Binary Reactive/Inert Non‐Fouling Polymeric Surfaces

Binary reactive/inert antifouling polymer brushes were grafted via a two step surface initiated polymerization from printed initiator monolayer and provided robust, effective polymeric surfaces for bioattachment with distinguishably reduced non‐specific adsorption. This synthetic strategy can be harnessed to build complex binary polymeric structures on substrate surfaces and the polymer brush surfaces reported in the present paper can be widely used for versatile biological study.

     

Collapse of Cylindrical Brushes with 2‐Isopropyloxazoline Side Chains Close to the Phase Boundary

A high‐molar‐mass cylindrical brush polymer with a main chain degree of polymerization of P_w = 1047 is synthesized by free‐radical polymerization of a poly‐2‐isopropyloxazoline macromonomer with P_n = 28. The polymerization is conducted above the lower phase transition temperature of the macromonomer, i.e., in the phase‐separated regime, which provides a sufficiently concentrated macromonomer phase mandatory to obtain high‐molar‐mass cylindrical brushes. Upon heating to the phase transition temperature, the hydrodynamic radius is observed to shrink from 34 to 27 nm. Further increase in temperature resulted in aggregated chains which were observed to coexist with single chains until eventually only aggregates of μm size were detectable.

     

Controlled Radical Ab Initio Emulsion Polymerization of n‐Butyl Acrylate by Reverse Iodine Transfer Polymerization (RITP): Effect of the Hydrolytic Disproportionation of Iodine

Summary: Controlled radical polymerization of n‐butyl acrylate by reverse iodine transfer polymerization (RITP) was achieved in ab initio emulsion polymerization to yield a stable and uncolored latex (particle diameter d_p = 106 nm). Hydrolysis of iodine, I₂, was responsible for an upward deviation from the targeted molecular weight = 10 400 g · mol⁻¹. The iodide concentration [I⁻] was followed by an iodide selective electrode and the amount of efficient iodine (33%) was successfully correlated with the experimental molecular weight = 31 000 g · mol⁻¹. Finally, a simplified mechanism of RITP in ab initio emulsion polymerization taking into account the iodine hydrolysis was proposed.

Evolution of molecular weight and polydispersity index in RITP of BuA in ab initio emulsion.     

Observation of Regime III Crystallization in Polyethylene/Montmorillonite Nanocomposites

Summary: Exfoliated and intercalated polyethylene/montmorillonite (PE/MMT) nanocomposites with high MMT content were prepared by in situ polymerization. The isothermal crystallization kinetics of the nanocomposites were analyzed with Lauritzen–Hoffman regime theory. Regime III crystallization, which is difficult to observe in linear polyethylene, appears in the PE/MMT nanocomposites. The broader temperature range of regime III crystallization in PE/MMT nanocomposites shows that the mobility and reptation ability of the PE chains are greatly reduced by the MMT, especially in the intercalated nanocomposite.

Plots of ln K/n + U*/R(T_c − T₀) against 1/T_c(ΔT)f for the intercalated and exfoliated PE/MMT nanocomposites.     

Polyimide/Diamond Nanocomposites: Microstructure and Indentation Behavior

Polyimide/diamond nanocomposites have been synthesized from 4,4′‐diaminodiphenyl ether (ODA) and 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA). All the polyimides show non‐crystalline X‐ray diffraction. The frequent occurrence of particular interatomic distances (R) denoted by the non‐crystalline X‐ray diffraction maxima are determined. An ultramicro‐indentation technique is employed to evaluate the effects of nano‐diamond particles on the indentation behavior of polyimides. Indentation size effect is observed and discussed.

     

Two Methods to Generate Multiple Compositions in Combinatorial Ink‐Jet Printing of Ceramics

Summary: Combinatorial exploration of material compositions and associated informatics having influenced medicinal chemistry are now transforming the material sciences. In ceramic science, both thin and thick film combinatorial techniques are available. Ink‐jet printing provides a pathway to the latter. Mixing behind the nozzle and in front of the nozzle in well plates is described here. Such instruments are described and compared, and compositional calibration details for both are given.

Calibration library printed from a ceramic ternary system.     

Solvent Resistant Honeycomb Films from Photo‐Crosslinkable Polycinnamate

Microporous films consisting of two‐dimensionally ordered void structures ‐ so‐called honeycomb films ‐ were produced by evaporation of polymer solutions under high humidity. Two types of poly(vinyl cinnamate)s were used: A newly synthesized amphiphilic poly(vinyl cinnamate) and a mixture of a commercial poly(vinyl cinnamate) and an amphiphilic polyion complex. Photo‐crosslinking of the honeycomb structure could be achieved by UV irradiation while completely retaining the film morphology. The crosslinked films showed excellent stability against organic solvents.

     

Polypeptoids by Living Ring‐Opening Polymerization of N‐Substituted N‐Carboxyanhydrides from Solid Supports

The nucleophilic living ring‐opening polymerization of N‐substituted glycine N‐carboxyanhydrides using solid‐phase synthesis resins is reported. By variation of experimental parameters, products with near Poisson distributions are obtained. As opposed to reversible deactivation radical polymerization, the living polymerization is demonstrated to be viable to high monomer conversion and through multiple monomer addition steps. Successful preparation of a multiblock copolypeptoid is proof for a highly living and robust character of the solid‐phase peptoid polymerization.

     

Aqueous RAFT Polymerization of Acrylamide and N,N‐Dimethylacrylamide at Room Temperature

Summary: The first example of a room temperature reversible addition‐fragmentation chain transfer polymerization conducted directly in aqueous media is detailed. Under these conditions acrylamide and N,N‐dimethylacrylamide may be polymerized in a controlled fashion to near quantitative conversions employing a difunctional trithiocarbonate chain transfer agent (CTA). Hydrolysis studies conducted at pH 5.5 suggest that the CTA is stable up to approximately 50 °C.

