Control of the morphology of linear and cyclic PS-b-PI block copolymer micelles via PS addition

We have studied the effect of polystyrene (PS) homopolymer addition on the morphology of self-assembled block copolymer micelles made from linear or cyclic poly(styrene-b-isoprene), PS-b-PI, in a selective solvent for the PI block (heptane). Both copolymers have the same composition: the degree of polymerization is 290 for the PS block, and 110 for the PI block, and we focused on the influence of the addition of small amounts of PS homopolymer on the micellar morphology. For the copolymer concentrations considered, the linear copolymer self-organizes into spherical micelles while the cyclic copolymer forms cylindrical micelles. PS and PI chains constitute the core and the corona of these micelles, respectively, due to the different affinity of the blocks for heptane. Consequently, the PS homopolymer added is "solubilized" into the micellar core. Dynamic light scattering (DLS) data combined with atomic force microscopy (AFM) results show that the addition of PS homopolymer induces a drastic change in the micellar organization. Indeed, a morphological transition, from spheres to cylinders for the linear copolymer, and from cylinders to vesicles for the cyclic copolymer, is observed. These results highlight the fact that a small incorporation of PS homopolymer is clearly sufficient to modify the morphology (size and shape) of the micelles. This approach could be a key parameter for the design/control of micelles for specific applications in nanotechnology.     

End-to-end coupling and network formation behavior of cylindrical block copolymer micelles with a crystalline polyferrocenylsilane core

Cylindrical block copolymer micelles with a crystalline poly(ferrocenyldimethylsilane) (PFDMS) core and a long corona-forming block are known to elongate through an epitaxial growth mechanism on addition of further PFDMS block copolymer unimers. We now report that addition of the semicrystalline homopolymer PFDMS(28) to monodisperse short (ca. 200 nm), cylindrical seed micelles of PFDMS block copolymers results in the formation of aggregated structures by end-to-end coupling to form micelle networks. The resulting aggregates were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), and atomic force microscopy (AFM). In some cases, a core-thickening effect was also observed where the added homopolymer appeared to deposit and crystallize at the core-corona interface, which resulted in an increase of the width of the micelles within the networks. No evidence for aggregation was detected when the amorphous homopolymer poly(ferrocenylethylmethylsilane) (PFEMS(25)) was added to the cylindrical seed micelles whereas similar behavior to PFDMS(28) was noted for semicrystalline polyferrocenyldimethylgermane (PFDMG(30)). This suggested that the crystallinity of the added homopolymer is critical for subsequent end-to-end coupling and network formation to occur. We also explored the tendency of the cylindrical seed micelles to form aggregates by the addition of PI-b-PFDMS (PI = polyisoprene) block copolymers (block ratios 6:1, 3.8:1, 2:1, or 1:1), and striking differences were noted. The results ranged from typical micelle elongation, as reported in previous work, at high corona to core-forming block ratios (PI-b-PFDMS; 6:1) to predominantly end-to-end coupling at lower ratios (PI-b-PFDMS; 2:1, 1:1) to form long, essentially linear structures. The latter process, especially for the 2:1 block copolymer, led to much more controlled aggregate formation compared with that observed on addition of homopolymers.     

Influence of the macromolecular architecture on the self-assembly of amphiphilic copolymers based on poly(N,N-dimethylamino-2-ethyl methacrylate) and poly(epsilon-caprolactone)

The self-assembly of amphiphilic copolymers consisting of poly( N, N-dimethylamino-2-ethyl methacrylate) (PDMAEMA) and poly(-caprolactone) (PCL) segments arranged in graft and linear diblock architectures was investigated in this work by means of dynamic light scattering (DLS) in aqueous solution and by atomic force microscopy (AFM) on thin deposits. The solid-state deposits of the micelles were generated by a "freeze-drying" technique that preserves the initial micelle morphology in solution. A comparison between the morphological properties of graft copolymers with corresponding diblock copolymers was established to demonstrate the effect of the copolymer architecture on the micelle structure and organization.     

