Application of surface‐enhanced Raman spectroscopy (SERS) to the analysis of natural resins in artworks

Surface‐enhanced Raman spectroscopy (SERS) is rapidly growing as an analytical technique for the detection of extremely low concentrations of analytes. The analysis of natural resins from artworks is often restricted by sample size constraints in general, and Raman spectroscopy in particular is hampered by fluorescence when using visible irradiation wavelengths. This work demonstrates that SERS is able to overcome interference from fluorescence in such samples using the incident wavelength 514.5 nm, to allow collection of SERS spectra from extremely small samples. Characterisation of the natural resin surface coating from a painting by Tiepolo is discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Strategy for improved analysis of peptides by surface‐enhanced Raman spectroscopy (SERS) involving positively charged nanoparticles

A strategy for improved surface‐enhanced Raman spectroscopy (SERS) measurements that extends the variety of analytes accessible to SERS analysis is developed. The strategy involves inducing aggregation by mixing positively charged nanoparticles which form SERS‐active clusters when mixed with negatively charged silver nanoparticles fabricated using the Lee–Meisel process. To make positively charged nanoparticles, silver nanoparticles using the traditional Lee–Meisel process are fabricated and coated with a thin layer of silica and the silica modified with silane chemistry. Analytes with a significant amount of negative charge exhibit strong Raman bands when the strategy using these fabricated, positively charged nanoparticles for inducing cluster formation is used, enabling their detection and analysis. We envision the use of positively charged nanoparticles in cluster formation for expanding the range of analytes that can be detected using SERS and hence the range of applications SERS can play a role in. Copyright © 2008 John Wiley & Sons, Ltd.     

Multianalyte immunoassay based on surface‐enhanced Raman spectroscopy

In this paper, two immunoassay methods based on SERS are developed for multiplex analysis, both of which stemmed from the concept of forming a sandwich structure ‘capture antibody substrate/antigen/Raman‐reporter‐labeled immuno‐nanoparticles’. They are two‐molecule labeled one‐nanoparticle and one‐molecule labeled two‐nanoparticle methods. In both the methods, two different antibodies covalently bound to a solid substrate can specifically capture two different antigens from a sample. The captured antigens in turn bind selectively to their corresponding antibodies immobilized on Raman‐reporter‐labeled nanoparticles. Multianalyte immunoassay is successfully demonstrated by the detection of characteristic Raman bands of the probe molecules only when the antigen and antibody are matched. Copyright © 2007 John Wiley & Sons, Ltd.     

Experimental and statistical analysis methods for peptide detection using surface‐enhanced Raman spectroscopy

Surface‐enhanced Raman spectroscopy (SERS) has the potential to make a significant impact in biology research due to its ability to provide information orthogonal to that obtained by traditional techniques such as mass spectrometry (MS). While SERS has been well studied for its use in chemical applications, detailed investigations with biological molecules are less common. In addition, a clear understanding of how methodology and molecular characteristics impact the intensity, the number of peaks, and the signal‐to‐noise of SERS spectra is largely missing. By varying the concentration and order of addition of the SERS‐enhancer salt (LiCl) with colloidal silver, we were able to evaluate the impact of these variables on peptide spectra using a quantitative measure of spectra quality based on the number of peaks and peak intensity. The LiCl concentration and order of addition that produced the best SERS spectra were applied to a panel of synthetic peptides with a range of charges and isoelectric points (pIs) where the pI was directly correlated with higher spectral quality. Those peptides with moderate to high pIs and spectra quality scores were differentiated from each other using the improved method and a hierarchical clustering algorithm. In addition, the same method and algorithm was applied to a set of highly similar phosphorylated peptides, and it was possible to successfully classify the majority of peptides on the basis of species‐specific peak differences. Copyright © 2008 John Wiley & Sons, Ltd.     

Gold‐coated zinc oxide nanowire‐based substrate for surface‐enhanced Raman spectroscopy

Zinc oxide nanowires with two distinct morphologies were synthesized on silicon substrates using a simple thermal evaporation and vapor transport method in an oxidizing environment. The as‐synthesized nanowires were coated with gold to allow excitation of surface plasmons over a broad frequency range. SERS studies with near‐IR excitation at 785 nm showed significant enhancement (average enhancement > 10⁶) with excellent reproducibility to detect monolayer concentrations of 4‐methylbenzenethiol (4‐MBT) and 1,2‐benzendithiol (1,2‐BDT) probe molecules. The Raman enhancement showed a strong dependence on the gold film thickness, and the peak enhancement was observed for a ∼40‐nm‐thick film. The Raman enhancement was stronger for randomly oriented nanowires compared to aligned ones suggesting the importance of contributions from the junctions of nanowires. Copyright © 2009 John Wiley & Sons, Ltd.     

