid (AA) and sodium acrylate (SA)] to copolymerize with N‐isopropylacrylamide (NIPAAm). The effects of the comonomers and composition on the synthesis mechanism, kinetics, particle size, morphology, and thermoresponsive properties of the copolymer latex were also studied to determine the relationships between the synthesis conditions, the particle morphology, and the thermoresponsive properties. The results showed that the addition of hydrophilic AA or SA affected the mechanism and kinetics of polymerization. The lower critical solution temperature (LCST) of the latex copolymerized with AA rose to a higher temperature. However, because the strong hydrophilic and ionic properties of SA caused a core–shell structure, where NIPAAm was in the inner core and SA was in the outer shell, the LCST of the latex copolymerized with SA was still the same as that of pure poly(N‐isopropylacrylamide) latex. It was concluded that these submicrometer copolymer latex particles with different thermoresponsive properties could be applied in many fields. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 356–370, 2006     

Responsive Polymer‐Based Assemblies for Sensing Applications

Poly (N‐isopropylacrylamide) (pNIPAm)‐based hydrogels and hydrogel particles (microgels) have been extensively studied since their discovery and “popularization” a few decades ago. While their uses seem to have no bounds, this Feature Article is focused on their development and application for sensing small molecules, macromolecules, and biomolecules. Hydrogel/microgel‐based photonic materials with order in one, two, or three dimensions are highlighted, which exhibit optical properties that depend on the presence and concentration of various analytes.

     

Phase Transition Behaviors of Self‐Oscillating Polymer and Nano‐Gel Particles

Summary: Self‐oscillating polymers and nano‐gel particles consisting of N‐isopropylacrylamide and the ruthenium catalyst of the Belousov‐Zhabotinsky reaction have been prepared. In order to clarify the crosslinking effect on the self‐oscillating behavior, the phase transition behaviors were investigated by measuring the transmittance and the fluorescence intensity of the polymer solution and the gel bead suspension. Cooperative effects due to crosslinking will play an important role for the design of nanoactuators.

Chemical structure of poly(NIPAAm‐co‐Ru(bpy)₃).     

Control of stereospecificity in the radical polymerization of N‐methyl‐N‐(2‐pyridyl)acrylamide by conformational switching of the monomer with protonation

Radical polymerization of N‐methyl‐N‐(2‐pyridyl)acrylamide (MPyAAm) was carried out in dichloromethane at low temperatures in the presence of trifluoroacetic acid (TFA). The m dyad contents of the polymers obtained at 0 °C increased linearly from 37 to 60% with an increase in the [TFA]₀/[MPyAAm]₀ ratio from 1 to 5. Nuclear magnetic resonance (NMR) analysis of MPyAAm–TFA mixtures in dichloromethane‐d₂ revealed that the favorable conformation in terms of the pyridyl group to the carbonyl group in MPyAAm switched from s‐trans to s‐cis by protonation. The results suggest that controlling the conformation of MPyAAm resulted in control of the stereospecificity in radical polymerization of the monomer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A Novel Route to the Preparation of Poly(N‐isopropylacrylamide) Microgels by Using Inorganic Clay as a Cross‐Linker

Adopting inorganic clay (hectorite) and MBA as physical and chemical cross‐linking agents, respectively, PNIPAM microgels were synthesized by SFEP. The chemical structure and morphology of the microgels were confirmed by FTIR, WXRD, and SEM. The temperature‐sensitivity of the microgels was investigated by DLS and UV spectrophotometers. The results inferred that clay platelets dispersed in an aqueous medium were fully exfoliated and could act as a kind of multifunctional cross‐linking agent and significantly reduced the hydrodynamic diameters of the microgels. In fact, the hydrodynamic diameters of the PNIPAM microgels with clay as cross‐linker ranged from 154 to 322 nm which was much smaller than that using MBA as chemical cross‐linker, the later was in the range of 284–808 nm on heating from 5 to 50 °C.

