Nanotube Friendly Poly(N‐isopropylacrylamide)

Poly(N‐ispropylacrylamide) [PNIPAM] is a widely studied polymer for use in biological applications due to its lower critical solution temperature (LCST) being so close to the human body temperature. Unfortunately, attempts to combine carbon nanotubes (CNTs) with PNIPAM have been unsuccessful due to poor interactions between these two materials. In this work, a PNIPAM copolymer with 1 mol‐% pyrene side group [p‐PNIPAM] was used to produce a thermoresponsive polymer capable of stabilizing both single and multi‐walled carbon nanotubes (MWNTs) in water. The presence of pyrene in the polymer chain lowers the LCST less than 4 °C and the interaction with nanotubes does not show any influence on LCST. Moreover, p‐PNIPAM stabilized nanotubes show a temperature‐dependent dispersion in water that allows the level of nanotube exfoliation/bundling to be controlled. Cryo‐TEM images, turbidity, and viscosity of these suspensions were used to characterize these thermoresponsive changes. This ability to manipulate the dispersion state of CNTs in water with p‐PNIPAM will likely benefit many biological applications, such as drug delivery, optical sensors, and hydrogels.

     

Molecular Characteristics of Poly(N‐isopropylacrylamide) Separated from Nanocomposite Gels by Removal of Clay from the Polymer/Clay Network

The extraordinary mechanical and swelling/deswelling properties of nanocomposite (NC) gels are attributed to their unique organic (polymer)/inorganic (clay) network structure. In this study, poly(N‐isopropylacrylamide) (PNIPA) was successfully separated from an NC gel network by decomposing the clay (hectorite) using hydrofluoric acid (HF). A very low HF concentration (0.2 wt.‐%) was adequate for the decomposition of the clay without causing any damage to PNIPA. The separated PNIPA had a high (=5.5 × 10⁶ g · mol⁻¹). Also, was almost constant regardless of the clay concentration (C_clay = 1–25 × 10⁻² mol · l⁻¹), even though the properties of the NC gel varied widely over this C_clay range. Comparisons of NC gels, PNIPA, and SiO₂‐NC gels indicated that the clay platelets specifically play an important role in NC gels.

     

Preparation and properties of poly(N‐isopropylacrylamide)/poly(N‐isopropylacrylamide) interpenetrating polymer networks for drug delivery

A novel poly(N‐isopropylacrylamide) (PNIPA)/PNIPA interpenetrating polymer network (IPN) was synthesized and characterized. In comparison with conventional PNIPA hydrogels, the shrinking rate of the IPN hydrogel increased when gels, swollen at 20 °C, were immersed in 50 °C water. The phase‐transition temperature of the IPN gel remained unchangeable because of the same chemical constituent in the PNIPA gel. The reswelling kinetics were slower than those of the PNIPA hydrogel because of the higher crosslinking density of the IPN hydrogel. The IPN hydrogel had better mechanical strength because of its higher crosslinking density and polymer volume fraction. The release behavior of 5‐fluorouracil (5‐Fu) from the IPN hydrogel showed that, at a lower temperature, the release of 5‐Fu was controlled by the diffusion of water molecules in the gel network. At a higher temperature, 5‐Fu inside the gel could not diffuse into the medium after a burst release caused by the release of the drug on the surface of the gel. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1249–1254, 2004     

Novel temperature‐ and pH‐responsive graft copolymers composed of poly(L‐glutamic acid) and poly(N‐isopropylacrylamide)

A series of novel temperature‐ and pH‐responsive graft copolymers, poly(L ‐glutamic acid)‐g‐poly(N‐isopropylacrylamide), were synthesized by coupling amino‐semitelechelic poly(N‐isopropylacrylamide) with N‐hydroxysuccinimide‐activated poly(L ‐glutamic acid). The graft copolymers and their precursors were characterized, by ESI‐FTICR Mass Spectrum, intrinsic viscosity measurements and proton nuclear magnetic resonance (¹H NMR). The phase‐transition and aggregation behaviors of the graft copolymers in aqueous solutions were investigated by the turbidity measurements and dynamic laser scattering. The solution behavior of the copolymers showed dependence on both temperature and pH. The cloud point (CP) of the copolymer solution at pH 5.0–7.4 was slightly higher than that of the solution of the PNIPAM homopolymer because of the hydrophilic nature of the poly(glutamic acid) (PGA) backbone. The CP markedly decreased when the pH was lowered from 5 to 4.2, caused by the decrease in hydrophilicity of the PGA backbone. At a temperature above the lower critical solution temperature of the PNIPAM chain, the copolymers formed amphiphilic core‐shell aggregates at pH 4.5–7.4 and the particle size was reduced with decreasing pH. In contrast, larger hydrophobic aggregates were formed at pH 4.2. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4140–4150, 2008     

