Palladium Nanoparticles Supported on a Porous Organic Polymer: An Efficient Catalyst for Suzuki‐Miyaura and Sonogashira Coupling Reactions

A new porous organic polymer (POP) with high thermal stability and large surface area has been synthesized and applied in the preparation of Pd/POP catalyst. Pd/POP was characterized by XRD, TGA, SEM and TEM. The catalyst consists of highly dispersed palladium nanoparticles of 0.9–4 nm size on POP with a large surface area of 650 m²/g. It presents high catalytic activity for Suzuki‐Miyaura and Sonogashira reactions. The catalyst was reusable for three to five times without significant loss of activity.     

Carbonyl‐Grafted g‐C3N4 Porous Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Carbonyl‐grafted g‐C₃N₄ porous nanosheets (COCNPNS) were fabricated by means of a two‐step thermal process using melamine and oxalic acid as starting reagents. The combination of melamine with oxalic acid to form a melamine–oxalic acid supramolecule as a precursor is key to synthesizing carbonyl‐grafted g‐C₃N₄. The bulk carbonyl‐grafted g‐C₃N₄ (COCN) was further thermally etched onto porous nanosheets by O₂ under air. In such a process, the carbonyl groups were partly removed and the obtained sample showed remarkably enhanced visible‐light harvesting and promoted the separation and transfer of photogenerated electrons and holes. With its unique porous structure and enhanced light‐harvesting capability, under visible‐light illumination (λ >420 nm) the prepared COCNPNS exhibited a superior photocatalytic hydrogen evolution rate of 83.6 μmol h⁻¹, which is 26 times that of the p‐CN obtained directly from thermal polycondensation of melamine.     

Prefunctionalized Porous Organic Polymers: Effective Supports of Surface Palladium Nanoparticles for the Enhancement of Catalytic Performances in Dehalogenation

Three porous organic polymers (POPs) containing H, COOMe, and COO^? groups at 2,6‐bis(1,2,3‐triazol‐4‐yl)pyridyl (BTP) units (i.e., POP‐1, POP‐2, and POP‐3, respectively) were prepared for the immobilization of metal nanoparticles (NPs). The ultrafine palladium NPs are uniformly encapsulated in the interior pores of POP‐1, whereas uniform‐ and dual‐distributed palladium NPs are located on the external surface of POP‐2 and POP‐3, respectively. The presence of carboxylate groups not only endows POP‐3 an outstanding dispersibility in H₂O/EtOH, but also enables the palladium NPs at the surface to show the highest catalytic activity, stability, and recyclability in dehalogenation reactions of chlorobenzene at 25 °C. The palladium NPs on the external surface are effectively stabilized by the functionalized POPs containing BTP units and carboxylate groups, which provides a new insight for highly efficient catalytic systems based on surface metal NPs of porous materials.     

杂多酸盐在Raney Ni和Raney Co表面上的状态

采用XPS表面分析技术研究了Cu3/2PMo12O40改性Raney Ni和Raney Co的表面状态,结果表明,Raney Ni和Raney Co表面上的Cu3/2PMo12O40分子中的Cu2＋和Mo6＋发生了很大变化,Cu2＋被还原为Cu0,而Mo6＋被部分还原为Mo5＋和Mo4＋.这些变化可归因于Raney Ni和Raney Co在制备过程中表面吸附的活泼氢所致.由于Raney Ni表面吸附的氢比Raney Co表面吸附的氢的活性高,使得Raney Ni表面的Mo6＋被还原到Mo5＋和Mo4＋的量多.混合价态Mo的存在提高了羰基在催化剂表面吸附和活化的能力,同时Cu0的存在有助于羰基的加氢反应.所以,混合价态的Mo和Cu0对羰基加氢起着协同的作用.     

