A method is described for the determination of the polarity of mixed organic solvents by using the fluorescent probe Hostasol Red (HR) desposited on the outer surface of nanosized zeolite L. Organic solvents and their mixtures can be roughly classified according to their polarity with bare eyes and fluorometrically. Emission peaks range from 520 to 640 nm. Some solvents act as quenchers. The method is studied with series of protic and nonprotic solvents, and with selected mixtures of organic solvents.
Graphical abstract The dye Hostalene Red adsorbed on nanosized zeolite shows strong fluorescence solvatochromism. This can be exploited to quickly assess the polarity of solvents and solvent mixtures.
Hetero-dimeric magnetic nanoparticles of the type Au-Fe3O4 have been synthesised from separately prepared, differently shaped (spheres and cubes), monodisperse nanoparticles. This synthesis was achieved by the following steps: (a) Mono-functionalising each type of nanoparticles with aldehyde functional groups through a solid support approach, where nanoparticle decorated silica nanoparticles were fabricated as an intermediate step; (b) Derivatising the functional faces with complementary functionalities (e.g. amines and carboxylic acids); (c) Dimerising the two types of particles via amide bond formation. The resulting hetero-dimers were characterised by high-resolution TEM, Fourier transform IR spectroscopy and other appropriate methods.
Graphical Abstract Nano-LEGO: Assembling two types of separately prepared nanoparticles into a hetero-dimer is the first step towards complex nano-architectures. This study shows a solid support approach to combine a gold and a magnetite nanocrystal.
An enzyme immobilized on a mesoporous silica nanoparticle can serve as a multiple catalyst for the synthesis of industrially useful chemicals. In this work, MCM-41 nanoparticles were coated with polyethylenimine (MCM-41@PEI) and further modified by chelation of divalent metal ions (M = Co2+, Cu2+, or Pd2+) to produce metal-chelated silica nanoparticles (MCM-41@PEI-M). Thermomyces lanuginosa lipase (TLL) was immobilized onto MCM-41, MCM-41@PEI, and MCM-41@PEI-M by physical adsorption. Maximum immobilization yield and efficiency of 75 ± 3.5 and 65 ± 2.7% were obtained for MCM@PEI-Co, respectively. The highest biocatalytic activity at extremely acidic and basic pH (pH = 3 and 10) values were achieved for MCM-PEI-Co and MCM-PEI-Cu, respectively. Optimum enzymatic activity was observed for MCM-41@PEI-Co at 75 °C, while immobilized lipase on the Co-chelated support retained 70% of its initial activity after 14 days of storage at room temperature. Due to its efficient catalytic performance, MCM-41@PEI-Co was selected for the synthesis of ethyl valerate in the presence of valeric acid and ethanol. The enzymatic esterification yield for immobilized lipase onto MCM-41@PEI-Co was 60 and 53%, respectively, after 24 h of incubation in n-hexane and dimethyl sulfoxide media.
Graphical Abstract Divalent metal chelated polyethylenimine coated MCM-41 (MCM-41@PEI-M) was used for immobilization of Thermomyces lanuginosa lipase catalyzing green apple flavor preparation
The authors describe new bifunctional mesoporous silica nanoparticles (NPs) for specific targeting of tumor cells and for intracellular delivery of the cancer drug doxorubicin (DOX). Mesoporous silica nanoparticles (MSNPs) were coated with blue fluorescent N-graphene quantum dots, loaded with the drug DOX, and finally coated with hyaluronic acid (HA). Cellular uptake of the NPs with an architecture of the type HA-DOX-GQD@MSNPs enabled imaging of human cervical carcinoma (HeLa) cells via fluorescence microscopy. The cytotoxicity of the nanoparticles on HeLa cells was also assessed. The results suggest that the NPs are higher cytotoxicity effect and exert in living cell imaging ability. Compared to the majority of other drug nanocarrier systems, the one described here enables simultaneous DOX release and fluorescent monitoring.
Graphical abstract Schematic of the bifunctional mesoporous silica nanoparticles were obtained via the Stöber method, along with the doxorubicin loaded and the hyaluronic acid capped. The sensor shows good specificity and significant cytotoxicity effect on Hela cells. (TEOS: tetraethyl orthosilicate; GQDs: graphene quantum dots; DOX: doxorubicin; HA: Hyaluronic acid).
