Wideband delays generated in an all-optical tunable delay line,preserving signal wavelength and bandwidth

A novel technique to produce large all-optically controlled tunable delays of 100 ps pulse train in optical fibers is demonstrated. The configuration of the delay line basically consists of two main stages: the wavelength conversion via semiconductor optical amplifiers and the group velocity delaying via a dispersive optical medium. The wavelength-converted signal was precisely delayed over a wide temporal range from picoseconds to nanoseconds using a dispersive fiber, preserving the wavelength and the bandwidth of the signal. 100 ps FWHM signal pulses were delayed continuously up to 14 ns with moderate pulse distortion, corresponding to a 140-bit delay. To cite this article: L. Thévenaz, S. Chin, C. R. Physique 10 (2009).     

Tunable slow and fast light with large bandwidth in the band-edge of gain spectrum of the wide band fiber optical parametric amplifier

We propose a novel method theoretically to generate the slow and fast light with large bandwidth and low gains, which is based on the parametric process in fiber. In our scheme, the wide band fiber optical parametric amplifier is employed and the whole signal bandwidth should be located at a certain frequency range of the band-edge of gain spectrum, and then signal waves will be delayed or advanced with low signal gains because of the peculiar feature of signal gain and phase shift. By changing the pump power, the delay time is continuously-tunable optically. The ultimate delay bandwidth and the delay bandwidth product are constrained by the shape of time delay spectrum. Our simulation verifies that 22.4 ps delay or advanced time for the bandwidth of 10 GHz with little distortion can be obtained at certain wavelengths in the optical communication waveband, and their gains are nearly zero. The tunable range is from 0 ps to 22.4 ps for the signal bandwidth of 10 GHz, and it is from 0 ps to 15.6 ps for the bandwidth of 15 GHz. This type of slow and fast light in wide band FOPA has the potential capability to produce the tunable slow and fast light for large bandwidth with low signal gains in future.     

All-optical tunable delay line based on wavelength conversion in semiconductor optical amplifiers and dispersion in dispersion-compensating fiber

We demonstrate an all-optical continuously tunable delay line system based on wavelength conversion in semiconductor optical amplifiers (SOAs), and group-velocity dispersion (GVD) in a dispersion-compensating fiber (DCF). The system operates, near 1550 nm, with a non-return-to-zero (NRZ) pattern at 10 Gb/s. A maximal optical delay up to 2700 ps is observed. The scheme achieves continuous control of a wide range of optical delays, wide signal bandwidth, nearly no pulse broadening, and very little spectral distortion.     

基于光纤电流传感器的韦尔代常数优化测量法

韦尔代常数(Verdet)是决定光纤电流传感器(FOCT)灵敏度的重要因素之一。根据萨格纳克(Sagnac)干涉原理计算得到校准信号,并测量FOCT的实际输出信号,通过比较这两组信号建立目标函数,基于单纯形算法进行参数优化,从而得到石英光纤的韦尔代常数。实验结果与经典模型计算结果基本吻合。FOCT的输出信号经过测量电路会引入相位差;另外受到调制器和外界环境的影响,干涉回路的工作点会产生漂移,导致输出信号不对称而产生直流量。考虑到以上因素,提出的这种方法还能同时测量出电路的相位差、干涉回路的工作点以及反映非线性畸变的直流量。     

高非线性微结构光纤中基于受激布里渊散射的慢光延迟

全光连续可调的慢光技术在全光网络和光信息处理等领域具有重要的应用前景. 利用自行设计并拉制的高非线性微结构光纤, 实验研究了基于受激布里渊散射的可调谐慢光延迟. 采用单抽运光和单级延迟方案, 当抽运光功率为162.6 mW时, 在长度为120 m的高非线性微结构光纤中获得了最大76 ns的延迟量, 相当于0.76个脉冲宽度. 通过调节抽运光功率的大小, 可以实现对慢光延迟量的可调谐.该慢光延迟方案具有延迟量大、 全光可调谐及与现有光通信系统兼容等优势. 关键词： 慢光 微结构光纤 受激布里渊散射     

Full-range tunable optical delay line based on coupled and side-coupled resonators

An optical delay line based on a new kind of structure comprising coupled resonators and side-coupled resonators has been proposed and demonstrated. The structure has unique advantages in realizing tunable optical delay lines. The tuning range has covered almost the full range of the optical delay line, from minimum delay at which only one ring of the light pulse structure requires transmission, to maximum delay at which all rings are required. In addition, the input signal delivered from the input to output port travels the structure twice, thereby providing buffer delay that is twice longer than general coupled resonators.     

Multiple-element photonic microwave true-time-delay beamforming incorporating a tunable chirped fiber Bragg grating with symmetrical bending technique

We experimentally demonstrate a novel scheme for a multiple-element photonic microwave true-time-delay device with high tunability based on a tunable chirped fiber Bragg grating without center wavelength shift. We achieve the different true time delay by controlling the grating period of a chirped fiber Bragg grating based on the symmetrical bending technique as a multiwavelength signal source is applied to carry microwave signals. The proposed method does not require the complex structure of systems, wavelength tuning, and synchronization of optical devices such as tunable bandpass filters and optical input signals. We achieve the tunabilty of the time delay for a microwave signal carried over an optical signal in a range from 1 to 230 ps.     