Tailoring CuO nanostructures for enhanced photocatalytic property

Composites of cobalt (hydr)oxide and graphite oxide (GO) were obtained and evaluated as adsorbents of hydrogen sulfide at ambient conditions. The surface properties of the initial and exhausted samples were studied by FTIR, TEM, SEM/EDX, XRD, adsorption of nitrogen, potentiometric titration, and thermal analysis. The results obtained show a significant improvement in their adsorption capacities compared to parent compounds. The importance of the OH groups of cobalt (hydr)oxide/GO composites and new interface chemistry for the adsorption of hydrogen sulfide on these materials is revealed. The oxygen activation by the carbonaceous component resulted in formation of sulfites. Water enhanced the removal process. This is the result of the basic environment promoting dissociation of H(2)S and acid-base reactions. Finally, the differences in the performance of the materials with different mass ratios of GO were linked to the availability of active sites on the surface of the adsorbents, dispersion of these sites, their chemical heterogeneity, and location in the pore system.     

Ordered Porous Nitrogen‐Doped Carbon Matrix with Atomically Dispersed Cobalt Sites as an Efficient Catalyst for Dehydrogenation and Transfer Hydrogenation of N‐Heterocycles

Single‐atom catalysts (SACs) have been explored widely as potential substitutes for homogeneous catalysts. Isolated cobalt single‐atom sites were stabilized on an ordered porous nitrogen‐doped carbon matrix (ISAS‐Co/OPNC). ISAS‐Co/OPNC is a highly efficient catalyst for acceptorless dehydrogenation of N‐heterocycles to release H₂. ISAS‐Co/OPNC also exhibits excellent catalytic activity for the reverse transfer hydrogenation (or hydrogenation) of N‐heterocycles to store H₂, using formic acid or external hydrogen as a hydrogen source. The catalytic performance of ISAS‐Co/OPNC in both reactions surpasses previously reported homogeneous and heterogeneous precious‐metal catalysts. The reaction mechanisms are systematically investigated using first‐principles calculations and it is suggested that the Eley–Rideal mechanism is dominant.     

MnFe2O4 Nanocrystals Wrapped in a Porous Organic Polymer: A Designed Architecture for Water‐Splitting Photocatalysis

A novel MnFe₂O₄–porous organic polymer (POP) nanocomposite was synthesized by a facile hydrothermal method and using the highly cross‐linked N‐rich benzene–benzylamine POP. The nanocomposite presented highly efficient photocatalytic performance in the hydrogen evolution reaction (HER) from pure water without addition of any sacrificial agent under one AM 1.5 G sunlight illumination. A photocatalytic activity of 6.12 mmol h^?1 g^?1 was achieved in the absence of any noble metal cocatalyst, which is the highest H₂ production rate reported for nonprecious metal catalysts. The photocatalytic performance of MnFe₂O₄‐POP could be attributed to the intrinsic synergistic effects of manganese ferrite (MnFe₂O₄) nanoclusters interacting with the nitrogen dopant POP with a unique mesoporous nanoarchitecture and spatially confined growth of MnFe₂O₄ in the interconnected POP network, leading to high visible‐light absorption with fast electron transport.     

A Three‐Dimensional Porous Organic Semiconductor Based on Fully sp2‐Hybridized Graphitic Polymer

Dimensionality plays an important role in the charge transport properties of organic semiconductors. Although three‐dimensional semiconductors, such as Si, are common in inorganic materials, imparting electrical conductivity to covalent three‐dimensional organic polymers is challenging. Now, the synthesis of a three‐dimensional π‐conjugated porous organic polymer (3D p‐POP) using catalyst‐free Diels–Alder cycloaddition polymerization followed by acid‐promoted aromatization is presented. With a surface area of 801 m² g^?1, full conjugation throughout the carbon backbone, and an electrical conductivity of 6(2)×10^?4 S cm^?1 upon treatment with I₂ vapor, the 3D p‐POP is the first member of a new class of permanently porous 3D organic semiconductors.     

The Coordination Structure of the Extracted Cobalt(II) Complex with a Synergistic Mixture Containing Lix63 and Versatic10

