Capillary zone electrophoresis of rare earth metals with indirect UV absorbance detection

The separation of 14 lanthanides by capillary zone electrophoresis was studied in the background electrolyte containing hydroxyisobutyric acid as complexing counter-ion and creatinine as a UV absorbing coion for indirect detection of lanthanide zones. A complete separation was achieved in less than 5 min and the applicability of the method for the analysis of real samples was demonstrated.     

Capillary electrophoresis procedure for the simultaneous analysis and stoichiometry determination of a drug and its counter-ion by using dual-opposite end injection and contactless conductivity detection: Application to labetalol hydrochloride

In this work, a capillary electrophoresis (CE) procedure was developed for the simultaneous determination of a pharmaceutical drug and its counter-ion, namely labetalol hydrochloride. For this purpose, an uncoated fused-silica capillary, a low conductivity background electrolyte (BGE) and a capacitively coupled contactless conductivity detector (C⁴D) were employed. This detection system is highly sensitive and enables detection of inorganic as well as organic ions unlike with direct UV detection. Moreover, to be able to simultaneously analyze the cationic drug (labetalol⁺) and its anionic counter-ion (Cl⁻) in the same electrophoretic run without the need of a coated capillary, a dual-opposite end injection was performed. In this technique, the sample is hydrodynamically injected into both ends of the capillary. This method is simple and easy to perform since the different injection steps are automated by the CE software.This novel CE-C⁴D procedure with dual-opposite end injection has been successfully validated and applied for the analysis of chloride content in an adrenergic antagonist (labetalol hydrochloride). Thus, the hereby developed method has been shown to enable fast (analysis time < 10 min), precise (repeatability of migration times < 0.7% and of corrected-peak areas < 3.3%; n = 6) and rugged analyses for the simultaneous determination of a pharmaceutical drug and its counter-ion.     

Capillary electrophoretic determination of thiosulfate,sulfide and sulfite using in-capillary derivatization with iodine

A new capillary electrophoresis (CE) method was developed for the rapid, simple and selective determination of thiosulfate, sulfide and sulfite species. The proposed method is based on the in-capillary derivatization of separated sulfur anions by mixing their zones with the iodine zone during the electrophoretic migration and direct UV detection of iodide formed. The optimal conditions for the separation and derivatization reaction were established by varying electrolyte pH, electrolyte counter-ion, concentration of iodine, and applied voltage. The optimized separations were carried out in 20 mmol/L Tris-chloride electrolyte (pH 8.5) using direct UV detection at 214 nm. All three sulfur species were well resolved in less than 4 min. The method gives repeatability comparable or even better than this obtained for sulfur anions using standard CE technique. The proposed CE system was applied to the monitoring of sulfur anions in spent fixing solutions during the electrolytic oxidation.     

Evaluation of a monolithic silica column operated in the hydrophilic interaction chromatography mode with evaporative light scattering detection for the separation and detection of counter-ions

In this work a monolithic silica column operated in the hydrophilic interaction chromatography (HILIC) mode in conjunction with an evaporative light scattering detector (ELSD) was investigated. Lithium, sodium and potassium were used as the test counter-ions for this evaluation. Chromatographic properties of this column operated in the HILIC mode were determined by varying key mobile phase parameters, such as pH, flow rate, buffer strength, acid and organic modifier. As organic content was increased from 60 to 90% acetonitrile, retention time increased on average by a factor of seven for the test cations listed above. Buffer concentration and pH were also observed to have an effect, although not as significant as the HILIC effect that was observed by changing organic content. Flow rates up to 5 mL/min were utilized to perform counter-ion separations in less than 3 min. After examining the changes in retention, resolution, and peak shape an optimized method was established and then further evaluated for linearity, reproducibility, and limit of detection (LOD) for sodium. Linearity was acceptable with an R2 value of 0.999 across the working-standard range and a LOD of 0.1 microg/mL was calculated. The reproducibility on the counter-ion determination from pharmaceutical sodium salts was 1.6% R.S.D. on average, and the accuracy of the counter-ion prediction was approximately 3% from theory when salt content was corrected for potency.     

