ABg型缩聚形成的超支化聚合物的支化度与分子形态

用聚合反应动力学模型, 详细分析了AB_g型缩聚体系中各种结构单元的演变, 对超支化聚合物支化度的各种定义作了比较, 并对AB_g型反应体系的支化度提出了一个改进的定义, 使得支化度随g的增加而增加, 当g从2增加到无穷大, 最大支化度相应地从0.5增加到1－e^－1. 对均方回转半径的数值计算表明, 在确定的A基团转化率(x), z-均均方回转半径几乎与g无关, 当x＝0.999时, 随着g从2增加到无穷大, z-均回转半径只增加0.1%. 但是, 同样的条件下, z-均聚合度增加到2倍. 这一现象表明在任何指定的A转化率, AB_g型缩聚中形成的超支化聚合物的分子轮廓与g无关, 随着g 增大而在超支化聚合物中增加的结构单元(或聚合度)必定分布在分子内部.     

A Facile Method for Controlling the Molecular Weight of Hyperbranched Light‐Emitting Polymers

Summary: Two series of hyperbranched conjugated polymers were synthesized via an A₃ + B₂ type Wittig reaction. The molecular weights of the polymers were successfully tuned by simply changing the feed ratio of the monomers. Polymers with higher molecular weights presented more efficient photoluminescence, higher thermal stability and higher performance of LEDs.

     

Synthesis of Cyclic Selenenate/Seleninate Esters Stabilized by ortho‐Nitro Coordination: Their Glutathione Peroxidase‐Like Activities

The syntheses of selenenate/seleninate esters and related derivatives by aromatic nucleophilic substitution (S_NAr) reactions of 2‐bromo‐3‐nitrobenzylalcohol ( 13 ) and 2‐bromo‐3‐nitrobenzaldehyde ( 17 ) with Na₂Se₂/nBuSeNa are described. The reaction of 13 with Na₂Se₂ at room temperature afforded 7‐nitro‐1,2‐benzisoselenole(3 H) ( 15 ) instead of the desired diaryl diselenide 14 . Oxidation of selenenate ester 15 with hydrogen peroxide afforded the corresponding selenium(IV) derivative, 7‐nitro‐1,2‐benzisoselenole(3 H) selenium oxide ( 18 ). 2‐(Butylselanyl)‐3‐nitrobenzaldehyde ( 19 ) was synthesized by treating compound 17 with in situ generated nBuSeNa. The bromination reaction of selenide 19 did not afford the expected arylselenenyl bromide 20 , instead, it resulted in the formation of the unexpected 7‐nitro‐1,2‐benzisoselenol(3 H)‐3‐ol ( 21 ) and 3,3′‐oxybis(7‐nitro‐1,2‐benzisoselenole(3 H)) ( 22 ), respectively. The facile formation of heterocycles 21 and 22 is rationalized in terms of the aromatic ring strain in selenenyl bromide 20 . The presence of intramolecular secondary Se⋅⋅⋅O interactions in esters 15 , 18 , 21 , 22 , and selenenic anhydride 29 has been confirmed by single‐crystal X‐ray diffraction studies as well as computational studies. The presence of an intramolecular Se⋅⋅⋅O interaction in esters 4b , 8 , 15 , 18 , 21 , and 22 has been further proved by natural bond orbital (NBO) and atoms in molecules (AIM) calculations. Glutathione peroxidase‐like (GPx) antioxidant activities of 15 , 18 , 21 , 22 , and related heterocycles such as 7‐nitro‐1,2‐benzisoselenol(2 H)‐3‐one selenium oxide ( 4b ), 7‐nitro‐1,2‐benzisoselenol(2 H)‐3‐one ( 8 ), and 29 have been determined by the coupled reductase assay.     

Self‐Association and Degree of Branching: Fluorescence‐Probe Study of Hyperbranched Poly(sulfone‐amine)s in Aqueous Solution

Pyrene is used as a fluorescence probe to investigate the self‐association behavior of poly(sulfone‐amine)s with various degrees of branching (DB). The ratio of excimer to monomer emission intensity increases gradually with DB, passes through a critical point at a DB of about 35%, and then increases dramatically. The study reveals that the higher DB, the stronger the association.     

