Application of Capillary Electrophoresis for Determination of Inorganic Analytes in Waters

Aside from HPLC and GC, capillary electrophoresis (CE) is one of the most important techniques for high-performance separations in modern analytical chemistry. Its main advantages are the possibility of using different detection techniques, the possibility of in-capillary sample processing for preconcentration or derivatization, and ease of instrumental miniaturization down to the microfluidic scale. Those features are utilized in the separation of macromolecules in biochemistry and in genetic investigations, but they can be also used in determinations of inorganic ions in water analysis. This review, based on about 100 original research works, presents applications of CE methods in water analysis reported in recent decade, mostly regarding conductivity detection or indirect UV detection. The developed applications include analysis of high salinity sea waters, as well as analysis of other surface waters and drinking waters.     

细胞无机化学研究中需要关注的几个方面

本文评述了当前细胞无机化学研究中的几个方面,主要是包括钙离子和稀土离子在内的金属离子和活性小分子对细胞膜离子通道、膜受体蛋白、胞内受体蛋白以及对细胞功能的影响.     

Investigation on stability and preservation of arsenic species in iron rich water samples

Important for the accurate and reproducible determination of inorganic redox forms of arsenic in iron-rich waters is their conservation prior to analysis. Species and trace element analysis methods are commonly laboratory based. Stabilisation of samples is necessary for subsequent laboratory analysis in order to preserve the information about the system from which the samples were taken. Pre-treatment procedures based on complexation of metal ions and moderate acidification of the samples are presented. The concentration of the stabilisation agent and the storage temperature were optimised. The most satisfactory results were obtained with 0.01 mol l(-1) phosphoric acid and a storage at 6 degrees C.     

Application of capillary isotachophoresis and capillary zone electrophoresis to the determination of inorganic ions in food and feed samples

The purpose of this review is to summarise critically the possibilities of capillary isotachophoresis and capillary zone electrophoresis for the determination of inorganic ions in food and feed samples. This article covers papers published since 1977.     

Interference of Humic Substances in the Spectrophotometric Determination of Bromate by Phenothiazines in Natural Waters

Abstract

The spectrophotometric method of bromate (BrO₃ ^?) determination by phenothiazines was applied to natural water samples and the interferences due to the presence of inorganic and humic substances were investigated. Common ions present in natural waters did not interfere and only the less abundant NO₂ ^? and Fe²⁺ exhibited strong interferences. Interferences of the two latter ions, if they existed, could be controlled and the method proved to be accurate and with a low detection limit. However, it was found that the presence of soluble humic substances resulted in positive interference, rendering the method unsuitable for bromate determination in natural waters and restricted its use in pure bromate solutions. This interference can be attributed to the electron acceptor groups invariably existing in the humic molecules. Since humic substances can remain in the water even after its ozonation, they will also contribute to a positive interference in bromate determination in potable waters.     

Preconcentration of inorganic mercury with an anion-exchange resin and direct reduction—aeration measurements by cold-vapour atomic absorption spectrometry

Inorganic mercury ions (5–50 ng l^-1) present in natural waters (500 ml) are concentrated on anion-exchange resin (0.2 g; chloride form) in a batchwise operation. The resin is filtered off and introduced into a bubbler containing tin(II) solution. The adsorbed mercury ions are reduced to the metal and vaporized with a stream of air in a closed system. Satisfactory recoveries are obtained for sea waters made 0.1 M in nitric acid, and for river and spring waters also made 0.1 M in nitric acid or 0.01 M in ammonium thiocyanate. The method preconcentrates traces of inorganic mercury ions by an order of magnitude, and is also effective in preventing mercury loss during sample storage.     

Environmental water monitoring by capillary electrophoresis and result comparison with solvent chemistry techniques

The aim of this work was to determine inorganic ions from natural waters by capillary electrophoresis (CE) and to compare the results obtained with those measured with conventional solvent chemistry techniques. The project was part of a larger CE study, during which we measured inorganic ions from some lake and river systems and groundwaters in Southern Finland. Results obtained from contaminated Finnish waters were compared with samples from the River Rhine in the Düsseldorf area. Two CE methods were used for analysis: one for determination of chloride, sulfate, nitrite and nitrate at pH 7.7 and the other for ammonium, potassium, calcium, sodium and magnesium at pH 3.6, both methods using identification based on indirect UV detection. Two separation methods were used in order to prevent complex formation of metals with sulfate, hydroxide and decomposed organic matter present in the environmental samples. On the basis of the CE studies dilution was needed for those samples having more than 100 mg/l of sulfate, chloride, calcium and sodium. On average, the natural waters in the study contained ammonium, magnesium, sodium, potassium and calcium below 0.3, 20, 200, 20, and 200 mg/l, respectively. The concentrations of chloride, sulfate, nitrite and nitrate were below 20, 100, 10, and 10 mg/l, respectively. Correlation of the CE results with those acquired by titration, atomic absorption spectrometry, ion chromatography and flow injection analysis were obtained; R2 values for the comparison tests varied from 0.8816 to 0.9994 depending on the ion. The repeatabilities of the anion and cation CE methods were tested using laboratory-made reference sample mixtures with high and low salt concentration.     