Rapid and controlled deswelling of porous poly(N‐isopropylacrylamide) hydrogels prepared by the templating of interpenetrated nanoporous silica particles

Free radical polymerization of N‐isopropylacrylamide (NIPAAm) and crosslinker solutions, which were fulfilled in silica particles with an interpenetrated and nanometer‐sized porous structure (a diameter of 3 mm and mean pore sizes of 15, 30, and 50 nm), fabricated hybrids of organic hydrogels and inorganic silica. Differential scanning calorimetric analyses of the hybrids revealed that silica components affected the thermoresponsive properties of polyNIPAAm hydrogels. Porous polyNIPAAm hydrogels were prepared by the subsequent acid treatment of the hybrids to remove silica. Transmission Fourier transformed infrared spectra indicated the selective extraction of silica. Scanning electron microscopic observation of the hydrogels confirmed the porous structure. The deswelling rate of porous hydrogels was 7 times larger than that of conventional hydrogels and increased with increasing the pore size of silica used. However, the swelling was not affected by the pore formation. The thermoresponsiveness of porous polyNIPAAm hydrogels could be regulated by the pore size. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3542–3547, 2002     

Hydration‐mediated effects of saccharide stereochemistry on poly(N‐isopropylacrylamide) gel swelling

To shed new light on the mechanisms of saccharide stereochemistry effect on macromolecules in aqueous solutions, we studied the effect of three monosaccharide stereoisomers, glucose, galactose, and mannose, on the swelling of Poly(N‐isopropylacrylamide) (PNIPA) hydrogels. We equilibrated PNIPA hydrogels in sugar solutions of different concentrations at 25 °C, and determined gel volume and mass swelling ratios, and sugar concentration imbalance. The volume‐phase‐transition occurred at molal concentrations of 0.587 ± 0.004 (galactose), 0.724 ± 0.003 (glucose), and 0.846 ± 0.004 (mannose). The same order of sugars emerged for the gel‐swelling and the magnitude of the sugar concentration‐imbalance, which correlated with sugar isentropic molar compressibility and hydration number. The more hydrated the sugar, the worse a cosolvent it is for the polymer, hence the larger the deswelling and the more negative the sugar concentration imbalance. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Single‐Chain‐Particles of Poly(N‐isopropylacrylamide)

Spherical single‐chain‐particles of poly(N‐isopropylacrylamide) were prepared in aqueous solution above the lower critical solution temperature upon the addition of sodium dodecyl sulfate. The size of the single‐chain‐particles was investigated by means of transmission electron microscopy and viscosity measurements of the corresponding solutions, indicating the absence of inter‐chain entanglements among the single‐chain‐particles.

Schematic of the preparation of PNIPAM single‐chain‐globules in solution.     

Formation of a Polypseudorotaxane via Self‐Assembly of γ‐Cyclodextrin with Poly(N‐isopropylacrylamide)

A polypseudorotaxane (PPR) comprising γ‐cyclodextrin (γ‐CD) as host molecules and poly(N‐isopropylacrylamide) (PNIPAM) as a guest polymer is prepared via self‐assembly in aqueous solution. Due to the bulky pendant isopropylamide group, PNIPAM exhibits size‐selectivity toward self‐assembly with α‐, β‐, and γ‐CDs. It can fit into the cavity of γ‐CD to give rise to a PPR, but cannot pass through α‐CD and β‐CD under the same conditions. The ratio of the number of γ‐CD molecules to entrapped NIPAM repeat units is kept at 1:2.2 or 1:2.4, determined by ¹H NMR spectroscopy and TGA analysis, respectively, indicating that there are more than 2 but less than 3 NIPAM repeat units included by one γ‐CD molecule. This finding opens new avenues to PPR‐based supramolecular polymers to be used as solid, stimuli‐responsive materials.     