An efficient approach is demonstrated for preparing particles consisting of a silver core and a shell of molecularly imprinted polymer (Ag@MIP). The MIP is prepared by using bisphenol A (BPA) as the template and 4-vinylpyridine as the functional monomer. The Ag@MIP fulfills a dual function in that the silver core acts as a SERS substrate, while the MIP allows for selective recognition of BPA. The Ag@MIP is characterized by scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, thermogravimetric analysis and Raman spectroscopy. The Raman intensity of Ag@MIP is higher than that of bare silver microspheres. The detection limit for BPA is as low as 10?9 mol·L?1.
Graphical abstract Schematic illustration of the preparation of silver microspheres coated with a molecularly imprinted polymer (Ag@MIPs) for detecting bisphenol A (BPA) by surface enhanced Raman scattering (SERS).
The authors have prepared a super-hydrophilic polymer consisting of a poly-polyhedral oligomeric silsesquioxane (POSS)-formaldehyde (PPF) composite. The polymerization process does not require a catalyst and results in a material with excellent hydrophilic properties and abundant functional groups. The PFF composite, even if not chemically modified, can selectively bind glycoproteins due to strong hydrophilic interactions. It is shown that glycoproteins can be selectively captured by the composite that has a binding capacity as large as 542 mg g?1 for the model protein ovalbumin. The PPF was applied to the selective capture and isolation of ovalbumin from complex biological samples.
Graphical abstract Super-hydrophilic poly-polyhedral oligomeric silsesquioxane formaldehyde (PPF) is prepared via a catalyst-free polymerization route. PPF exhibits high capturing and adsorption selectivity towards glycoproteins due to its strong hydrophilic interaction with glycan groups. Favorable capturing capacity is also achieved.
An inorganic-organic hybrid monolith incorporated with stellated mesoporous silica nanoparticles (SMSNs) was prepared. Using binary solvents, deep eutectic solvents and room temperature ionic liquids, an SMSN-incorporated poly(butyl methacrylate-co-ethylene glycol dimethacrylate) monolith demonstrated uniform structure with good column permeability. A systematic investigation of preparation parameter was performed, including SMSN content, crosslinking monomer content, and the component of binary solvent. The optimized monoliths were characterized by field emission scanning electron microscopy, transmission electron microscopy, area scanning energy dispersive spectrometry, and nitrogen adsorption. Column performance was tested by separating four groups of analytes (alkylbenzenes, anilines, naphthalenes and phenols) by capillary electrochromatography (CEC). Baseline separation of all analytes was obtained with column efficiencies of up to 266,000 plates m?1. The performance of the resulting monolith was further investigated in detail by separating mixtures of polycyclic aromatic hydrocarbons (PAHs), nonsteroidal antiinflammatory drugs (NSAIDs), and hydroxybenzoic acid isomers. Compared with the corresponding SMSN-free monolith, the CEC performance was improved by about six times. Successful extraction of PAHs and quinolones (QNs) were also performed using this capillary. Improved extraction efficiency (20.2%) for complex samples, lake water, was also found when the material was applied to solid phase microextraction of fluoranthene.
Graphical abstract A poly(butyl methacrylate-co-ethylene glycol dimethacrylate) monolith incorporated with stellated mesoporous silica nanoparticles was prepared. It demonstrated column efficiency up to 266,000 plates m?1 in capillary electrochromatography and ability as solid phase microextraction for organic small molecules with good column permeability.
We report on a highly sensitive competitive immunoassay for the mycotoxin Ochratoxin (OTA) using magnetic silica nanoparticles (NPs) fluorescently labeled with rhodamine 123 (Rho123) as signal intensifier. The method is based on the measurement of fluorescence resonance energy transfer (FRET) that occurs from CdTe quantum dots covered with anti-OTA antibody to the dye Rho123 on the surface of the NPs. The immunoreaction between anti-OTA antibody and OTA brings the fluorophore (acting as the acceptor) in close proximity of the QDs (acting as the donor), and this causes FRET to occur upon photo-excitation of the QDs. The size and polydispersity of the silica coated magnetic NPs was studied via TEM. The method has a detection limit of 0.8 pg of OTA per mL. It was applied to the determination of OTA in spiked human serum. A linear relationship is found between the increase in the fluorescence intensity of Rho 123 at 580 nm and the concentration of OTA in spiked samples over the 8 to 48 pg?mL?1 concentration range. This highly sensitive homogeneous competitive detection scheme is simple, rapid and efficient. It does not require multiple separation steps and excessive washing.
