High temperature Raman spectroscopy studies of carbon nanowalls

High temperature Raman experiments were carried out on carbon nanowalls (CNWs). The intensity of the defect‐induced D mode decreased significantly after the sample was heated in air ambient. The Raman intensity ratio of D mode and G mode, I_D/I_G, changed from 2.3 at room temperature to 1.95 after the sample was heated to 600 °C. This change was attributed to the removal of surface amorphous carbon by oxidation. In contrast to I_D/I_G, the intensity ratio of the D′ mode and the G mode, I_D′/I_G, did not change much after heating, indicating that the surface amorphous carbon and surface impurity do not contribute as much to the intensity of the D′ mode. The dominant contributor to the D′ mode could be the intrinsic defects. Copyright © 2007 John Wiley & Sons, Ltd.     

Characterisation of carbonaceous materials using Raman spectroscopy: a comparison of carbon nanotube filters,single‐ and multi‐walled nanotubes,graphitised porous carbon and graphite

Multi‐walled carbon nanotube (MWCNT) filters have been recently synthesised which have specific molecular filtering capabilities and good mechanical strength. Optical and scanning electron microscopy (SEM) reveals the formation of highly aligned arrays of bundles of carbon nanotubes having lengths up to 500 µm. The Raman spectra of this material along with four other carbonaceous materials, commercially available single‐walled carbon nanotubes (SWCNTs) and MWCNTs, graphitised porous carbon (Carbotrap) and graphite have been recorded using two‐excitation wavelengths, 532 and 785 nm, and analysed for band positions and shape with special emphasis paid to the D‐, G‐ and G′‐bands. A major difference between the different MWCNT varieties analysed is that G‐bands in the MWCNT filters exhibit almost no dispersion, whereas the other MWCNTs show a noticeable dispersive behaviour with a change in the excitation wavelength. Spectral features similar to those of the MWCNT filter varieties were observed for the Carbotrap material. From the line shape analysis, the intensity ratio, I_D/I_G, of the more ordered MWCNT filter material using the integral G‐band turns out to be two times lower than that of the less ordered MWCNT filter product at both excitation wavelengths. This parameter can, therefore, be used as a measure of the degree of MWCNT alignment in filter varieties, which is well supported also by our SEM study. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman analysis of amorphous silicon ruthenium thin films embedded with nanocrystals

We report the Raman analysis of both as‐deposited and annealed amorphous silicon ruthenium thin films embedded with nanocrystals. In the Raman spectra of as‐deposited films, variations of TO peak indicate a short‐range disorder of a‐Si network with an increase of Ru concentration. The substitutional Ru atoms lower the concentration of Si―Si bonds and suppress the intensity of TO peak, but have less effect on TA, LA and LO peaks. In the Raman spectra of annealed films, characteristic parameters confirm the upgrade of a‐Si network at a low annealing temperature and the emergence of both ruthenium silicide and silicon nanocrystals at 700 °C. Although ruthenium silicide nanocrystals present no Raman peaks in the Raman spectra of as‐deposited samples, the non‐linear variations of intensity ratios I_{LA + LO}/I_TO and I_TA/I_TO still suggest their existence, and these nanocrystals are subsequently verified by high‐resolution transmission electron microscopy. Copyright © 2015 John Wiley & Sons, Ltd.     

Multipeak fitting analysis of Raman spectra on DLCH film

The hydrogenated diamond‐like carbon (DLCH) film with 1‐µm thickness is deposited by direct hydrocarbon gas ion beam method on silicon wafer and annealed at 400 °C. Detailed Raman spectra feature are fitted from nine sets of different peak fitting functions, including Gaussian, Lorentzian and Breit‐Wigner‐Fano (BWF) functions. These fitting results obtained from a two‐peak combination show some specific variances on the G peak position, FWHM_G and I_D/I_G ratio for as‐deposited and as‐annealed DLCH films. The most popular two‐peak fitting method with full Gaussian function tends to exhibit a higher ratio of the G peak position shift and higher I_D/I_G ratio than others fitting methods, the drastic difference among the most popular G (G) & G (D) and B (G) & L (D) schemes also have brought out in I_D/I_G ratio. However, for a more complex four‐peak Gaussian function fitting Raman spectra, the I_D/I_G ratio is close to that of a two‐peak fitting function with a mixture functions of BWF (G) and L (D). Furthermore, a series of systematic peak fitting procedures and comparisons of Raman spectra have been discussed in this study. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of Thermal Treatment on the Structure of Multi-walled Carbon Nanotubes