Analysis of coptisine, berberine and palmatine in adulterated Chinese medicine by capillary electrophoresis-electrospray ion trap mass spectrometry

A rapid and simple reversed-phase liquid chromatographic method that did not require the derivatization of 4-amino-3-hydroxybutyric acid (GABOB) was developed and validated. The method proved to be suitable for the determination of GABOB concentrations in finished pharmaceutical product (tablets). The method was developed using a RP-18 column, UV detection at 210 nm and 0.01 M sodium heptasulphonate solution, at pH 2.4, as the mobile phase. Different validation parameters were included and satisfactorily evaluated. The specificity of the method was demonstrated. Linearity was established in the range 0.40–0.60 mg/ml (r=0.997). The method showed excellent accuracy (100.1%). Precision (repeatability) gave a relative standard deviation value of 0.68%, while the intermediate precision was 1.70%. A robustness test showing the influence of different pH values and counter-ion concentrations was also performed.     

Univalent salts as modifiers in micellar capillary electrophoresis

The influence of three univalent salts (LiCl, NaCl and RbCl) on the separation of amino acids labelled with 3-(4-carboxybenzoyl)-quinoline-2-carboxaldehyde (CBQCA) in micellar capillary electrophoresis has been studied. Capacity factors for a series of eight CBQCA-labelled amino acids in a sodium dodecyl sulfate (SDS) micellar system containing different concentrations of salt were measured and were found to be related to both the hydrodynamic radius of the salt counter-ion (Li(+), Na(+), Rb(+)) and the relative hydrophobicity of the amino acid. Affinities of the analytes for the micelles were generally observed to decrease as the salt concentration in the background electrolyte was increased from 10 to 50 mM. This decrease in affinity was greatest in the presence of the salt counter-ion with the smallest hydrodynamic radius and is primarily due to an increased resistance to mass transfer. Furthermore, interaction of hydrophobic analytes with the micelles is greater than that of hydrophilic analytes at all salt concentrations due to the greater strength of the hydrophobic interactions and this effect is also enhanced in the presence of a smaller counter-ion. No negative effects due to Joule heating or electromigrative dispersion were observed for low to moderate concentrations of salt, which suggests that the use of simple univalent salts to modify analyte/micelle affinities can be a practical method for improving the separation of complex mixtures.     

Simultaneous Determination of Glyphosate,Glufosinate, and Aminomethylphosphonic Acid by Capillary Electrophoresis After 9‐Fluorenylmethyl Chloroformate Derivatization

A capillary electrophoresis (CE) with UV absorption detection method is described for the simultaneous determination of glufosinate, glyphosate, and aminomethylphosphoric acid. The 9‐fluorenylmethyl chloroformate (FMOC‐Cl) was used for precolumn derivatization of the non‐absorbing herbicides. The three analytes were separated by CE in 9 min with 25 mM borate buffer at pH 9, followed by detection with a UV detector at 260 nm. We demonstrate how the detection limit can be enhanced by using acetonitrile‐salt mixtures. With acetonitrile‐salt mixtures, the limit of detection (LOD) was in the 10^?7 M range. Linearity of more than two orders of magnitude was generally obtained. Precisions of migration times and peak areas were less than 0.9% and 7.5%, respectively. The applicabilities of the method for the analysis of ground water and lake water were examined.     

Rapid determination of thiamine,riboflavin, pyridoxine,and niacinamide in infant formulas by liquid chromatography

A simplified, simultaneous determination of vitamins B1, B2, B3, and B6 in supplemented infant formulas was developed from a single deproteinized sample extract, with analysis by reversed-phase, ion-pair chromatography with an acidified methanol-water mobile phase. The dioctylsulfosuccinate counter-ion facilitates unique retention of the pyridine-based vitamins (niacinamide and pyridoxine) and allows for concurrent measurement of both the pyridoxal and riboflavin 5'-phosphate endogenous components of milk. Other naturally occurring undetected vitamin congeners have minimal analytical significance. UV detection is used for niacinamide, and programmed fluorescence detection is used for riboflavin and the B6 vitamins. Thiamine is routinely determined sequentially under modified elution conditions.     