Micellar Behavior of Polystyrene-Poly(Ethylene Oxide) Diblock Copolymers in Aqueous Media: Effect of Copolymer Composition,Temperature, Salt,and Surfactants

Formation and structure of micelles from two amphiphilic polystyrene-block-poly(ethylene oxide) (PS-PEO) diblock copolymers (PS mol.wt. 1000; PEO mol.wt. 3000 and 5000) were examined by surface tension, viscosity, steady state fluorescence, dynamic light scattering (DLS), small angle neutron scattering (SANS), and cryo-transmission electron microscopy (cryo-TEM). The critical micelle concentration (CMC) of the copolymers in aqueous solution was ca. 0.05%; micelle hydrodynamic diameter was 30–35 nm with a narrow size distribution. SANS studies show that the copolymers form ellipsoidal micelles with semi major axis ～23 nm and semi minor axis ～8 nm. No significant change in the structure was found with temperature and presence of salt. The copolymer micelles interaction with the ionic surfactants sodium dodecyl sulphate (SDS) and dodecyltrimethylammonium bromide (DTAB) was also examined by DLS and SANS.     

Comb-coil型聚(苯乙烯-异戊二烯)共聚物在正烷烃中的自组装

借助动态光散射(DLS)和原子力显微镜(AFM)研究了具有复杂结构的comb-coil型聚苯乙烯-异戊二烯嵌段共聚物(S-graft-I)-block-S在聚异戊二烯(PI)选择性溶剂正烷烃中的自组装行为. 结果表明comb-coil型分子在庚烷中形成球形胶束. 同时, 这些胶束的尺寸显示出独特的双分布现象. 除常见的PS-PI相分离机理外, 我们还提出一种comb-coil相分离机理. 这些双分布胶束的形成可能正是两种相分离机理共存的结果. 此外, 借助透射电镜(TEM)进一步研究了选择性、接枝度和接枝链长度对自组装行为的影响. 研究发现增加溶剂选择性或增加接枝链链长以及接枝度, 有利于两种尺寸的胶束的形成以及对应分布峰的完全分离.     

Preparation and characterization of core-shell nanoparticles hardened by gamma-ray

Core-shell nanoparticles have been prepared by irradiation of gamma-ray on block copolymer micelles consisting of hydrophilic polyacrylic acid and hydrophobic polyisoprene with each 40 monomer units. The structure was determined by means of dynamic light scattering (DLS), small angle X-ray scattering (SAXS) and atomic force microscopy (AFM). The size distribution of the core-shell nanoparticles determined by DLS and AFM was very narrow. The average diameter of the particles decreased from 48 nm for the original micelles to 26 nm by the irradiation of 30 kGy. The core size determined by SAXS combined with DLS was roughly constant of 10 nm, irrespective of irradiation dose, whereas the shell thickness of the micelles was twice as large as the core size, and decreased with increasing irradiation dose.     

Synthesis of graft copolymer of ethyl cellulose through living polymerization and its self-assembly

Copolymers of ethyl cellulose (EC) with polystyrene (PSt) were synthesized through atom transfer radical polymerization (ATRP). The molecular weight of graft copolymers increased without any trace of the EC macro-initiator, and the polydispersity of the side chains was low. The molecular weight of the side chains increased with the monomer conversion. Kinetic study indicated that the polymerization was first order. The micelle characteristics of the graft copolymer in acetone were investigated using dynamic light scattering (DLS), atom force microscopy (AFM) and transmission electron microscopy (TEM). With increasing the concentration, micelles were gradually formed from the solution. The TEM and AFM images indicated that the micelles had spherical shape and showed core-shell structure.     

