Magnetic Resonance Study of the Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> Doped with Manganese

Crystals of 3D topological insulators, bismuth telluride Bi₂Te₃, doped with manganese were studied using electron spin resonance (ESR) spectroscopy together with the SQUID magnetometry, transport measurements, and X-ray characterization. The obtained ESR data, such as the temperature and the angular dependence of the resonance field, reveal the specific critical behavior and confirm the ferromagnetic ordering of Mn spins even at modest doping. In addition to the studies of the critical behavior of diluted ferromagnet Bi_2?x Mn _x Te_3, we also discuss the effects of the limited solubility of Mn ions giving rise to microscopic inclusions of the spurious magnetic phases which were revealed using ESR technique.     

Photoaccumulating film systems based on TiO<Subscript>2</Subscript>/MoO<Subscript>3</Subscript> and TiO<Subscript>2</Subscript>/MoO<Subscript>3</Subscript>:V<Subscript>2</Subscript>O<Subscript>5</Subscript> nanoheterostructures

The thin-film photocatalysts TiO₂/MoO₃ and TiO₂/MoO₃:V₂O₅ obtained by a combination of sol–gel and sintering techniques were studied using the photooxidation of probing dyes, EPR spectroscopy, X-ray diffraction analysis, and electron microscopy. It was shown that due to charge accumulation caused by UV irradiation, these photocatalysts retain their oxidative activity and ability for self-sterilization in the dark for a long time after irradiation was terminated (up to 5 h for TiO₂/MoO₃:V₂O₅).     

Photogreying of TiO<Subscript>2</Subscript> nanoparticles

Photogreying, the change in brightness on UV irradiation in the absence of oxygen, of TiO₂ nanoparticulate dispersions is shown to depend on the nature of the liquid, consistent with a surface reaction. Measurements on a series of TiO₂ particles (mainly 75×10 nm) dispersed in, e.g., alkyl benzoate correlate well with those on the same TiO₂’s dispersed in a second liquid (e.g. propan-2-ol). Photogreying in propan-2-ol is paralleled by photocatalytic-oxidation activity, indicating a common origin – UV-generation of charge carriers. Further, photogreying parallels Ti³⁺ formation. Hence, although appearance and the visible spectra of photogreyed particles both differ from those of Ti³⁺ in ≤10 nm colloidal TiO₂, we suggest that photogreying is caused by capture of UV excited electrons to form Ti³⁺. Surface treatment reduces photogreying, and we speculate that differences between uncoated samples reflect differences in the number of potentially reducible Ti’s.     

Methane sensor based on SnO<Subscript>2</Subscript>/In<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> nanostructure

Two sets of samples of SnO₂/In₂O₃/TiO₂ system have been fabricated with different concentrations of component materials. In the first set TiO₂ with rutile structure was used, while in the second set it has the structure of anatase. Thin films (up to 50 nm) of obtained mixtures were deposited. Their sensitivity and selectivity with respect to methane (CH4) were studied. Nanostructure on the basis of 70%SnO₂ — 10%In₂O₃ — 20%TiO₂(anatase) exhibits sufficient sensitivity to methane.     

Nanocrystalline Li<Subscript>2</Subscript>TiO<Subscript>3</Subscript> electrodes for supercapattery application

Nanocrystalline Li₂TiO₃ was successfully synthesized using solid-state reaction method. The microstructural and electrochemical properties of the prepared material are systematically characterized. The X-ray diffraction pattern of the prepared material exhibits predominant (002) orientation related to the monoclinic structure with C2/c space group. HRTEM images and SAED analysis reveal the well-developed nanostructured particles with average size of ～40 nm. The electrochemical properties of the prepared sample are carried out using cyclic voltammetry (CV) and chronopotentiometry (CP) using Pt//Li₂TiO₃ cell in 1 mol L^?1 Li₂SO₄ aqueous electrolyte. The Li₂TiO₃ electrode exhibits a specific discharge capacity of 122 mAh g^?1; it can be used as anode in Li battery within the potential window 0.0–1.0 V, while investigated as a supercapacitor electrode, it delivers a specific capacitance of 317 F g^?1 at a current density of 1 mA g^?1 within the potential range ?0.4 to +0.4 V. The demonstration of both anodic and supercapacitor behavior concludes that the nanocrystalline Li₂TiO₃ is a suitable electrode material for supercapattery application.     

