Ion-transfer voltammetry of local anesthetics at an organic solvent/water interface and pharmacological activity vs. ion partition coefficient relationship.

The ion-transfer reaction of local anesthetics at an organic solvent/water interface has been studied using cyclic voltammetry (CV) with a stationary nitrobenzene (NB)/water (W) interface. Procaine and seven other local anesthetics gave reversible or quasi-reversible voltammograms at the NB/W interface in the pH range between 0.9 and 9.6. These drugs are present in aqueous solution in either neutral or ionic form, or both forms. The half-wave potential, as determined by the midpoint potential in CV, vs. pH curves, were determined and analyzed to determine the partition coefficients of both neutral and ionic forms of the drugs between NB and W. The partition coefficients of the ionic forms were derived from their formal potential of transfer at an NB/W interface. The dissociation constants of ionic forms of the drugs in NB were also deduced. A high correlation between the pharmacological activity and the partition coefficient of the ionic form of amide-linked local anesthetics has been shown.     

Probing non-polarizable liquid/liquid interfaces using scanning ion conductance microscopy

The study of microscopic structure of a liquid/liquid interface is of fundamental importance due to its close relation to the thermodynamics and kinetics of interfacial charge transfer reactions.In this article,the microscopic structure of a non-polarizable water/nitrobenzene(W/NB) interface was evaluated by scanning ion conductance microscope(SICM).Using SICM with a nanometer-sized quartz pipette filled with an electrolyte solution as the probe,the thickness of this type of W/NB interface could be measured at sub-nanometer scale,based on the continuous change of ionic current from one phase to another one.The effects for thicknesses of the non-polarizable W/NB interfaces with different electrolyte concentrations,the Galvani potentials at the interface and the applied potentials on the probe were measured and systematically analyzed.Both experimental setups,that is an organic phase up and an aqueous down,and a reverse version,were employed to acquire the approach curves.These data were compared with those of an ideal polarizable interface under the similar experimental conditions,and several characteristics of non-polarizable interfaces were found.The thickness of a non-polarizable interface increases with the decrease of electrolyte concentration and the increase of applied potential,which is similar to the situation of a polarizable liquid/liquid interface.We also find that the Galvani potential across a non-polarizable interface can also influence the interfacial thickness,this phenomenon is difficult to observe when using polarizable interface.Most importantly,by the comparison of two kinds of liquid/liquid interfaces,we experimentally proved that much more excess ions are gathered in the space charge layer of non-polarizable interfaces than in that of polarizable interfaces.These results are consistent with the predictions of molecular dynamic simulations and X-ray reflectivity measurements.     

Amperometric Determination of Creatinine with a Dialysis Membrane‐Covered Nitrobenzene/Water Interface for Urine Analysis

The ion transfer of creatinine (CRE) at a polarized nitrobenzene (NB)/water (W) interface has been studied. When the pH of the W phase is in the range of 1.2 to 4.0, a well‐defined voltammetric wave is observed for a simple transfer of CRE⁺ (protonated form) at the NB/W interface. This transfer reaction has been applied to develop an amperometric method for the determination of CRE in urine. In this system, the NB/W interface is covered with a dialysis membrane to prevent possible interference from urine proteins. The concentration of CRE in a urine control has successfully been determined.     

Potential-dependent adsorption and transfer of poly(diallyldialkylammonium) ions at the nitrobenzene|water interface

Electrochemically driven adsorption and partition of a series of poly(diallyldialkylammonium) ions (PDADAA(+): alkyl = methyl, ethyl, propyl, and butyl) at the nitrobenzene (NB)|water (W) interface have been studied using voltammetry and electrocapillary measurements. When the phase-boundary potential, Δφ, that is, the inner potential of the W phase referred to that of the NB phase, is negative, poly(diallyldimethylammonium) (PDADMA(+)) shows little surface activity. The scanning of Δφ in the positive direction induces, first, the adsorption of PDADMA(+) at the interface and, then, the desorption of adsorbed PDADMA(+) ions into the NB phase, followed by the diffusion-limited transfer of PDADMA(+) from W to NB. The elongation of the dialkyl chains gives the stronger surface activity of PDADAA(+) even when Δφ < 0. The PDADAA(+) polyions studied are only slightly more hydrophilic than the corresponding monomers. However, the polycationic character of PDADAA(+) renders the adsorption, desorption, and ion transfer strongly dependent on Δφ and gives rise to unusual, M-shaped electrocapillary curves. The interplay of adsorption-desorption and ion transfer of PDADAA(+) ions induces the electrochemical instability of the interface and the emulsion formation on the NB side of the interface.     