Morphological manipulation of ionic block copolymer micelles using an electric field

We present an electric-field-triggered sphere-to-cylinder transition of negatively charged block copolymer micelles with a radically low electric field of 30 V/cm. The system investigated is dilute solutions of strong polyelectrolyte containing ionic-b-neutral block copolymers (i.e., poly(styrenesulfonate-b-methylbutylene)). We have carried out in situ small-angle X-ray scattering experiments equipped with a dc power supply, combined with electron microscopy and atomic force microscopy. The application of small electrical fields across the solutions of spherical micelles results in the transient morphology of interconnected spheres, which are eventually transformed into a cylindrical shape with time. The E-field-induced cylindrical micelles revert to spherical micelles when the E field is switched off.     

Dynamic and static light scattering studies on self-aggregation behavior of biodegradable amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide) triblock copolymers in aqueous solution

The self-aggregation behavior of two amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide) (PEO-PHB-PEO) triblock copolymer samples with nearly identical PHB block lengths but different PEO block lengths, PEO-PHB-PEO(2000-810-2000) and PEO-PHB-PEO(5000-780-5000), was studied with dynamic and static light scattering (DLS and SLS), in combination with fluorescence spectroscopy and transmission electron microscopy (TEM). The formation of polymeric micelles by the two PEO-PHB-PEO triblock copolymers was confirmed with fluorescence technique and TEM. DLS analysis showed that the hydrodynamic radius (R(h)) of the monodistributed polymeric micelles increased with an increase in PEO block length. The relative thermostability of the triblock copolymer micelles was studied by SLS and DLS at different temperatures. The aggregation number and the ratio of the radius of gyration over hydrodynamic radius were found to be independent of temperature, probably due to the strong hydrophobicity of the PHB block. The combination of DLS and SLS studies indicated that the polymeric micelles were composed of a densely packed core of hydrophobic PHB blocks and a corona shell formed by hydrophilic PEO blocks. The aggregation numbers were found to be approximately 53 for PEO-PHB-PEO(2000-810-2000) micelles and approximately 37 for PEO-PHB-PEO(5000-780-5000) micelles. The morphology of PEO-PHB-PEO spherical micelles determined by DLS and SLS measurements was further confirmed by TEM.     

Synthesis of chiral micelles and nanoparticles from amino acid based monomers using RAFT polymerization

Homopolymers of ^tbutyl acrylate (P^tBuA) and a monosubstituted acrylamide (PAM) having an amino acid moiety in the side chain, N‐acryloyl‐(L )‐phenylalanine methyl ester 1 , have been synthesized by Reversible Addition‐Fragmentation Chain Transfer (RAFT) polymerization. Diblock copolymers of these homopolymers were also synthesized by chain extending P^tBuA with monomer 1 and after modification, using simple acid deprotection chemistries of the acrylate block to afford a poly (acrylic acid) block, an optically active amphiphilic diblock copolymer was isolated. The optically active amphiphilic diblock copolymers, which contain chiral amino acid moieties within the hydrophobic segment, were then self‐assembled to afford spherical micelles which were subsequently crosslinked throughout the shell layer to afford robust chiral nanoparticles. The hydrodynamic diameters (D_h) of the block copolymer micelles and nanoparticles were measured by dynamic light scattering (DLS) and the dimensions of the nanoparticles were determined using tapping‐mode atomic force microscopy (AFM) and transmission electron microscopy (TEM). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3690–3702, 2008     

Self‐assembled complexes of poly(acrylic acid) and poly(styrene)‐block‐poly(4‐vinyl pyridine)

Polymer complexes were prepared from high molecular weight poly(acrylic acid) (PAA) and poly(styrene)‐block‐poly(4‐vinyl pyridine) (PS‐b‐P4VP) in dimethyl formamide (DMF). The hydrogen bonding interactions, phase behavior, and morphology of the complexes were investigated using Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). In this A‐b‐B/C type block copolymer/homopolymer system, P4VP block of the block copolymer has strong intermolecular interaction with PAA which led to the formation of nanostructured micelles at various PAA concentrations. The pure PS‐b‐P4VP block copolymer showed a cylindrical rodlike morphology. Spherical micelles were observed in the complexes and the size of the micelles increased with increasing PAA concentration. The micelles are composed of hydrogen‐bonded PAA/P4VP core and non‐bonded PS corona. Finally, a model was proposed to explain the microphase morphology of complex based on the experimental results obtained. The selective swelling of the PS‐b‐P4VP block copolymer by PAA resulted in the formation of different micelles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1192–1202, 2009     