Structural properties of amorphous TiO<Subscript>2</Subscript> nanoparticles

Structural properties of amorphous TiO₂ spherical nanoparticles have been studied in models with different sizes of 2 nm, 3 nm, 4 nm and 5 nm under non-periodic boundary conditions. We use the pairwise interatomic potentials proposed by Matsui and Akaogi. Models have been obtained by cooling from the melt via molecular dynamics (MD) simulation. Structural properties of an amorphous nanoparticle obtained at 350 K have been analyzed in detail through the partial radial distribution functions (PRDFs), coordination number distributions, bond-angle distributions and interatomic distances. Moreover, we show the radial density profile in a nanoparticle. Calculations show that size effects on structure of a model are significant and that if the size is larger than 3 nm, amorphous TiO₂ nanoparticles have a distorted octahedral network structure with the mean coordination number Z_Ti-O ≈6.0 and Z_O-Ti ≈3.0 like those observed in the bulk. Surface structure and surface energy of nanoparticles have been obtained and presented.     

Magnetic phases in UNi<Subscript>2</Subscript>Si<Subscript>2</Subscript>

The tetragonal compound UNi₂Si₂ exhibits in zero magnetic field three different antiferromagnetic phases belowT _N =124 K. They are formed by ferromagnetic basal planes, which are antiferromagnetically coupled along thec-axis with the propagation vectorq=(0, 0, q _z ). Two additional order-order magnetic phase transitions are observed below T _N , namely atT ₁=108 K and T ₂=40 K in zero magnetic field. All three phases exhibit strong uniaxial anisotropy confining the U moments to a direction parallel to the c-axis. UNi₂Si₂ single crystals were studied in detail by measuring bulk thermodynamic properties, such as thermal expansion, resistivity, susceptibility, and specific heat. A microscopic study using neutron diffraction was performed in magnetic fields up to 14.5 T parallel to the c-axis, and a complex magnetic phase diagram has been determined. Here, we present the analysis of specific-heat data measured in magnetic fields up to 14 T compared with the results of the neutron-diffraction study and with other thermodynamic properties of UNi₂Si₂.     

Anatase TiO<Subscript>2</Subscript> nanoparticles for lithium-ion batteries

Anatase TiO₂ nanoparticles were prepared by a simple sol-gel method at moderate temperature. X-ray powder diffraction (XRD) and Raman spectroscopy revealed the exclusive presence of anatase TiO₂ without impurities such as rutile or brookite TiO₂. Thermogravimetric analysis confirmed the formation of TiO₂ at about 400 °C. Particle size of about 20 nm observed by transmission electron microscopy matches well with the dimension of crystallites calculated from XRD. The electrochemical tests of the sol-gel-prepared anatase TiO₂ show promising results as electrode for lithium-ion batteries with a stable specific capacity of 174 mAh g^?1 after 30 cycles at C/10 rate. The results show that improvement of the electrochemical properties of TiO₂ to reach the performance required for use as an electrode for lithium-ion batteries requires not only nanosized porous particles but also a morphology that prevents the self-aggregation of the particles during cycling.     

Synthesis and nanostructural investigation of TiO<Subscript>2</Subscript> nanorods doped by SiO<Subscript>2</Subscript>

TiO₂ Nano rods can be used as dye-sensitized solar cells, various sensors and photocatalysts. These nanorods are synthesized by a hydrothermal corrosion process in NaOH solution at 200°C using TiO₂ powder as the source material. In the present work, the synthesis of TiO₂ nanorods in anatase, rutile and Ti₇O₁₃ phases and synthesis of TiO₂ nanorods by incorporating SiO₂ dopant, using the sol–gel method and alkaline corrosion are reported. The morphologies and crystal structures of the TiO₂ nanorods are characterized using field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD) study. The obtained results show not only an aggregation structure at high calcination temperatures with spherical particles but also Ti–O–Si bonds having four-fold coordination with oxygen in SiO^4 −.     

Carboxylic species adsorption on TiO<Subscript>2</Subscript> nanoparticles

We present the results of a quantum-chemical study of the interface formed by titania nanoparticles and a set of carboxylic moieties, namely, benzoic and bi-isonicotinic acids and a tris-(2, 2′-dcbipyridine) Fe (II) complex placed on the surface of either rutile or anatase polymorphs. The calculations were performed in the spd basis using semiempirical quantum-chemical codes, both sequential and parallel. The results are mainly addressed to the geometry optimization of the adsorbed molecules on the surface, as well as to the adsorption mechanism and the energy of adsorption. The text was submitted by the authors in English.     

Magnetic properties of Pb<Subscript>2</Subscript>Fe<Subscript>2</Subscript>Ge<Subscript>2</Subscript>O<Subscript>9</Subscript> single crystals

Single crystals of Pb₂Fe₂Ge₂O₉ have been grown. They were subjected to X-ray diffraction, magnetic, neutron diffraction, Mössbauer and spin resonance studies. It has been established that Pb₂Fe₂Ge₂O₉ is a weak ferromagnet with a Néel temperature T _N = 46 K, and the exchange and spin-flop transition fields have been estimated. It has been demonstrated that the weak ferromagnetic moment is actually the result of the single-ion anisotropy axes for the magnetic moments of different magnetic sublattices being not collinear.     

