A comparative study of surface‐enhanced Raman scattering from silver‐coated anodic aluminum oxide and porous silicon

Three types of Ag‐coated arrays from porous anodic aluminum oxide (AAO) were prepared and studied as substrates for surface‐enhanced Raman scattering (SERS). They were compared with Ag‐coated porous silicon (PSi) samples. AAO‐based substrates were prepared by the vapor deposition of silver directly onto the surface of porous AAO with different morphologies of the pores, whereas SERS‐active island films on the PSi were prepared by immersion plating. The resulting metallic nanostructures were characterized by UV‐vis absorption spectroscopy and scanning electron microscopy (SEM). Thermal evaporation leads to the formation of granular arrays of Ag nanoparticles on the surface of AAO. SERS activity of the substrates was tested using water‐soluble cationic Zn(II)‐tetrakis (4‐N‐methylpyridyl) porphyrin (ZnTMPyP4) as a probe molecule. The results indicate that all AAO‐based substrates studied here exhibit some degree of SERS activity. Noteworthy, for excitation at 532 nm, signals from AAO‐based substrates were comparable with those from the PSi‐based ones, whereas for 441.6 nm excitation they were about twice higher. The strongest SERS‐enhancement at 441.6 nm excitationwas provided by the AAO substrates with silver deposited on the monolith (originally nonporous) side of AAO. Preferential SERS‐enhancement of the bands ascribed to the vibrations of the N‐methylpyridinium group of ZnTMPyP4 when going to blue excitation was found. Copyright © 2010 John Wiley & Sons, Ltd.     

Gold‐coated zinc oxide nanowire‐based substrate for surface‐enhanced Raman spectroscopy

Zinc oxide nanowires with two distinct morphologies were synthesized on silicon substrates using a simple thermal evaporation and vapor transport method in an oxidizing environment. The as‐synthesized nanowires were coated with gold to allow excitation of surface plasmons over a broad frequency range. SERS studies with near‐IR excitation at 785 nm showed significant enhancement (average enhancement > 10⁶) with excellent reproducibility to detect monolayer concentrations of 4‐methylbenzenethiol (4‐MBT) and 1,2‐benzendithiol (1,2‐BDT) probe molecules. The Raman enhancement showed a strong dependence on the gold film thickness, and the peak enhancement was observed for a ∼40‐nm‐thick film. The Raman enhancement was stronger for randomly oriented nanowires compared to aligned ones suggesting the importance of contributions from the junctions of nanowires. Copyright © 2009 John Wiley & Sons, Ltd.     

Photochemical decoration of silver nanoparticles on ZnO nanowires as a three‐dimensional substrate for surface‐enhanced Raman scattering measurement

To increase the sensitivity in surface‐enhanced Raman scattering (SERS) measurement, a three‐dimensional (3D) SERS substrate was prepared by the decoration of silver nanoparticles (AgNPs) on the side walls of ZnO nanowires. The prepared 3D SERS substrates provide the advantages of highly loaded density of AgNPs, with a large specific surface area to interact with analytes, and the ease for the analytes to access the surfaces of AgNPs. To prepare the substrates, ZnO nanowires were first grown on a glass plate by wet chemical method. By treating SnCl₂ on the surfaces of ZnO nanowires, Ag seeds could be formed on the side wall of the ZnO nanowires, which were further grown to a suitable size for SERS measurements via photochemical reduction. To optimize and understand the influences of the parameters used in preparation of the substrates, the reaction conditions were systematically adjusted and examined. Results indicated that AgNPs could be successfully decorated on the side wall of the ZnO nanowires only by the assistances of SnCl₂. The size and density of AgNPs were affected by both the concentration of silver nitrate and the irradiation time. With optimized condition, the prepared 3D substrates provided an enhancement factor approaching 7 orders of magnitude compared with conventional Raman intensity. Copyright © 2014 John Wiley & Sons, Ltd.     

Glass‐embedded silver nanoparticle patterns by masked ion‐exchange process for surface‐enhanced Raman scattering

Glass‐embedded silver nanoparticle patterns were fabricated by masked silver–sodium ion‐exchange process followed by etching to reveal the particles for surface‐enhanced Raman scattering (SERS). The intensity of the enhanced Raman signal is comparable to that of the fluorescence, and the detection limit of 1 nM for Rhodamine 6G has been achieved. Raman images at different etching depths and corresponding morphological images are compared to find optimal SERS signal. Our results demonstrate that silver nanoparticle patterns embedded in glass can be used as SERS‐active substrates. Nanoparticles can be formed in a glass of high optical quality and have potential to be integrated with optical waveguides for a sensor chip. Copyright © 2010 John Wiley & Sons, Ltd.     

