Phosphorus Ligands for Iron(III)‐Mediated Atom Transfer Radical Polymerization of Methyl Methacrylate

The iron(III)‐catalyzed atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was successfully employed using tributylphosphine (TBP) and trimethylphosphite (TMP) as ligands in the absence of a reducing agent. The effects of solvent and initiator on polymerization of MMA were investigated. Most of the polymerizations with these ligands were well controlled with a linear increase in the number average molecular weights ( ) versus conversion and relatively low molecular weight distribution ( = 1.2–1.4) throughout the reactions, and the measured weights matched with the predicted values. The ethyl 2‐bromoisobutyrate (EBriB) initiated ATRP of MMA with the FeBr₃/TBP or FeBr₃/TMP catalytic system was better controlled in toluene than in the other solvents used in this study at 80 °C.

     

Copolymers Containing Phosphorescent Iridium(III) Complexes Obtained by Free and Controlled Radical Polymerization Techniques

A methacrylate‐functionalized phosphorescent Ir(III)‐complex has been synthesized, characterized, and applied as a monomer in radical copolymerizations. Together with methyl methacrylate, the complex has been copolymerized under free radical polymerization conditions. Aiming for host‐guest‐systems, applicable e.g. in organic light emitting devices (OLEDs), the complex was further copolymerized with a methacrylate‐functionalized carbazole derivative using the atom transfer radical polymerization technique. Applying gel permeation chromatography, in combination with a photodiode array detector, could clearly prove the formation of the copolymers. The optical properties of the photoactive monomers as well as the copolymers were investigated by absorption and emission spectroscopy (in solution). For the carbazole‐copolymer, the emission originates almost exclusively from the complex. This provides evidence of an efficient intrachain energy transfer, which makes the system an interesting candidate for potential OLED applications.

     

Development of New Atom Transfer Radical Polymerization System by Iron (III)‐Metal Salts Without Using any External Initiator and Reducing Agent

Atom transfer radical polymerization (ATRP) catalyzed by high oxidation state metal salts of FeX₃ is developed for the first time in the absence of both external initiator and reducing agent. Methyl methacrylate (MMA) and styrene are polymerized successfully using FeX₃/Phosphorous ligands with well‐controlled molecular weight distributions (=1.5). The molecular weight of the polymers increases with monomer consumption with the progress of time and the polymerization behaviors show a decent ATRP trend. Activators and initiators are suggested to generate in situ by the addition reaction of MMA and one equivalent of FeX₃. The PMMA synthesized from without‐initiator system is characterized by ¹H, ¹³C and DEPT (distortionless enhancement by polarization transfer nuclear magnetic resonance) nuclear magnetic resonance spectroscopy. Chain extension and copolymerization experiments prove the livingness of the obtained polymer.

     

原子转移自由基聚合的最新研究进展*

原子转移自由基聚合(ATRP)是目前为止最具工业化应用前景的“活性”/可控自由基聚合之一。近年来对其广泛的研究使这一技术逐渐向着“提高可操作性”与“尽可能地减少金属催化剂用量”方面发展;与此同时,诞生了不同催化体系的ATRP衍生技术,如反向原子转移自由基聚合(RATRP)、正向反向同时引发的原子转移自由基聚合(SR&NI ATRP)、引发剂连续再生催化剂原子转移自由基聚合(ICAR ATRP)、电子转移生成催化剂的原子转移自由基聚合(AGET ATRP)和电子转移再生催化剂原子转移自由基聚合(ARGET ATRP)等多种基于ATRP的新方法。本文概述了这几种ATRP体系的发展历程与基本原理,并对其国内外的最新研究进展进行了综述。     

原子转移自由基聚合及可控自由基聚合

以作者在原子转移自由基聚合领域的研究成果为主导,结合国内外文献,对近年来出现的颇具影响的可控自由基聚合体系与进行了评述与展望。     

Integration of CuAAC Polymerization and Controlled Radical Polymerization into Electron Transfer Mediated “Click‐Radical” Concurrent Polymerization

The successful chain‐growth copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) polymerization employing Cu(0)/pentamethyldiethylenetriamine (PMDETA) and alkyl halide as catalyst is first investigated by a combination of nuclear magnetic resonance, gel‐permeation chromatography, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. In addition, the electron transfer mediated “click‐radical” concurrent polymerization utilizing Cu(0)/PMDETA as catalyst is successfully employed to generate well‐defined copolymers, where controlled CuAAC polymerization of clickable ester monomer is progressed in the main chain acting as the polymer backbone, the controlled radical polymerization (CRP) of acrylic monomer is carried out in the side chain. Furthermore, it is found that there is strong collaborative effect and compatibility between CRP and CuAAC polymerization to improve the controllability.