Application of self-organizing maps for the classification of chromatographic systems and prediction of values of chromatographic quantities

The separation of a complex mixture of inorganic and organic anions by ion chromatography–capillary electrophoresis using a cationic polymer added to the background electrolyte and indirect UV detection has been studied. The addition of unmodified polymer to an electrolyte suitable for indirect detection resulted in the appearance of a system peak due to the counter-anion on the polymer and while the position of the analytes relative to this system peak could be changed, this was found to be an unacceptable approach for mixtures of large numbers of analytes. Although conversion of the polymer to replace the counter-ion with the indirect UV detection probe ion simplified the system, this approach restricted the flexibility of the system because the probe and polymer concentration were necessarily linked. This limitation could be overcome by selecting the appropriate type of probe ion, with probes having a low ion-exchange selectivity coefficient providing greater retention of analytes than probes with a high ion-exchange selectivity coefficient. Three electrolyte systems with different probes (benzoate, chromate and phthalate) were modelled using a previously derived migration equation and this was used to optimise the electrolyte composition to enable the separation of a mixture of 24 inorganic and organic anions within 7 min. The electrolyte composition was then optimised for the analysis of anions in Bayer liquor with the final separation selectivity being substantially improved for selected key analytes.     

Theoretical studies on the dimerization of substituted paraphenylenediamine radical cations

Organic radical cations form dicationic dimers in solution, observed experimentally as diamagnetic species in temperature-dependent EPR and low temperature UV/Vis spectroscopy. Dimerization of paraphenylenediamine, N,N-dimethyl-paraphenylenediamine and 2,3,5,6-tetramethyl-paraphenylenediamine radical cation in ethanol/diethylether mixture was investigated theoretically according to geometry, energetics and UV/Vis spectroscopy. Density Functional Theory including dispersion correction describes stable dimers after geometry optimization with conductor-like screening model of solvation and inclusion of the counter-ion. Energy corrections were done on double-hybrid Density Functional Theory with perturbative second-order correlation (B2PLYP-D) including basis set superposition error (BSSE), and multireference M?ller-Plesset second-order perturbation theory method (MRMP2) based on complete active space method (CASSCF(2,2)) single point calculation, respectively. All three dication π-dimers exhibit long multicenter π-bonds around 2.9±0.1? with strongly interacting orbitals. Substitution with methyl groups does not influence the dimerization process substantially. Dispersion interaction and electrostatic attraction from counter-ion play an important role to stabilize the dication dimers in solution. Dispersion-corrected double hybrid functional B2PLYP-D and CASSCF(2,2) can describe the interaction energetics properly. Vertical excitations were computed with Tamm-Dancoff approximation for time-dependent Density Functional Theory (TDA-DFT) at the B3LYP level with the cc-pVTZ basis set including ethanol solvent molecules explicitly. A strong interaction of the counter-ion and the solvent ethanol with the monomeric species is observed, whereas in the dimers the strong interaction of both radical cation species is the dominating factor for the additional peak in UV/Vis spectra.     

New designer drug 1-(3,4-methylenedioxybenzyl) piperazine (MDBP): studies on its metabolism and toxicological detection in rat urine using gas chromatography/mass spectrometry

Studies are described on the metabolism and toxicological analysis of the piperazine-derived designer drug 1-(3,4-methylenedioxybenzyl)piperazine (MDBP) in rat urine using gas chromatography/mass spectrometry (GC/MS). The identified metabolites indicated that MDBP was metabolized by demethylenation and subsequent methylation to N-(4-hydroxy-3-methoxybenzyl)piperazine followed by partial glucuronidation or sulfation. Additionally, degradation of the piperazine moiety to N-(3,4-methylenedioxybenzyl)ethylenediamine and 3,4-methylenedioxybenzylamine and N-dealkylation to piperazine were observed. The authors' systematic toxicological analysis (STA) procedure using full-scan GC/MS after acid hydrolysis, liquid/liquid extraction and microwave-assisted acetylation allowed the detection of MDBP and its above-mentioned metabolites in rat urine after single administration of a dose calculated from the doses commonly taken by drug users. Assuming similar metabolism, the described STA procedure should be suitable for proof of an intake of MDBP by analysis of human urine.     