Cyclic voltammetry of the transfer of anionic surfactant across the liquid–liquid interface manifests electrochemical instability

Experimental evidence for the presence of the instability window in the polarized potential range of the phase-boundary potential has been obtained in cyclic voltammograms in the presence of the transfer of anionic surfactants across the 1,2-dichloroethane–water interface. Irregular current spikes and fluctuations appeared in the vicinity of the half-wave potential for the transfer of decyl sulfonate and dodecyl sulfate ions. Chaotic current became more pronounced with increasing the concentration of the ionic surfactant. This trend was in excellent agreement with the theoretical prediction based on the recently proposed concept of the electrochemical instability.     

Voltammetric study of the transfer of fluoride ion at the nitrobenzene / water interface assisted by tetraphenylantimony.

The transfer of F- ion assisted by an organometallic complex cation tetraphenylantimony (TPhSb+) across the polarized nitrobenzene / water (NB / W) interface has been studied by means of ion-transfer voltammetry. A well-defined voltammetric wave was observed within the potential window at the NB / W interface when tetraphenylantimony tetrakis(4-chlorophenyl) borate and F- ion were present in NB and W, respectively. The voltammogram can be interpreted as being due to the reversible transfer of F- ion assisted by the formation of the TPhSbF complex through the coordination of F- to Sb atom in NB. The formal formation constant of TPhSbF in NB has been determined to be 10(1.95 +/- 0.2 M(-1). No voltammetric wave due to the TPhSb(+)-assisted transfer of other anions such as Cl-, Br, I-, NO3-, CH3COO- and H2PO4(-) ions has been observed within the potential window.     

Ion transfer of bromophenol blue across liquid-liquid interfaces

The ion transfer of the acidic dye bromophenol blue (BPB) at the interfaces of water/nitrobenzene (W/NB), water/1,2-dichloroethane (W/1,2-DCE) and water/(nitrobenzene+chlorobenzene) (W/(NB +CB)) was studied in detail by cyclic voltammetry (CV), chronopotentiometry with linear current scanning (CLC), controlled potential electrolysis and UV spectroscopic methods. Using controlled potential electrolysis, we observed successfully the transfer process of BPB across the W/NB interface from the colour changes of BPB in two different phases. The proposed transfer mechanism for BPB is proved to be reasonable using UV spectroscopy of the product of the electrolysis. The standard potential differences Δ^o_w^o and the standard Gibbs energies of the BPB transfer from water to some organic solvents were calculated. The dissociation constants of BPB obtained were quite close to the literature values.     

铬天青S的液/液界面离子转移过程

本文研究了酸性染料显色剂铬天青S的液/液界面离子转移行为, 用循环伏安法和电流扫描计时电位法研究了铬天青S在水/硝基苯和水/1,2-二氯乙烷两种界面上的离子转移过程, 根据铬在青S在溶液中的离解平衡和电化学性质, 讨论了界面离子转移机理,研究了基础电解质和溶剂对铬天青S转移性能的影响, 在Britton-Robinson缓冲溶液中测得半波电位PH曲线与理论公式相一致, 由本法所得离解常数与文献值接近, 计算了转移离子的标准转移电位和标准吉布斯转移能。     

A comparative study of the anion transfer kinetics across a water/nitrobenzene interface by means of electrochemical impedance spectroscopy and square-wave voltammetry at thin organic film-modified electrodes