Comparison of Loading Efficiency between Hyperbranched Polymers and Cross‐Linked Nanogels at Various Branching Densities

The effect of branching point structures and densities is studied between azido‐containing hyperbranched polymers and cross‐linked nanogels on their loading efficiency of alkynyl‐containing dendron molecules. Hyperbranched polymers that contained “T”‐shaped branching linkage from which three chains radiated out and cross‐linked nanogels that contained “X”‐shaped branching linkage with four radiating chains are synthesized in microemulsion using either atom transfer radical polymerization (ATRP) or conventional radical polymerization (RP) technique. Both polymers have similar density of azido groups in the structure and exhibit similar hydrodynamic diameter in latexes before purification. Subsequent copper‐catalyzed azide–alkyne cycloaddition reactions between these polymers and alkynyl‐containing dendrons in various sizes (G1–G3) demonstrate an order of dendron loading efficiencies (i.e., final conversion of alkynyl‐containing dendron) as hyperbranched polymers > nanogels synthesized by ATRP > nanogels synthesized by RP. Decreasing the branching density or using smaller dendron molecules increases the click efficiency of both polymers. When G2 dendrons with a molecular weight of 627 Da are used to click with the hyperbranched polymers composed of 100% inimer, a maximum loading efficiency of G2 in the loaded hyperbranched polymer is 58% of G2 by weight. These results represent the first comparison between hyperbranched polymers and cross‐linked nanogels to explore the effect of branching structures on their loading efficiencies.

     

Anion Transport Using Core Functionalized Hyperbranched Polymers and Evidence of a Dense Packed Limit Based on Molecular Weight

Being able to bind, select, and transport species is central to a number of fields, including medicine, materials, and environmental science. In particular, recognizing a specific species from one phase and transporting it across, or into another phase, has obvious applications in environ-mental science, for example, removal of unwanted or toxic materials from an aqueous or organic phase. In this paper, we describe an approach that uses a functionalized dendritic polymer to bind and transport a small anionic molecule across an organic phase (and between two aqueous phases). The design was based on encapsulation principles borrowed from nature, where anions are bound and transported by proteins that have specific sites within their globular ordered structures. For the work reported here, a globular dendritic polymer functionalized with an isophthalamide-based receptor was used to replace the protein structure and anion-binding site. Along with control experiments, the binding and transport properties of two functionalized HBPs were assessed using a Pressman U tube experiment. Both HBPs demonstrated an enhanced ability to bind and transport anions (when compared to the anion-binding site used in isolation). Furthermore, optimum binding and transport occurred when the smaller of the two HBPs were used. This supports our previous observations regarding the existence of a dense packed limit for HBPs.     

Effect of Chain Straightening on Plateau Modulus and Entanglement Molecular Weight of Ni‐diimine Poly(1‐hexene)s

Summary: In this communication, we report the first rheological study on the chain‐straightened Ni‐diimine poly(1‐hexene)s and investigate the unique effect of chain straightening on plateau modulus and entanglement molecular weight of this series of polymers. Two Ni‐diimine poly(1‐hexene) samples having different levels of chain straightening were prepared with a chain‐walking Ni‐diimine catalyst, (ArNC(An) C(An)NAr)NiBr₂ (An = acenaphthene, Ar = 2,6‐(i‐Pr)₂C₆H₃) at two different temperatures. Rheological analyses show that the chain‐straightened polymers exhibit significantly enhanced plateau modulus and reduced entanglement molecular weight compared to regular poly(1‐hexene)s by metallocene catalysis. Such an effect becomes more pronounced with an increase in the level of chain straightening.

Loss moduli G″(ω) versus reduced angular frequency in a linear, natural logarithm plot for the three polymers at the reference temperature of 100 °C.     

