We have developed a ladder‐type dithienocyclopentathieno[3,2‐b]thiophene ( DTCTT ) hexacyclic unit in which the central thieno[3,2‐b]thiophene ring was covalently fastened to two adjacent thiophene rings through carbon bridges, thereby forming two connected cyclopentadithiophene ( CPDT ) units in a hexacyclic coplanar structure. This stannylated Sn‐DTCTT building block was copolymerized with three electron‐deficient acceptors, dibromo‐thieno[3,4‐c]pyrrole‐4,6‐dione ( TPD ), dibromo‐benzothiadiazole ( BT ), and dibromo‐phenanthrenequinoxaline ( PQX ), by Stille polymerization, thereby furnishing a new class of alternating donor–acceptor copolymers: PDTCTTTPD , PDTCTTBT , and PDTCTTPQX , respectively. Field‐effect transistors based on PDTCTTPQX and PDTCTTBT yielded high hole mobilities of 0.017 and 0.053 cm2 V?1 s?1, respectively, which are among the highest performances among amorphous donor–acceptor copolymers. A bulk heterojunction solar cell that incorporated PDTCTTTPD with the lower‐lying HOMO energy level delivered a higher Voc value of 0.72 V and a power conversion efficiency (PCE) value of 2.59 %. 相似文献
A solution‐processed anthradithiophene derivative, 5,11‐bis(4‐triethylsilylphenylethynyl)anthradithiophene (TESPE‐ADT), is studied for use as the semiconducting material in thin‐film transistors (TFTs). To enhance the electrical performance of the devices, two different kinds of solution processing (spin‐coating and drop‐casting) on various gate dielectrics as well as additional post‐treatment are employed on thin films of TESPE‐ADT, and p‐channel OTFT transport with hole mobilities as high as ~0.12 cm2 V?1 s?1 are achieved. The film morphologies and formed microstructures of the semiconductor films are characterized in terms of film processing conditions and are correlated with variations in device performance. 相似文献
Three new benzothieno[3,2‐b]thiophene ( BTT ; 1 ) derivatives, which were end‐functionalized with phenyl ( BTT‐P ; 2 ), benzothiophenyl ( BTT‐BT ; 3 ), and benzothieno[3,2‐b]thiophenyl groups ( BBTT ; 4 ; dimer of 1 ), were synthesized and characterized in organic thin‐film transistors (OTFTs). A new and improved synthetic method for BTT s was developed, which enabled the efficient realization of new BTT ‐based semiconductors. The crystal structure of BBTT was determined by single‐crystal X‐ray diffraction. Within this family, BBTT , which had the largest conjugation of the BTT derivatives in this study, exhibited the highest p‐channel characteristic, with a carrier mobility as high as 0.22 cm2 V?1 s?1 and a current on/off ratio of 1×107, as well as good ambient stability for bottom‐contact/bottom‐gate OTFT devices. The device characteristics were correlated with the film morphologies and microstructures of the corresponding compounds. 相似文献
Arsole‐containing conjugated polymers are a practically unexplored class of materials despite the high interest in their phosphole analogues. Herein we report the synthesis of the first dithieno[3,2‐b;2′,3′‐d]arsole derivative, and demonstrate that it is stable to ambient oxidation in its +3 oxidation state. A soluble copolymer is obtained by a palladium‐catalyzed Stille polymerization and demonstrated to be a p‐type semiconductor with promising hole mobility, which was evaluated by field‐effect transistor measurements. 相似文献
Here, a conjugated polymer VTTPD based on thieno[3,4‐c]pyrrole‐4,6‐dione (TPD) and dithiophene with vinyl as linker is synthesized and characterized. Electrochemical and optical studies indicate the LUMO and HOMO energies of the polymer are −3.70 and −5.39 eV. Theoretical calculation with density functional theory suggests that H‐bonds are formed between the TPD carbonyl (O) and its neighboring vinyl (H) which benefit the planarity and π‐conjugation of the polymer backbone. Bottom contact bottom gate organic field effect transistor devices based on VTTPD are fabricated and examined in air. After annealing at 160 °C, the devices exhibit excellent performance of μh = 0.4 cm2 V−1 s−1, Ion/off = 106, Vth within −10 V to −5 V. Thin film morphologies before and after the annealing process are also investigated with XRD and AFM.
Porphyrin‐based molecules have been widely used in dye‐sensitized solar cells and bulk heterojunction solar cells, but their application in field‐effect transistors (FETs) is limited. In this work, two conjugated polymers based on diketopyrrolopyrrole and porphyrin units were developed for FETs. The polymers exhibit extra‐low band gap with energy levels close to −4.0 eV and −5.0 eV due to the strong electron‐donating and withdrawing ability of porphyrin and diketopyrrolopyrrole. With additionally high crystalline properties, ambipolar charge carrier transports with a hole mobility of 0.1 cm2 V−1 s−1 in FETs were realized in these polymers, representing the highest performance in solution‐processed FETs based on porphyrin unit. 相似文献
Three copolymers that incorporate dithieno[3,2‐b:2′,3′‐d]pyrrole with fluorene, carbazole, or pyridine have been prepared by Suzuki reaction and characterized by NMR spectroscopy and GPC. A new homopolymer of dithieno[3,2‐b:2′,3′‐d]pyrrole was also synthesized for the comparison of their structure–property relationships. Their thermal, optical, and electrochemical properties have been investigated. All the polymers exhibit good thermal stability with decomposition temperatures around 400 °C. The fluorescence quantum efficiencies of all these polymers in solution are in the range of 33.5–55.5%. The copolymers also show high film fluorescence quantum efficiencies of about 20% while the fluorescence of the homopolymer film is almost quenched.