Detection of melamine in liquid milk using surface‐enhanced Raman scattering spectroscopy

Melamine, a nitrogen‐rich chemical, has recently caused enormous economic losses to the food industry due to the cases of milk products adulterated by melamine. This has led to an urgent need of rapid and reliable methods for detection of melamine in food. In this study, surface‐enhanced Raman scattering (SERS) spectroscopy was used to detect melamine in liquid milk. The sample preparation with liquid milk is very easy; it has to be only diluted with double‐distilled water followed by centrifugation. By using a silver colloid, at least a 10⁵‐fold enhancement of the Raman signal was achieved for the measurement of melamine. The limit of detection by this method was 0.01 µg ml⁻¹ for melamine standard samples. Based on the intensity of the Raman vibrational bands normalised to that of the band at 928 cm⁻¹ (CH₂), an external standard method was employed for quantitative analysis. The linear regression square (R²) of the curve was 0.9998; the limit of quantitation using this approach was 0.5 µg ml⁻¹ of melamine in liquid milk; the relative standard deviation was ≤10%; and recoveries were from 93 to 109%. The test results for SERS were very precise and as good as those obtained by liquid chromatography/tandem mass spectrometry. The method was simple, fast(only needs about 3 min), cost effective, and sensitive for the detection of melamine in liquid milk samples. Therefore, it is more suitable for the field detection of melamine in liquid milk. Copyright © 2010 John Wiley & Sons, Ltd.     

Characterization of polycyclic aromatic hydrocarbons using Raman and surface‐enhanced Raman spectroscopy

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous atmospheric pollutants and food contaminants, which exhibit potent carcinogenicity, mutagenicity, and teratogenicity. Vibrational spectroscopy techniques, especially Raman spectroscopy and surface‐enhanced Raman spectroscopy (SERS), can be potentially used as an alternative technique to liquid and gas chromatography in PAH analysis. However, there is limited information on the intrinsic Raman and SERS fingerprints of PAHs. In this study, we have acquired the Raman and SERS spectra of seven PAH compounds and compared their experimental spectra with theoretical Raman spectra calculated by density function theory (DFT). The vibrational modes corresponding to the Raman peaks have also been assigned using DFT. Characteristic Raman and SERS peaks have been identified for five PAH compounds, and the limits of detection were estimated. Such information could be useful for developing SERS assays for simple and rapid PAH identification. Copyright © 2014 John Wiley & Sons, Ltd.     

Silica‐overcoated substrates for detection of proteins by surface‐enhanced Raman spectroscopy

Ag film over nanosphere (AgFON) substrates for surface‐enhanced Raman spectroscopy (SERS) are shown to be ineffective for the detection of proteins in phosphate buffer solution (PBS) because of the decomposition of the substrate resulting in a total loss of SERS activity. However, modification of these substrates with SiO₂ overlayers overcomes this problem. The SiO₂ overlayers are produced by filtered arc deposition (FAD) and are characterised by atomic force microscopy (AFM). Their porosity is examined using Raman spectroscopy and the detection of cytochrome c and bovine serum albumin in PBS is successfully demonstrated. These findings show promise for the detection of proteins in biologically relevant conditions using Ag‐based SERS substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

Microstructured polymer‐based substrates with broadband absorption for surface‐enhanced Raman scattering

Large area (3 × 3 cm²) substrates for surface‐enhanced Raman scattering were fabricated by combining femtosecond laser microstructuring and soft lithography techniques. The fabrication procedure is as follows: (i) femtosecond laser machining is used to create a silicon master copy, (ii) replicates from polydimethylsiloxane are made, and (iii) a 50‐nm‐thick gold film is deposited on the surface of the replicates. The resulting substrates exhibit strongly enhanced absorption in the spectral region of 350 ∼ 1000 nm and generate enhanced Raman signal with enhancement factor of the order of 10⁷ for 10^{‐ 6} M rhodamine 6G. The main advantages of our substrates are low cost, large active area, and possibility for mass replication. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterization of sodium alginate and its block fractions by surface‐enhanced Raman spectroscopy