     

Synthesis of Long‐Circulating,Backbone Degradable HPMA Copolymer–Doxorubicin Conjugates and Evaluation of Molecular‐Weight‐Dependent Antitumor Efficacy

Backbone degradable, linear, multiblock N‐(2‐hydroxypropyl)methacrylamide (HPMA) copolymer–doxorubicin (DOX) conjugates are synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization followed by chain extension via thiol‐ene click reaction. The examination of molecular‐weight‐dependent antitumor activity toward human ovarian A2780/AD carcinoma in nude mice reveals enhanced activity of multiblock, second‐generation, higher molecular weight conjugates when compared with traditional HPMA copolymer–DOX conjugates. The examination of body weight changes during treatment indicates the absence of non‐specific adverse effects.

     

A Novel High Throughput Method to Investigate Polymer Dissolution

The dissolution behavior of polystyrene (PS) in biodiesel was studied by developing a novel high throughput approach based on Fourier‐transform infrared (FTIR) microscopy. A multiwell device for high throughput dissolution testing was fabricated using a photolithographic rapid prototyping method. The dissolution of PS films in each well was tracked by following the characteristic IR band of PS and the effect of PS molecular weight and temperature on the dissolution rate was simultaneously investigated. The results were validated with conventional gravimetric methods. The high throughput method can be extended to evaluate the dissolution profiles of a large number of samples, or to simultaneously investigate the effect of variables such as polydispersity, crystallinity, and mixed solvents.

     

Volumetric Changes of Randomly Crosslinked Model Networks

Equilibrium P–V–T properties of randomly crosslinked amorphous polymer networks are modeled via molecular dynamics simulation for connectivity ratios between 1.0 and 1.5. The relation between connectivity ratio and network shrinkage is studied over a wide range of temperatures and pressures. The simulation results are compared to a mean‐field Flory–Huggins lattice model.

     

Yeasts as Producers of Polyhydroxyalkanoates: Genetic Engineering of Saccharomyces cerevisiae

The genes of the poly(β-hydroxybutyrate) (PHB) synthesis pathway in Ralstonia eutropha and Methylobacterium extorquens were successfully established in the yeast Saccharomyces cerevisiae. Expression of just the polyhydroxyalkanoate (PHA) synthase gene in some experiments, and all three PHB genes (i.e., the genes encoding β-ketothiolase, acetoacetyl-CoA reductase, and PHA synthase) in others, were detected in S. cerevisiae. Thus, it can be used as a “cell factory” for the production of PHB. The maximum amount of polyester accumulated was 6.7% (wt./wt.) when all three genes were expressed. The amount of polymer accumulated in the transgenic yeast harboring just the PHA synthase gene was similar (5.2%), but slightly lower, indicating the necessity of expressing all three genes for high PHB contents in the cells. For viable production of the polymer in yeasts, more needs to be learned about the metabolism of the yeast, especially about the pathways and intermediates competing with formation of the biopolymer. Another host probably needs to be chosen.

Bacteria (on the top) with PHB inclusions and yeasts with storage compounds (on the bottom).     

Encapsulation of Bovine Serum Albumin in Temperature‐Programmed “Shell‐in‐Shell” Structures

A novel approach to load a hydrophilic bovine serum albumin into drug carriers was proposed in terms of temperature‐programmed “shell‐in‐shell” structures, which were fabricated with poly(N‐isopropylacrylamide), poly(lactide), poly(ethylene glycol), and Au nanoparticles. Spherically well‐defined “shell‐in‐shell” structures were constructed by a modified‐double‐emulsion method (MDEM). The lower critical solubility temperature of the structures was manipulated to 36.4 °C which was confirmed by UV/Vis spectroscopy and DSC (Differential Scanning Calorimetry).

TEM image of the Au@PLLA‐PEG@PNIPAAm‐PDLA structure.     

Theoretical Study of Twin Polymerization – From Chemical Reactivity to Structure Formation

Twin polymerization is a novel technique for synthesizing hybrid polymers with domain sizes in the nanometer range. While a broad variety of monomers have been investigated, the mechanistic details and the most important influences on the nanostructure formation are unknown. A scale bridging approach is presented to simulate the twin polymerization of 2,2'‐spirobi[4H‐1,3,2‐benzodioxasiline]. This approach is based on detailed quantum chemical calculations that yield insight into reactivity and structure at the molecular level while the kinetics of the network formation process and the influences that govern structure formation are investigated at the mesoscopic level by a coarse‐grained simulation.

     

Water‐Soluble Methyl Orange Fibrils as Versatile Templates for the Fabrication of Conducting Polymer Microtubules

One‐dimensional methyl orange fibrils can be easily prepared. They are stable in acidic aqueous solutions and soluble in neutral water. When used to synthesize conducting polymer microtubules, the fibrils act as “hard templates” formally but as “soft templates” effectively. Microtubular structures of polypyrrole, polyaniline, and poly(3,4‐ethylenedioxythiophene) have been achieved successfully via such water‐soluble versatile templates.

     

Application of Electrospray Ionization Mass Spectrometry to the Elucidation of the Primary Structure of Lignin

Electrospray ionization mass spectrometry (ESI‐MS) was successfully applied to the structural analysis of lignin. The structure of oligomers fractionated from Eucalyptus globulus dioxane lignin was elucidated using tandem mass spectrometry, and the information on fragmentation patterns was provided by experiments on dimeric model compounds. Data obtained revealed a significant abundance in the lignin macromolecules of linear fragments that were composed of 8‐O‐4′‐linked syringyl/guaiacyl units and syringaresinol.

The proposed linear fragment of the E. globulus lignin molecule.