Microwave monitoring of silver nanoparticle sintering for surface‐enhanced Raman scattering substrates

One of the most widely used methods for surface‐enhanced Raman scattering (SERS) employs silver or gold nanoparticles either in colloidal suspension or in the dry‐drop form. In such substrates the SERS amplification factors depend critically on the interparticle distances. Here, we report that microwave absorption as a function of temperature in dry‐drop substrates can be used as a probe to demarcate temperature regions for thermal annealing to produce SERS substrates with very high amplification factors. Copyright © 2011 John Wiley & Sons, Ltd.     

Ultrathin silver‐coated gold nanoparticles as suitable substrate for surface‐enhanced Raman scattering

Surface‐enhanced Raman scattering (SERS) is an extremely powerful tool for the analysis of the composition of bimetallic nanoparticle (BNP) surfaces because of the different adsorption schemes adopted by several molecules on different metals, such as Au and Ag. The preparation of BNPs normally implies a change in the plasmonic properties of the core metal. However, for technological applications it could be interesting to synthesize core–shell structures preserving these original plasmonic properties. In this work, we present a facile method for coating colloidal gold nanoparticles (NPs) in solution with a very thin shell of silver. The resulting bimetallic Au@Ag system maintains the optical properties of gold but shows the chemical surface affinity of silver. The effectiveness of the coating method, as well as the progressive silver enrichment of the outermost part of the Au NPs, has been monitored through the SERS spectra of several species (chloride, luteolin, thiophenol and lucigenin), which show different behaviors on gold and silver surfaces. A growth mechanism of the Ag shell is proposed on the basis of the spectroscopic and microscopic data consisting in the formation and deposit of Ag clusters on the Au NP surface. Copyright © 2009 John Wiley & Sons, Ltd.     

A potential commercial surface‐enhanced Raman scattering–active substrate: stability and usability

In this article, a surface‐enhanced Raman scattering (SERS)–active substrate with great stability and usability is reported. It is composited with a two‐dimensional ordered array of Ag spherical caps and an aluminum coating. The ordered aluminum template formed during the synthesis of anodic aluminum oxide film was used as the patterned matrix. After sputtering a Ag layer and then peeling off the aluminum template, the patterned structure was replicated on Ag layer. The aluminum template could serve as a coating that protected Ag from being oxidized. Ultraviolet‐visible reflection measurement was performed to monitor the adsorption process of probing molecules. Taking 4‐mercaptopyridine as probing molecules, SERS spectra were investigated. Comparing with the ordinary Ag film, the patterned Ag layer exhibited better SERS activity. The convenience for preparing, storing, and using makes it a promising candidate for SERS application in the fast field analysis. Copyright © 2012 John Wiley & Sons, Ltd.     

Application of surface‐enhanced Raman scattering in cell analysis

In surface‐enhanced Raman scattering (SERS), the scattered intensity is drastically increased due to a resonant interaction with surface plasmons of coin metals. SERS is a nondestructive spectroscopic method applied also to biomedical samples. It inherits the advantages of normal Raman spectroscopy and at the same time overcomes the inherent low sensitivity problem. These properties endow SERS with exciting opportunities to be a successful analytical tool for cell analysis. SERS can be used to detect only molecules located on or close to the metallic nanostructures which can support surface plasmon resonances for the enhancement of the Raman signals. Therefore, these metallic nanostructures play a key role in the application of SERS in cell analysis. By incorporating the SERS substrates into the biosamples, molecular structural probing and cellular imaging become possible. In the past decade, analysts worldwide have developed many schemes to study the chemical changes and component distribution in cells by using SERS. In this paper, the application of SERS in cell analysis is reviewed. Copyright © 2011 John Wiley & Sons, Ltd.     

pH‐dependent surface‐enhanced Raman scattering studies of N‐acetylalanine monolayers self‐assembled on a silver surface