The effects of vacuum annealing and oxidation in air on the structure of multi-walled carbon nanotubes (MWCNTs) produced by a large-scale catalytic chemical vapor deposition (CCVD) process are studied using Raman spectroscopy and transmission electron microscopy (TEM). A detailed Raman spectroscopic study of as-produced nanotubes has also been conducted. While oxidation in air up to 400°C removes disordered carbon, defects in tube walls are produced at higher temperatures. TEM reveals that MWCNTs annealed at 1,800°C and above become more ordered than as-received tubes, while the tubes annealed at 2,000°C exhibit polygonalization, mass transfer and over growth. The change in structure is observable by the separation of the Raman G and D′ peaks, a lower R-value (I _D/I _G ratio), and an increase in the intensity of the second order peaks. Using wavelengths from the deep ultraviolet (UV) range (5.08 eV) extending into the visible near infrared (IR) (1.59 eV), the Raman spectra of MWCNTs reveal a dependence of the D-band position proportional to the excitation energy of the incident laser energies.     

Micro‐Raman investigation of tin dioxide nanostructured material based on annealing effect

Rutile‐structured nanocrystalline tin dioxide (SnO₂) powder was synthesized by the chemical precipitation method using the precursor SnCl₂• 5H₂O. The SnO₂ powder was annealed at different temperatures, namely, 600, 800 and 1000 °C. Micro‐Raman spectra were recorded for both the as‐grown and annealed SnO₂ nanocrystalline samples. Micro‐Raman spectral measurements on the SnO₂ nanoparticle show the first‐order Raman modes A_1g (633 cm⁻¹), E_1g (475 cm⁻¹) and B_2g (775 cm⁻¹), indicating that the grown SnO₂ belongs to the rutile structure. The first‐order A_1g mode is observed as an intense band, whereas the other two modes show low intensity. The full width at half‐maximum and band area of the Raman lines of SnO₂ nanoparticle annealed at various temperatures were calculated. The effect of high‐temperature annealing on the vibrational modes of SnO₂ was studied. The optical image of SnO₂ nanocrystalline material was used to understand the surface morphology effect. Copyright © 2011 John Wiley & Sons, Ltd.     

Disorder‐induced symmetry lowering in Ba(Y1/2Nb1/2)O3 ceramics probed by Raman spectroscopy

This work investigates the evolution of the crystal structure of microwave‐hydrothermal synthesized Ba(Y_1/2Nb_1/2)O₃ powders as a function of firing temperature by Raman spectroscopy. The samples were produced at 200 °C and fired at temperatures ranging from 600 to 1600 °C. Raman spectra were obtained at room temperature for all samples and the results showed that materials fired at 1600 °C exhibited tetragonal (I4/m or ) structure, whereas those fired at lower temperatures exhibited the triclinic (P1 or C_i¹) structure. The results were compared with those observed for ceramics obtained by conventional solid‐state methods. It is believed that the lowering of the symmetry verified in materials fired below 1600 °C is a consequence of the local disorder of Y⁺³ and Nb⁺⁵ ions in octahedral sites. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman identification of lonsdaleite in Popigai impactites