     

酚氧基联烯基醚单体的原子转移自由基聚合研究

以具有较高活性的酚氧基联烯基醚(POA)和对叔丁基酚氧基联烯基醚(t-BuPOA)为研究对象, 研究了不同引发 剂/配体体系对其原子转移自由基(ATRP)聚合行为的影响. 发现在2-溴代丙酸甲酯/溴化亚铜/4,4’-二庚基联吡啶(2-MBP/CuBr/dHbpy)和对甲苯磺酰氯/溴化亚铜/三-(N,N-二甲基氨基乙基)胺(p-TsCl/CuBr/Me6TREN)两种ATRP反应体系中, POA的聚合都遵循ATRP反应的机理.     

Compartmentalization in Atom Transfer Radical Polymerization (ATRP) in Dispersed Systems

Summary: Compartmentalization in atom transfer radical polymerization (ATRP) in dispersed systems at low conversion (<10%) has been investigated by means of a modified Smith–Ewart equation focusing on the system n‐butyl acrylate/CuBr/4,4′‐dinonyl‐2,2′‐dipyridyl at 110 °C. Compartmentalization of both propagating radicals and deactivator was accounted for in the simulations. As the particle diameter (d) decreases below 70 nm, the polymerization rate (R_p) at 10% conversion increases relative to the corresponding bulk system, goes through a maximum at 60 nm, and thereafter decreases dramatically as d decreases further. This behavior is caused by the separate effects of compartmentalization (segregation and confined space effects) on bimolecular termination and deactivation. The very low R_p for small particles (d < 30 nm) is due to the pseudo first‐order deactivation rate coefficient being proportional to d⁻³.

Simulated propagating radical concentration ([P•]) as a function of particle diameter (d) at 10% conversion for ATRP of n‐butyl acrylate ([nBA]₀ = 7.1 M , [PBr]₀ = [CuBr/dNbpy]₀ = 35.5 mM ) in a dispersed system at 110 °C. The dotted line indicates the simulated [P•] in bulk at 10% conversion.     

Atom Transfer Radical Polymerization of Styrene Using a Bifunctional Initiator

A bifunctional alkyl halide, namely l, 2-bis(2′-bromobutyryl) ethane (BBrBE), was synthesized and used to initiate the bulk atom transfer radical polymerization (ATRP) of styrene (St) at 110°C in the presence of CuBr/2,2′-bipyridyl. The narrow polydispersity of polystyrene (PSt) with precisely two arms could be synthesized. The initiate ability of the two active bromide functional groups at both sides of BBrBE for St and the propagation ability of the two arms were confirmed to be similar by the characterization of the individual arms obtained upon hydrolysis of the ester link between the core and the branches.     

Photoinduced Controlled Radical Polymerization

Well‐controlled radical polymerization of methyl methacrylate can be achieved by in situ photochemical generation of copper (I) complex from air‐stable copper (II) species without using any reducing agent at room temperature. The living character of this polymerization was confirmed by both the linear tendency of molecular weight evolution with conversion and a chain extension experiment.

     

Studying the Fundamentals of Radical Polymerization Using ESR in Combination with Controlled Radical Polymerization Methods

Electron spin resonance (ESR) spectroscopy can contribute to understanding both the kinetics and mechanism of radical polymerizations. A series of oligo/poly(meth)acrylates were prepared by atom transfer radical polymerization (ATRP) and purified to provide well defined radical precursors. Model radicals, with given chain lengths, were generated by reaction of the terminal halogens with an organotin compound and the radicals were observed by ESR spectroscopy. This combination of ESR with ATRPs ability to prepare well defined radical precursors provided significant new information on the properties of radicals in radical polymerizations. ESR spectra of the model radicals generated from tert-butyl methacrylate precursors, with various chain lengths, showed clear chain length dependent changes and a possibility of differentiating between the chain lengths of observed propagating radicals by ESR. The ESR spectrum of each dimeric, trimeric, tetrameric, and pentameric tert-butyl acrylate model radicals, observed at various temperatures, provided clear experimental evidence of a 1,5-hydrogen shift.     

利用反向原子转移自由基聚合反应合成聚甲基丙烯酸缩水甘油酯

以偶氮二异丁腈为引发剂,CuBr2/bpy为催化体系,甲基丙烯酸缩水甘油酯(GMA)通过反向原子转移自由基聚合反应合成了聚甲基丙烯酸缩水甘油酯(PGMA),其结构经1H NMR,IR和GPC确证。聚合反应符合活性自由基聚合特征,在聚合过程中GMA转化率和PGMA分子量随反应时间的延长而增大,分子量分布较窄。     

Sustainable Electrochemically‐Mediated Atom Transfer Radical Polymerization with Inexpensive Non‐Platinum Electrodes

Electrochemically‐mediated atom transfer radical polymerization (eATRP) of oligo(ethylene oxide) methyl ether methacrylate in water is investigated on glassy carbon, Au, Ti, Ni, NiCr and SS304. eATRPs are performed both in divided and undivided electrochemical cells operating under either potentiostatic or galvanostatic mode. The reaction is fast, reaching high conversions in ≈4 h, and yields polymers with dispersity <1.2 and molecular weights close to the theoretical values. Most importantly, eATRP in a highly simplified setup (undivided cell under galvanostatic mode) with inexpensive nonnoble metals, such as NiCr and SS304, as cathode is well‐controlled. Additionally, these electrodes neither release harmful ions in solution nor react directly with the C X chain end and can be reused several times. It is demonstrated that Pt can be replaced with cheaper, and more readily available materials without negatively affecting eATRP performance.