     

High‐Internal‐Phase Pickering Emulsions Stabilized Solely by Peanut‐Protein‐Isolate Microgel Particles with Multiple Potential Applications

High‐internal‐phase Pickering emulsions have various applications in materials science. However, the biocompatibility and biodegradability of inorganic or synthetic stabilizers limit their applications. Herein, we describe high‐internal‐phase Pickering emulsions with 87 % edible oil or 88 % n‐hexane in water stabilized by peanut‐protein‐isolate microgel particles. These dispersed phase fractions are the highest in all known food‐grade Pickering emulsions. The protein‐based microgel particles are in different aggregate states depending on the pH value. The emulsions can be utilized for multiple potential applications simply by changing the internal‐phase composition. A substitute for partially hydrogenated vegetable oils is obtained when the internal phase is an edible oil. If the internal phase is n‐hexane, the emulsion can be used as a template to produce porous materials, which are advantageous for tissue engineering.     

Synthesis of Highly pH‐Responsive Glucose Poly(orthoester)

pH‐Responsive polymers have great potential in biomedical applications, including the selective delivery of preloaded drugs to tissues with low pH values. These polymers usually contain acid‐labile linkages such as esters and acetals/ketals. However, these linkages are only mildly pH‐responsive with relatively long half‐lives (t_1/2). Orthoester linkages are more acid‐labile, but current methods suffer from synthetic challenges and are limited to the availability of monomers. To address these limitations, a sugar poly(orthoester) was synthesized as a highly pH‐responsive polymer. The synthesis was achieved by using 2,3,4‐tri‐O‐acetyl‐α‐D ‐glucopyranosyl bromide as a difunctional AB monomer and tetra‐n‐butylammonium iodide (TBAI) as an effective promoter. Under optimal conditions, polymers with molecular weights of 6.9 kDa were synthesized in a polycondensation manner. The synthesized glucose poly(orthoester), wherein all sugar units were connected through orthoester linkages, was highly pH‐responsive with a half‐life of 0.9, 0.6, and 0.2 hours at pH 6, 5, and 4, respectively.     

Cross‐Linking Density and Temperature Effects on the Self‐Assembly of SiO2—PNIPAAm Core–Shell Particles at Interfaces

SiO₂–PNIPAAm core–shell microgels (PNIPAAm=poly(N‐isopropylacrylamide)) with various internal cross‐linking densities and different degrees of polymerization were prepared in order to investigate the effects of stability, packing, and temperature responsiveness at polar–apolar interfaces. The effects were investigated using interfacial tensiometry, and the particles were visualized by cryo‐scanning electron microscopy (SEM) and scanning force microscopy (SFM). The core–shell particles display different interfacial behaviors depending on the polymer shell thickness and degree of internal cross‐linking. A thicker polymer shell and reduced internal cross‐linking density are more favorable for the stabilization and packing of the particles at oil–water (o/w) interfaces. This was shown qualitatively by SFM of deposited, stabilized emulsion droplets and quantitatively by SFM of particles adsorbed onto a hydrophobic planar silicon dioxide surface, which acted as a model interface system. The temperature responsiveness, which also influences particle–interface interactions, was investigated by dynamic temperature protocols with varied heating rates. These measurements not only showed that the particles had an unusual but very regular and reversible interface stabilization behavior, but also made it possible to assess the nonlinear response of PNIPAAm microgels to external thermal stimuli.     

具有温度响应壳层的金纳米粒子的制备

利用可逆-加成断裂链转移聚合得到全亲水性的嵌段共聚物(PEO-b-PNIPAM), 通过"grafting to"使其接枝到金纳米粒子表面. 通过透射电子显微镜、 紫外-可见吸收光谱、 能谱分析及动态光散射研究了杂化的金纳米粒子的壳层结构及温度响应行为. 实验结果表明, 得到核壳结构的金纳米粒子, 同时其壳层具有温度响应行为. 随着温度的升高, 其流体力学半径略有减小. 在整个升温过程中, 由于外层PEO链段的抑制作用, 没有发生粒子间的聚集.     