Monolayers of N‐acetylalanine on a metallic surface can serve as a biocompatible functional interface to construct biosensors. In the present paper, the surface‐enhanced Raman scattering (SERS) spectra of N‐acetylalanine monolayers self‐assembled on a silver surface under different pH were recorded. Assignments of the obtained spectra were carried out by density functional theory (DFT) calculations (BLYP/6‐311G). On the basis of the SERS effect, the nature of adsorption of N‐acetylalanine on a silver surface was deduced. It can be concluded that the fully protonated N‐acetylalanine is adsorbed on the silver surface via the imine group together with the carboxylate group, while it anchored onto the surface not only through both the imine and the carboxylate groups but also through the amide group after being completely deprotonated in the basic solution. Copyright © 2007 John Wiley & Sons, Ltd.     

Fabrication of periodical Ag–Au compound nanostructure films with controllable Ag nanoparticle aggregate patterns: a study on surface‐enhanced Raman scattering

The Ag–Au compound nanostructure films with controllable patterns of Ag nanoparticle (NP) aggregates were fabricated. A strategy of two‐step synthesis was employed toward the target products. Firstly, the precursor Au NP (17 nm) films were synthesized as templates. Secondly, the Ag NPs (45 nm) were deposited on the precursor films. Three types of Ag NP aggregates were obtained including discrete Ag NPs (discrete type), necklace‐like Ag NP aggregates (necklace type), and huddle‐like Ag NP aggregates (huddle type). The surface‐enhanced Raman scattering (SERS) property was studied on these nanostructures by using the probing molecule of rhodamine 6G under the excitation laser of 514.5 nm. Interestingly, the different types of samples showed different enhancement abilities. A statistical method was employed to assess the enhancement. The relative enhancement factor for each Ag NP was estimated quantitatively under the ratio of 1 : 25 : 18 for the discrete‐type, necklace‐type, and huddle‐type samples at the given concentration of 10⁻⁸ mol/l. This research shows that the enhancement ability of each Ag NP is dependent on the aggregate morphology. Moreover, the different enhancement abilities displayed different limit detection concentrations up to 10⁻⁸, 10⁻¹¹, and 10⁻⁹ mol/l, separately. The understanding of the relationship between the defined nanostructures and the SERS enhancement is very meaningful for the design of new SERS substrates with better performance. Copyright © 2015 John Wiley & Sons, Ltd.     

pH‐dependent surface‐enhanced Raman scattering of aromatic molecules on graphene oxide

Graphene has become an ideal substrate for surface‐enhanced Raman scattering (SERS) to study the chemical enhancement mechanism. In comparison with mechanically exfoliated graphene, graphene oxide (GO) has been found to be a better substrate due to its highly negatively charged oxygen functional groups. In this work, the pH‐dependent SERS effect of aromatic molecules on GO are investigated. The results demonstrate that the Raman enhancement of dyes deposited on GO performs differently over a wide range of pH values (2 to 10). Adsorption experiments show that the pH‐dependent SERS effect is closely related to the adsorption of aromatic molecules on GO, which is dominated by the electrostatic interaction. Thus, the influence of pH in GO‐mediated SERS should be carefully considered, especially in its biomedical application. Copyright © 2012 John Wiley & Sons, Ltd.     

Analysis of self‐repair mechanisms of Phaseolus vulgaris var. saxa using near‐infrared surface‐enhanced Raman spectroscopy

We used surface‐enhanced Raman spectroscopy (SERS) to investigate ultrastructural changes in cell‐wall composition during the self‐repair of lacerated hypocotyls of Phaseolus vulgaris var. saxa. A detailed study of self‐repair mechanisms requires localized information about cell‐wall structure and morphology in addition to the chemical cell‐wall composition. Characteristic Raman and SER spectra yielded two‐dimensional maps of cross sections of P. vulgaris var. saxa visualizing chemical compositions in the walls of different cell types and during various repair phases. SERS substrate particles were produced by the reduction of gold chloride on the plant tissue surface and characterized with absorption spectroscopy, scanning electron microscopy and energy‐dispersive X‐ray spectroscopy. The SERS results were compared with stained cross sections of the same plant using dark‐field microscopy with focus on lignin and suberin contents in repairing cells. In addition, SERS measurements revealed Au cyanide compounds on the cell surface, indicating the formation of hydrogen cyanide during the self‐repair phase. Copyright © 2009 John Wiley & Sons, Ltd.     