     

乳液原子转移自由基聚合*

原子转移自由基聚合(ATRP)应用于乳液聚合体系的主要挑战在于如何同时保证乳液的稳定性和聚合反应的可控性。本文主要对乳液ATRP体系中影响聚合反应可控性和乳液稳定性的各种因素、乳液ATRP的机理和乳液ATRP的应用等方面进行了综述。表面活性剂亲水亲油性及其亲水亲油基团的化学性质、催化剂/配体在油/水两相之间的分配行为、引发剂的溶解性、反应温度以及各组分的浓度是影响反应可控性和乳液稳定性的主要因素。各组分在油/水两相中的分配行为使得乳液ATRP的机理比传统乳液聚合更加复杂。乳液原子转移自由基聚合结合了活性自由基聚合和乳液聚合的优点,在理论研究和工业生产上具有很大的应用前景。     

Polymer Brushes via Controlled,Surface‐Initiated Atom Transfer Radical Polymerization (ATRP) from Graphene Oxide

A method for growing polymers directly from the surface of graphene oxide is demonstrated. The technique involves the covalent attachment of an initiator followed by the polymerization of styrene, methyl methacrylate, or butyl acrylate using atom transfer radical polymerization (ATRP). The resulting materials were characterized using a range of techniques and were found to significantly improve the solubility properties of graphene oxide. The surface‐grown polymers were saponified from the surface and also characterized. Based on these results, the ATRP reactions were determined to proceed in a controlled manner and were found to leave the structure of the graphene oxide largely intact.

     

Alkylboranes in Conventional and Controlled Radical Polymerization

Utilizations of alkylboranes reagents in radical polymerization are summarized in this minireview. Alkylboranes act as conventional radical initiators or radical chain-transfer agents in free-radical polymerization and controlled radical polymerization. This review discusses various polymerizations operating through different alkylborane reagents with their accompanying mechanisms. The aim of this minireview is to present the state of art of alkylboranes in radical polymerization and to provide the future aspects of this direction. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 14–19     

New Phenomena in Organometallic‐Mediated Radical Polymerization (OMRP) and Perspectives for Control of Less Active Monomers

The impact of reversible bond formation between a growing radical chain and a metal complex (organometallic‐mediated radical polymerization (OMRP) equilibrium) to generate an organometallic intermediate/dormant species is analyzed with emphasis on the interplay between this and other one‐electron processes involving the metal complex, which include halogen transfer in atom transfer radical polymerization (ATRP), hydrogen‐atom transfer in catalytic chain transfer (CCT), and catalytic radical termination (CRT). The challenges facing the controlled polymerization of “less active monomers” (LAMs) are outlined and, after reviewing the recent achievements of OMRP in this area, the perspectives of this technique are analyzed.     

First Nitroxide‐Mediated Controlled/Living Free Radical Polymerization in an Ionic Liquid

Summary: The controlled/living radical polymerizations of methyl acrylate in 50% v/v of an ionic liquid initiated by the alkoxyamine generated in situ from 4‐oxo‐2,2,6,6‐tetramethyl‐1‐piperidinyl‐N‐oxyl (4‐oxo‐TEMPO) and 2,2′‐azoisobutyronitrile (AIBN) at 140–155 °C are reported. The number‐average molecular weights increased linearly with conversion, and polydispersity indices are approximately 1.4 in the best case. The rates of polymerization were greater than in anisole, and similar to the rate of spontaneous polymerization in the ionic liquid.

(filled symbols) and (open symbols) vs. conversion for the MA polymerization in the presence of [4‐oxo‐TEMPO]/[AIBN] (2.8:1) in 50% v/v anisole with 0.03 M AIBN (squares) and 50% v/v [hmim][PF₆] with 0.03 M AIBN (circles), and 0.06 M AIBN (triangles).     

Simplified Electrochemically Mediated Atom Transfer Radical Polymerization using a Sacrificial Anode

Simplification of electrochemically mediated atom transfer radical polymerization was achieved efficiently under either potentiostatic or galvanostatic conditions using an aluminum wire sacrificial anode (seATRP) immersed directly into the reaction flask without separating the counter electrode. seATRP polymerizations were carried out under different applied potentials, E_apps=E_1/2, E_pc, E_pc ?40 mV, and E_pc ?80 mV. As the rate of polymerization (R_p) can be modulated by applying different E_app potentials, more reducing conditions resulted in faster R_p. The polymerization results showed similar narrow molecular‐weight distribution throughout the reactions, similar to results observed for n‐butyl acrylate (BA) polymerization under conventional eATRP. High‐molecular‐weight PBA and diblock copolymers were synthesized by seATRP with more than 90 % monomer conversion. Furthermore, galvanostatic conditions were developed for synthesizing PBA with the two‐electrode system.