This review article describes the preparation of polymer brushes by nitroxide‐mediated radical polymerization using either the ‘grafting to’ or the ‘grafting from’ approach. The use of TEMPO as a classical initiator is intensively described. More sophisticated nitroxides are also included in the discussion. Brush formation on flat surfaces such as wafers and also on particles is reported. Finally, some applications of polymer brushes are presented.
Water‐soluble single‐ and multi‐walled carbon nanotubes (CNTs) were prepared by grafting polyacrylamide chains from the graphitic surface via ceric ion‐induced redox radical polymerization. The reducing functionalities were covalently attached to the tubes by peroxide‐assisted radical reaction. The results showed that polymer chains were grafted onto CNTs by the redox process. The redox radical polymerization initiated by carbon nanotube‐bearing functionalities not only provides a powerful strategy for modifying the carbon nanostructures but also gives us the knowledge of their sidewall chemistry.
We present a computer study of the association behavior of copolymer chains with a gradient part and soluble tail of variable length. As a simulation method we use dynamic Monte Carlo simulation on a simple cubic lattice with pair interaction parameters. The solvent quality and selectivity is modeled by the variation of pair interaction parameters between nearest neighbors on the lattice. The role of the length of soluble part in the self‐assembly and its effect on the structure of aggregates was the main goal of this work. The size and structure of aggregates were analyzed using an improved topological classification method which has been developed and tested in the present study. The structure and association numbers of aggregates were compared with those of linear diblock copolymers.
Organic π‐conjugated polymers have emerged as one of the most fascinating classes of materials as they have found utility in a host of plastic electronics technologies. The distance between π‐systems and their relative orientation dictate energy/charge transfer, conductivity, and photophysical properties of these materials in bulk. This Feature Article discusses π‐conjugated polymers and model compounds in which specific inter‐π‐system interactions are covalently enforced and the effect that the scaffolding has on optoelectronic properties.
Summary: A series of 7 homogeneous ethylene‐propylene copolymers is modeled by a Bernoullian, a terminal, a penultimate and a third order Markov model and it is found that the penultimate model describes this series best. The Bernoullian and terminal model prove to be insufficient and the third order Markov model is statistically not justified. Based on these results, a criterion to select the optimal Markovian order of homogeneous, single site catalyst produced copolymers is developed.
Schematic of the [(3‐MePh)(4‐MePh)C(2,7‐di‐tert‐BuFlu)(Cp)]ZrCl2 metallocene copolymerizing ethene and propene. 相似文献
The shielding effect of nano TiO2 on collagen under UV radiation was investigated using UV spectrophotometry. The results indicate that the shielding of collagen under UV radiation in the presence of nano TiO2 is significant. For 2.5 wt.‐% of TiO2, there is a greater shielding effect of UV radiation than that for 0.5 wt.‐% of TiO2. In addition, this study gives hints that a novel tanning agent with a UV shielding function can be formulated by using nano TiO2.
UV absorption of collagen under UV radiation after adding 2.5 wt.‐% TiO2. 相似文献
Functional polymers possess tremendous potential both in academia and in industry. In particular, oxiranes offer manifold possibilities for the introduction of single hydroxyl or multiple orthogonal functionalities in carbanionic polymerization. Here, we present a brief overview of the fascinating possibilities arising from the employment of common as well as individually designed epoxide derivatives for the synthesis of end‐functional polymers. Continuous flow techniques can be utilized for the rapid generation and screening of precisely defined hydroxyl‐modified polymers. The utilization of functionalized polymers as precursors for the formation of complex macromolecular architectures (e.g., miktoarm star polymers) is summarized and potential applications as well as future perspectives are discussed.
Summary: A simple method for the fabrication of a chemical composition gradient from organic to inorganic by the pyrolysis of a polymethylsilsesquioxane (PMSQ) thin film in a gradient temperature field is reported. The resultant chemical gradient surface demonstrates gradual changes in wettability, and slight microstructural changes are observed along the substrate.