The kinetics of the transfer of a series of hydrophilic monovalent anions across the water/nitrobenzene (W/NB) interface has been studied by means of thin organic film-modified electrodes in combination with electrochemical impedance spectroscopy and square-wave voltammetry. The studied ions are Cl-, Br-, I-, ClO4-, NO3-, SCN-, and CH3COO-. The electrode assembly comprises a graphite electrode (GE) covered with a thin NB film containing a neutral strongly hydrophobic redox probe (decamethylferrocene or lutetium bis(tetra-tert-butylphthalocyaninato)) and an organic supporting electrolyte. The modified electrode is immersed in an aqueous solution containing a supporting electrolyte and transferring ions, and used in a conventional three-electrode configuration. Upon oxidation of the redox probe, the overall electrochemical process proceeds as an electron-ion charge-transfer reaction coupling the electron transfer at the GE/NB interface and compensates ion transfer across the W/NB interface. The rate of the ion transfer across the W/NB interface is the limiting step in the kinetics of the overall coupled electron-ion transfer reaction. Moreover, the transferring ion that is initially present in the aqueous phase only at a concentration lower than the redox probe, controls the mass transfer regime in the overall reaction. A rate equation describing the kinetics of the ion transfer that is valid for the conditions at thin organic film-modified electrodes is derived. Kinetic data measured with two electrochemical techniques are in very good agreement.     

Single Fusion Events at Polarized Liquid–Liquid Interfaces

A new electrochemical framework for tracking individual soft particles in solution and monitoring their fusion with polarized liquid–liquid interfaces is reported. The physicochemical principle lies in the interfacial transfer of an ionic probe confined in the particles dispersed in solution and that is released upon their collision and fusion with the fluid interface. As a proof‐of‐concept, spike‐like transients of a stochastic nature are reported in the current–time response of 1,2‐dichloroethane(DCE)|water(W) submilli‐interfaces after injection of DCE‐in‐W emulsions. The sign and potential dependence of the spikes reflect the charge and lipophilicity of the ionic load of the droplets. A comparison with dynamic light scattering measurements indicates that each spike is associated with the collision of a single sub‐picoliter droplet. This opens a new framework for the study of single fusion events at the micro‐ and nanoscale and of ion transport across biomimetic soft interfaces.     

Single Fusion Events at Polarized Liquid–Liquid Interfaces

A new electrochemical framework for tracking individual soft particles in solution and monitoring their fusion with polarized liquid–liquid interfaces is reported. The physicochemical principle lies in the interfacial transfer of an ionic probe confined in the particles dispersed in solution and that is released upon their collision and fusion with the fluid interface. As a proof-of-concept, spike-like transients of a stochastic nature are reported in the current–time response of 1,2-dichloroethane(DCE)|water(W) submilli-interfaces after injection of DCE-in-W emulsions. The sign and potential dependence of the spikes reflect the charge and lipophilicity of the ionic load of the droplets. A comparison with dynamic light scattering measurements indicates that each spike is associated with the collision of a single sub-picoliter droplet. This opens a new framework for the study of single fusion events at the micro- and nanoscale and of ion transport across biomimetic soft interfaces.     

A true electron-transfer reaction between 5,10,15,20-tetraphenylporphyrinato cadmium(II) and the hexacyanoferrate couple at the nitrobenzene/water interface.

The ability of some metal complexes of 5,10,15,20-tetraphenylporphyrin (TPP) to give a voltammetric wave due to the heterogeneous electron transfer (ET) at a nitrobenzene (NB)/water (W) interface has been examined. The previously-proposed, electron-conductor separating oil-water (ECSOW) system has been successfully employed to find that the TPP complex with cadmium(II) added to NB gives a well-defined, reversible wave for the heterogeneous (i.e., "true") ET with the hexacyanoferrate couple in W. A digital simulation analysis has entirely excluded the possibility of the ion-transfer mechanism due to the homogeneous ET in W. The a.c. impedance method has then been used to determine the kinetic parameters including the standard rate constant k0 (= 0.10 cm M(-1) s(-1)) and the transfer coefficient alpha (= 0.53 at the half-wave potential). These values are in good agreement with those predicted from the Marcus theory with the assumption that the heterogeneous ET due to molecular collision occurs at the "sharp" NB/W interface.     