The Role of inclusion size in toughening of epoxy resins by spherical micelles

We report our finding of an optimal length scale for toughening of epoxies using spherical micelles formed by block copolymers. The amphiphilic diblock copolymer poly(hexylene oxide)‐poly(ethylene oxide) (PHO‐PEO) with 30 wt % PEO self‐assembled to form spherical micelles in a bisphenol A epoxy resin with a phenol novolac hardener. We systematically increased the size of the spherical micelles from 20–30 nm to 0.5–10 μm by swelling their PHO core using PHO homopolymer. Although all the blends were tougher than the unmodified epoxy, the largest enhancement of fracture resistance was measured in blends containing 0.1–1 μm spherical inclusions. This enhanced toughness was correlated with plastic deformation by shear banding in tensile test and greater roughness of the fracture surface. Smaller micelles neither induced plastic deformation nor contributed to surface roughness significantly whereas larger micelles acted as local defects resulting in early failure. These findings provide a framework in assessing the toughening effects of blended block copolymers on epoxy resins. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1125–1129, 2009     

结肠酶特异响应性两亲高分子载体的合成和表征

合成了一种可在结肠部位被特异酶解的两亲性嵌段高分子,由聚丙交酯(PLA)疏水嵌段和聚乙二醇(PEG)亲水嵌段组成,两者通过5,5′-偶氮二水杨酸(OLZ)偶联,其中的偶氮键可被结肠部位的偶氮还原酶特异酶解.利用FTIR、NMR和GPC等方法表征了共聚物的结构,并通过透射电镜(TEM)和动态光散射(DLS)等方法研究了该高分子载体在水溶液中的组装行为.结果表明MPEG-OLZ-b-PLA可在水介质中形成尺寸在30nm左右的球形胶束,并在大鼠全盲肠提取液中被特异性酶解。     

Synthesis and Characterization of Amphiphilic Cyclic Diblock Copolypeptoids from N-Heterocyclic Carbene-Mediated Zwitterionic Polymerization of N-Substituted N-carboxyanhydride

N-Heterocyclic carbene (NHC)-mediated ring-opening polymerization of N-decylN-carboxylanhydride monomer (De-NCA) has been shown to occur in a controlled manner, yielding cyclic poly(N-decyl-glycine)s (c-PNDGs) with polymer molecular weights (MW) between 4.8 and 31 kg·mol(-1) and narrow molecular weight distributions (PDI < 1.15). The reaction exhibits pseudo-first order kinetics with respect to monomer concentration. The polymer MW increases linearly with conversion, consistent with a living polymerization. ESI MS and SEC analysesconfirm the cyclic architectures of the forming polymers. DSC and WAXS studies reveal that the c-PNDG homopolymers are highly crystalline with two prominent first order transitions at 72-79°C (T(m,1)) and 166-177°C (T(m,2)), which have been attributed to the side chain and main chain melting respectively. A series of amphiphilic cyclic diblock copolypeptoids [i.e.,poly(N-methyl-glycine)-b-poly(N-decyl-glycine) (c-PNMG-b-PNDG)] with variable molecular weight and composition was synthesized by sequential NHC-mediated polymerization of the corresponding N-methyl N-carboxyanhydride (Me-NCA) and De-NCA monomers. (1)H NMR analysis reveals that adjusting the initial monomer to NHC molar ratio can readily control the block copolymer chain length and composition. Time-lapsed light scattering and cryogenic transmission electron microscopy (cryo-TEM) analysis of c-PNDG-b-PNMG samples revealed that the amphiphilic cyclic block copolypeptoids self-assemble into spherical micelles that reorganize into micron-long cylindrical micelles with uniform diameter in room temperature methanol over the course of several days. An identical morphological transition has also been noted for the linear analogs, which occurs more rapidly than for the cyclic copolypeptoids. We tentatively attribute this difference to the different crystallization kinetics of the solvophobic block (i.e., PNDG) in the cyclic and linear block copolypeptoids.     