Analysis of inorganic species in environmental samples by capillary electrophoresis

The use of capillary electrophoresis for the determination of inorganic species in environmental samples is reviewed. Topics covered include the separation of inorganic anions, inorganic cations, transition metal cations and organometals in different environmental matrices, such as atmospheric deposition, atmospheric aerosols, gases, natural waters, waste waters, soil, sediment and marine biological samples. Cited literature is gathered according to the type of matrix, so that the focus is on the discussion of matrix effects rather than on the method development for a single class of compounds. For each matrix, surveyed methods are tabulated in order to assist the method selection. Innovative applications of capillary electrophoresis to advanced environmental research are also emphasised.     

Quantification of anions and cations in environmental water samples. Measurements with capillary electrophoresis and indirect-UV detection.

The aim of this study was to validate two separation methods for determination of inorganic anions and cations from natural waters with capillary electrophoresis (CE) by using indirect-UV detection. The research is related to method development for screening of groundwater samples obtained in site investigations for spent fuel of the Finnish nuclear industry. In CE analysis, anions were separated in pyromellitic acid (pH 7.7) in the order bromide, chloride, sulphate, nitrite, nitrate, fluoride and dihydrogenphosphate. Cations were separated at pH 3.6 after anions using an 18-crown-6-ether solution. In these analyses, ammonium migrated first followed by potassium, calcium, sodium and magnesium. The concentrations of the ions in the natural water samples were calculated by using two or three calibration curves made using reference solutions at concentration levels of 0.5-250 mg/l. The repeatabilities of the anion and cation methods were tested using laboratory-made reference sample mixtures with high and low salt concentrations. The limits of quantification in the analyses were between 0.02 and 0.1 mg/l, depending on the ion. Concentrations of ions tested in natural waters varied from a few milligrams to tens of grams per litre.     

Solid-phase extraction for metabolomic analysis of high-salinity samples by capillary electrophoresis-mass spectrometry

Environmental samples such as soil solutions contain inorganic ions such as NH4(+), K(+), Na(+), NO3(-), and PO4(3-) in high concentrations, which must be removed prior to capillary electrophoresis-mass spectrometry analysis to obtain accurate results. However, the separation of these inorganic ions from ionic metabolites, which are the target compounds in capillary electrophoresis-mass spectrometry analysis, is difficult because the physicochemical properties of the inorganic ions are similar to those of the ionic metabolites. In this study, we used various solid-phase extraction (SPE) columns for the purification of the samples containing inorganic ions in high concentrations. We found that cation-exchange SPE columns successfully filtered out the inorganic ions while retaining most of the organic compounds, which were easily collected with high recovery rates. In addition, 17 cationic metabolites in the soil solution were quantified by CE-MS analysis following the SPE purification process. The results suggest that our method can be used to analyze other environmental samples containing inorganic ions in high concentrations.     

Use of inorganic, complex-forming ions for selectivity enhancement in capillary electrophoretic separation of organic compounds

Capillary electrophoresis (CE) is a powerful separation method based on the migration of charged species under the influence of electric field. The main merits of CE are high separation efficiency, short analysis time and small consumption of solvents and samples. However, the main drawbacks of CE are generally lower sensitivity compared to classical column-chromatographic methods.Selectivity and/or sensitivity of CE separation can be improved by forming complexes between analytes and a complex-forming reagent present as an additive in the background electrolyte (BGE). We focus this review primarily on the application of inorganic complex-forming reagents added to the BGE to separate organic ligands. We briefly mention common CE separations of inorganic analytes (mainly metal ions) using BGEs with organic ligands (e.g., hydroxycarboxylic or aminopolycarboxylic acids) as selectors.The review involves brief theoretical consideration of the significance of the effect of complex formation on separation selectivity and/or sensitivity in CE, but the major topic is critical evaluation of different inorganic complex-forming reagents used recently in the CE analysis of organic compounds, including:

(i)

borate, tungstate and molybdate in separating organic compounds possessing vicinal -OH groups;

(ii)

ligand-exchange CE and capillary electrochromatography in chiral analysis; and,

(iii)

the role of metal ions as central ions employed for selectivity enhancement of CE separation of various classes of organic compounds, including biopolymers.

     

Ion chromatography in the analysis of natural waters

Ion chromatography is a new method for the determination of cations and anions in solution, based on ion-exchange separation of the analysed ions on a separator column, suppression of the background eluent signal on a suppressor column and finally, conductometric detection. Ion chromatography is characterized by high sensitivity, selectivity and reproducibility. This method now is widely applied to the determination of inorganic and organic ions in natural waters.     