The surface‐enhanced Raman scattering (SERS) of sodium alginates and their hetero‐ and homopolymeric fractions obtained from four seaweeds of the Chilean coast was studied. Alginic acid is a copolymer of β‐D ‐mannuronic acid (M) and α‐L guluronic acid (G), linked 1 → 4, forming two homopolymeric fractions (MM and GG) and a heteropolymeric fraction (MG). The SERS spectra were registered on silver colloid with the 632.8 nm line of a He Ne laser. The SERS spectra of sodium alginate and the polyguluronate fraction present various carboxylate bands which are probably due to the coexistence of different molecular conformations. SERS allows to differentiate the hetero‐ and homopolymeric fractions of alginic acid by characteristic bands. In the fingerprint region, all the poly‐D ‐mannuronate samples present a band around 946 cm⁻¹ assigned to C O stretching, and C C H and C O H deformation vibrations, a band at 863 cm⁻¹ assigned to deformation vibration of β‐C₁ H group, and one at 799–788 cm⁻¹ due to the contributions of various vibration modes. Poly‐L ‐guluronate spectra show three characteristic bands, at 928–913 cm⁻¹ assigned to symmetric stretching vibration of C O C group, at 890–889 cm⁻¹ due to C C H, skeletal C C, and C O vibrations, and at 797 cm⁻¹ assigned to α C₁ H deformation vibration. The heteropolymeric fractions present two characteristic bands in the region with the more important one being an intense band at 730 cm⁻¹ due to ring breathing vibration mode. Copyright © 2009 John Wiley & Sons, Ltd.     

pH‐sensing nanostar probe using surface‐enhanced Raman scattering (SERS): theoretical and experimental studies

Local pH environment has been considered to be a potential biomarker for tumor diagnosis because solid tumors contain highly acidic environments. A pH‐sensing nanoprobe based on surface‐enhanced Raman scattering (SERS) using nanostars under near‐infrared excitation has been developed for potential biomedical applications. To theoretically investigate the effect of protonation state on SERS spectra of p‐mercaptobenzoic acid (pMBA), we used the density functional theory (DFT) with the B3LYP functional to calculate Raman vibrational spectra of pMBA‐Au/Ag complex in both protonated and deprotonated states. Vibrational spectral bands were assigned with DFT calculation and used to investigate SERS spectral changes observed from experiment when varying pH value between five and nine. The SERS peak position of pMBA at ~1580 cm⁻¹ was identified to be a novel pH‐sensing index, which has small but noticeable downshift with pH increase. This phenomenon is confirmed and well‐explained with theoretical simulation. The study demonstrates that SERS is a sensitive tool to monitor minor structural changes due to local pH environment, and DFT calculations can be used to investigate Raman spectra changes associated with minor differences in molecular structure. Copyright © 2013 John Wiley & Sons, Ltd.     

Quick detection of contaminants leaching from polypropylene centrifuge tubes with surface‐enhanced Raman spectroscopy and ultraviolet absorption spectroscopy

Anomalous surface‐enhanced Raman scattering (SERS) peaks were identified for liquid sample stored in polypropylene (PP) centrifuge tubes for months. We observed unexpected Raman peaks during experiments with thiamine hydrochloride aqueous solutions stored in PP tubes for 2 months. In order to identify the contaminants, we have performed SERS experiments on deionized (DI) water stored in PP centrifuge tubes for 2 months and compared them with those from fresh DI water sample. We have also carried out ultraviolet (UV) absorption spectra for both fresh and contaminated water. We believe that the water is contaminated because of chemicals leaching from the PP tube. From the gas chromatography‐mass spectrometry data, the main contaminants were found to be phthalic acid (PA) and its derivatives. Further SERS and UV absorption experiment for PA correlated well with the anomalous peaks identified earlier. We qualitatively confirmed the identification and quantitatively estimated the concentration of the suspect contaminants as between 1 and 10 µM with both SERS and UV absorption spectroscopy. With UV absorption spectroscopy, we precisely estimated the concentration as 2.1 µM . We have shown that the sample in PP tube can be contaminated by the leaching chemicals upon long‐term storage, and suggest SERS and UV absorption spectroscopy as two quick and simple techniques to detect the contamination. Copyright © 2011 John Wiley & Sons, Ltd.     

