Diode-laser measurements of O2, N2 and air-pressure broadening and shifting of NH3 in the 10 μm spectral region

Using a tunable diode-laser spectrometer, we have measured the O₂, N₂, air-shift and broadening coefficients for 5 lines of ammonia in the R branch of the ν₂ band. These lines are located in the spectral range 1030-1070 cm⁻¹. The pressure shift and broadening are obtained by fitting the measured shapes of these lines by a Voigt profile. The broadening parameters and shift coefficients are compared to the results of theoretical calculations based on the semiclassical Robert-Bonamy formalism (RB) in which the intermolecular potential includes electrostatic, induction, and dispersion energy contributions. The variation of these coefficients with rotational and vibrational quantum numbers is examined. The results are generally in satisfactory agreement with experimental data.     

Theoretical and experimental analysis of N2–H2 stimulated Raman spectra

The paper reports on a detailed study of the N₂–H₂ collisional line broadening coefficient. High resolution stimulated Raman spectra of nitrogen–hydrogen mixtures have been recorded at liquid nitrogen and room temperatures. Corresponding linewidth calculations have been performed at temperatures between 77 and 500?K using the semiclassical Robert and Bonamy model for J rotational quantum numbers varying between 0 and 11. Comparison between experimental data and calculated results shows good agreement at room temperature using an adjusted value for the kinetic diameter.     

Quantum virial coefficients of molecular nitrogen

We report virial coefficients up to third order in density for molecular nitrogen, investigating 103 temperatures in the range (15 K, 3000 K). All calculations are based on an ab initio-based potential taken from the literature. Path-integral Monte Carlo (PIMC) is applied to account for nuclear quantum effects, and these results are compared to a more approximate but faster semiclassical treatment. Additionally, we examine a PIMC approach that employs semiclassical beads for the path-integral images, but find that it offers marginal advantage. A recently developed orientation sampling algorithm is used in conjunction with Mayer sampling to compute precise virial coefficients. We find that, within the precision of our calculations of the second-order coefficient (B₂), semiclassical methods are adequate for temperatures greater than 250 K, and are needed to correct classical behaviour for temperatures as high as 800 K. For the third-order coefficient (B₃), the semiclassical methods are adequate above 150 K, and are required up to the highest temperature examined (3000 K) in order to correct the classical treatment within the precision of the calculations. However, three-body contributions to the potential are much more significant than nuclear quantum effects for the evaluation of B₃.     

Measurement and calculation of the Q‐branch spectrum of nitrogen using inverse Raman spectroscopy and cw Raman‐induced polarization spectroscopy

The techniques of inverse Raman spectroscopy, Raman‐induced polarization spectroscopy (RIPS), and optical heterodyne RIPS (OHD‐RIPS) are compared by probing the Q‐branch of the nitrogen molecule. The signal is measured employing either a photomultiplier tube (low background level–RIPS) or a photodetector (high background level–IRS and OHD‐RIPS). The measurements are performed using atmospheric mixtures of N₂ Ar with concentrations varying from 0 to 79% N₂. This strategy permits estimation of detection limits using the different techniques. Pump and probe energy levels are varied independently to study signal dependence on laser irradiance. A theoretical treatment is presented on the basis of the Raman susceptibility equations, which permits the calculation of spectra for all three techniques. Calculated Q‐branch spectra are compared with the measured spectra for the interactions of a linearly polarized probe beam with a linearly or circularly polarized pump beam. The polarizer angle in the detection path for OHD‐RIPS has a dramatic effect on the shape of the spectrum. The calculated and experimental OHD‐RIPS spectra are in good agreement over the entire range of investigated polarizer angles. Detection limits using these techniques are analyzed to suggest their applicability for measuring other species of importance in combustion and plasma systems. Copyright © 2007 John Wiley & Sons, Ltd.     

CARS investigation of collisional shift of the hydrogen Q‐branch transitions by water at high temperatures

A high‐resolution (∼0.1 cm⁻¹) spectroscopic method based on the application of a Fabry–Pérot interferometer to the spectral analysis of the coherent anti‐Stokes Raman scattering (CARS) signal from an individual Raman transition was used to obtain single‐shot spectra of hydrogen Q‐branch transitions directly in the flame of a pulsed, high‐pressure H₂/O₂ combustion chamber. Simultaneously with the Fabry–Pérot pattern, a broadband CARS spectrum of the complete H₂Q ‐branch structure was recorded in order to measure the temperature of the probe volume. During every cycle of the combustion chamber, a pressure pulse together with single‐shot CARS spectra, providing information on individual line shapes and medium temperature, was recorded. On the basis of the experimental data, the temperature dependences of lineshift coefficients for several Q‐branch lines of hydrogen molecules under collisions with water molecules were determined in the temperature range 2100 < T < 3500 K, and an empirical ‘fitting law’ for H₂ H₂O lineshift coefficients is proposed. Copyright © 2010 John Wiley & Sons, Ltd.     