Graphical abstract Following photoexcitation of immobilized quantum dots (QDs), FRET occurs between the QDs and Rhodamine 123. The close proximity of Rho 123 and the magnetic silica core/shell particles leads to strongly intensified emission to result in an assay for Ochratoxin A that has a detection limit as low as 0.8 pg?mL-1
This review (with 35 references) summarizes the various strategies used in biosensors for galactose, and their analytical performance. A brief comparison of the enzyme immobilization methods employed and the analytical performance characteristics of a range of galactose biosensors are first summarized in tabular form and then described in detail. Selected examples have been included to demonstrate the various applications of these biosensors to real samples. Following an introduction into the field that covers the significance of sensing galactose in various fields, the review covers biosensors based on the use of galactose oxidase, with a discussion of methods for their immobilization (via cross-linking, adsorption, covalent bonding and entrapment). This is followed by a short section on biosensors based on the use of galactose dehydrogenase. The conclusion section summarizes the state of the art and addresses current challenges.
Graphical abstract Fabrication of a disposable screen-printed (a) electrochemical galactose biosensor (b) for real sample analysis and a dummy biosensor (c) for compensating the effect of interferences
A zirconium(IV)-based metal organic framework (Zr-MOF) was deposited on polydopamine-coated silica microspheres to form microspheres of type SiO2@PDA@Zr-MOF. These were packed into capillary columns for enrichment of phosphopeptides. The column was off-line coupled to both matrix-assisted laser desorption/ionization time of flight mass spectrometry and LC-ESI-MS/MS. The method has a detection limit as low as 4 fmol of β-casein digest and a selectivity as high as 1:1000 (molar ratio of β-casein and BSA digest). It was applied to the analysis of human saliva. In total, 240 endogenous phosphopeptides were identified in only 25 μL human saliva.
Graphical abstract A zirconium-based metal organic framework (Zr-MOF) was modified outside of polydopamine-coated silica microspheres to form microspheres named SiO2@PDA@Zr-MOF. Then they were packed in capillary columns for selective enrichment of phosphopeptides via interaction between Zr-O clusters and phosphate groups. The pre-concentration resulted in a better detection of phosphopeptides by mass spectrometry. Tris: Tris(hydroxymethyl)aminomethane; DMF: Dimethyl Formamide; Zr-MOF: Zirconium(IV)-organic framework; MOAC: Metal oxide affinity chromatography.
The authors describe an electrochemical DNA nanosensor based on the use of single gold nanowire electrodes (AuNWEs). The probe DNA is immobilized on the AuNWE via Au-S bonds that are formed between thiol-terminated DNA and the gold surface. Single AuNWEs were prepared by an improved laser-assisted pulling method and hydrofluoric acid etching. The nanoelectrodes were characterized by cyclic voltammetry and COMSOL simulation. Square wave voltammetry was used to monitor the DNA hybridization event between probe DNA and target DNA by using Methylene Blue (MB) as an intercalator of dsDNA. Under optimal conditions, the peak current for MB (best measured at a potential of ?0.2 V vs. Ag/AgCl) increases linearly with the logarithm of the analyte concentration in the 1.0 f. to 10 nM range, with a 0.48 fmM detection limit at an S/N ratio of 3. The assay is highly selective, reproducible and stable. Considering the small overall dimensions and high sensitivity, this nanoelectrode potentially can be applied to in-vivo sensing of DNA inside living cells
Graphical abstract Schematic presentation of an electrochemical DNA nanosensor using single gold nanowire electrodes and based on the interaction of thiol-terminated DNA and gold surface. It was used to detect complementary DNA with high selectivity and sensitivity.
Carbon dots derivatized from N-(β-aminoethyl)-γ-aminopropyl-methyldimethoxysilane (AEAPMS) were coated onto silica microparticles. These particles (Sil-CDs) are shown to be an excellent stationary phase for use in hydrophilic interaction chromatography. Analytes including sulfonamides, nucleosides and bases, flavones and amino acids can be well separated on this stationary phase. Compared to a silica stationary phase functionalized with AEAPMS only, the Sil-CDs show enhanced separation performance. The selectivity factors of three nucleosides and bases (1.02–1.09) and four sulfonamides (1.04–1.11) on AEAPMS functionalized silica stationary phase were improved to 1.10–1.20 and 1.13–1.15 respectively on Sil-CDs stationary phase. This is attributed to the higher number of surface functional groups due to the introduction of carbon dots. The successful application of the Sil-CDs stationary phase highlights the potential of carbon dots as a modified material in chromatography.
Graphical Abstract Schematic presentation of the preparation of silanized carbon dots coated onto silica microparticles. The material represents a new stationary phase for hydrophilic interaction chromatography. It shows improved separation performance compared to a silane-only functionalized silica stationary phase.