Vibrational and surface‐enhanced Raman spectra of vanillic acid

The 3‐methoxy‐4‐hydroxybenzoic acid or vanillic acid (VA) is a naturally occurring molecule important in winemaking. The spectral fingerprints of VA observed in the infrared and Raman spectra are assigned to fundamental vibrational wavenumbers supported by quantum chemical computations. The surface‐enhanced Raman scattering (SERS) of the VA has been obtained in silver colloidal solutions making possible analytical applications for detection of VA at picomole concentrations. Copyright © 2008 John Wiley & Sons, Ltd.     

Probing the interaction of ionic liquids with graphene using surface‐enhanced Raman spectroscopy

We report an in situ measurement of the interaction of an imidazolium‐based room temperature ionic liquid with both pure silver and a graphene‐over‐silver electrode under an applied electrochemical potential. At a negative applied potential, overall signal intensity increased indicating enhanced ionic liquid concentration at both silver and graphene electrodes. Vibrational modes associated with the imidazolium ring exhibited greater intensity enhancements and larger peak shifts compared with the anion indicating that the cation adsorbs with the ring and alkyl chain parallel to the electrode surface for both silver and graphene. In contrast to the silver, the surface enhanced Raman spectra of the ionic liquid near graphene showed shifts in the cation peaks even at no applied potential because of the strong π–π interaction between the ionic liquid and the graphene. Furthermore, the intensity of the graphene peak decreased in the presence of ionic liquid possibly due to the interaction between the ionic liquid and graphene. These results illustrate the effectiveness of surface‐enhanced Raman spectroscopy to investigate electrolyte interactions with graphene at the liquid/electrode interface. Copyright © 2015 John Wiley & Sons, Ltd.     

Raman and surface‐enhanced Raman spectra of flavone and several hydroxy derivatives

The Raman and surface‐enhanced Raman spectra (SERS) of flavone and three of its hydroxy derivatives, 3‐hydroxyflavone (3‐HF) and 5‐hydroxyflavone (5‐HF) and quercetin (3,5,7,3′,4′ pentahydroxyflavone) have been obtained. The normal Raman (NR) spectra were taken in the powder form. The SERS spectra were obtained both on Ag colloids and Ag electrode substrates. Assignments of the spectrally observed normal modes were aided by density functional theory (DFT) calculations using the B3LYP functional and the 6‐31 + G* basis, a split valence polarized basis set with diffuse functions. Excellent fits were obtained for the observed spectra with little or no scaling. The most intense lines of the NR spectra are those in the CO stretching region (near 1600 cm⁻¹). These lines are often weakened by proximity to the surface, while other lines at lower wavenumbers, due to in‐plane ring stretches, tend to be strongly enhanced. The SERS spectrum of flavone is weak both on the colloid and on the electrode, indicating weak attachment to the surface. In contrast, the SERS spectra of the hydroxy derivatives of flavone are intense, indicating the assistance of OH groups in attachment to the surface. The spectra of the various species are compared, and a case study of application to detection of a textile dye (Persian berries), which contains quercetin, is presented. Copyright © 2007 John Wiley & Sons, Ltd.     

Bacterial mixture identification using Raman and surface‐enhanced Raman chemical imaging

The ability of normal Raman and surface‐enhanced Raman scattering (SERS) to identify and detect bacteria has shown great success in recent studies. The addition of silver nanoparticles to bacterial samples not only results in an enhanced Raman signal, but it also suppresses the native fluorescence associated with biological material. In this report, Raman chemical imaging (RCI) was used to analyze individual bacteria and complex mixtures of spores and vegetative cells. RCI uses every pixel or a binned pixel group (BPG) of the Raman camera as an independent Raman spectrograph, allowing collection of spatially resolved Raman spectra. The advantage of this technique resides primarily in the analysis of samples in complex backgrounds without the need for physically isolating or purifying the sample. Using a chemical imaging Raman microscope, we compare normal RCI to SERS‐assisted chemical imaging of mixtures of bacteria. In both cases, we are able to differentiate single bacterium in the Raman microscope's field of view, with a 60‐fold reduction in image acquisition time and a factor of 10 increase in the signal‐to‐noise ratio for SERS chemical imaging over normal RCI. Copyright © 2010 John Wiley & Sons, Ltd.     