In the present work, the cobalt(II ) synergist complex with isobutyric acid (HL^I ) and 5‐hydroxy‐4‐octanone oxime (HB^I ), which were the corresponding short‐chain analogs of active synergistic mixture of Versatic10 (HL ) and Lix63 (5,8‐diethyl‐7‐hydroxy‐6‐dodecanoneoxime, HB ), was prepared and studied by X‐ray single‐crystal diffraction. The crystal structure of the cobalt(II ) synergistic complex showed that the composition of the complex was Co(HB^I )₂(L^I )₂ with a cis‐form octahedron geometry structure. Both intra and intermolecular hydrogen bonding between the uncoordinated carbonyl oxygen atom of the deprotonated monodentate anionic ligand L^I and the hydrogen atom of the α‐hydroxy or the oxime hydroxyl group of HB^I were observed in the crystal lattice. In order to bridge the gap between the solid‐state structure of the cobalt(II ) synergist complex and the solution structure of the extracted cobalt(II ) complex with the actual synergistic mixture containing Versatic10 and Lix63 in the nonpolar organic phase, both the cobalt(II ) synergistic complex and the extracted cobalt(II ) complex were further investigated by Fourier transform infrared spectroscopy (FT‐IR ) and electrospray ionization mass spectrometry (ESI‐MS ). The results indicated that the extracted cobalt(II ) complex in the nonpolar organic phase might possess a similar coordination structure as that of the cobalt(II ) synergist complex.     

In Situ Synthesis of AIEgen-based Porous Organic Polymer Films by Interfacial Amino-yne Click Polymerization for Efficient Light-Harvesting

We developed a catalyst-free, atom-economical interfacial amino-yne click polymerization to in situ synthesize new aggregation-induced emission luminogen (AIEgen)-based free-standing porous organic polymer films at room temperature. The crystalline properties of POP films were confirmed by powder X-ray diffraction and high-resolution transmission electron microscopy. The good porosity of these POP films was proved by their N₂ uptake experiments. The thickness of POP films can be easily regulated from 16 nm to ≈1 μm by adjusting monomer concentration. More importantly, these AIEgen-based POP films show bright luminescence with high absolute photoluminescent quantum yields up to 37.8 % and good chemical and thermal stability. The AIEgen-based POP film can encapsulate an organic dye (e.g., Nile red) to further form an artificial light-harvesting system with a large red-shift (Δλ=141 nm), highly efficient energy-transfer ability (Φ_ET=91 %), and high antenna effect (11.3).     

Structural Transformation of Surface-Confined Porphyrin Networks by Addition of Co Atoms

The self-assembly of a nickel-porphyrin derivative (Ni-DPPyP) containing two pyridyl coordinating sites and two pentyl chains at trans meso positions was studied with scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and low energy electron diffraction (LEED) on Au(111). Deposition of Ni-DPPyP onto Au(111) gave rise to a close-packed network for coverages smaller or equal to one monolayer as revealed by STM and LEED. The molecular arrangement of this two-dimensional network is stabilized via hydrogen bonds formed between the pyridyl's nitrogen and hydrogen atoms from the pyrrole groups of neighboring molecules. Subsequent deposition of cobalt atoms onto the close-packed network and post-deposition annealing at 423 K led to the formation of a Co-coordinated hexagonal porous network. As confirmed by XPS measurements, the porous network is stabilized by metal-ligand interactions between one cobalt atom and three pyridyl ligands, each pyridyl ligand coming from a different Ni-DPPyP molecule.     

Cobalt Hydroxide Nanosheets and Their Thermal Decomposition to Cobalt Oxide Nanorings

We demonstrate herein that single‐crystalline β‐cobalt hydroxide (β‐Co(OH)₂) nanosheets can be successfully synthesized in large quantities by a facile hydrothermal synthetic method with aqueous cobalt nitrate as the cobalt source and triethylamine as both an alkaline and a complexing reagent. This synthetic method has good prospects for the future large‐scale production of single‐crystalline β‐Co(OH)₂ nanosheets owing to its high yield, low cost, and simple reaction apparatus. Single‐crystalline porous nanosheets and nanorings of cobalt oxide (Co₃O₄) were obtained by a thermal‐decomposition method with single‐crystalline β‐Co(OH)₂ nanosheets as the precursor. A probable mechanism of formation of β‐Co(OH)₂ nanosheets, porous Co₃O₄ nanosheets, and Co₃O₄ nanorings was proposed on the basis of the experimental results.     