Thermostable photocatalytically active TiO<Subscript>2</Subscript> anatase nanoparticles

Anatase is the low-temperature (300–550 °C) crystalline polymorph of TiO₂ and it transforms to rutile upon heating. For applications utilizing the photocatalytic properties of nanoscale anatase at elevated temperatures (over 600 °C) the issue of phase stabilisation is of major interest. In this study, binary TiO₂/SiO₂ particles were synthesized by a flame aerosol process with TiCl₄ and SiCl₄ as precursors. The theoretical Si/Ti ratio was varied in the range of 0.7–1.3 mol/mol. The synthesized TiO₂/SiO₂ samples were heat treated at 900 and 1,000 °C for 3 h to determine the thermostability of anatase. Pyrogenic TiO₂ P25 (from Evonik/Degussa, Germany) widely applied as photocatalyst was used as non-thermostabilized reference material for comparison of photocatalytic activity of powders. Both the non-calcinated and calcinated powders were characterized by means of XRD, TEM and BET. Photocatalytic activity was examined with dichloroacetic acid (DCA) chosen as a model compound. It was found that SiO₂ stabilized the material retarding the collapse of catalyst surface area during calcination. The weighted anatase content of 85% remains completely unchanged even after calcination at 1,000 °C. The presence of SiO₂ layer/bridge as spacer between TiO₂ particles freezes the grain growth: the average crystallite size increased negligibly from 17 to 18 nm even during the calcination at 1,000 °C. Due to the stabilizing effect of SiO₂ the titania nanoparticles calcinated at 900 and 1,000 °C show significant photocatalytic activity. Furthermore, the increase in photocatalytic activity with calcination temperature indicates that the titania surface becomes more accessible either due to intensified cracking of the SiO₂ layer or due to enhanced transport of SiO₂ into the necks thus releasing additional titania surface.     

Impedance spectroscopy study of Na<Subscript>1/2</Subscript>Sm<Subscript>1/2</Subscript>TiO<Subscript>3</Subscript> ceramic

Complex impedance analysis of a valence-compensated perovskite ceramic oxide Na_1/2Sm_1/2TiO₃, prepared by a mixed oxide (solid-state reaction) method, has been carried out. The formation of single-phase material was confirmed by X-ray diffraction studies, and it was found to be an orthorhombic phase at room temperature. In a scanning electron microscope, grains separated by well-defined boundaries are visible, which is in good agreement with that of impedance analysis. Alternating current impedance measurements were made over a wide temperature range (31–400 °C) in an air atmosphere. Complex impedance and modulus plots helped to separate out the contributions of grain and grain boundaries to the overall polarization or electrical behavior. The physical structure of the samples was visualized most prominently at higher temperatures (275 °C) from the Nyquist plots showing inter- and intragranular impedance present in the material. The frequency dependence of electrical data is also analyzed in the framework of the conductivity and modulus formalisms. The bulk resistance, evaluated from the impedance spectrum, was observed to decrease with rise in temperature, showing a typical negative temperature coefficient of resistance-type behavior like that of semiconductors. The modulus mechanism indicates the non-Debye type of conductivity relaxation in the materials, which is supported by the impedance data. PACS 77.22.Ch; 77.22.Ej; 77.22.Gm; 77.22.Jp; 77.84.Bw     

Electronic Structure of OR-AgInS<Subscript>2</Subscript> and TiO<Subscript>2</Subscript> Crystals and Its Differential Characteristics

The electronic structures of orthorhombic silver–indium sulfide and rutile titanium oxide were calculated within the framework of density functional theory using the basis of numerical pseudoatomic orbitals in the LDA and GGA approximations. The features of their electron energy spectra and the character of chemical bonds were considered. The comparative analysis of obtained bandgap widths and effective masses determined for heavy electrons and holes in the Brillouin zone center on the basis of analytical derivatives of one-electron energies was performed.     

Magnetism and optical properties of nanocrystalline Cu<Subscript>2</Subscript>O and TiO<Subscript>2</Subscript> powders

The optical spectra of Cu₂O and TiO₂ nanopowders have been studied, which contain information about structural defects and are of interest in the search for optimum regimes providing the synthesis of ferromagnetic nanocrystals with Curie temperatures above room temperature.     

Aggregation of TiO<Subscript>2</Subscript> nanocrystals in water solutions

Narrow fractions of TiO₂ nanocrystals have been isolated from polydisperse hydrosols using stepped coagulation by strong acids. The phase composition, sizes, and shape of the isolated nanocrystals are characterized. The thermal behavior of the fractions is compared. The slow aggregation of anatase nanocrystals in KCl water solutions at different pH is investigated. A model of slow aggregation induced by electrolyte additives is proposed.