Electron-conductor separating oil–water (ECSOW) system: a new strategy for characterizing electron-transfer processes at the oil/water interface

A new electrochemical method for studying the electron transfer (ET) at the oil (O)/water (W) interface (or the liquid/liquid) interface has been devised, in which the O- and W-phases are separated by an electron conductor (EC; e.g. Pt). For the EC separating O–W (ECSOW) system, the ET across the EC phase can be observed voltammetrically in a similar manner to the O/W interface, however, no ion-transfer (IT) process can be taken place. Although the ECSOW system is thermodynamically equivalent to the corresponding O/W interface, they may be different from a kinetic viewpoint. In practice, the cyclic voltammograms obtained with the nitrobenzene NB/W interface and the ECSOW system in the presence of ferrocene in NB and hexacyanoferrate in W have shown quite different features, when the concentrations of both redox species are lower. The voltammograms for the NB/W interface have strongly supported the IT mechanism which involves an interfacial transfer of ferricenium ion. Also, the ECSOW system has been shown to be promising for clarification of complicated charge-transfer processes involving biological compounds such as l-ascorbic acid.     

液/液界面新溶剂体系的电化学研究

用循环伏安法测定了离子在水-异硫氰酸烯丙脂(AIT)体系中的标准转移Gibbs能△_o~w G_(tr,i)~0。对含有AIT的混合溶剂的研究, 发现了一系列电位窗比较宽的水/有机溶剂体系, 讨论了溶剂效应对△_o~w G_(tr,i)~0的影响。     

Observation of the marcus inverted region of electron transfer reactions at a liquid/liquid interface

Scanning electrochemical microscopy was used to probe the influence of a driving force on the heterogeneous electron transfer (ET) processes at the externally polarized water/1,2-dichloroethane interface. Being a part of the driving force, the Galvani potential difference at the interface, Deltaowphi, can be quantitatively controlled in a wide range, allowing the precise measurements of the rate constants of the ET reactions. Two opposite systems were chosen in this work. One was 5,10,15,20-tetraphenyl 21H,23H-porphyrin zinc (ZnPor, O)/Fe(CN)64- (W), and the other was TCNQ (O)/Fe(CN)63- (W). For both systems studied, the relations between the rate constant and the Deltaowphi were of parabolic shape; that is, the rate constants increased initially with the Deltaowphi until reaching a maximum and then decreased steadily as the Deltaowphi increased further. This is in accordance with the prediction of the Marcus theory. To our knowledge, this is the first report that the Marcus inverted region can be observed electrochemically at an unmodified liquid/liquid interface with only one redox couple at each phase. The effect of the concentrations of the organic supporting electrolyte has also been discussed in detail.     

Cyclic Voltammetry of Ion Transfer for Phenylpropanolamine Hydrochloride at Water|Nitrobenzene Interface

The transfer on phenylpropanolamine ion, PPAH⁺, has been studied at the Interface between Two Immiscible Solutions (ITIES). The polarizable potential range was determined by cyclic voltammetry at the interface between an aqueous solution of lithium chloride (LiCl) and a nitrobenzene (NB) solution of electrolyte tetrabutylammonium tetraphenylborate (TBATPB). The half‐wave potential of ion transfer for phenylpropanolamine accross the water|NB interface was found 465.3 mV. The peak separation, the diffusion coefficient, and the standard ion transfer potential of PPAH⁺ were observed to be 59.1 mV, 1.7 × 10^?6 cm²/s, and 104.6 mV, respectively. The temperature of experiment was kept constantly at 25 ± 1 °C using water flow thermostate.     