UV-to-NIR Harvesting Conjugated Porous Polymer Nanocomposite: Upconversion and Plasmon Expedited Thioether Photooxidation

Photocatalysts capable of harvesting a broad range of the solar spectrum are essential for sustainable chemical transformations and environmental remediation. Herein, we have integrated NIR-absorbing upconversion nanoparticles (UCNP) with UV-Vis absorbing conjugated porous organic polymer (POP) through the in situ multicomponent C−C coupling to fabricate a UC−POP nanocomposite. The light-harvesting ability of UC−POP is further augmented by loading plasmonic gold nanoparticles (AuNP) into UC−POP. A three-times enhancement in the upconversion luminescence is observed upon the incorporation of AuNP in UC−POP, subsequently boosting the photocatalytic activity of UC−POP−Au. The spectroscopic and photoelectrochemical investigations infer the enhanced photocatalytic oxidation of thioethers, including mustard gas simulant by UC−POP−Au compared to POP and UC−POP due to the facile electron-hole pair generation, suppressed exciton recombination, and efficient charge carrier migration. Thus, the unique design strategy of combining plasmonic and upconversion nanoparticles with a conjugated porous organic polymer opens up new vistas towards artificial light harvesting.     

Cooperative Capture of Uranyl Ions by a Carbonyl‐Bearing Hierarchical‐Porous Cu–Organic Framework

To efficiently capture the toxic uranyl ions (UO₂²⁺), a new hierarchical micro‐macroporous metal–organic framework was prepared under template‐free conditions, featuring interconnected multi‐nanocages bearing carbonyl groups derived from a semi‐rigid ligand. The material exhibits an unusually high UO₂²⁺ sorption capacity of 562 mg g^?1, which occurs in an intriguing two‐steps process, on the macropore‐based crystal surface and in the inner nanocages. Notably, the latter is attributed to the cooperative interplay of the shrinkage of the host porous framework induced by uranyl accommodation and the free carbonyl coordination sites, as shown by both single‐crystal X‐ray diffraction and a red‐shift of the infrared [O=U^VI=O]²⁺ antisymmetric vibration band.     

Discovery of Highly Selective Alkyne Semihydrogenation Catalysts Based on First‐Row Transition‐Metallated Porous Organic Polymers

Five different first‐row transition metal precursors (V^III, Cr^III, Mn^II, Co^II, Ni^II) were successfully incorporated into a catechol porous organic polymer (POP) and characterized using ATR‐IR and XAS analysis. The resulting metallated POPs were then evaluated for catalytic alkyne hydrogenation using high‐throughput screening techniques. All POPs were unexpectedly found to be active and selective catalysts for alkyne semihydrogenation. Three of the metallated POPs (V, Cr, Mn) are the first of their kind to be active single‐site hydrogenation catalysts. These results highlight the advantages of using a POP platform to develop new catalysts which are otherwise difficult to achieve through traditional heterogeneous and homogeneous routes.     

A Triptycene-Based Porous Organic Polymer that Exhibited High Hydrogen and Carbon Dioxide Storage Capacities and Excellent CO2/N2 Selectivity

A novel porous organic polymer (POP) has been constructed through the condensation of triptycene tricatechol and 1,3,5‐benzenetris(4‐phenylboronic acid). This triptycene‐based POP exhibited high H₂ uptake (up to 1.84 wt% at 77 K, 1 bar), large CO₂ adsorption capacity (up to 18.1 wt% at 273K, 1 bar), and excellent CO₂/N₂ adsorption selectivity (up to 120/1). The influence of solvent on the gas adsorption performance of the POP has also been investigated.     

Alkene Isomerization–Hydroarylation Tandem Catalysis: Indole C2‐Alkylation with Aryl‐Substituted Alkenes Leading to 1,1‐Diarylalkanes

A cobalt‐N‐heterocyclic carbene catalyst generated from CoBr₂, imidazolium salt, and cyclohexylmagnesium bromide was found to promote the imine‐directed C2‐alkylation of indoles with nonconjugated arylalkenes through a tandem alkene isomerization–hydroarylation process, affording 1,1‐diarylalkanes with exclusive regioselectivity. The feasibility of the tandem catalysis was demonstrated for allyl‐, homoallyl‐, and bishomoallylbenzene derivatives. The catalytic system is also applicable to a variety of β‐substituted styrene derivatives. Mechanistic experiments using deuterium‐labeled indole substrate and Grignard reagent provided insight into the cobalt‐mediated C? H activation step, which likely involves exchange of the C2‐hydrogen atom of the former and the β‐hydrogen atoms of the latter.     