Effect of Molecular Interactions on Electron‐Transfer and Antioxidant Activity of Bis(alkanol)selenides: A Radiation Chemical Study

Understanding electron‐transfer processes is crucial for developing organoselenium compounds as antioxidants and anti‐inflammatory agents. To find new redox‐active selenium antioxidants, we have investigated one‐electron‐transfer reactions between hydroxyl (^.OH) radical and three bis(alkanol)selenides (SeROH) of varying alkyl chain length, using nanosecond pulse radiolysis. ^.OH radical reacts with SeROH to form radical adduct, which is converted primarily into a dimer radical cation (>Se∴Se<)⁺ and α‐{bis(hydroxyl alkyl)}‐selenomethine radical along with a minor quantity of an intramolecularly stabilized radical cation. Some of these radicals have been subsequently converted to their corresponding selenoxide, and formaldehyde. Estimated yield of these products showed alkyl chain length dependency and correlated well with their antioxidant ability. Quantum chemical calculations suggested that compounds that formed more stable (>Se∴Se<)⁺, produced higher selenoxide and lower formaldehyde. Comparing these results with those for sulfur analogues confirmed for the first time the distinctive role of selenium in making such compounds better antioxidants.     

Strong activation of MgCl2‐supported Ziegler‐Natta catalysts by treatments with BCl3: Evidence and application of the “cluster” model of active sites

Heterogeneous Ziegler‐Natta precatalysts (with phthalate as internal donor) were modified by treatments with BCl₃ (2 h in heptane; T = 20–90 °C; B/Ti = 0.1–5) before their use in the polymerization of propylene to modify the active sites distribution. If performed on previously “detitanated” precatalysts, the treatment leads to a strong increase of productivity (up to one order of magnitude) without drastic modifications of polypropylenes properties (tacticity, molecular weight distribution). In addition, these findings are in good agreement with the hypothesis of a “cluster” organization of active sites allowing to rationalize activation by BCl₃ by formation of heteronuclear B‐Ti clusters. The activation method was also applied to unmodified precatalysts and gave a significant gain of productivity. The simple and versatile activation process can also be performed under mild conditions (low T and low [BCl₃]). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5784–5791, 2009     

Preparation and spectroscopic characterization of surface‐enriched (with active sites) polymer‐supported phase‐transfer catalysts and their efficiency in organic addition reactions: A kinetic study