Identification of poliovirions and subviral particles by capillary electrophoresis

Poliovirions, purified from infected cell extracts with anion-exchange chromatography, can be analyzed and identified by CE in untreated fused silica capillaries using UV detection. Other subviral particles can be eluted as well from the same infected cell extract using a higher salt concentration buffer on the ion-exchange chromatography. Virions can be identified because of their conversion into empty capsids upon heating at 56°C. As a result of heating, the viral genome is released from the capsid. Here, we show that during this incubation some intermediate particles were found. The latter were identified by enzymatic peak shift analysis. The high salt concentration eluate subviral particles were analyzed with preincubation affinity CE together with their sensitivity for RNase and proteinase K treatment. Electropherograms of the higher salt concentration eluate display a mixture of at least four different subviral particles. One particle proved to have an [N1, H] antigenicity and was resistant to RNase and proteinase K digestion. The remaining particles were all sensitive to proteinase K treatment. This CE method proved to be valuable in the detection, identification and analysis of poliovirions and poliovirus particles offering an alternative powerful, cheap, fast and easy analysis method.     

离子色谱法分析加碘食盐中的微量碘

研究了离子色谱法分析加碘食盐中的微量碘的分析方法。用硫化钠将加碘盐中的碘酸根还原成碘离子，用乙醇提取碘离子，用较高浓度的碳酸钠－碳酸氢钠淋洗液；紫外检测波长２１５ｎｍ；碘的回收率在９６．１％￣９９．８％之间，方法简便，快速。     

Direct detection method of oligosaccharides by high-performance liquid chromatography with charged aerosol detection

A simple and rapid detection method of oligosaccharides using high-performance liquid chromatography with a charged aerosol detection (HPLC-CAD) was studied. The direct detection of a sialylglycopeptide (SGP) derived from egg yolk was accomplished by HPLC-CAD using an amido-silica column, and its limit of detection was 0.40 pmol [signal-to-noise ratio (S/N) = 3]. The sensitivity of this method was lower than that of the fluorescence detection; however, the method showed approximately 5 times higher sensitivity than that using the conventional UV absorbance detection. Furthermore, this method was used for the analysis of the acid hydrolysis products of SGP. Monosialo- and asialo-oligosaccharides as well as free sialic acid were detected without using fluorescent derivatization. These results indicate that the present method is a new tool for the analysis of oligosaccharides.     

NMR study on (+/-)-1-[3-(2-methoxyphenoxy)-2-hydroxypropyl]-4-[(2,6-dimethylphenyl)aminocarbonylmethyl]piperazine dihydrochloride salt

(+/-)-1-[3-(2-Methoxyphenoxy)-2-hydroxypropyl]-4-[(2,6-dimethylphenyl)aminocarbonylmethyl]piperazine dihydrochloride salt was studied spectroscopically. Complete NMR assignments for dihydrochloride salt were made using DEPT, H-H COSY, as well as HMQC and HMBC heteronuclear correlation techniques.     

Determination of glucosamine and carisoprodol in pharmaceutical formulations by LC with pre-column derivatization and UV detection

A simple and reliable precolumn derivatization liquid chromatography method with ultraviolet detection has been developed and validated for the analysis of glucosamine (GS) in various dietary supplement formulations and raw materials. Additionally, the proposed method was used for analysis of carisoprodol (CR) found in ternary mixture with paracetamol (PR) and caffeine (CF). The linearity ranges were 1-100 μg/mL for GS, 1-150 μg/mL for CR, PR and CF. Derivatization was used with 1,2-naphthoquinone-4-sulphonic acid sodium salt in the presence of borate buffer. Chromatographic separation of GS-naphthoquinone derivative was achieved by using a mixture of acetonitrile and water (pH 7.3 adjusted with 0.1 M NaOH) in the ratio 10:90, v/v and flow-rate of 1.0 mL/min. UV detection was carried out at 280 nm. For PR, CF, and CR-naphthoquinone derivative, the chromatographic separation was achieved by using mixture of acetonitrile and 20 mM KH(2)PO(4) (pH 3.0 adjusted with phosphoric acid) in the ratio 20:80, v/v and flow-rate of 1.0 mL/min. UV detection was carried out at 275 nm. The limits of detection were 37.2, 35.9, 30.4 and 40.0 ng/mL for GS, CR, PR and CF, respectively.     