A hybrid substrate for surface‐enhanced Raman scattering spectroscopy: coupling metal nanoparticles to strong localised fields on a micro‐structured surface

Electromagnetic coupling between localised plasmons on metal nanoparticles and the strong localised fields on a micro‐structured surface is demonstrated as a means to increase the enhancement factor in surface‐enhanced Raman scattering (SERS) spectroscopy. Au nanoparticles of diameter 20 nm were deposited on a micro‐structured Au surface consisting of a periodic array of square‐based pyramidal pits (Klarite). The spectra of 4‐aminothiophenol (4‐ATP) were compared before and after deposition of Au nanoparticles on the micro‐structured surface. The addition of Au nanoparticles is shown to provide significantly higher signal intensities, with improvements of the order of ∼10³ per molecule compared with spectra obtained from the micro‐structured substrate alone. This hybrid approach offers promise for combining nanoparticles with micro‐ and nano‐structured surfaces in order to design SERS substrates with higher sensitivities. Copyright © 2011 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering from gold‐coated germanium oxide nanowires

We utilized bulk‐synthesized nanowires (NWs) of germanium dioxide as nanoscale structures that can be coated with noble metals to allow the excitation of surface plasmons over a broad frequency range. The NWs were synthesized on substrates of silicon using gold‐catalyst‐assisted vapor–liquid–solid (VLS) growth mechanism in a simple quartz tube furnace setup. The resulting NWs have diameters of ∼100–200 nm, with lengths averaging ∼10–40 µm and randomly distributed on the substrate. The NWs are subsequently coated with thin films of gold, which provide a surface‐plasmon‐active surface. Surface‐enhanced Raman scattering (SERS) studies with near‐infrared (NIR) excitation at 785 nm show significant enhancement (average enhancement > 10⁶) with good uniformity to detect submonolayer concentrations of 4‐methylbenzenethiol (4‐MBT), trans‐1,2‐bis(4‐pyridyl)ethylene (BPE), and 1,2‐benzendithiol (1,2‐BDT) probe molecules. We also observed an intense, broad continuum in the Raman spectrum of NWs after metal coating, which tended to diminish with the analyte monolayer formation. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation of silver nanoparticles on zinc oxide nanowires by photocatalytic reduction for use in surface‐enhanced Raman scattering measurements

To increase the sensitivity in surface‐enhanced Raman scattering (SERS) measurements, the high surface area of zinc oxide nanowires (ZnO NWs) was used. ZnO NWs on silicon substrates were prepared and used as substrates for further growth of silver nanoparticles (AgNPs). Ultraviolet (UV) irradiation was used to reduce silver ions to AgNPs on the ZnO wires. With proper growth conditions for both ZnO NWs and AgNPs, the substrates exhibit SERS enhancement factors greater than 10⁶. To understand the influences of the morphologies of the ZnO NWs on the growth of AgNPs, the growing time and temperature were varied. The concentration of silver nitrate and irradiation time of UV radiation were also varied. The resulting AgNPs were probed with para‐nitrothiophenol to quantify the SERS enhancements obtained from the varying conditions. The results indicate that ZnO NWs could be grown at temperatures higher than 490 °C and higher growth temperatures result in smaller diameter of the formed ZnO NWs. Also, the morphologies of ZnO NWs did not significantly alter the SERS signals. The concentration of silver nitrate affects the SERS signals significantly and the optimal concentration was found to be in the range of 10–20 mM. With irradiation times longer than 90 s, the resulting AgNPs showed similar SERS intensities. With optimized conditions, the AgNPs/ZnO substrates are highly suitable for SERS measurements with a typical enhancement factor of higher than 10⁶. Copyright © 2010 John Wiley & Sons, Ltd.     

Adsorption of 1,2,4‐triazole on a silver electrode: surface‐enhanced Raman spectroscopy and density functional theory studies

The pH‐dependent surface‐enhanced Raman scattering (SERS) of 1,2,4‐triazole adsorbed on silver electrode and normal Raman (NR) spectra of this compound in the aqueous solutions were investigated. The observed bands in the NR and SERS spectra were assigned with the help of density functional theory calculations for model molecules in the neutral, anionic, and cationic forms and their complexes with silver. The Raman wavenumbers and intensities were computed at the optimized molecular geometry. Vibrational assignments of the SERS and NR spectra are provided by calculated potential energy distributions. The combination of experimental SERS results and density functional theory calculations provide an insight into the molecular structure of adlayers formed by 1,2,4‐triazole on a silver surface at varying pH values and enable the determination of molecular orientation with respect to the surface. Copyright © 2012 John Wiley & Sons, Ltd.     