Using surface‐enhanced Raman scattering (SERS) and fluorescence spectroscopy for screening yeast extracts,a complex component of cell culture media

Yeastolate or yeast extract, which are hydrolysates produced by autolysis of yeast, are often employed as a raw material in the media used for industrial mammalian cell culture. The source and quality of yeastolate can significantly affect cell growth and production; however, analysis of these complex biologically derived materials is not straightforward. The best current method, liquid chromatography–mass spectrometry (LC‐MS), is time‐consuming and requires extensive expertise. This study describes the use of surface‐enhanced Raman scattering (SERS) and fluorescence excitation–emission matrix (EEM) spectroscopy coupled with robust principal component analysis (ROBPCA) for the rapid and facile characterization and discrimination of yeast extracts in aqueous solution. SERS using silver colloids generates time‐dependent signals, where adenine is the strongest contributor, and the spectra are stable and reproducible (< ~3%) at 180 min after mixing. Combining this spectral behavior with chemometric methods enables SERS to be used in discriminating between different yeastolate sources, for assessing lot‐to‐lot variability, and, potentially, to monitor storage‐induced compositional changes. Fluorescence EEM combined with multiway ROBPCA also provides a rapid and inexpensive method for the discrimination of yeastolate, yielding results in terms of sample discrimination very similar to that obtained with SERS. However, the EEM data does not provide the same level of chemical information that is provided by the SERS. Thus, the combination of these two methodologies has the potential to be extremely useful in biopharmaceutical manufacturing, as well as for the rapid characterization and screening of biogenic hydrolysates from animal or plant sources. Copyright © 2011 John Wiley & Sons, Ltd.     

Silver nanoparticles synthesized by direct photoreduction of metal salts. Application in surface‐enhanced Raman spectroscopy

A simple synthesis method of silver nanoparticles and its application as an active surface‐enhanced Raman spectroscopy (SERS) colloid are presented in this work. The photoreduction of AgNO₃ in presence of sodium citrate (NaCit) was carried out by irradiation with different light sources (UV, white, blue, cyan, green, and orange) at room temperature. The evaluation of silver nanoparticles obtained as a function of irradiation time (1–24 h) and light source was followed by UV‐visible absorption spectroscopy. This light‐modification process results in a colloid with distinctive optical properties that can be related to the size and shape of the particles. The Ag colloids, as prepared, were employed as active colloids in SERS. Pyridine and caffeine were used as test molecules. Copyright © 2008 John Wiley & Sons, Ltd.     

Deep‐UV tip‐enhanced Raman scattering

We report for the first time the tip‐enhancement of resonance Raman scattering using deep ultraviolet (DUV) excitation wavelength. The tip‐enhancement was successfully demonstrated with an aluminum‐coated silicon tip that acts as a plasmonic material in DUV wavelengths. Both the crystal violet and adenine molecules, which were used as test samples, show electronic resonance at the 266‐nm excitation used in the experiments. With results demonstrated here, molecular analysis and imaging with nanoscale spatial resolution in DUV resonance Raman spectroscopy can be realized using the tip‐enhancement effect. Copyright © 2009 John Wiley & Sons, Ltd.     

Label‐free optical detection of type II diabetes based on surface‐enhanced Raman spectroscopy and multivariate analysis

Surface‐enhanced Raman scattering (SERS) spectroscopy was first employed to detect oxyhemoglobin (OxyHb, the common type of hemoglobin) variation in type II diabetic development without using exogenous reagents. Using silver nanoparticles as SERS‐active substrate, high‐quality SERS spectra are obtained from blood OxyHb samples of 49 diabetic patients and 40 healthy volunteers. Tentative assignment of the observed SERS bands indicates specific structural changes of OxyHb molecule in diabetes, including heme transformation and globin variation. Furthermore, partial least squares and principal component analysis combined with linear discriminate analysis diagnostic algorithms are employed to analyze and classify the SERS spectra acquired from diabetic and healthy OxyHb, yielding the diagnostic accuracies of 90.0% and 95.5%, respectively. This exploratory work suggests that the silver nanoparticles‐based OxyHb SERS method in combination with multivariate statistical analysis has great potential for the label‐free detection of type II diabetes. Copyright © 2014 John Wiley & Sons, Ltd.