Infrared and Raman Spectra,conformations, ab initio calculations and spectral assignments of 1,3‐disilabutane (SiH3CH2SiH2CH3)

Raman spectra of 1,3‐disilabutane (SiH₃CH₂SiH₂CH₃) as a liquid were recorded at 293 K and as a solid at 78 K. In the Raman cryostat at 78 K an amorphous phase was first formed, giving a spectrum similar to that of the liquid. After annealing to 120 K, the sample crystallized and large changes occurred in the spectra since more than 20 bands present in the amorphous solid phase vanished. These spectral changes made it possible to assign Raman bands to the anti or gauche conformers with confidence. Additional Raman spectra were recorded of the liquid at 14 temperatures between 293 and 137 K. Some Raman bands changed their peak heights with temperature but were countered by changes in linewidths, and from three band pairs assigned to the anti and gauche conformers, the conformational enthalpy difference Δ_confH(gauche–anti) was found to be 0 ± 0.3 kJ mol⁻¹ in the liquid. Infrared spectra were obtained in the vapor and in the liquid phases at ambient temperature and in the solid phases at 78 K in the range 4000–400 cm⁻¹. The sample crystallized immediately when deposited on the CsI window at 78 K, and many bands present in the vapor and liquid disappeared. Additional infrared spectra in argon matrixes at 5 K were recorded before and after annealing to temperatures 20–34 K. Quantum chemical calculations were carried out at the HF, MP2 and B3LYP levels with a variety of basis sets. The HF and DFT calculations suggested the anti conformer as the more stable one by ca 1 kJ mol⁻¹, while the MP2 results favored gauche by up to 0.4 kJ mol⁻¹. The Complete Basis Set method CBS‐QB3 gave an energy difference of 0.1 kJ mol⁻¹, with anti as the more stable one. Scaled force fields from B3LYP/cc‐pVQZ calculations gave vibrational wavenumbers and band intensities for the two conformers. Copyright © 2007 John Wiley & Sons, Ltd.     

Vibrational spectroscopy and DFT calculations of N,N′‐dicyclohexylcarbodiimide

Infrared (IR) and Raman spectra were obtained for N,N′‐dicyclohexylcarbodiimide (DCC) in the solid state and in CHCl₃ solution. Structures and vibrational spectra of isolated, gas‐phase DCC molecules with C₂ and C_i symmetries, computed at the B3‐LYP/cc‐pVTZ level, show that the IR and Raman spectra provide convincing evidence for a C₂ structure in both the solid state and in CHCl₃ solution. Using a scaled quantum‐chemical force field, these density functional theory calculations have provided detailed assignments of the observed IR and Raman bands in terms of potential energy distributions. Comparison of solid‐state and solution spectra, together with a Raman study of the melting behaviour of DCC, revealed that no solid‐state effects were evident in the spectra. Copyright © 2010 John Wiley & Sons, Ltd.     

Calculation and analytical representation of self-pressure and air pressure broadening coefficients of ozone spectral lines

The coefficients γ of broadening by self-pressure, and pressure of nitrogen, oxygen, and air are calculated for absorption lines of the rotational band and for the ν₂ band of the ozone molecule for temperatures 296, 252, and 212 K. The calculations are performed by the semiclassical method using rectilinear and exact trajectories for interacting molecules. It is shown that the experimental data obtained for the two bands at T = 296 K can be reconstructed better using different isotropic intermolecular interaction potentials. The experimental and calculated broadening coefficients of ozone absorption lines for the rotational band and for the ν₂ and ν₁ + ν₃ vibrational bands were used to determine the parameters of an analytical model, which permits one to calculate γ in a wide range of rotational quantum numbers, 0 ≤ J ≤ 45, 0 ≤ K _a ≤ 20, and temperatures of 200–296 K.     

Synthesis and structural study of 2′‐ and 2′,6′‐positioned methyl‐ and nitro‐substituted 3‐(arylhydrazono)pentane‐2,4‐diones

A systematic series of ortho‐methyl‐ and nitro‐substituted arylhydrazones 2–6 formed by Japp–Klingemann reaction between pentane‐2,4‐dione and the respective aryldiazonium salts have been synthesized and studied by X‐ray crystal structure analysis, with added quantum chemical calculations. The optimized molecular geometries based on DFT calculations, enabling determination of relevant rotational barriers, and the calculated bond and ring critical points, using the method of ‘atoms in molecules’, were found to correspond with the experimental data, involving specific molecular conformations and hydrogen‐bonded ring structure dependent on the ortho‐substitution, thus making possible reliable structural prediction of this compound class. Copyright © 2007 John Wiley & Sons, Ltd.     