On‐chip stimulated Brillouin Scattering for microwave signal processing and generation

Demonstration of continuously tunable delay, low‐noise lasers, dynamically controlled gratings, and optical phase shifting using the stimulated Brillouin scattering (SBS) process has lead to the emergence of SBS as a promising technology for microwave photonics. On‐chip realization of SBS enables photonic integration of microwave photonic signal processing and offers significantly enhanced performance and improved efficiency. On‐chip stimulated Brillouin scattering is reviewed in the context of slow‐light based tunable delay, low‐noise narrow linewidth lasers and filtering for integrated microwave photonics. A discussion on key material and device properties, necessary to enable on‐chip Brillouin scattering using both the single‐pass and resonator geometry, is presented along with an outlook for photonic integration of microwave signal processing and generation in other platforms.     

Character analysis of slow light with communication waveband in fiber optical parametric amplifier

The comprehensive characters of delay time and delay bandwidth with distortion, signal wavelength dependence and delay bandwidth product in fiber optical parametric amplifier are investigated theoretically when the pump locates at anomalous dispersion region. The delay character of single pulse, data stream with certain bit pattern and pseudo random data stream are analyzed comprehensively. In this category of fiber optical parametric amplifier, the delay time and delay bandwidth product vary from signal wavelengths and bit rates. For the same nonlinear coefficient, pump power and fiber length, the diverse dependences of bit pattern in different signal wavelengths are found by numerical simulation. The impacts of pump power and fiber length on the delay character and distortion are also discussed. These relations are conductive to the design of slow light based on fiber optical parametric amplifier in telecommunication waveband.     

Nonlinear optical fiber based high resolution all‐optical waveform sampling

When there is a need to accurately characterize optical waveforms and, it is not surprising that some of the best, albeit only recently established, techniques to do this rely on all‐optical phenomena. Some basic reasons why all‐optical sampling holds great promise as a very useful tool well into the foreseeable future are that there are no ringing phenomena with associated waveform distortion as in electronic sampling due to impedance mismatch, and that the time resolution can be made extremely high (⩽ 1 ps) while yet also offering high sensitivity for e.g. eye diagram (a superposition of all ‘1’ and ‘0’ in a data sequence that is widely used in telecommunications testing) and statistical analysis. In this paper, we review recent developments in optical fiber‐based sampling of optical waveforms. In particular, we describe the state‐of‐the‐art in terms of the various performance measures as well as their trade‐offs.     

Investigation on performance of all optical buffer with large dynamical delay time based on cascaded double loop optical buffers

Optical buffers are critical for optical signal processing in future optical packet-switched networks. In this paper, a theoretical study as well as an experimental demonstration on a new optical buffer with large dynamical delay time is carried out based on cascaded double loop optical buffers (DLOBs). It is found that pulse distortion can be restrained by a negative optical control mode when the optical packet is in the loop. Noise analysis indicates that it is feasible to realise a large variable delay range by cascaded DLOBs. These conclusions are validated by the experiment system with 4-stage cascaded DLOBs. Both the theoretical simulations and the experimental results indicate that a large delay range of 1-9999 times the basic delay unit and a fine granularity of 25 ns can be achieved by the cascaded DLOBs. The performance of the cascaded DLOBs is suitable for the all optical networks.     

Adiabatically tunable optical delay lines and their performance limitations

A simple tunable optical delay line based on adiabatic zone folding in coupled resonator lines is proposed, and its performance is analyzed. The results, valid for all adiabatically tunable optical buffers based on resonators, indicate that, while at low to medium bit rates the performance is improved substantially compared with that of the fixed delay lines, this improvement vanishes for high bit rates and large storage capacities.     

Opto-VLSI-based tunable photonic RF filter

In this paper, an Opto-Very-Large-Scale-Integrated (Opto-VLSI) based tunable photonic radio frequency (RF) filter structure is proposed and numerically simulated. The structure comprises a reconfigurable Opto-VLSI processor capable of arbitrarily steering optical beams of different wavelengths, a diffraction grating for wavelength division demultiplexing, and high-dispersion fibres for true-time delaying RF-modulated wavebands. The proposed structure has the ability to generate arbitrary wavebands and weights for realizing any RF filter responses. The proof-of-concept of the tunable photonic RF signal processor is also experimentally demonstrated by tuning its free-spectral range and altering its shape factor through optical beam steering.     