High-performance liquid chromatographic resolution of 1-(1,4-benzodioxane-2-formyl)-piperazine enantiomers after chiral derivatization

Chiral separation of racemic mixtures is of the greatest importance to the pharmaceutical industry, as the isomers of a given racemate may exhibit substantially different pharmacological effects, not to mention possibly differing toxicity behaviour. A novel chiral separation method is developed for the determination of 1-(1,4-benzodioxane-2-formyl)piperazine (BFP) enantiomers. The indirect resolution is performed by applying precolumn derivatization with the chiral reagent 2,3,4,6-tetra-O-acetyl-beta-D-glucopyranosyl isothiocyanate (GITC). The resulting diastereoisomers are separated on a reversed-phase ODS column with methanol-potassium dihydrogen phosphate (0.02mol/L, 50:50) as mobile phase. UV detection is at 250 nm. The effect of mobile phase composition upon resolution and analysis time is investigated. Two diastereoisomers show nearly base-line separation under optimal chromatographic conditions. The presented study provides a simple and accurate method for the enantiomeric quality control and the optical purity assay of BFP.     

Determination of verapamil and its primary metabolites in serum by ion-pair adsorption high-performance liquid chromatography

A high-performance liquid chromatographic (HPLC) method for the simultaneous quantitation of verapamil, norverapamil, N-dealkylverapamil (D617) and N-dealkylnorverapamil (D620) concentrations in serum is developed. Analysis is performed on a microparticulate (10 microns) silica column using a counter-ion solvent system (0.6 mM NaBr in methanol). Column effluent is monitored by fluorescence detection at an excitation wavelength of 203 nm. The limit of sensitivity is less than 1 ng for all compounds in serum. No potential sources of interference are identified and a coefficient of variation of less than 10% is observed on replicate verapamil determinations. The method has the advantages of complete resolution of the metabolites of verapamil, low limits of detection, high degree of reproducibility, and short analysis time.     

Fast HPLC method using ion-pair and hydrophilic interaction liquid chromatography for determination of phenylephrine in pharmaceutical formulations

A rapid procedure based on a direct extraction and HPLC determination with fluorescence detection of phenylephrine in pharmaceutical sachets that include a large excess of paracetamol (65 + 1, w/w), ascorbic acid (5 + 1, w/w), and other excipients (aspartame and sucrose) was developed and validated. The final optimized chromatographic method for ion-pair chromatography used an XTerra RP18 column, 3 microm particle size, 50 x 3.0 mm id. The mobile phase consisted of a mixture of acetonitrile and buffer (10 mM sodium octane-1-sulfonate, adjusted with H3PO4 to pH 2.2; 200 + 800, v/v), with a constant flow rate of 0.3 mL/min. The separation was carried out at 30 degrees C, and the injection volume was 3 microL. Fluorescence detection was performed at excitation and emission wavelengths of 275 and 310 nm, respectively. The mobile phase parameters, such as the organic solvent fraction (acetonitrile) in mobile phase as an organic modifier, the concentration of sodium octane-1-sulfonate as a counter-ion, temperature, and pH of mobile phase, were studied. As an alternative to ion-pair chromatography, hydrophilic interaction liquid chromatography (HILIC) was investigated using a Luna HILIC column, 3 microm, 100 x 4.6 mm id. The mobile phase consisted of acetonitrile and buffer (5 mM potassium dihydrogen phosphate, adjusted with H3PO4 to pH 2.5; 750 + 250, v/v) at a flow rate of 0.8 mL/min. The separation was carried out at 25 degrees C, and the injection volume was 5 microL. The proposed method has an advantage of a very simple sample pretreatment, and is much faster than the currently utilized HPLC methods using gradient elution and UV detection. Commercial samples of sachets were successfully analyzed by the proposed HPLC method.     

Workplace monitoring of isocyanates using ion trap liquid chromatography/tandem mass spectrometry

A sensitive liquid chromatography/ion trap tandem mass spectrometry method was developed for the qualitative and quantitative detection of isocyanates in air. The method is based on derivatization of isocyanates with 1-(2-methoxyphenyl)piperazine during air sampling. The extracts are analyzed using an ion trap LC/MS system equipped with an electrospray (ESI) ion source. The method shows high linearity, specificity, accuracy and precision. The limits of detection are 40x to 55x lower than with UV-based methods.