Micro‐Raman spectroscopy and X‐ray diffraction method (XRD) were used to characterize impact carbonaceous rocks excavated from the Popigai crater (Siberia). The deconvolution of the first‐order Raman spectra of the rocks containing different amounts of carbon phases (diamond, lonsdaleite and graphite) allowed the identification of lonsdaleite spectrum. The most intensive band at 1292–1303 cm⁻¹ was ascribed to A_1g vibration mode of lonsdaleite, whereas the less intense band at 1219–1244 cm⁻¹ was attributed, in agreement with previously reported ab initio calculations, to E_2g vibration mode. The established correlation between the intensities of Raman and XRD peaks permits a rough estimation of lonsdaleite/diamond phase ratio in the impact rocks using micro‐Raman measurements. The second‐order Raman spectra of lonsdaleite–diamond rocks were recorded. Copyright © 2014 John Wiley & Sons, Ltd.     

Using Raman spectroscopy as a tool for the detection of iron in glass

Raman spectroscopy has been used to identify iron‐containing glasses. This nondestructive technique offers a fast method to obtain qualitative information about the presence of iron oxides in glass. The effect of the iron content in glass samples is reflected on the topology of the Raman spectra: A strong link between the ratio of the Q₂/Q₃ vibration units of the silica tetrahedral structure is seen. If matrix effects are taken into account, also (semi)quantitative results can be obtained from the calibration lines. The linear calibration is based on the normalized band intensity at 980 cm⁻¹ (I₉₈₀/I₁₀₉₀) and the iron oxide concentration for similar glasses. In amber and dark colored glasses, an extra peak in the spectrum indicates the presence of a FeS chromophore. Different series of glasses of various origins (ancient and modern/industrial glass) have been considered. Copyright © 2011 John Wiley & Sons, Ltd.     

Temperature-induced transformations in hydrogenated and fluorinated single-wall carbon nanotubes studied by Raman scattering

Raman spectra of hydrogenated and fluorinated single-wall carbon nanotubes (SWCNTs) are measured at ambient temperature before and after heat treatment. The spectra of the as-prepared hydrogenated SWCNTs show a giant structureless band in the visible region that screens the Raman peaks related to the carbon atom vibrations. The onset of this strong band follows the excitation laser line, which is typical of hot luminescence. The intensity of the luminescence background decreases exponentially with the annealing time, while the dependence of the luminescence decay time constant on the annealing temperature is of the Arrhenius type with the activation energy E _a = 465 ± 44 meV. The luminescence background in the Raman spectra of the fluorinated SWCNTs is comparable with the Raman peak intensity and decreases exponentially with the annealing time. The dependence of the decay time constant on the temperature is again of the Arrhenius type with the activation energy E _a = 90 ± 8 meV. The appearance of hot luminescence is related to the upshift of the fundamental energy gap in functionalized SWCNTs and the structural disorder induced by random binding of hydrogen or fluorine atoms. The luminescence background disappears upon annealing in vacuum or in air after removal of hydrogen (fluorine), while the annealed samples still demonstrate large structural disorder.     

Study of Raman spectrum of uranium using a surface‐enhanced Raman scattering technique

Raman spectroscopic investigation on weak scatterers such as metals is a challenging scientific problem. Technologically important actinide metals such as uranium and plutonium have not been investigated using Raman spectroscopy possibly due to poor signal intensities. We report the first Raman spectrum of uranium metal using a surface‐enhanced Raman scattering‐like geometry where a thin gold overlayer is deposited on uranium. Raman spectra are detected from the pits and scratches on the sample and not from the smooth polished surface. The 514.5‐ and 785‐nm laser excitations resulted in the Raman spectra of uranium metal whereas 325‐nm excitation did not give rise to such spectra. Temperature dependence of the B_3g mode at 126 cm⁻¹ is also investigated. Copyright © 2011 John Wiley & Sons, Ltd.     

