pH‐Responsive Self‐Assembly by Molecular Recognition on a Macroscopic Scale

Macroscopic pH‐responsive self‐assembly is successfully constructed by polyacrylamide(pAAm)‐based gels carrying dansyl (Dns) and β‐cyclodextrin (βCD) residues, which are represented as Dns‐gel and βCD‐gel, respectively. Dns‐gel and βCD‐gel assemble together at pH ≥ 4.0, but disassemble at pH ≤ 3.0. The adhesion strengths for pairs of Dns‐gel/βCD‐gel increase with increasing pH. The fluorescence study on the model system of pAAm modified with 1 mol% Dns moieties (pAAm/Dns) reveals that Dns residues are protonated at a lower pH, which results in the reduction in binding constant (K) for Dns residues and βCD.

     

A Self‐Assembly Approach to Temperature‐Responsive Polymer Nanocontainers

Summary: Thermosensitive polymer nanocontainers were formed by self‐assembly of diblock copolymers poly(2‐cinnamoylethyl methacrylate)‐block‐poly(N‐isopropylacrylamide) (PCEMA‐block‐PNIPAM) and subsequent photo‐crosslinking of the PCEMA shells. It was found that the diameter of the nanocontainers ranges from tens of nanometers to thousands of nanometers, depending on the self‐assembly conditions. The phase transition of the nanocontainers takes place at 32 °C; the structural changes are reversible in a heating and cooling cycle.

Schematic illustration of the structural transition behavior of the thermosensitive polymer nanocontainers.     

Self‐Assembly of π‐Conjugated Gelators into Emissive Chiral Nanotubes: Emission Enhancement and Chiral Detection

A series of new π‐conjugated gelators that contain various aromatic rings (phenyl, naphthyl, 9‐anthryl) and amphiphilic L ‐glutamide was designed, and their gel formation in organic solvents and self‐assembled nanostructures was investigated. The gelators showed good gelation ability in various organic solvents that ranged from polar to nonpolar. Those gelator molecules with small rings such as phenyl and naphthyl self‐assembled into nanotube structures in most organic solvents and showed strong blue emission. However, the 9‐anthryl derivative formed only a nanofiber structure in any organic solvent, probably owing to the larger steric hindrance. All of these gels showed enhanced fluorescence in organogels. Furthermore, during the gel formation, the chirality at the L ‐glutamide moiety was transferred to the nanostructures, thus leading to the formation of chiral nanotubes. One of the nanotubes showed chiral recognition toward the chiral amines.     

Oligo(p‐phenylene‐ethynylene)‐Derived Super‐π‐Gelators with Tunable Emission and Self‐Assembled Polymorphic Structures

Linear π‐conjugated oligomers are known to form organogels through noncovalent interactions. Herein, we report the effect of π‐repeat units on the gelation and morphological properties of three different oligo(p‐phenylene‐ethynylene)s: OPE3 , OPE5 , and OPE7 . All of these molecules form fluorescent gels in nonpolar solvents at low critical gel concentrations, thereby resulting in a blue gel for OPE3 , a green gel for OPE5 , and a greenish yellow gel for OPE7 . The molecule–molecule and molecule–substrate interactions in these OPEs are strongly influenced by the conjugation length of the molecules. Silicon wafer suppresses substrate–molecule interactions whereas a mica surface facilitates such interactions. At lower concentrations, OPE3 formed vesicular assemblies and OPE5 gave entangled fibers, whereas OPE7 resulted in spiral assemblies on a mica surface. At higher concentrations, OPE3 and OPE5 resulted in super‐bundles of fibers and flowerlike short‐fiber agglomerates when different conditions were applied. The number of polymorphic structures increases on increasing the conjugation length, as seen in the case of OPE7 with n=5, which resulted in a variety of exotic structures, the formation of which could be controlled by varying the substrate, concentration, and humidity.     