Cobalt nanoparticles anchored to porous silicon as a novel modifier for the construction of enzyme‐free hydrogen peroxide screen‐printed sensor

In this work, a screen‐printed carbon electrode (SPCE) was modified with a cobalt/porous silicon (Co@PSi) nanocomposite powder to develop a nonenzymatic sensor for the detection of hydrogen peroxide. The Co@PSi nanocomposite was synthesized through the chemical reaction between silicon powder in a HF/HNO₃ solution and cobalt cations. In this process, cobalt nanoparticles were anchored on the porous silicon. The structure and morphology of the synthesized nanocomposite were investigated by X‐ray diffraction, Fourier transform infrared spectroscopy, X‐ray photoemission spectroscopy, energy dispersive X‐ray spectroscopy, and field‐emission scanning electron microscopy. The constructed nonenzymatic, screen‐printed sensors based on the Co@PSi nanocomposite showed perfect electrocatalytic oxidation response to hydrogen peroxide over the range 1–170 and 170–3,770 μmol/L with the limit of detection of 0.8 μmol/L. In addition, the Co@PSi‐SPCE sensor exhibited good selectivity for the determination of H₂O₂ in the presence of common interfering species including glucose, ascorbic acid, uric acid, dopamine, nitrate, and nitrite ions. The constructed electrochemical sensor was successfully used for the determination of H₂O₂ in real samples.     

Hydrogen‐Bonded Organic Aromatic Frameworks for Ultralong Phosphorescence by Intralayer π–π Interactions

Ultralong organic phosphorescence (UOP) based on metal‐free porous materials is rarely reported owing to rapid nonradiative transition under ambient conditions. In this study, hydrogen‐bonded organic aromatic frameworks (HOAFs) with different pore sizes were constructed through strong intralayer π–π interactions to enable ultralong phosphorescence in metal‐free porous materials under ambient conditions for the first time. Impressively, yellow UOP with a lifetime of 79.8 ms observed for PhTCz‐1 lasted for several seconds upon ceasing the excitation. For PhTCz‐2 and PhTCz‐3, on account of oxygen‐dependent phosphorescence quenching, UOP could only be visualized in N₂, thus demonstrating the potential of phosphorescent porous materials for oxygen sensing. This result not only outlines a principle for the design of new HOFs with high thermal stability, but also expands the scope of metal‐free luminescent materials with the property of UOP.     

Thermal and infrared spectroscopic studies on hydrogen‐bonding interactions between poly‐(ε‐caprolactone) and some dihydric phenols

The effects of three dihydric phenols on the thermal properties of poly‐(ε‐caprolactone) (PCL) were investigated by DSC. The thermal properties of PCL were found to be greatly modified by the addition of 4,4′‐dihydroxydiphenyl ether (DHDPE). When the content of DHDPE reached 40%, PCL that was a semicrystalline polymer in the pure state changed to a fully amorphous elastomer. Fourier transform infrared (FTIR) spectroscopy was also applied to investigate the specific interaction between PCL and DHDPE. The formations of intermolecular hydrogen bonds between the carbonyl groups of PCL and the hydroxyl groups of DHDPE were discovered. By applying the Beer–Lambert law and a curve‐fitting program, the fractions of hydrogen‐bonded carbonyl groups were quantitatively analyzed. Although one DHDPE molecule had the potentiality to form two hydrogen bonds with PCL chains, the values of the fraction of the hydroxyl group involved in the intermolecular hydrogen bond were so little that from a statistical point of view, the formation of two hydrogen bonds was very difficult for every DHDPE molecule. Both DSC and FTIR revealed that 4,4′‐dihydroxydiphenyl methane and 4,4′‐dihydroxyphenyl had the ability to form hydrogen bonds with PCL, which were strongly affected by the polarity of the group linking two hydroxyphenyls and the flexibility of the molecular chain. The stronger the polarity of the group and the better the flexibility of molecular chain, the more tendencies dihydric phenol had to form intermolecular hydrogen bonds with PCL. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2108–2117, 2001