Near‐infrared Raman spectroscopy for gastric precancer diagnosis

Raman spectroscopy is a molecular vibrational spectroscopic technique that is capable of optically probing the biomolecular changes associated with neoplastic transformation. The purpose of this study was to apply near‐infrared (NIR) Raman spectroscopy for differentiating dysplasia from normal gastric mucosa tissue. A total of 65 gastric mucosa tissues (44 normal and 21 dysplasia) were obtained from 35 patients who underwent endoscopy investigation or gastrectomy operation for this study. A rapid NIR Raman system was utilized for tissue Raman spectroscopic measurements at 785‐nm laser excitation. High‐quality Raman spectra in the range of 800–1800 cm⁻¹ can be acquired from gastric mucosa tissue within 5 s. Raman spectra showed significant differences between normal and dysplastic tissue, particularly in the spectral ranges of 850–1150, 1200–1500 and 1600–1750 cm⁻¹, which contained signals related to proteins, nucleic acids and lipids. The diagnostic decision algorithm based on the combination of Raman peak intensity ratios of I₈₇₅/I₁₄₅₀ and I₁₂₀₈/I₁₆₅₅ and the logistic regression analysis yielded a diagnostic sensitivity of 90.5% and specificity of 90.9% for identification of gastric dysplasia tissue. This work demonstrates that NIR Raman spectroscopy in conjunction with intensity ratio algorithms has the potential for the noninvasive diagnosis and detection of precancer in the stomach at the molecular level. Copyright © 2009 John Wiley & Sons, Ltd.     

Changes in the vibrational modes of carbon nanotubes induced by electron‐beam irradiation: resonance Raman spectroscopy

Influence of electron‐beam (e‐beam) irradiation on multi‐walled (MW) and single‐walled (SW) carbon nanotube films grown by microwave chemical vapor deposition technique is investigated. These films were subjected to an e‐beam energy of 50 keV from a scanning electron microscope for 2.5, 5.5, 8.0, and 15 h, and to 100 and 200 keV from a transmission electron microscope for a few minutes to ∼2 h continuously. Such conditions resemble an increased temperature and pressure regime enabling a degree of structural fluidity. To assess structural modifications, they were analyzed prior to and after irradiation using resonance Raman spectroscopy (RRS) in addition to in situ monitoring by electron microscopy. The experiments showed that with extended exposures, both types of nanotubes displayed various local structural instabilities including pinching, graphitization/amorphization, and formation of an intramolecular junction (IMJ) within the area of electron beam focus possibly through amorphous carbon aggregates. RRS revealed that irradiation generated defects in the lattice as quantified through (1) variation of the intensity of radial breathing mode (RBM), (2) intensity ratio of D to G band (I_D/I_G), and (3) positions of the D and G bands and their harmonics (D* and G*) and combination bands (D + G). The increase in the defect‐induced D band intensity, quenching of RBM intensity, and only a slight increase in G band intensity are some of the implications. The MW nanotubes tend to reach a state of saturation for prolonged exposures, while the SW ones transform from a semiconducting to a quasi‐metallic character. Softening of the q = 0 selection rule is suggested as a possible reason to explain these results. Furthermore, these studies provide a contrasting comparison between MW and SW nanotubes. Copyright © 2006 John Wiley & Sons, Ltd.     

Raman fingerprint of the interaction of K+ with the COO− group of zwitterionic alanine

The interaction of K⁺ with the zwitterionic form of alanine (ZAla) is investigated using Raman spectroscopy and density functional theory calculations. The Raman spectra of an aqueous solution of Ala and its mixture with KOH at different molar concentrations [ZAla + xKOH, x = 1–5 M] have been recorded in the spectral region 400–1800 cm⁻¹. The wavenumber position of the band at ~529 cm⁻¹ shows a red shift of 14 cm⁻¹, while the Raman band at ~634 cm⁻¹ shows a blue shift of 10 cm⁻¹ with the increasing x from 1 to 5 M. The intensity ratio I₆₃₄/I₅₂₉ is increased with increasing x, and it could be because of the increase in concentration of the [ZAla + K⁺] complex in the solution. The new Raman band appeared at ~1079 cm⁻¹ in the Raman spectra of [ZAla + xKOH, x = 1–5] complex. To determine the most probable site for the interaction of K⁺ with ZAla, the structures of ZAla and the [ZAla + K⁺] were optimized at B3LYP/6‐311++G(d,p) level of theory. The electrostatic potential calculation carried out for ZAla reveals that the maximum density of electron is lying over COO⁻, and therefore, COO⁻ would be the most probable site for the interaction of K⁺ with ZAla. The theoretically calculated Raman spectra of ZAla, [ZAla + K⁺] and the [ZAla⁻ + K⁺] are in good agreement with experimentally observed Raman spectra. Thus, the Raman bands at ~529, 634, and 1079 cm⁻¹ may be used as the Raman fingerprint for the interaction of K⁺ with COO⁻ of the ZAla and ZAla⁻. Copyright © 2015 John Wiley & Sons, Ltd.     