Simple electrochemical method for deposition and voltammetric inspection of silver particles at the liquid-liquid interface of a thin-film electrode

A novel experimental methodology for depositing and voltammetric study of Ag nanoparticles at the water-nitrobenzene (W-NB) interface is proposed by means of thin-film electrodes. The electrode assembly consists of a graphite electrode modified with a thin NB film containing decamethylferrocene (DMFC) as a redox probe. In contact with an aqueous electrolyte containing Ag(+) ions, a heterogeneous electron-transfer reaction between DMFC((NB)) and Ag(+)((W)) takes place to form DMFC(+)((NB)) and Ag deposit at the W-NB interface. Based on this interfacial reaction, two different deposition strategies have been applied. In the uncontrolled potential deposition protocol, the electrode is immersed into an AgNO(3) aqueous solution for a certain period under open circuit conditions. Following the deposition step, the Ag-modified thin-film electrode is transferred into an aqueous electrolyte free of Ag(+) ions and voltammetrically inspected. In the second protocol the deposition was carried out under controlled potential conditions, i.e., in an aqueous electrolyte solution containing Ag(+) ions by permanent cycling of the electrode potential. In this procedure, DMFC((NB)) is electrochemically regenerated at the electrode surface, hence enabling continuation and voltammetric control of the Ag deposition. Hence, the overall electrochemical process can be regarded as an electrochemical reduction of Ag(+)((W)) at the W-NB interface, where the redox couple DMFC(+)/DMFC acts as a mediator for shuttling electrons from the electrode to the W-NB interface. Ag-particles deposited at the W-NB interface affect the ion transfer across the interface, which provides the basis for voltammetric inspection of the metal deposit at the liquid-liquid interface with thin-film electrodes. Voltammetric properties of thin-film electrodes are particularly sensitive to the deposition procedure, reflecting differences in the properties of the Ag deposit. Moreover, this methodology is particularly suited to inspect catalytic activities of metal particles deposited at the liquid-liquid interface toward heterogeneous electron-transfer reactions occurring at the at the liquid-liquid interface.     

Ion transport across a bilayer lipid membrane facilitated by valinomycin

The facilitated ion transport from one aqueous phase, W1, to another, W2, across a bilayer lipid membrane, BLM, containing valinomycin, Val, as an ionophore was investigated by voltammetry. Cyclic voltammograms for the ion transfer were symmetrical about the origin (0 V, 0 A) and the magnitude of the ion transfer current increased with an increase in the absolute value of the applied potential. The magnitude of the ion transfer current at a definite potential in the voltammograms depended on the cation species added to W1 and W2 and was proportional to the concentration of Val in the BLM. The magnitude of the ion transfer current at a definite potential also varied in proportion to the hydrophobicity of the counter anion in W1 and W2. Taking into account the conjugated ion transfers at the W1|BLM and BLM|W2 interfaces, the positive current that flowed from W1 to W2 across the BLM was attributable to both the transfer of the complex-forming cation from W1 to the BLM and the transfer of the anion, which was distributed in the BLM as the counter ion from W2 to W1. The transfer from the BLM to W1 occurred at the W1|BLM interface and both the transfer of the cation from the BLM to W2 and the transfer of the anion from W2 to the BLM at the BLM|W2 interface. The negative current was then attributed to the opposite reaction. The voltammograms were asymmetrical with the origin when the ion components in W1 and W2 were different.     

Spontaneous and facilitated micelles formation at liquid|liquid interface: towards amperometric detection of redox inactive proteins

Spontaneous micelles formation by ionic surfactants has been detected amperometrically as an appearance of ion transfer across the water–dichloroethane interface noticed from linear dependence between the current and potential (Ohm’s law). At low surfactant concentrations, when its spontaneous aggregation does not occur, the micelles formation facilitated by a potential across the interface has been registered. The transfer of redox inactive proteins through water–dichloroethane interface in the presence of surfactant has been observed voltammetrically. It has been shown, that the presence of protein does not affect thermodynamics of micelles formation, but accelerates kinetics of ion transfer through the interface. The electrochemically controlled transfer of redox inactive proteins through liquid|liquid interface may lead to the development of methods for direct amperometric detection of biomolecules.