Preparation of Polyamide‐6 Submicrometer‐Sized Spheres by In Situ Polymerization

Polyamide‐6 (PA6) submicron‐sized spheres are prepared by two steps: (1) anionic ring‐opening polymerization of ε‐caprolactam in the presence of poly(ethylene glycol)‐block‐poly‐(propylene glycol)‐block‐poly(ethylene glycol)(PEG‐b‐PPG‐b‐PEG) and (2) separation of PA6 spheres by dissolving PEG‐b‐PPG‐b‐PEG from the prepared blends. The PA6 microspheres obtained are regular spherical, with diameter ranging from 200 nm to 2 μm and narrow size distribution, as confirmed by scanning electron microscopy. By comparison with PA6/PS and PA6/PEG systems, it is denominated that the PEG blocks in PEG‐b‐PPG‐b‐PEG can effectively reduce the surface tension of PA6 droplets and further decrease the diameter of the PA6 microspheres. The PPG block in PEG‐b‐PPG‐b‐PEG can prevent the PA6 droplets coalescing with each other, and isolated spherical particles can be obtained finally. The phase inversion of the PA6/PEG‐b‐PPG‐b‐PEG blends occurs at very low PEG‐b‐PPG‐b‐PEG content; the PEG‐b‐PPG‐b‐PEG phase can be removed by water easily. The whole experiment can be finished in a short time (approximately in half an hour) without using any organic solvents; it is an efficient strategy for the preparation of submicron‐sized PA6 microspheres.

     

Synthesis of a thermoresponsive shell‐crosslinked 3‐layer onion‐like polymer particle with a hyperbranched polyglycerol core

A novel thermoresponsive shell crosslinked three‐layer onion‐like polymer particles were prepared using hyperbranched polyglycerol (PG) as parents compound, the periphery hydroxyl groups of PG were transformed into trithiocarbonates (? SC(S)S? ) first; then, it was used as chain transfer agent to prepare star‐like block copolymer of N‐isopropyl acrylamide (NIPA) and N,N‐dimethylaminoethyl acrylate (DMA) in sequence via reversible addition fragmentation chain transfer (RAFT) process. Thus, a three‐layer polymer, PG? [SC(S)S? (DMA)? b? (NIPA)]_n, was obtained. The middle layer of poly(DMA) was then crosslinked with 1,8‐diiodoctane, and the resulting onion‐like three‐layer polymer showed a lower critical solution temperature (LCST) in water because of the outer layer of poly(NIPA). The LCST value only slightly depended on the crosslinking degree. Finally, the ? SC(S)S? were transformed into thiols by sequential treating with sodium borohydride and formic acid; thus, the core molecule was chemically detached from the crosslinked shell and a novel shell crosslinked polymer particle was obtained. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5652–5660, 2005     

Preparation of Polystyrene‐Poly(N‐isopropylacrylamide) (PS‐PNIPA) Core‐Shell Particles by Photoemulsion Polymerization

Summary: Monodisperse thermosensitive PS‐NIPA core‐shell particles composed of a PS core and a cross‐linked PNIPA shell can be successfully synthesized by a novel method: photoemulsion polymerization. Cryo‐TEM images indicate clearly the core‐shell morphology of the PS‐NIPA particles: A homogeneous regular PNIPA shell has been affixed on the spherical PS core. DLS measurements indicate that the obtained PS‐NIPA latex particles are thermosensitive. The shell of PNIPA networks with different cross‐linking densities can shrink and re‐swell with temperature and the volume transition temperature is around 32 °C in all cases.

Cryo‐TEM image of PS‐NIPA core‐shell particles.     

Silver Nanoparticles Stabilized by Thermoresponsive Microgel Particles: Synthesis and Evidence of an Electron Donor‐Acceptor Effect

Well‐dispersed silver nanoparticles were successfully fabricated within poly[(N‐isopropylacrylamide)‐co‐(acrylic acid)] [P(NIPAM‐co‐AA)] microgel particles which were synthesized with different cross‐linking densities. Their structures were studied by field‐emission scanning electron microscopy, transmission electron microscopy, UV‐vis spectroscopy, X‐ray diffraction and FT‐IR spectroscopy. The interactions between the microgel particles and the incorporated silver nanoparticles were investigated by X‐ray photoelectron spectroscopy. The results revealed that there was charge transfer from the carbonyl groups of the microgel particles to the silver nanoparticles. Moreover, as the diameter of the AgNPs decreases, the charge‐transfer efficiency increases accordingly. The P(NIPAM‐co‐AA)/AgNPs hybrid microgel particles were thermoresponsive and their behavior completely reversible with several heating/cooling cycles.