This review covers the synthesis and polymerization of benzo[1,2‐b: 4,5‐b′]dithiophene (BDT) to generate semiconducting polymers used in organic field‐effect transistors (OFET) and organic solar cells applications. 相似文献
The synthesis of a novel fused hexacyclic electron rich monomer incorporating thieno[3,2‐b]thiophene is reported and characterized by single crystal X‐ray diffraction. Suzuki co‐polymerization with benzothiadiazole (BT) afforded a novel low band‐gap polymer P4TBT with high molecular weights and good solution processability. Bulk heterojunction solar cell devices using the P4TBT and [70]PCBM gave power conversion efficiencies of 2.5%. Top‐gate, bottom‐contact field effect transistors (FETs) using P4TBT displayed high hole mobilities of 0.07 cm2 · Vs−1 demonstrating the suitability of the novel monomer and polymer for use in high performing organic electronic devices.
Non‐chlorinated solvents are highly preferable for organic electronic processing due to their environmentally friendly characteristics. Four different halogen‐free solvents, tetrafuran, toluene, meta‐xylene and 1,2,4‐trimethylbenzene, were selected to fabricate n‐channel organic thin film transistors (OTFTs) based on 3‐hexylundecyl substituted naphthalene diimides fused with (1,3‐dithiol‐2‐ylidene)malononitrile groups (NDI3HU‐DTYM2). The OTFTs based on NDI3HU‐DTYM2 showed electron mobility of up to 1.37 cm2·V?1·s?1 under ambient condition. This is among the highest device performance for n‐channel OTFTs processed from halogen‐free solvents. The different thin‐film morphologies, from featureless low crystalline morphology to well‐aligned nanofibres, have a great effect on the device performance. These results might shed some light on solvent selection and the resulting solution process for organic electronic devices. 相似文献
2,3‐Dimethylpentacene (DMP) and 2,3‐dimethyltetracene (DMT) were synthesized, characterized and employed as the channel material in the fabrication of thin‐film transistors. The two methyl groups increase the chemical stability of the compounds versus the pristine acene analogues. The crystals maintain herringbone‐like molecular packing, whereas the weak dipole associated with the unsymmetrical molecule induces an anti‐parallel alignment among the neighbors. This structural motif favors layered film growth on SiO2/Si surface. Thin film transistors prepared on SiO2/Si and n‐nonyltrichlorosilane‐modified SiO2/Si at different substrate temperatures were compared. DMP‐based transistors prepared on rubbed n‐nonyltrichlorosilane‐modified SiO2/Si substrate gave the highest field‐effect mobility of 0.46 cm2/Vs, whereas DMT‐based transistor gave a mobility of 0.028 cm2/Vs. 相似文献
An alternating narrow bandgap conjugated copolymer (PICZ‐DTBT, Eg= 1.83 eV) derived from 5,11‐di(9‐heptadecanyl)indolo[3,2‐b]carbazole and 4,7‐di(thieno[3,2‐b]thien‐2‐yl)‐2,1,3‐benzothiadiazole (DTBT), was prepared by the palladium‐catalyzed Suzuki coupling reaction. The resultant polymer absorbs light from 350–690 nm, exhibits two absorbance peaks at around 420 and 570 nm and has good solution processibility and thermal stability. The highest occupied molecular orbital (HOMO) energy level and lowest unoccupied molecular orbital (LUMO) level of the copolymer determined by cyclic voltammetry were about −5.18 and −3.35 eV, respectively. Prototype bulk heterojunction photovoltaic cells from solid‐state composite films based on PICZ‐DTBT and [6,6]‐phenyl‐C71 butyric acid methyl ester (PC71BM), show power conversion efficiencies up to 2.4% under 80 mW · cm−2 illumination (AM1.5) with an open‐circuit voltage of Voc = 0.75 V, a short current density of Jsc = 6.02 mA · cm−2, and a fill factor of 42%. This indicates that the copolymer PICZ‐DTBT is a viable electron donor material for polymeric solar cells.
Novel conjugated carbazole polymers based on the alkyne‐linked 1,8‐carbazole structure are synthesized in high yield by the Sonogashira cross‐coupling reaction and acetylenic oxidative coupling reaction. The polymers are thermally stable and highly soluble in common organic solvents such as CHCl3, CH2Cl2, and THF. As compared to ethynylene‐linked polymer, the butadiynylene‐linked polymer display a bathochromic shift in the absorption maximum and end absorption position. In addition, the fluorescence behaviors in CH2Cl2 are almost identical for both polymers. Electrochemical measurements indicate that the ethynylene‐linked polymer possesses a lower first oxidation potential than the butadiynylene‐linked one.