A facile, one-pot green method is presented for the preparation of water-soluble luminescent copper nanoclusters (Cu-NCs) from copper dichloride and cysteine as the precursor and stabilizer, respectively. The Cu-NCs are characterized by high resolution transmission electron microscopy, X-ray photoelectron spectroscopy, fluorescence, UV–Vis, and Raman spectroscopy. The Cu-NCs have an average size of 3.5 nm and are stable in aqueous solution at least for 2 weeks. Under photo excitation with 365 nm light, the Cu-NCs display strong green fluorescence with the maximum of emission at 490 nm and a quantum yield of 5.6 %. Fluorescence is quenched by Cr(VI) ion, and this effect was exploited to develop a highly selective method for the determination of Cr(VI). The detection limit of this probe is as low as 43 nM.
Graphical Abstract A facile, one-pot, “green” synthetic route was developed for preparing water-soluble luminescent copper nanoclusters (CuNCs) by using copper chloride and cysteine as the precursor and stabilizer, respectively. Their fluorescence is quenched by Cr(VI) ion, and this is exploited in a sensitive assay for Cr(VI) ions.
The authors describe an SPR sensor chip coated with gold nanoparticles (AuNPs) that enables highly sensitive determination of genetically modified (GM) crops. Detection is based on localized surface plasmon resonance (LSPR) with its known sensitivity to even minute changes in refractive index. The device consists of a halogen light source, a light detector, and a cuvette cell that contains a sensor chip coated with AuNPs. It is operated in the transmission mode of the optical path to enhance the plasmonic signal. The sample solution containing target DNA (e.g. from the GM crop) is introduced into the cuvette with the sensor chip whose surface was functionalized with a capture DNA. Following a 30-min hybridization, the changes of the signal are recorded at 540 nm. The chip responds to target DNA in the 1 to 100 nM concentration range and has a 1 nM detection limit. Features of this sensor chip include a short reaction time, ease of handling, and portability, and this enables on-site detection and in-situ testing.
Graphical abstract A localized surface plasmon resonance (LSPR)-based nanoplasmonic spectroscopic device enabling a highly sensitive biosensor is developed for the detection of genetically modified (GM) DNA founded in Roundup Ready (RR) soybean.
A photoelectrochemical (PEC) aptasensor for the highly sensitive and specific detection of thrombin is described. This aptasensor is based on an indium tin oxide (ITO) support that is covered with carbon quantum dot (CQD)-sensitized TiO2 and acts as a photoactive matrix. The ITO/TiO2/CQD electrode was prepared by impregnation assembly. It displays an enhanced and steady photocurrent response under irradiation by visible light. A carboxyl-functionalized thrombin-binding aptamer was covalently immobilized on the modified ITO to obtain a PEC aptasensor whose photocurrent decreases with increasing concentration of thrombin. Under 420 nm irradiation at a bias voltage of 0 V, the aptasensor has a linear response in the 1.0 to 250 pM thrombin concentration range, with a 0.83 pM detection limit. Conceivably, this approach can be extended to numerous other PEC aptasensors for the detection of targets for which appropriate aptamers are available.
Graphical abstract Schematic of a PEC aptasensor for thrombin. It is based on the use of CQD as the sensitizer, TiO2/CQDs as the photoactive matrix, and the thrombin aptamer as the recognition element.
A gold(III)-imprinted thiocyanato-functionalized silica network of type SBA-15 was prepared by co-condensation of tetraethoxysilane (TEOS) with thiocyanatopropyltriethoxysilane (TCTES) in the presence of Pluronic123 and Au(III) ions. Compared to the non-imprinted material, the imprint has a higher selectivity and adsorption capacity for Au(III). The maximum static adsorption capacity for Au(III) is 475 mg·g?1 for the ion-imprinted, and 62 mg·g?1 for the non-imprinted sorbent. The imprint was applied to the sorption of Au(III) from digested geological samples prior to its determination by graphite furnace atomic absorption spectrometry. Adsorption is fast and does not substantially prolong the analytical procedure. Under optimum conditions, the detection limit for Au(III) is 2 ng·g?1. The method was validated by analyzing certified reference materials, and results were in good agreement with certified values. The procedure was successfully applied to the separation and determination of gold in complex geological samples.
Graphical abstract Schematic presentation of the preparation of ion-imprinted thiocyanato-functionalized mesoporous silica and its application for the preconcentration of gold from digested soils before its determination by slurry sampling graphite furnace atomic absorption spectrometry (GF AAS).