Mesoporous Silica Particles as Topologically Crosslinking Fillers for Poly(N‐isopropylacrylamide) Hydrogels

Here it is demonstrated that mesoporous silicas (MPSs) can be used as effective “topological crosslinkers” for poly(N‐isopropylacrylamide) (PNIPA) hydrogels to improve the mechanical property. Three‐dimensional bicontinuous mesporous silica is found to effectively reinforce the PNIPA hydrogels, as compared to nonporous silica and two‐dimensional hexagonally ordered mesoporous silica.     

Robust Poly(allylamine)‐graft‐poly(N‐isopropylacrylamide) Particles Prepared by Physical Crosslinking with Poly(styrene sulfonate)

Summary: Robust thermosensitive PAH‐g‐PNIPAAm/PSS particles were prepared by addition of a poly(allylamine)‐graft‐poly(N‐isopropylacrylamide) particle suspension into poly(styrene sulfonate) solution above the LCST of PAH‐g‐PNIPAAm. Scanning force microscopy revealed stable and well‐separated particles in water at room temperature. The zeta‐potential showed a negative surface charge of the particles. Their thermosensitive behavior was demonstrated by dynamic light scattering. The release of rhodamine 6G loaded particles could respond to the incubation temperature.

Fabrication of thermosensitive and robust particle by suspension of in situ formed PAH‐g‐PNIPAAm particle above the LCST in PSS solution.     

From poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N‐isopropylacrylamide) triblock copolymer to poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide) hydrogels: Synthesis and rapid deswelling and reswelling behavior of hydrogels

Poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N‐isopropylacrylamide) (PNIPAAm‐b‐PEO‐b‐PNIPAAm) triblock copolymer was synthesized via the reversible addition‐fragmentation chain transfer/macromolecular design via the interchange of xanthate (RAFT/MADIX) process with xanthate‐terminated poly(ethylene oxide) (PEO) as the macromolecular chain transfer agent. The successful synthesis of the ABA triblock copolymer inspired the preparation of poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide) (PNIPAAm‐b‐PEO) copolymer networks with N,N′‐methylenebisacrylamide as the crosslinking agent with the similar approach. With the RAFT/MADIX process, PEO chains were successfully blocked into poly(N‐isopropylacrylamide) (PNIPAAm) networks. The unique architecture of PNIPAAm‐b‐PEO networks allows investigating the effect of the blocked PEO chains on the deswelling and reswelling behavior of PNIPAAm hydrogels. It was found that with the inclusion of PEO chains into the PNIPAAm networks as midblocks, the swelling ratios of the hydrogels were significantly enhanced. Furthermore, the PNIPAAm‐b‐PEO hydrogels displayed faster response to the external temperature changes than the control PNIPAAm hydrogel. The accelerated deswelling and reswelling behaviors have been interpreted based on the formation of PEO microdomains in the PNIPAAm networks, which could act as the hydrophilic tunnels to facilitate the diffusion of water molecules in the PNIPAAm networks. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Poly(N‐isopropylacrylamide)‐based comb‐type grafted hydrogel with rapid response to blood glucose concentration change at physiological temperature

A new type of glucose‐responsive hydrogel with rapid response to blood glucose concentration change at physiological temperature has been successfully developed. The polymeric hydrogel contains phenylboronic acid (PBA) groups as glucose sensors and thermo‐responsive poly (N‐isopropylacrylamide) (PNIPAM) groups as actuators. The response rate of the hydrogel to environmental glucose concentration change was significantly enhanced by introducing grafted poly(N‐isopropylacrylamide‐co‐3‐acrylamidophenylboronic acid) [poly(NIPAM‐co‐AAPBA)] side chains onto crosslinked poly(NIPAM‐co‐AAPBA) networks for the first time. The synthesized comb‐type grafted poly(NIPAM‐co‐AAPBA) hydrogels showed satisfactory equilibrium glucose‐responsive properties, and exhibited much faster response rate to glucose concentration change than normal type crosslinked poly(NIPAM‐co‐AAPBA) hydrogels at physiological temperature. Such glucose‐responsive hydrogels with rapid response rate are highly attractive in the fields of developing glucose‐responsive sensors and self‐regulated drug delivery systems. Copyright © 2008 John Wiley & Sons, Ltd.     