An Adjustable pH‐Responsive Drug Delivery System Based on Self‐Assembly Polypeptide‐Modified Mesoporous Silica

In this study, an adjustable pH‐responsive drug delivery system using mesoporous silica nanoparticles (MSNs) as the host materials and the modified polypeptides as the nanovalves is reported. Since the polypeptide can self‐assemble via electrostatic interaction at pH 7.4 and be disassembled by pH changes, the modified poly(l ‐lysine) and poly(l ‐glutamate) are utilized for pore blocking and opening in the study. Poly(l ‐lysine)‐MSN (PLL‐MSN) and poly(l ‐glutamate)‐MSN (PLG‐MSN) are synthesized via the ring opening polymerization of N‐carboxyanhydrides onto the surface of mesoporous silica nanoparticles. The successful modification of the polypeptide on MSN is proved by Zeta potential change, X‐ray photoelectron spectroscopy (XPS), solid state NMR, and MALDI‐TOF MS. In vitro simulated dye release studies show that PLL‐MSN and PLG‐MSN can successfully load the dye molecules. The release study shows that the controlled release can be constructed at different pH by adjusting the ratio of PLL‐MSN to PLG‐MSN. Cellular uptake study indicates that the drug is detected in both cytoplasm and nucleus, especially in the nucleus. In vitro cytotoxicity assay indicates that DOX loaded mixture nanoparticles (ratio of PLL‐MSN to PLG‐MSN is 1:1) can be triggered for drug release in HeLa cells, resulting in 88% of cell killing.     

pH‐Triggered Self‐Assembly of Cellulose Oligomers with Gelatin into a Double‐Network Hydrogel

Multicomponent systems for self‐assembled molecular gels provide huge opportunities to generate collective or new functions that are not inherent in individual single‐component gels. However, gelation tends to require careful and complicated procedures, because, among a myriad of kinetically trapped structures related to the degree of mixing of multiple components over a wide range of scales, from molecular level to macroscopic scale, a limited number of structures that exhibit the desired function need to be constructed. This study presents a simple method for the construction of double‐network (DN) hydrogels with improved stiffness composed of crystalline cellulose oligomers and gelatin. The pH‐triggered self‐assembly of cellulose oligomers leads to the formation of robust networks composed of crystalline nanofibers in the presence of dissolved gelatin, followed by cooling to allow for the formation of soft gelatin networks. The resultant DN hydrogels exhibit improved stiffness; the improvement in gel stiffness with double networking is comparable to that of previously reported DN hydrogels produced via a time‐consuming enzymatic reaction.     

Efficacious Anticancer Drug Delivery Mediated by a pH‐Sensitive Self‐Assembly of a Conserved Tripeptide Derived from Tyrosine Kinase NGF Receptor

We present herein a short tripeptide sequence (Lys–Phe–Gly or KFG) that is situated in the juxtamembrane region of the tyrosine kinase nerve growth factor (Trk NGF) receptors. KFG self‐assembles in water and shows a reversible and concentration‐dependent switching of nanostructures from nanospheres (vesicles) to nanotubes, as evidenced by dynamic light scattering, transmission electron microscopy, and atomic force microscopy. The morphology change was associated with a transition in the secondary structure. The tripeptide vesicles have inner aqueous compartments and are stable at pH 7.4 but rupture rapidly at pH≈6. The pH‐sensitive response of the vesicles was exploited for the delivery of a chemotherapeutic anticancer drug, doxorubicin, which resulted in enhanced cytotoxicity for both drug‐sensitive and drug‐resistant cells. Efficient intracellular release of the drug was confirmed by fluorescence‐activated cell sorting analysis, fluorescence microscopy, and confocal microscopy.     

Phosphate‐Triggered Self‐Assembly of N‐[(Uracil‐5‐yl)methyl]urea: A Minimalistic Urea‐Derived Hydrogelator

N‐[(Uracil‐5‐yl)methyl]urea is reported as a minimalistic low‐molecular‐weight hydrogelator (LMWHG). The unusual phosphate‐induced assembly of this compound has been thoroughly investigated by IR, UV/Vis, and NMR spectroscopy, electron microscopy, and rheological experiments. This rare example of an anion‐triggered urea‐based LMWHG is the first example of a pyrimidine‐ and urea‐containing molecule that can be forced into self‐assembly in aqueous solution without additional aromatic or lipophilic groups. The gelator/phosphate ratio within the hydrogel was successfully determined by ³¹P MAS NMR spectroscopy. The hydrogel exhibits a very fast and repeatable self‐healing property, and remarkable G′ values. The viscoelastic properties of the hydrogel can easily be tuned by variation of the phosphate ratio.     