A nanocomposite modified with dibenzo-18-crown-6 was synthesized and applied as a new sorbent for the preconcentration of thallium(I) via ultrasound assisted-solid phase extraction. This extraction step was combined with electrothermal atomic absorption spectrometry to determine ultra-trace amounts of thallium(I). The nanocomposite was characterized by Fourier transform infrared spectroscopy, X-ray diffraction spectrometry, field emission scanning electron microscopy and transmission electron microscopy. Under the optimized conditions, a dynamic linear range from 7.0 to 435 ng L?1, a detection limit of 1.8 ng L?1 and a quantification limit of 6.0 ng L?1 were obtained. Also, the intra- and inter-day relative standard deviations for 20.0 ng mL?1 Tl(I) were calculated as ±4.8% and ±5.1%, respectively. The adsorbent was applied to the determination of thallium(I) in the environmental, biological and standard samples with satisfactory results.
Graphical abstract A magnetic nanocomposite was synthesized as adsorbent from halloysite nanotubes and a crown ether. Tl(I) ions were extracted selectively and determined by electrothermal atomic absorption spectrometry.
An aptamer based assay is described for the colorimetric detection of adenosine. The presence of adenosine triggers the deformation of hairpin DNA oligonucleotide (HP1) containing adenosine aptamer and then hybridizes another unlabeled hairpin DNA oligonucleotide (HP2). This leads to the formation of a double strand with a blunt 3′ terminal. After exonuclease III (Exo III)-assisted degradation, the guanine-rich strand (GRS) is released from HP2. Hence, the adenosine-HP1 complex is released to the solution where it can hybridize another HP2 and initiate many cycles of the digestion reaction with the assistance of Exo III. This leads to the generation of a large number of GRS strands after multiple cycles. The GRS stabilize the red AuNPs against aggregation in the presence of potassium ions. If, however, GRS forms a G-quadruplex, it loses its ability to protect gold nanoparticles (AuNPs) from salt-induced AuNP aggregation. Therefore, the color of the solution changes from red to blue which can be visually observed. This colorimetric assay has a 0.13 nM detection limit and a wide linear range that extends from 5 nM to 1 μM.
Graphical abstract Schematic presentation of a colorimetric aptamer biosensor for adenosine detection based on DNA cycling amplification and salt-induced aggregation of gold nanoparticles.
Copper nanoclusters (Cu-NCs) were prepared by reducing CuCl2 with ascorbic acid in the presence of the short peptide template Cys-Cys-Cys-Asp-Leu. They were characterized by UV-vis absorption and fluorescence spectroscopy, transmission electron microscopy and X-ray photoelectron spectroscopy. The Cu-NCs have a size of ~2 nm, can be well dispersed in water and are photostable. Their fluorescence (peaking at 425 nm under 365-nm excitation) is quenched by Fe(III) ions. Based on this finding, a sensitive and selective fluorescence assay for the detection of Fe(III) was developed. Under optimized conditions and a pH value of 2.0, the assay displays a linear response in the 0.05 to 30 μM Fe(III) concentration range, with a detection limit of 20 nM based on an S/N ratio of 3. The assay was successfully applied to the determination of Fe(III) in spiked human serum where is gave recoveries that ranged from 96.2 % to 98.3 %.
Graphical abstract Copper nanoclusters (Cu-NCs) were prepared by reducing CuCl2 with ascorbic acid with peptide as the template. The fluorescence of Cu-NCs is quenched by Fe(III) ions with a linear response in the 0.05 to 30 μM of Fe(III) concentration range.
The authors describe a fluorometric aptamer based assay for adenosine triphosphate (ATP). It is based on the use of carbon dots (CDs) and graphene oxide (GO). The resultant CD-aptamer is adsorbed on the surface of GO via π-stacking and hydrophobic interaction, and the fluorescence of CD-aptamer is quenched via fluorescence resonance energy transfer (FRET) between CDs and GO. If ATP is present, it will bind to the aptamer and the CD-aptamer will be desorbed from GO. This will suppress FRET and the fluorescence of the CDs is restored. Under the optimal conditions and at typical excitation/emission wavelengths of 358/455 nm, the assay has a 80 pM detection limit and a linear range that extends from 0.10 to 5.0 nM concentrations of ATP. The method was successfully applied to the determination of ATP in yogurt samples. This method can also be conceivably applied to the detection of other analytes for which appropriate aptamers are available.
Graphical abstract Schematic of a novel fluorometric ATP assay based on the fluorescence resonance energy transfer (FRET) between aptamer modified carbon dots (CD-aptamer) and graphene oxide (GO). CD-aptamer was used as the energy donor and molecular recognition probe, and GO acted as energy acceptor. This assay exhibits high sensitivity and selectivity with a detection limit as low as 80 pM.