退火对B掺杂纳米金刚石薄膜微结构和电化学性能的影响

采用热丝化学气相沉积法制备B掺杂纳米金刚石薄膜,并对薄膜进行真空退火处理,系统研究了不同退火温度对B掺杂纳米金刚石薄膜的微结构和电化学性能的影响.结果表明,当退火温度升高到800 ℃后,薄膜的Raman谱图中由未退火时在1157,1346,1470,1555 cm^-1处的4个峰转变为只有D峰和G峰,说明晶界上的氢大量解吸附量减少,并且D峰和G峰的积分强度比I_D/I_G值变为最小,即sp²相团簇     

Carbon nanostructures produced by pyrolysis under high pressure inside a nanosize silica matrix

In this work, the pyrolysis under high pressure of hydrocarbons dispersed inside a nanosized silica matrix (Aerosil) was investigated. The samples consisted of hydrophobic nanometric silica powder terminated by methyl groups with carbon contents ranging from 0.7 to 4 wt%. The pyrolysis was carried out in the temperature range from 1000 to 1600 °C under high pressure (1.25 up to 7.7 GPa) to keep the two‐dimensional distribution of carbon atoms originally at the silica grain boundaries. Evidences from Raman spectroscopy and transmission electron microscopy suggested that the resulting carbon nanostructures were actually graphene‐like nanoflakes. The size of the nanostructures calculated from the I_D/I_G ratio increased from 6 to 30 nm for processing temperatures increasing from 1000 to 1600 °C under pressure, respectively. The results revealed that the very good dispersion of the methyl groups inside the nanosize silica matrix, and the confinement under high pressure during the pyrolysis, played both a relevant role in the resulting carbon nanostructures. Copyright © 2012 John Wiley & Sons, Ltd.     

Raman spectroscopic characterization of novel carbon‐bonded filter compositions for steel melt filtration

In this work, Raman scattering results on novel carbon‐bonded filter compositions are presented. Such filters are already used for steel melt filtration; however, the potential of this carbon‐bonded Al₂O₃–C system regarding material characteristics and filtration efficiency has not been fully understood yet. In order to investigate thermally induced structural changes of the filter compositions, micro‐Raman spectroscopy was applied. Analyzing the position, intensity, and full width at half maximum of G and D peaks in the Raman spectra, it could be determined that the carbon appears in graphitic form and the graphitic cluster size was estimated. We found an increase of the lateral cluster size L_a with increasing coking temperature. Copyright © 2013 John Wiley & Sons, Ltd.     

Raman Spectroscopic Study of the Molybdate Mineral Szenicsite and Comparison with Other Paragenetically Related Molybdate Minerals