On the accuracy of classical, semiclassical and quantum methods in collision line broadening calculations: Comparative analysis for C2H2-Ar, He systems

Accuracies of classical, semiclassical and quantum methods are comprehensively examined in calculations of impact line widths of C₂H₂ molecules perturbed by Ar and He. The field of comparative study covers both infrared absorption and Raman scattering lines of acetylene having rotational quantum number J=0-30 at temperatures 173 and 296 K. Calculations have been made by fully classical method and by three basic least approximate semiclassical methods, namely, Neilsen-Gordon (NG) method, peaking approximation (PA) and Smith-Giraud-Cooper (SGC) method. Most accurate ab initio potential energy surfaces (PES) of Yang et al. (1996) [21] and Mozsynski et al. (1995) [22] have been applied to model C₂H₂-Ar and C₂H₂-He interactions. The comparison has been made also with available experimental data and with the results of rigorous fully quantum-mechanical calculations within close coupling and coupled states approaches in identical conditions. Semiclassical methods are proved to be not so much accurate as it is generally believed since all they gave in the cases considered seriously underestimated results. The fundamental issue of the adequacy of simplified trajectories in collision broadening calculations is finally reasonably solved. In cases of C₂H₂-Ar and C₂H₂-He systems the use of the “exact” isotropic trajectories (i.e. driven only by the isotropic part of PES) is the main reason of failing of NG, PA and SGC methods. Thus the neglecting of back-influence of the RT exchange on the classical path is a principal defect of semiclassical methods. Finally, the application of simplified trajectories is recognized as inadequate and risky in broadening calculations for molecules having relatively small rotational constants when accurate ab initio PES are applied.     

Analytical representation for water vapor self-broadening coefficients

Analytical models are proposed for the water vapor self-broadening coefficients γ, which depend on the fitting parameters and the temperature. The model parameters are determined for the rotational transitions of the ground vibrational state and the band ν₂. The calculated values of γ are compared systematically with the experimental findings and with the results of calculation by semiclassical methods. The models proposed reconstruct quite satisfactorily the experimental values of γ known for different temperatures and can be used to tabulate γ for the bands under study in a wide range of temperatures and rotational quantum numbers.     

Conformational analysis of 3,3‐dimethyl‐3‐silathiane, 2,3,3‐trimethyl‐3‐silathiane and 2‐trimethylsilyl‐3,3‐dimethyl‐3‐silathiane—preferred conformers,barriers to ring inversion and substituent effects

The first conformational analysis of 3‐silathiane and its C‐substituted derivatives, namely, 3,3‐dimethyl‐3‐silathiane 1 , 2,3,3‐trimethyl‐3‐silathiane 2 , and 2‐trimethylsilyl‐3,3‐dimethyl‐3‐silathiane 3 was performed by using dynamic NMR spectroscopy and B3LYP/6‐311G(d,p) quantum chemical calculations. From coalescence temperatures, ring inversion barriers ΔG^≠ for 1 and 2 were estimated to be 6.3 and 6.8 kcal/mol, respectively. These values are considerably lower than that of thiacyclohexane (9.4 kcal/mol) but slightly higher than the one of 1,1‐dimethylsilacyclohexane (5.5 kcal/mol). The conformational free energy for the methyl group in 2 (?ΔG° = 0.35 kcal/mol) derived from low‐temperature ¹³C NMR data is fairly consistent with the calculated value. For compound 2 , theoretical calculations give ΔE value close to zero for the equilibrium between the 2 ‐Me_ax and 2 ‐Me_eq conformers. The calculated equatorial preference of the trimethylsilyl group in 3 is much more pronounced (?ΔG° = 1.8 kcal/mol) and the predominance of the 3 ‐SiMe_{3 eq} conformer at room temperature was confirmed by the simulated ¹H NMR and 2D NOESY spectra. The effect of the 2‐substituent on the structural parameters of 2 and 3 is discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

The high‐resolution absorption spectroscopy branch on the VUV beamline DESIRS at SOLEIL