Recent development of temperature‐responsive cell culture surface using poly(N‐isopropylacrylamide)

Poly(N‐isopropylacrylamide) (PIPAAm), which is a well‐known temperature‐responsive polymer, is modified on substrates by various methods. At 37 °C, PIPAAm modified surface is hydrophobic and allows cells to adhere to and proliferate on the surface. By reducing temperature below the lower critical solution temperature of PIPAAm, the surface turns to hydrophilic and allows cells to detach themselves from the surface spontaneously. With this technology, cell sheet engineering is established several years ago. This review focuses on the preparations and characteristics of PIPAAm‐modified surfaces, and discusses the effect of surface properties on cell adhesion and deadhesion. In addition, the recent improvement of PIPAAm‐modified surfaces for cell culture and the clinical applications of cell sheets harvested from the surfaces are also mentioned. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 917–926     

Investigation of swelling,drug release and diffusion behaviors of poly(N‐isopropylacrylamide)/poly (N‐vinylpyrrolidone) full‐IPN hydrogels

The synthesis of sequential full interpenetrating polymer networks (IPNs) based on poly (N‐isopropylacrylamide) (PNIPAAm) and negatively charged poly(N‐vinyl‐2‐pyrrolidone) (PNVP) was described and their swelling, drug release, and diffusion studies were investigated. PNIPAAm was used as a host network. According to swelling experiments, IPNs gave relatively lower swelling ratios compared to PNIPAAm hydrogel due to the higher cross‐linking density. Lidocaine (LD) was used as a model drug for the investigation of drug release behavior of IPNs. LD uptake of the IPNs were found to increase from 24 to 166 (mg LD / g dry gel) with increasing amount of PNIPAAm and AMPS contents in the IPN structure. It was observed that the specific interaction between drug and AMPS co‐monomer influenced the drug release profile. In the diffusion transport mechanism study in water, the results indicated that the swelling exponents n for all IPNs are in the range from 0.50 to 0.72. This implies that the swelling transport mechanism was transferred from Fickian to non‐Fickian transport, with increasing AMPS content and NIPAAm character in the IPN structure. In addition, diffusion of LD within the IPNs showed similar trend. The incorporation of AMPS leads to an increase in electrostatic interaction between charge sites on carboxylate ions and cationic LD molecules. Therefore, the highest diffusion coefficient (D) of drug was found for IPN2 sample. Copyright © 2007 John Wiley & Sons, Ltd.     

The incorporation of carboxylate groups into temperature‐responsive poly(N‐isopropylacrylamide)‐based hydrogels promotes rapid gel shrinking

Aqueous gel deswelling rates for copolymer hydrogels comprising N‐isopropylacrylamide (IPAAm) and 2‐carboxyisopropylacrylamide (CIPAAm) in response to increasing temperatures were investigated. Compared with pure IPAAm‐based gels, IPAAm–CIPAAm gels shrink very rapidly in response to small temperature increases across their lower critical solution temperature (their volume is reduced by five‐sixths within 60 s). Shrinking rates for these hydrogels increase with increasing CIPAAm content. In contrast, structurally analogous IPAAm–acrylic acid (AAc) copolymer gels lose their temperature sensitivity with the introduction of only a few mole percent of AAc. Additionally, deswelling rates of IPAAm–AAc gels decrease with increasing AAc content. These results indicate that IPAAm–CIPAAm copolymer gels behave distinctly from IPAAm–AAc systems even if both comonomers, CIPAAm and AAc, possess carboxylic acid groups. Thus, we propose that the sensitive deswelling behavior for IPAAm–CIPAAm gels results from strong hydrophobic chain aggregation maintained between network polymer chains due to the similar chemical structures of CIPAAm and IPAAm. This structural homology facilitates aggregation of chain isopropylamide groups for both IPAAm and CIPAAm sequences with increasing temperature. The incorporation of AAc, however, shows no structural homology to IPAAm, inhibiting chain aggregation and limiting collapse. A functionalized temperature‐sensitive poly(N‐isopropylacrylamide) hydrogel containing carboxylic acid groups is possible with CIPAAm, producing rapid and large volume changes in response to smaller temperature changes. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 335–342, 2001     

Photoluminescent Toroids Formed by Temperature‐Driven Self‐Assembly of Rhodamine B End‐Capped Poly(N‐isopropylacrylamide)