Abstract

The molybdate‐bearing mineral szenicsite, Cu₃(MoO₄)(OH)₄, has been studied by Raman and infrared spectroscopy. A comparison of the Raman spectra is made with those of the closely related molybdate‐bearing minerals, wulfenite, powellite, lindgrenite, and iriginite, which show common paragenesis. The Raman spectrum of szenicsite displays an intense, sharp band at 898 cm^?1, attributed to the ν₁ symmetric stretching vibration of the MoO₄ units. The position of this particular band may be compared with the values of 871 cm^?1 for wulfenite and scheelite and 879 cm^?1 for powellite. Two Raman bands are observed at 827 and 801 cm^?1 for szenicsite, which are assigned to the ν₃(E _g ) vibrational mode of the molybdate anion. The two MO₄ ν₂ modes are observed at 349 (B _g ) and 308 cm^?1 (A _g ). The Raman band at 408 cm^?1 for szenicsite is assigned to the ν₄(E _g ) band. The Raman spectra are assigned according to a factor group analysis and are related to the structure of the minerals. The various minerals mentioned have characteristically different Raman spectra.     

Infrared and Raman Spectra,conformations, ab initio calculations and spectral assignments of 1,3‐disilabutane (SiH3CH2SiH2CH3)

Raman spectra of 1,3‐disilabutane (SiH₃CH₂SiH₂CH₃) as a liquid were recorded at 293 K and as a solid at 78 K. In the Raman cryostat at 78 K an amorphous phase was first formed, giving a spectrum similar to that of the liquid. After annealing to 120 K, the sample crystallized and large changes occurred in the spectra since more than 20 bands present in the amorphous solid phase vanished. These spectral changes made it possible to assign Raman bands to the anti or gauche conformers with confidence. Additional Raman spectra were recorded of the liquid at 14 temperatures between 293 and 137 K. Some Raman bands changed their peak heights with temperature but were countered by changes in linewidths, and from three band pairs assigned to the anti and gauche conformers, the conformational enthalpy difference Δ_confH(gauche–anti) was found to be 0 ± 0.3 kJ mol⁻¹ in the liquid. Infrared spectra were obtained in the vapor and in the liquid phases at ambient temperature and in the solid phases at 78 K in the range 4000–400 cm⁻¹. The sample crystallized immediately when deposited on the CsI window at 78 K, and many bands present in the vapor and liquid disappeared. Additional infrared spectra in argon matrixes at 5 K were recorded before and after annealing to temperatures 20–34 K. Quantum chemical calculations were carried out at the HF, MP2 and B3LYP levels with a variety of basis sets. The HF and DFT calculations suggested the anti conformer as the more stable one by ca 1 kJ mol⁻¹, while the MP2 results favored gauche by up to 0.4 kJ mol⁻¹. The Complete Basis Set method CBS‐QB3 gave an energy difference of 0.1 kJ mol⁻¹, with anti as the more stable one. Scaled force fields from B3LYP/cc‐pVQZ calculations gave vibrational wavenumbers and band intensities for the two conformers. Copyright © 2007 John Wiley & Sons, Ltd.     

In vivo study on the protection of indole‐3‐carbinol (I3C) against the mouse acute alcoholic liver injury by micro‐Raman spectroscopy

Micro‐Raman spectroscopy (MRS) was utilized for the first time to evaluate the effect of indole‐3‐carbinol (I3C) on acute alcoholic liver injury in vivo. In situ Raman analysis of tissue sections provided distinct spectra that can be used to distinguish alcoholic liver injury as well as ethanol‐induced liver fibrosis from the normal state. Sixteen mice with liver diseases including acute liver injury and chronic liver fibrosis, and eight mice with normal liver tissues, and eight remedial mice were studied employing the Raman spectroscopic technique in conjunction with biomedical assays. The biochemical changes in mouse liver tissue when liver injury/fibrosis occurs such as the loss of reduced glutathione (GSH), and the increase of collagen (α‐helix protein) were observed by MRS. The intensity ratio of two Raman peaks (I₁₄₅₀/I₆₆₆) and in combination with statistical analysis of the entire Raman spectrum was found capable of classifying liver tissues with different pathological features. Raman spectroscopy therefore is an important candidate for a nondestructive in vivo screening of the effect of drug treatment on liver disease, which potentially decreases the time‐consuming clinical trials. Copyright © 2008 John Wiley & Sons, Ltd.