A VUV absorption spectroscopy facility designed for ultra‐high spectral resolution is in operation as a dedicated branch on the DESIRS beamline at Synchrotron SOLEIL. This branch includes a unique VUV Fourier transform spectrometer (FTS) and a dedicated versatile gas sample chamber. The FTS instrument can cover a large UV–VUV spectral range from 4 to 30 eV, with an ultimate line width of 0.08 cm^?1 on a large spectral window, ΔE/E = 7%, over which all spectral features can be acquired in a multiplex way. The performance can be considered to be a middle ground between broadband moderate‐resolution spectrometers based on gratings and ultra‐high‐spectral‐resolution VUV tunable‐laser‐based techniques over very narrow spectral windows. The various available gaseous‐sample‐handling setups, which function over a wide range of pressures and temperatures, and the acquisition methodology are described. A selection of experimental results illustrates the performance and limitations of the FTS‐based facility.     

Synthesis and Raman spectroscopic investigation of a new self‐assembly monolayer material 4‐[N‐phenyl‐N‐(3‐methylphenyl)‐amino]‐benzoic acid for organic light‐emitting devices

We have synthesized 4‐[N‐phenyl‐N‐(3‐methylphenyl)‐amino]‐benzoic acid (4‐[PBA]) and investigated its molecular vibrations by infrared and Raman spectroscopies as well as by calculations based on the density functional theory (DFT) approach. The Fourier transform (FT) Raman, dispersive Raman and FT‐IR spectra of 4‐[PBA] were recorded in the solid phase. We analyzed the optimized geometric structure and energies of 4‐[PBA] in the ground state. Stability of the molecule arising from hyperconjugative interactions and charge delocalization was studied using natural bond orbital analysis. The results show that change in electron density in the σ* and π* antibonding orbitals and E₂ energies confirm the occurrence of intramolecular charge transfer within the molecule. Theoretical calculations were performed at the DFT level using the Gaussian 09 program. Selected experimental bands were assigned and characterized on the basis of the scaled theoretical wavenumbers by their total energy distribution. The good agreement between the experimental and theoretical spectra allowed positive assignment of the observed vibrational absorption bands. Finally, the calculation results were applied to simulate the Raman and IR spectra of the title compound, which show agreement with the observed spectra. Copyright © 2011 John Wiley & Sons, Ltd.     

Calculated line broadening coefficients in the ν2 band of CH3D perturbed by helium

Line broadening coefficients have been calculated, at room temperature, for lines in the P and R branches of the ν₂ band of monodeuterated methane. A properly symmetrized semiclassical model with parabolic relative trajectories has been used. Two interaction potential models have been considered. The first is a Lennard-Jones type atom-atom potential, while the second one was derived from ab initio calculations. The calculated line widths were compared to the available experimental data and a satisfactory agreement was found, although the model contains no other adjustable parameters than the four atomic Lennard-Jones ones. Nonetheless, failures of calculations have also been evidenced for the highest rotational quantum numbers.     

FT‐Raman,FT‐IR spectra and DFT calculations on monomeric and dimeric structures of 5‐fluoro‐ and 5‐chloro‐salicylic acid

The experimental and theoretical study on the structures and vibrations of 5‐fluoro‐salicylic acid and 5‐chloro‐salicylic acid (5‐FSA and 5‐ClSA, C₇H₅FO₃ and C₇H₅ClO₃) is presented. The Fourier transform infrared spectra (4000–400 cm⁻¹) and the Fourier transform Raman spectra (4000–50 cm⁻¹) of the title molecules in the solid phase were recorded. The molecular structures, vibrational wavenumbers, infrared intensities, Raman intensities and Raman scattering activities were calculated for a pair of molecules linked by the intermolecular O H···O hydrogen bond. The geometrical parameters and energies of 5‐FSA and 5ClSA were obtained for all eight conformers/isomers from density functional theory (DFT) (B3LYP) with 6‐311++G(d,p) basis set calculations. The computational results identified the most stable conformer of 5‐FSA and 5‐ClSA as the C1 form. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The spectroscopic and theoretical results were compared with the corresponding properties for 5‐FSA and 5‐ClSA monomers and dimer of C1 conformer. The optimized bond lengths, bond angles and calculated wavenumbers showed the best agreement with the experimental results. Copyright © 2010 John Wiley & Sons, Ltd.     