Photodissociation effects on pulsed laser deposited silver oxide thin films: surface‐enhanced resonance Raman scattering

Temporal Raman scattering measurements with 488, 532 and 632 nm excitation wavelengths and normal Raman studies by varying the power (from 30 W/cm² to 2 MW/cm²) at 488 nm were performed on silver oxide thin films prepared by pulsed‐laser deposition. Initially, silver oxide Raman spectra were observed with all three excitation wavelengths. With further increase in time and power, silver oxide photodissociated into silver nanostructures. High‐intensity spectral lines were observed at 1336 ± 25 and 1596 ± 10 cm⁻¹ with 488 nm excitation. No spectral features were observed with 633 nm excitation. Surface‐enhanced resonance Raman scattering theory is used to explain the complex behavior in the intensity of the 1336/1596 cm⁻¹ lines with varying power of 488 nm excitation. Copyright © 2011 John Wiley & Sons, Ltd.     

Bridging biomolecules with nanoparticles: surface‐enhanced Raman scattering from colon carcinoma and normal tissue

In order to get insight into the chemical heterogeneities of solid tumors, here we report the first surface‐enhanced Raman scattering (SERS) experiment from normal and altered epithelial layer in human colon carcinoma tissues. The Ag colloidal nanoparticles that can be incorporated into the interstitial space in solid tumors or those penetrating into cytoplasm or nucleus of many cells allowed high quality SERS signal. Different tissue structures of tumor and normal colon have characteristic features in SERS spectra. Prominent SERS features of malignant tissue spectra are related to the strong enhancement of the bands preponderantly attributable to DNA or RNA bases. The preliminary studies demonstrate that it is possible to probe Ag colloidal nanoparticles adsorption onto the tissue resulting in a strong molecular signaling with high specificity and rapid acquisition time using visible laser line excitation. Copyright © 2008 John Wiley & Sons, Ltd.     

Multiplex identification of bacteria in bacterial mixtures with surface‐enhanced Raman scattering

Surface‐enhanced Raman scattering (SERS) is a technique capable of identifying each component in a mixture because of its intrinsically narrow spectral bands. In a clinical setting, the identification of bacteria from its initial culture by collecting the colonies on the culture plate significantly decreases the analysis time and the cost. The identification of bacteria from their mixtures is attempted using SERS. A simple mixing procedure of bacterial samples and concentrated colloidal suspension is proven to be mostly satisfactory for the generation of the reproducible SERS spectra that can be used for bacterial identification. The mixture of three different but related bacterial species Shigella sonnei, Proteus vulgaris, and Erwinia amylovara and three Escherichia coli strains (BFK13, BHK7, DH5 α) are used as model systems to test the feasibility of the approach. The results indicate that it is possible to identify the composition of a bacterial mixture. This approach can easily be utilized for the bacteria originating from the same source with similar growth profiles. Copyright © 2009 John Wiley & Sons, Ltd.     

Characterization of 6‐propylthiouracil and its interaction with human serum albumin on Au surface by surface‐enhanced Raman scattering

In this study, surface‐enhanced Raman scattering (SERS) spectra of 6‐propylthiouracil (6‐PTU) on Au surface and the interaction between 6‐PTU and human serum albumin (HSA) were studied. The Raman bands were assigned by the density functional theory calculations at the B3LYP/6‐311++g(d,p) level. Furthermore, the effects of concentration on the SERS spectra of 6‐PTU were analyzed. It shows that with the changes of the concentrations of 6‐PTU, the SERS spectra of 6‐PTU present significant changes, and it can be concluded that with the changing of concentrations, the orientation of 6‐PTU on Au surface also changes. In addition, the SERS spectra of the interaction between 6‐PTU and HSA show that the binding sites of 6‐PTU to HSA are the functional groups N3H and CO. The information will not only be references to the study of the mechanism of the interaction between drugs and blood plasma or serum albumin but also a guidance to understand the metabolism of drugs in human body. Copyright © 2015 John Wiley & Sons, Ltd.