Clonazepam release from core-shell type nanoparticles composed of poly(γ-benzyl L-glutamate) as the hydrophobic part and poly(ethylene oxide) as the hydrophilic part

Block copolymers consisting of poly(γ-benzyl L -glutamate) (PBLG) as the hydrophobic part and poly(ethylene oxide) (PEO) as the hydrophilic part were synthesized and characterized. Core shell type nanoparticles of the block copolymers (abbreviated GEG) were prepared by the dialysis method. Under fluorescence spectroscopy measurement, the GEG block copolymers were associated in water to form core shell type nanoparticles as polymeric micelles and the critical micelle concentrations (CMC) values of the block copolymers decreased with increasing PBLG chain length in the block copolymers. Transmission electron microscopy (TEM) observations revealed nanoparticles of spherical shapes. From dynamic light scattering (DLS) study, sizes of nanoparticles of GEG-1 and GEG-2 copolymer were 64.3 ± 28.7 nm and 28.9 ± 7.0 nm. The drug-loading contents of GEG-1 and GEG-2 nanoparticles were 15.2 and 8.3 wt %, respectively. These results indicated that the drug-loading contents were dependent on PBLG chain length in the copolymer. Then, the longer the PBLG chain length, the more the drug-loading contents. Release of clonazepam (CNZ) from the nanoparticles was slower in higher loading contents of CNZ than lower loading contents due to the hydrophobic interaction between PBLG core and CNZ. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 415–423, 1998     

酶促开环聚合合成双亲性H型嵌段共聚物及其自组装

通过固定化酶Novozyme435（NV435）催化聚乙二醇（PEG）开环聚合己内酯（CL）得到端基带有羟基的ABA型三嵌段聚合物,用2,2-二氯代乙酰氯将聚合物的端羟基功能化形成H型大分子引发剂,在CuCl／HMTETA体系中引发4-乙烯基吡啶（4VP）进行原子转移自由基聚合反应（ATRP）,得到了具有两亲性的H型五嵌段聚合物（PVP）2-b—PCL-b．PEG-PCL-（PVP）2,用红外光谱（FT IR）,核磁共振（^1H NMR）,凝胶渗透色谱（GPC）对其结构与分子量及其分子量分布进行了表征,结果表明：H型五嵌段聚合物分子量46121g／mol,分子量分布1．30．并利用动态光散射（DLS）和原子力显微镜（AFM）对聚合物在水溶液中的自组装行为进行了研究,H型嵌段聚合物的胶束呈球形结构,平均直径为70nm左右．     

Micellization and controlled release properties of methoxy poly(ethylene glycol)-b-poly(D,L-lactide-co-trimethylene carbonate)

Amphiphilic block copolymers composed of D,L-lactide, trimethylene carbonate and the methoxy poly (ethylene glycol) (PETLA) were synthesized with ringopening copolymerization. Studies on the micellization and drug-controlled release behavior of PETLA were performed. Both of the copolymers and the micelles were characterized with the methods of ¹H nuclear magnetic resonance (¹H-NMR), fluorescence spectroscopy, gel permeation chromatographic (GPC), dynamic light scattering (DLS), transmission electron microscopy (TEM) and ultraviolet-visible spectroscopy (UV). As a result, the critical micelle concentration of the copolymer was decreased with the increase of the hydrophobic chain length. DLS results indicated the diameters of the micelle were increased with increasing hydrophobic length. TEM photographs illustrated that micelles MT1 were regularly spherical with the diameter from 30 nm to 40 nm. Taking 9-nitro-20(S)-camptothecin (9-NC) for the model drug, the release profiles in vitro show that the release behavior from micelles was controllable and nearly in zero order after the initial burst release. __________ Translated from Acta Polymerica Sinica, 2008, 2 (in Chinese)     