In this paper, self‐assembled polymeric toroids formed by a temperature‐driven process are reported. Rhodamine B (RhB) end‐capped poly(N‐isopropylacrylamide) (PNIPAAm) demonstrating a lower critical solution temperature (LCST) is prepared. In a two‐phase system, the polymer in the aqueous phase could move to the chloroform phase on raising the temperature above its LCST. This temperature‐driven process results in the formation of polymeric toroids in the chloroform phase, and the strategy affords a new pathway to toroidal self‐assembly of polymers. Moreover, the photoluminescent behavior of the RhB end‐capped PNIPAAm species formed by the process is also studied and discussed.

     

Investigation of drug release from thermo‐ and pH‐sensitive poly(N‐isopropylacrylamide/itaconic acid) copolymeric hydrogels

N‐Isopropylacrylamide/itaconic acid copolymeric hydrogels were prepared by irradiation of the ternary mixtures of N‐isopropylacrylamide/itaconic acid/water by γ‐rays at ambient temperature. The dependence of swelling properties and phase transitions on the comonomer concentration and temperature were investigated. The hydrogels showed both temperature and pH responses. The effect of comonomer concentration on the uptake and release behavior of the hydrogels was studied. Methylene blue (MB) was used as a model drug for the investigation of drug uptake and release behavior of the hydrogels. The release studies showed that the basic parameters affecting the drug release behavior of the hydrogels were pH and temperature of the solution. Copyright © 2004 John Wiley & Sons, Ltd.     

Living anionic polymerization of N‐methoxymethyl‐N‐isopropylacrylamide: Synthesis of well‐defined poly(N‐isopropylacrylamide) having various stereoregularity

Anionic polymerization of N‐methoxymethyl‐N‐isopropylacrylamide ( 1 ) was carried out with 1,1‐diphenyl‐3‐methylpentyllithium and diphenylmethyllithium, ‐potassium, and ‐cesium in THF at ?78 °C for 2 h in the presence of Et₂Zn. The poly( 1 )s were quantitatively obtained and possessed the predicted molecular weights based on the feed molar ratios between monomer to initiators and narrow molecular weight distributions (M_w/M_n = 1.1). The living character of propagating carbanion of poly( 1 ) either at 0 or ?78 °C was confirmed by the quantitative efficiency of the sequential block copolymerization using N,N‐diethylacrylamide as a second monomer. The methoxymethyl group of the resulting poly( 1 ) was completely removed to give a well‐defined poly(N‐isopropylacrylamide), poly(NIPAM), via the acidic hydrolysis. The racemo diad contents in the poly(NIPAM)s could be widely changed from 15 to 83% by choosing the initiator systems for 1 . The poly(NIPAM)s obtained with Li⁺/Et₂Zn initiator system possessed syndiotactic‐rich configurations (r = 75–83%), while either atactic (r = 50%) or isotactic poly(NIPAM) (r = 15–22%) was generated with K⁺/Et₂Zn or Li⁺/LiCl initiator system, respectively. Atactic and syndiotactic poly(NIPAM)s (42 < r < 83%) were water‐soluble, whereas isotactic‐rich one (r < 31%) was insoluble in water. The cloud points of the aqueous solution of poly(NIPAM)s increased from 32 to 37 °C with the r‐contents. These indicated the significant effect of stereoregularity of the poly(NIPAM) on the water‐solubility and the cloud point in water © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4832–4845, 2006     

Thermoresponsive Poly(N‐isopropylacrylamide)‐Based Block Copolymer Coating for Optimizing Cell Sheet Fabrication

Thermoresponsive surfaces are prepared via a spin‐coating method with a block copolymer consisting of poly(N‐isopropylacrylamide) (PIPAAm) and poly(butyl methacrylate) (PBMA) on polystyrene surfaces. The PBMA block suppresses the removal of deposited PIPAAm‐based polymers from the surface. The polymer coating affects the temperature‐dependent cellular behavior of the surfaces with respect to protein adsorption. By adjusting layer thicknesses, PBMA‐b‐PIPAAm‐coated surfaces are optimized to regulate the adhesion/detachment of cells by temperature changes. Thus, thermoresponsive polymer‐coated surfaces are able to harvest contiguous cell sheets with their basal extracellular matrix proteins.