We prepared two batches of surface‐enriched (with active sites) polymer‐supported phase‐transfer catalysts (SE‐PSPTC) by fixing the crosslinking monomer divinylbenzene (DVB) at 2% (first batch) and 6% (second batch) through a free‐radical suspension copolymerization method with vinylbenzyl chloride (VBC; 25%) as a functionality and with styrene (St) as a supporting monomer, followed by the quaternization of the resulting terpolymer beads with triethylamine. The enrichment of the active sites on the surfaces of the beads was accomplished by a surface‐grafting technique through the delayed addition of the functional monomer (VBC) to the partially polymerized copolymer beads of poly(St/DVB). To bring the active sites fully onto the surfaces, we prepared six different types of terpolymer beads in each batch by varying the partial polymerization time (PPT) of St/DVB—0 h [0 VBC (conventional)], 3 h (3 VBC), 6 h (6 VBC), 9 h (9 VBC), 12 h (12 VBC), and 15 h (15 VBC)—and then gradually adding the functional monomer (VBC) to the partially polymerized poly(St/DVB) system. The resulting terpolymer beads, containing different concentrations of pendant benzyl chloride (? CH₂Cl) on the surface in each batch, underwent facile quaternization [? CH₂N⁺(C₂H₅)₃Cl^?] with an increase in the PPT of St/DVB and remained constant at 12 VBC and 15 VBC. To asses the superiority of the catalysts according to the surface enrichment of the active sites, particularly between conventional (0 VBC) catalysts and other PPT‐based SE‐PSPTCs, we characterized all the catalysts by estimating the chloride‐ion concentration, by using Fourier transform infrared (FTIR), scanning electron microscopy (SEM), EDAX, and ESCA, and by carrying out the dichlorocarbene addition to olefins. The chloride‐ion concentration by the Volhard method and the peak intensity of the C? N stretching absorbance concentration, that is, the quaternary onium group in the FTIR spectra of both batches, increased with the PPT of St/DVB in both batches of catalysts. In particular, the chloride concentration of a first‐batch catalyst of a representative mesh size (?120 + 140) had a twofold enhancement between the conventional catalyst (0 VBC; 1.88 m equiv g^?1) and 9 VBC/SE‐PSPTC (3.74 m equiv g^?1), although the same amount of the functional monomer was added in both preparations. These results showed the higher enrichment of the active site on the surface of 9 VBC, and the same trend was also maintained for second‐batch catalysts, regardless of the catalyst mesh size. SEM images of both batches showed that there was a higher concentration of nodules [due to the grafting of poly(VBC)] on the surfaces of the beads of 9 VBC/SE‐PSPTC and the aforementioned PPT catalysts than on the surfaces of the conventional catalysts (0 VBCs), which exhibited smooth surfaces (because of the simultaneous addition of all three monomers). This observation confirmed the enrichment of active sites on the surfaces. In the EDAX analysis, up to a depth of 0.5–1 μm, the surface chloride concentration increased from 0 VBC to 9 VBC/SE‐PSPTC and remained constant in 12 VBC and 15 VBC, first‐batch catalysts of a representative mesh size (?120 + 140). The same trend was also observed in second‐batch catalysts, indicating the enrichment of the onium group more on the surface in 9 VBC/SE‐PSPTCs. The ESCA analysis, to a depth of about 20–30Å, proved that the concentration of covalent chloride on the surface had increased from 0 VBC (15%) to 9 VBC/SE‐PSPTCs (29%) and remained constant thereafter in first‐batch catalyst; the trend was the same for second‐batch catalysts, also confirming the strong evidence of surface enrichment of the active sites. Similarly, the rate constants of different olefin addition reactions catalyzed by both batches of catalysts also increased from 0 VBC to 9 VBC and remained constant with 12 VBC and 15 VBC catalysts. The twofold increase of the rate constants, regardless of the olefins, for conventional catalysts to 9 VBC/SE‐PSPTCs confirmed the enrichment of the active sites on the surfaces. All these experimental observations proved that 50% of the active sites were successfully brought out from inside the poly(St/DVB) networks to the exterior surfaces, although same amount of VBC was added for the preparation of all the catalyst types. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 347–364, 2003     

Polyplex Particles Based on Comb‐Like Polyethylenimine/Poly(2‐ethyl‐2‐oxazoline) Copolymers: Relating Biological Performance with Morphology and Structure

The present contribution is focused on feasibility of using comb‐like copolymers of polyethylenimine with poly(2‐ethyl‐2‐oxazoline) (LPEI‐comb‐PEtOx) with varying grafting densities and degrees of polymerization of PEI and PEtOx to deliver DNA molecules into cells. The copolymers form small and well‐defined particles at elevated temperatures, which are used as platforms for binding and condensing DNA. The electrostatic interactions between particles and DNA result in formation of sub‐100 nm polyplex particles of narrow size distribution and different morphology and structure. The investigated gene delivery systems exhibit transfection efficiency dependent on the copolymer chain topology, shape of the polyplex particles, and internalization pathway. Flow cytometry shows enhanced transfection efficiency of the polyplexes with elongated and ellipsoidal morphology. The preliminary biocompatibility study on a panel of human cell lines shows that pure copolymers and polyplexes thereof are practically devoid of cytotoxicity.     