Capillary zone electrophoresis as a simple approach for the study of p-arsanilic acid transformation in the process of photolytic degradation

Arsenic aromatic compounds including p-arsanylic acid (pASA) are still widely used in a number of countries as the feed additives in animal breeding resulting in its entering the environment. Under the influence of oxidizing agents or UV radiation, pASA undergoes transformations leading to generation of inorganic arsenic species that are more mobile and toxic than organic ones. On the one hand, an approach based on the treatment of contaminated waters by UV irradiation seems perspective for their detoxification, but the feasibility of this approach depends on the composition of the products forming as a result of photodegradation. In the present work, a CZE was applied for the study of the pASA degradation process during stationary (308 nm) photolysis in the presence of Fe(III)-oxalate complex. A developed assay allowed controlling the parent compounds and also As-containing products of pASA degradation, presented mainly by arsenate and arsenite ions. It was found that the main inorganic derivatives of the pASA photolytic conversions are presented by arsenate and arsenite ions whose ratio depends on the initial amount of pASA and reaction conditions.     

Determination of labile inorganic and organic species of Al and Cu in river waters using the diffusive gradients in thin films technique

The diffusive gradients in thin films (DGT) technique, using a diffusive gel or a restrictive gel, was evaluated for the determination of labile inorganic and organic species of Al and Cu in model synthetic solutions and river water samples. Experiments were performed both in situ and in the laboratory. In the solutions containing Al ions, the major labile fraction consisted of inorganic species. The organic complex fractions were mainly kinetically inert. For the model Cu solutions, the most labile fraction consisted of inorganic species; however, significant amounts of labile organic complexes of Cu were also present. A comparison was made between the results obtained using restrictive gel DGT and tangential flow ultrafiltration (TF-UF). The Cu fraction determined by restrictive gel DGT (corresponding to the "free" ions plus the labile fraction of small molecular size complexes) was larger than that determined by TF-UF (corresponding to all small molecular size ions), suggesting that the techniques exhibited different porosities for discrimination of inorganic species. For the river water samples analyzed in the laboratory, less than 45% of the analytes were present in labile forms, with most being organic species. For the in situ measurements, the labile inorganic and organic fractions were larger than those obtained in the laboratory analyses. These differences could have been due to errors incurred during sample collection and storage. All results were consistent with those found using two different methods, namely, solid-phase extraction and the DGT technique employing the apparent diffusion coefficient.     

The effect of organic matter and colloidal particles on the determination of chromium(VI) in natural waters

The chromium(VI) contents of two water samples, a river water and a sea-water, were determined by means of solvent extraction with APDC (ammonium pyrrolidinedithiocarbamate) into chloroform and by co-precipitation with iron(III) hydroxide. The analytical results depended on the separation method used, possibly because of differences in the behaviour of the chemical species of chromium in natural waters. Various chromium species, including simple inorganic ions, organic complexes, Cr(III) adsorbed on inorganic colloids and Cr(III) combined with organic polymers, were prepared, and their analytical characteristics were investigated.     

Recent applications of the ring-oven technique : A brief review

The ring-oven technique is a special type of spot analysis. In this review, papers published since 1976 are discussed. The aspects dealt with include developments in the technique and its use, the identification and determination of inorganic ions, organic substances, enzymatic analysis, applications to air and water samples, and combinations with other techniques.     

Flow-injection spectrophotometric determination of aluminium in water with pyrocatechol violet

Optimum conditions for the adaptation of the spectrophotometric pyrocatechol violet method for aluminium to a flow-injection system are described. The detection limit is 3 μg Al l^?1 and calibration graphs are linear up to 3 or 10 mg l^?1 (with 200-μl or 10-μl injection loops, respectively). The relative standard deviation is 〈 2% at 0.1 mg Al l^?1. Potential interferences of 40 common inorganic ions and of 20 organic substances, including fulvic acid, are reported. With the use of conventional masking agents and predigestion of samples with high organic content, the method is suitable for determining total aluminium in natural waters.     

The colorimetric determination of silicate with special reference to sea and natural waters

The optimum conditions for the determination of silicate in natural waters by a molybdenum blue method have been investigated p-Methylaminophenol sulphate has a number of advantages over other reducing agents for the reduction of silicomolybdic acid to molybdenum blue. Beer's law is obeyed up to concentrations of at least 3 mg/l.The interference of several inorganic ions has been investigated; none of those encountered in natural waters is likely to cause error. The method has been applied to the analysis of sea-water and the “salt error” correction evaluated.     

Analysis of inorganic and small organic ions by CE with amperometric detection

Capillary electrophoresis has become a widely useful analytical technology. Amperometric detection is extensively employed in capillary electrophoresis for its many inherent virtues, such as rapid response, remarkable sensitivity, and low cost of both detectors and instrumentations. Analysis of inorganic and small organic ions by capillary electrophoresis is an important research field. This review focuses on the recent developments of capillary electrophoresis coupled with amperometric detection for analysis of inorganic and small organic ions. Advancements in electrophoresis separation modes, amperometric detection modes, working electrodes, and applications of inorganic ions, amino acids, phenols, and amines are discussed.