FT‐IR spectra of gradient PMSQ surface along the length from the unheated side to the heated side. 相似文献
The random end linking of different amounts of trifunctional crosslinkers with 3 000 prepolymer linear chains, with length varying from 10 to 30 monomers, to form networks at different system number densities was dynamically simulated by the molecular dynamics method. Investigation of the crosslinking kinetics shows that, with a stoichiometric number of crosslinkers present, the time evolution of free ends fraction decays as a power law in time t−3/4. This scaling behavior is different from the one in a dense polymer melt. Structural analyses of the resulting networks indicate that the imperfections of the network structure strongly depend on the initial synthesis conditions including the initial system number density and the ratio of crosslinkers to precursor polymer chain ends.
A direct access to photochromic polymeric vesicles was demonstrated via polymerization‐induced self‐assembly and reorganization (PISR). The resulting vesicles displayed interesting photochromic behaviors different from that of their free polymer chains in DMF, and the vesicles exhibited stronger fluorescence and excellent photostability due to confinement of conformational flexibility of the polymer chains in aggregates.
Summary: Polypyrrole nanotubes with high electric conductivity and azo function have been fabricated in high yield via an in‐situ polymerization. During the process fibrillar complex of FeCl3 and methyl orange (MO), acting as a reactive self‐degraded template, directed the growth of polypyrrole on its surface and promoted the assembly into hollow nanotubular structures.
TEM image of uncompleted PPy nanotubes synthesized in MO solutions after reaction for 40 min. 相似文献
Anionic conjugated polymer (PFP‐SO) was assembled with a novel enzymatic substrate 6‐O‐modified PNP‐β‐galactoside ( 1 ) for sensitive multiplex enzyme detections. The PFP‐SO/ 1 /lipase/β‐galactosidase system has two chemical input signals which are Input 1 (lipase) and Input 2 (β‐galactosidase), and output optical signals such as fluorescence emission at 416 nm or 450 nm. Four types of logic gates, including YES, INH, NAND and AND, were successfully constructed and utilized for multiplex detections of lipase and β‐galactosidase in one tube.
The complex formation of oppositely charged surfactants with some polypeptides is known to induce β‐sheet or helix formation. Here, we report on the complex formation of cylindrical brush polymers with poly(L ‐lysine) side chains and sodium dodecylsulfate (SDS). With increasing amount of added surfactant the cylindrical polymers first adopt a helical conformation with a pitch of approximately 14–24 nm followed by a spherically collapsed structure before eventually precipitation occurs. CD measurements suggest that the helix formation of the cylindrical brush polymers is driven by the hydrophobicity of the β‐sheets formed by the PLL side chain–SDS complexes.
Summary: A superhydrophobic coating was facilely fabricated in one step by casting bisphenol A polycarbonate (PC) solution under moisture. Vapor‐induced phase separation occurred during the solidifying process and a rough surface with a micro‐nano‐binary structure (MNBS) similar to the microstructure shown on lotus leaf was formed.
A new route consisting of simultaneous centrifugal spinning and solution blowing to form polymer nanofibers is reported. The fiber diameter (60–1000 nm) is shown to be a function of polymer concentration, rotational speed, and working pressure of the processing system. The fiber length is dependent on the rotational speed. The process can deliver 6 kg of fiber per hour and therefore offers mass production capabilities compared with other established polymer nanofiber generation methods such as electrospinning, centrifugal spinning, and blowing.
Furan ring‐functionalized solid surfaces are achieved by the initiated chemical vapor deposition (iCVD) method, a solvent‐free process to form films under mild conditions. The polymerization of furfuryl methacrylate monomer is initiated by a resistively heated filament wire. The functionality of the furan group in the iCVD film enabled Diels–Alder chemistry with 4‐phenyl‐1,2,3‐triazolin‐3,5‐dione (N‐PTD).
Conformational analysis of macromolecular structures reveals interesting higher‐order spatial arrangements. Analyzing these features as a function of time provides insights into the dynamical behavior of these systems and the identification of relevant subdomains. We present some visual‐analytic methods that we devised to explore the spatial‐temporal properties from molecular dynamics simulation data. These methods automatically detect common features and connect them to properties of interest. These methods yield physical insights that are not easily obtainable with existing methods for particle simulation data, as illustrated for polyacetylene interacting with a carbon nanotube.