Polypropylene and poly(ethylene‐co‐1‐octene) effective synthesis with diamine‐bis(phenolate) complexes: Effect of complex structure on catalyst activity and product microstructure

A series of group 4 metal complexes bearing amine‐bis(phenolate) ligands with the amino side‐arm donor: (μ‐O)[Me₂N(CH₂)₂N(CH₂‐2‐O‐3,5‐tBu₂‐C₆H₂)₂ZrCl]₂ ( 1a ), R₂N(CH₂)₂N(CH₂‐2‐O‐3‐R¹‐5‐R²‐C₆H₂)₂TiCl₂ (R = Me, R¹, R² = tBu ( 2a ), R = iPr, R¹, R² = tBu ( 2b ), R = iPr, R¹ = tBu, R² = OMe ( 2c )), and Me₂N(CH₂)₂N(CH₂‐2‐O‐3,5‐tBu₂‐C₆H₂)(CH₂‐2‐O‐C₆H₄)TiCl₂ ( 2d ) are used in ethylene and propylene homopolymerization, and ethylene/1‐octene copolymerization. All complexes, upon their activation with Al(iBu)₃/Ph₃CB(C₆F₅)₄, exhibit reasonable catalytic activity for ethylene homo‐ and copolymerization giving linear polyethylene with high to ultra‐high molecular weight (600·× 10³–3600·× 10³ g/mol). The activity of 1a /Al(iBu)₃/Ph₃CB(C₆F₅)₄ shows a positive comonomer effect, leading to over 400% increase of the polymer yield, while the addition of 1‐octene causes a slight reduction of the activity of the complexes 2a‐2d . The complexes with the NMe₂ donor group ( 2a , 2d , 1a ) display a high ability to incorporate a comonomer (up to 9–22 mol%), and the use of a bulkier donor group, N(iPr)₂ ( 2b , 2c ), results in a lower 1‐octene incorporation. All the produced copolymers reveal a broad chemical composition distribution. In addition, the investigated complexes polymerized propylene with the moderate ( 1a , 2a ) to low ( 2b‐2d ) activity, giving polymers with different microstructures, from purely atactic to isotactically enriched (mmmm = 28%). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2467–2476     

Effect of the Molecular Weights of Poly‐L‐Arginine on Membrane Strength and Permeability of Poly‐L‐Arginine Group Microcapsules

A novel poly‐L ‐arginine group microcapsule was produced to investigate its nutritional function and pharmacological efficacy. The molecular weight of poly‐L ‐arginine is an important parameter for its membrane strength, but does not obviously affect its release property. Thus, poly‐L ‐arginine can be used as a kind of new membrane material in microcapsules, and it is expected to be used as an therapeutic and biodegradable drug carrier.

Influence of the molecular weight of poly‐L ‐arginine on membrane thickness.     

Effect of PEO‐PPO‐PEO copolymer on the mechanical and thermal properties and morphological behavior of biodegradable poly (L‐lactic acid) (PLLA) and poly (butylene succinate‐co‐L‐lactate) (PBSL) blends

A blend of two biodegradable and semi‐crystalline polymers, poly (L‐lactic acid) (PLLA; 70 wt%) and poly (butylene succinate‐co‐L‐lactate) (PBSL; 30 wt%), was prepared in the presence of various polyethylene oxide‐polypropylene oxide‐polyethylene oxide (PEO‐PPO‐PEO) triblock copolymer contents (0.5, 1, 2 wt%). Mechanical, thermal properties, and Fourier transform infrared (FTIR) analysis of the blends were investigated. It was found that the addition of copolymer to PLLA/PBSL improved the fracture toughness of the blends as shown by mode I fracture energies. It was supported by morphological analysis where the brittle deformation behavior of PLLA changed to ductile deformation with the presence of elongated fibril structure in the blend with copolymer system. The glass transition temperature (T_g), melting temperature (T_m) of PLLA, and PBSL shift‐closed together indicated that some compatibility exists in the blends. In short, PEO‐PPO‐PEO could be used as compatibilizer to improve the toughness and compatibility of the PLLA/PBSL blends. Copyright © 2010 John Wiley & Sons, Ltd.     