Synthesis and Self‐Assembly of pH‐Responsive Amphiphilic Poly(dimethylaminoethyl methacrylate)‐block‐Poly(pentafluorostyrene) Block Copolymer in Aqueous Solution

We report the synthesis of a novel pH‐responsive amphiphilic block copolymer poly(dimethylaminoethyl methacrylate)‐block‐poly(pentafluorostyrene) (PDMAEMA‐b‐PPFS) using RAFT‐mediated living radical polymerization. Copolymer micelle formation, in aqueous solution, was investigated using fluorescence spectroscopy, static and dynamic light scattering (SLS and DLS), and transmission electron microscopy (TEM). DLS and SLS measurements revealed that the diblock copolymers form spherical micelles with large aggregation numbers, N_agg ≈ 30 where the dense PPFS core is surrounded by dangling PDMAEMA chains as the micelle corona. The hydrodynamic radii, R_h of these micelles is large, at pH 2–5 as the protonated PDMAEMA segments swell the micelle corona. Above pH 5, the PDMAEMA segments are gradually deprotonated, resulting in a lower osmotic pressure and enhanced hydrophobicity within the micelle, thus decreasing the R_h. However, the radius of gyration, R_g remains independent of pH as the dense PPFS cores predominate.

     

Chiral Hexa‐ and Nonamethylene‐Bridged Bis(L‐Leu‐oxalamide) Gelators: The First Oxalamide Gels Containing Aggregates with a Chiral Morphology

Chiral amino acid‐ and amino alcohol‐oxalamides are well‐known as versatile and efficient gelators of various lipophilic and polar organic solvents and water. To further explore the capacity of the amino acid/oxalamide structural fragment as a gelation‐generating motif, the dioxalamide dimethyl esters 1₆Me and 1₉Me , and dicarboxylic acid 2₆OH / 2₉OH derivatives containing flexible methylene bridges with odd ( 9 ; n=7) and even ( 6 ; n=4) numbers of methylene groups were prepared. Their self‐assembly motifs and gelation properties were studied by using a number of methods (FTIR, ¹H NMR spectroscopy, CD, TEM, DSC, XRPD, molecular modeling, MMFF94, and DFT). In contrast to the previously studied chiral bis(amino acid or amino alcohol) oxalamide gelators, in which no chiral morphology was ever observed in the gels, the conformationally more flexible 1₆Me , 1₉Me , 2₆OH , and 2₉OH provide gelators that are capable of forming diverse aggregates of achiral and chiral morphologies, such as helical fibers, twisted tapes, nanotubules, straight fibers, and tapes, in some cases coexisting in the same gel sample. It is shown that the differential scanning calorimetry (DSC)‐determined gelation enthalpies could not be correlated with gelator and solvent clogP values. Spectroscopic results show that intermolecular hydrogen‐bonding between the oxalamide units provides the major and self‐assembly directing intermolecular interaction in the aggregates. Molecular modeling studies reveal that molecular flexibility of gelators due to the presence of the polymethylene bridges gives three conformations ( zz , p1 , and p2 ) close in energy, which could form oxalamide hydrogen‐bonded layers. The aggregates of the p1 and p2 conformations tend to twist due to steric repulsion between neighboring iBu groups at chiral centers. The X‐ray powder diffraction (XRPD) results of 1₆Me and 1₉Me xerogels prove the formation of p1 and p2 gel aggregates, respectively. The latter results explain the formation of gel aggregates with chiral morphology and also the simultaneous presence of aggregates of diverse morphology in the same gel system.     

Dynamic Formation of Hybrid Peptidic Capsules by Chiral Self‐Sorting and Self‐Assembly

Owing to their versatility and biocompatibility, peptide‐based self‐assembled structures constitute valuable targets for complex functional designs. It is now shown that artificial capsules based on β‐barrel binding motifs can be obtained by means of dynamic covalent chemistry (DCC) and self‐assembly. Short peptides (up to tetrapeptides) are reversibly attached to resorcinarene scaffolds. Peptidic capsules are thus selectively formed in either a heterochiral or a homochiral way by simultaneous and spontaneous processes, involving chiral sorting, tautomerization, diastereoselective induction of inherent chirality, and chiral self‐assembly. Self‐assembly is shown to direct the regioselectivity of reversible chemical reactions. It is also responsible for shifting the tautomeric equilibrium for one of the homochiral capsules. Two different tautomers (keto‐enamine hemisphere and enol‐imine hemisphere) are observed in this capsule, allowing the structure to adapt for self‐assembly.     

N,N′‐Methylenediimidazolium Salts: From Self‐Assembly to an Efficient DNAse Protection System

We have developed N,N′‐dialkylmethylenediimidazolium salts ([C_nC_nDIM][X]₂) that self‐organize into multilayered cationic vesicles and can interact with DNA. These preorganized systems form complexes with linear DNA and protect it from DNase I cleavage.