Supramolecular self-assembly of block copolymer based on rigid surfactant

The supramolecular self-assembling of pyridine-containing amphiphilic block copolymers (PS-b- P4VP and PS-PI-P2VP) and 4-biphenylcarboxylic acid (BPCA) in selective solvents has been systematically studied. BPCA molecules are able to complex with the vinylpyridine (VP) moieties through hydrogen bonding, which leads to a transformation of spherical block copolymer micelles into structured nanofibers in solutions. The effects of molar ratio of BPCA to the VP repeat units, solvent selectivity, and copolymer composition on the supramolecular complex nanofiber formation have been systematically investigated by atomic force microscopy (AFM), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The formation mechanism of supramolecular self-assembly nanofibers was discussed.     

Evaluation of Isoprene Chain Extension from PEO Macromolecular Chain Transfer Agents for the Preparation of Dual, Invertible Block Copolymer Nanoassemblies

Two RAFT-capable PEO macro-CTAs, 2 and 5 kDa, were prepared and used for the polymerization of isoprene which yielded well-defined block copolymers of varied lengths and compositions. GPC analysis of the PEO macro-CTAs and block copolymers showed remaining unreacted PEO macro-CTA. Mathematical deconvolution of the GPC chromatograms allowed for the estimation of the blocking efficiency, about 50% for the 5 kDa PEO macro-CTA and 64% for the 2 kDa CTA. Self assembly of the block copolymers in both water and decane was investigated and the resulting regular and inverse assemblies, respectively, were analyzed with DLS, AFM, and TEM to ascertain their dimensions and properties. Assembly of PEO-b-PIp block copolymers in aqueous solution resulted in well-defined micelles of varying sizes while the assembly in hydrophobic, organic solvent resulted in the formation of different morphologies including large aggregates and well-defined cylindrical and spherical structures.     

Particulate and bulk bicontinuous cubic phases obtained from mixtures of glyceryl monooleate and copolymers bearing blocks of lipid-mimetic anchors in water

Copolymers based on poly(ethylene glycol) bearing one or more lipid-mimetic anchors were mixed with glycerylmonooleate (GMO)-a lipid with nonlamellar propensity-to form bulk and particulate bicontinuous cubic phases in water. The particulate phase was obtained via a liquid precursor method. Three forms of copolymer/GMO mixtures were investigated-precursor dispersions in glycerol and bulk and particulate phases in water-by visual observations, dynamic light scattering (DLS), and cryogenic transmission electron microscopy (cryo-TEM). The bulk phases were found to very slowly develop a macroscopic appearance that can be associated with the bicontinuous cubic phase. They were prepared in a slight excess of water, which became opalescent in some of the preparations. Cryo-TEM investigation of the excess showed that vesicles and particles with a dense interior coexisted. The precursors were prepared as solutions in glycerol. The viscous liquid material was investigated by DLS. Diffusion coefficients and the corresponding hydrodynamic radii, ranging from about 10 to 30 nm, were calculated. The particles are presumably of a structure similar to that of conventional emulsion droplets with GMO in the interior and copolymer molecules in the outer regions. The particulate phase in water was obtained upon hydration of the liquid precursors. The dispersions were investigated by DLS and cryo-TEM. DLS revealed the formation of nanosized particles. The size was found to increase with increasing copolymer content for copolymers with only one lipid-mimetic anchor, whereas the opposite trend was observed for the formulations with copolymers bearing more than one lipid-mimetic anchor. The shape and interior of the particles were studied by cryo-TEM. It was found that most particles were globular. For some of the compositions, particles with a dense internal structure dominated. The texture of the internal structures was assigned to dispersed bicontinuous cubic or L3 phases. In other compositions, the interior seemingly consists of arrays of interlamellar attachments.