Analysis of Ethylene/1‐Olefin Copolymers Made with Ziegler–Natta Catalysts by Deconvolution of Molecular Weight and Average Short Chain Branching Distributions

In this article a systematic method is proposed to deconvolute the time‐dependent molecular weight distributions (MWD) and average comonomer fraction profiles of ethylene/1‐olefin copolymers made with heterogeneous Ziegler–Natta catalysts. These distributions with a high‐temperature gel permeation chromatography equipped with an infrared detector at four different polymerization times have been measured and used this information to infer how the fractions of polymer made on each site type varied with polymerization time. The model estimates here the minimum number of active site types needed to describe these copolymers, the MWD of polymer populations made on each site type, and their average comonomer fractions. This method is useful to quantify the microstructure of olefin copolymers made with multiple site type catalysts using the least number of adjustable parameters.

     

Effect of Electrolytes and Polymers on the Thixotropy of Mg‐Al‐Layered Double Hydroxides/Kaolinite Dispersions

The effect of electrolytes (NaCl and CaCl₂) and polymers (CPAM and HPAM) on the thixotropy of Mg‐Al‐layered double hydroxide (LDHs)/kaolinite dispersions has been investigated. It was observed that the type of thixotropy in LDH/kaolinite dispersions may be affected by NaCl, but not by CaCl₂ in range of concentration of interest. The type of thixotropy in LDH/kaolinite dispersion with R=0 transformed from positive thixotropy to complex thixotropy and at last positive thixotropy again with the concentration of NaCl in range of 0.00–0.10 mol·L⁻¹; the type of thixotropy in LDHs/kaolinite dispersions with R=0.25 transformed from complex thixotropy to positive thixotropy and then complex thixotropy again with the concentration of NaCl in range of 0.00–0.10 mol·L⁻¹. The type of thixotropy in LDH/kaolinite dispersion with R=0 may be not affected by cationic polyacrylamide (CPAM) and hydrolyzed polyacrylamide (HPAM); but the LDHs/kaolinite dispersions with R=0.25 transformed from complex thixotropy to positive thixotropy with the both polymers concentration in range of interest, which indicated that the microstructure of the dispersion changed from weak folc sediments structure to steric network structure.     

Effect of the comonomer content on the mechanical parameters and microhardness values in poly(ethylene‐co‐1‐octadecene) synthesized by a metallocene catalyst

Stress–strain and microhardness measurements were carried out on a series of copolymers of ethylene and 1‐octadecene with different comonomer contents in the corresponding homopolymer of ethylene, synthesized with a metallocene catalyst. The different mechanical properties, deduced from the stress–strain curves (Young's modulus, yield stress, deformation at break, and energy to break) are interpreted in terms of the crystallinity and molecular weight of the samples because these two characteristics show considerable variations with the comonomer content. The microhardness values are explained in terms of these properties, and they are also correlated with Young's moduli and yield stresses deduced from the stress–strain curves. Linear relations are found between microhardness and yield stress and between the logarithm of the microhardness and the logarithm of the elastic modulus. The properties deduced from these lines are compared with literature values. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 277–285, 2001     

Radical Thiol‐yne Chemistry on Diphenylacetylene: Selective and Quantitative Addition Enabling the Synthesis of Hyperbranched Poly(vinyl sulfide)s

A powerful variation of traditional radical thiol‐yne reaction with diphenylacetylene (DPA)‐based starting materials leading to the quantitative and selective formation of the corresponding vinyl sulfides is reported. A variety of different thiols are shown to undergo reaction with DPA and the influence of their structure on reactivity is studied. The results obtained from the model reactions are then used to guide the efficient synthesis of hyperbranched poly(vinyl sulfide) (hb‐PVS) systems by employing a dithiol and a trialkyne in an A₂ + B₃ approach. The polymers obtained show excellent solubility in common organic solvents and exhibit high refractive indices (e.g., 1.70 at 589 nm). The combined ease of processability and potential for cross‐linking make these materials very interesting for applications, such as coatings for optical devices. The selective mono‐addition thiol‐yne reaction on DPA serves not only as a synthetic method for the preparation of PVS but could also be applied to the general modification of acetylene‐containing materials.