Theoretical and experimental studies on stability of the C‐ON bond in new ketone functionalized N‐alkoxyamines

Three new ketone functionalized N‐alkoxyamines derived from 2,2,6,6‐tetramethylpiperidin‐1‐oxyl (TEMPO) were prepared: N‐(1‐phenylpropyloxy)‐2,2,6,6‐tetramethylpiperidin‐4‐one, 1‐phenyl‐1‐(2,2,6,6‐tetramethylpiperidinoxy)propanone, 1‐phenyl‐1‐(4‐oxo‐2,2,6,6‐tetramethylpiperidinoxy)propanone. The rate constants of C‐ON bonds homolysis in the synthesized alkoxyamines were determined over a range of temperatures via nitroxide‐exchange experiments using HPLC to monitor the concentration. The Arrhenius parameters of homolysis for the investigated alkoxyamines were determined (lnA, E_a). Homolytic bond dissociation energies (BDE) of the C‐ON bond in the synthesized compounds were determined from quantum‐mechanical calculations at the B3‐LYP/6‐31G(d) and BMK/6‐311+G(3df,2p) levels. Ketone functionalization of the alkyl fragment of alkoxyamine in β position dramatically increases the rate constant of homolysis (by a factor of ca. 500 at the temperature of 363 K) suggesting that the new ketone functionalized N‐alkoxyamines should be effective as C‐radical precursor and unimolecular initiators in NMRP at lower temperatures than the alkoxyamines applied earlier. The analyses of natural bond, frontal orbitals and spin distribution indicated that the decrease in the strength of C‐ON bonds in ketone fuctionalized alkoxyamines in the alkyl fragment predominantly originates from a substantially smaller HOMO–LUMO gap and more delocalized spin density in leaving alkyl radicals as compared with unfunctionalized alkoxyamines. Copyright © 2010 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy of 4‐tert‐butylpyridine on a silver electrode

We report the observation of large surface‐enhanced Raman scattering (SERS) (10⁶) for 4‐tert‐butylpyridine molecules adsorbed on a silver electrode surface in an electrochemical cell with electrode potential set at − 0.5 V. A decrease in electrode potential to − 0.3 V was accompanied by a decrease in relative intensities of the vibrational modes. However, there were no changes in vibrational wavenumbers. Comparison of both normal solution Raman and SERS spectra shows very large enhancement of the intensities of a₁, a₂, and b₂ modes at laser excitation of 488 nm. Enhancement of the non‐totally symmetric modes indicates the presence of charge transfer as a contributor to the enhancement. Copyright © 2011 John Wiley & Sons, Ltd.     

Molecular structure and vibrational spectra of 3 (or 4 or 6)‐methyl‐5‐nitro‐2‐pyridinethiones: FT‐IR,FT‐Raman and DFT quantum chemical calculations

IR and Raman spectra (RS) of polycrystalline 3‐(or 4 or 6)‐methyl‐5‐nitro‐2‐pyridinethione have been measured and analyzed by means of density functional theory (DFT) quantum chemical calculations. The B3LYP/6‐311G(2d,2p) approach has been applied for both the thiol and thione tautomers due to the possibility of the formation of these two thiole forms. Molecular structures of these compounds have been optimized starting from different molecular geometries of the thiol group and thione group. Two conformations of the 2‐mercaptopyridine, trans and cis, have been taken into account. It was shown that the studied compounds appear in the solid state in the thione form. The effect of the hydrogen‐bond formation in the studied compounds has been considered. Copyright © 2008 John Wiley & Sons, Ltd.     

Comparative analysis of purely classical and semiclassical approaches to collision line broadening of polyatomic molecules: I. C2H2-Ar case

Semiclassical approaches to the computation of spectral line parameters stay up to nowadays one of the working tools complementary to refined but costly quantum-mechanical methods. Using of the trajectory concept together with quantum treatment of internal molecular motions imposes however the hypothesis of rotation-translation decoupling and translational motion governed by the isotropic potential. When a posteori justified for small heavy colliders, this hypothesis appears as doubtful for long polyatomic molecules. At the same time, purely classical methods, even requiring the artificial procedure of the correspondence principle with quantum mechanics, easily take into account the rototranslational energy transfer through the trajectory governed by the full anisotropic potential. The infrared line broadening of a typically classical C₂H₂-Ar system at various temperatures is analyzed here from these two different points of view. When a refined ab initio potential is chosen to represent the interaction energy, the semiclassical approach leads to a visible overestimation of the line broadening for all values of the rotational quantum number and for all temperatures studied whereas the fully classical treatment gives a quite satisfactory prediction. These fully classical computations show that even for C₂H₂-Ar the rototranslational coupling is quite important, and variations of the translational motion parameters during collisions produce detectable changes in rotation. When, for the sake of a meaningful comparison with the semiclassical approach, the isotropic trajectories are imposed within the classical method, this leads to smaller line widths; the effect strongly depends, however, on the peculiarities of potential energy surface, temperature, and rotational quantum number value.