可调谐激光二极管吸收光谱系统信号分析及谱线畸变校正技术研究

利用可调谐激光二极管吸收光谱技术进行气体检测时,波长调制伴随的光强幅度调制,会使解调出的谐波谱线发生畸变.在傅里叶分析的基础上对可调谐激光二极管吸收光谱任意调制幅度的波长调制光谱信号进行了分析,给出了光强幅度调制引起吸收谱线畸变的理论解释.提出了在波长调制过程中进行旧步平抑幅度调制的方法来消除谱线畸变,设计了实验方案并...     

Design of a continuously tunable delay line using vectorial modulational instability and chromatic dispersion in optical fibers

We design an all-optical tunable delay line based on both dispersive and wavelength conversion stages involving modulational instability of a two-frequency pump field propagating in a highly birefringent fiber. More precisely, we numerically show that, by varying the frequency separation between the two orthogonally polarized pump waves, we achieve a controllable and continuous delay of hundreds of picoseconds for signal pulse durations from picoseconds to nanoseconds, without pulse distortion and with only small peak power fluctuations. The proposed method does not require any tunable bandpass filter and can be applied to delay digital data streams at tens of Gbit/s depending on the pump power level.     

Low distortion, continuously tunable, positive and negative time delays by slow and fast light using stimulated Brillouin scattering

We demonstrate a single optical timing module that can provide both tunable delay and advancement with low distortion using a reconfigurable gain medium based on stimulated Brillouin scattering. Dual-stage intensity modulation method is used to achieve optimized gain profiles for both slow- and fast-light operation. Using 6.5 ns Gaussian pulses, we demonstrate a continuous temporal adjustment from a fractional advancement of 0.31 to a fractional delay of 0.82, giving more than a full pulse width of total tunability.     

高双折射光纤环镜改善40 GHz光时钟消光比的研究

时钟信号的好坏在同步、解复用和光判决中起着决定性的作用,双折射光纤环镜具有灵活可调的滤波特性,光时钟信号通过双折射环形镜可以使其消光比得到改善,从而提高时钟信号的质量。为此提出了利用高双折射光纤环形镜提高光时钟信号消光比的方案,数值上模拟了环形镜透射谱随双折射器件偏振延时量(Δt)、偏振控制器快慢轴角度以及偏振控制器所引入光程差的变化而变化的情况,并理论分析了消光比不理想的时钟信号经过环形镜后的光谱形式。用法布里-珀罗滤波器提取的40 GHz时钟信号进行实验,时钟经过环形镜后消光比改善了13 dB,实验结果和理论模拟得到了很好的匹配。     

Tunable 2D time-wavelength optical CDMA encoder for differentiated service provisioning

We propose and demonstrate a reconfigurable tunable encoder for two-dimensional time-wavelength optical code division multiple access (OCDMA). This encoder is capable of creating 2D codes with variable code weight, enabling differentiated service provisioning. The demonstrated novel scheme uses ultra-fast optical delay lines and all-optical sampling while operating at 115 Gchip/s. Our proposed architecture provides an all-optical method of varying the code weight on a bit-per-bit basis, while maintaining the core architecture of a tunable OCDMA encoder.     

掺铒光纤中方波信号高次谐波的快慢光特性

光纤中方波信号的慢光技术在全光通信和光纤传感等领域具有重要的应用前景. 提出了谐波相对延时量的度量方法, 分别采用速率方程和相干布居振荡理论, 对掺铒光纤中方波信号的基波和高次谐波的快慢光特性进行了研究. 在无抽运光输入情况下, 改变入射光功率, 入射探测光的基波最大相对延时量能达到20%, 且存在实现最大相对延时量的入射光功率为8 mW; 在有抽运光输入的情况下, 改变信号光增益, 入射探测光的基波相对超前量同样能达到-20%, 且随着信号光增益的增大而增加. N次谐波(N=1, 3, 5, 7, …)在频率f/N(f为基波信号最大延时量对应的调制频率)处有最大相对延时量, 且它们的最大延时量相同, 频率处于相干布居振荡引起的光谱烧孔带宽内.     

The transmission performance degradation of the optical millimeter-wave signals by fiber chromatic dispersion

The influence of the fiber chromatic dispersion on double sideband (DSB), optical carrier suppression (OCS), and single sideband (SSB) optical mm-wave signals is investigated based on the Taylor expansion of the propagation constant and is verified by simulation. According to our theoretical results, the fading effect suppresses the signal power of the DSB optical mm-wave periodically in a cosine-like pattern, and it can be described by the zero-order Taylor expansion of the propagation constant. For the optical mm-wave with the signal modulated on two or more tones, the bit pulses of the mm-wave signal are distorted by the dispersion-inducing bit walk-off effect between tones, which is expressed by the first-order Taylor expansion of the propagation constant. Moreover, as the signal rate and the transmission distance are increased further, higher-order Taylor expansion of the propagation constant still degrades the optical mm-wave signal even if both the fading effect and the bit walk-off effect are eliminated completely. The distortion of the signal pulses of SSB optical mm-wave is derived based on the second-order Taylor expansion of the propagation constant. This degradation is verified by the simulation with the eye diagram evolution of the SSB optical mm-wave signal.