基于TiO2-Y2O3粉体催化发光甲醇气体传感器的研究

发现当甲醇气体通过TiO₂-Y₂O₃ (质量比为3∶1)粉体表面时, 可被空气中的O₂催化氧化产生强烈的化学发光, 基于此研制了一种新型的甲醇气体传感器. 此传感器对甲醇的检测具有较高灵敏度和较强的选择性. 在波长490 nm处进行定量分析, 催化发光强度与甲醇浓度在一定范围内呈良好的线性关系, 其线性范围为25.74～12870 mg/m³ (r＝0.9995, n＝8); 检出限为8.58 mg/m³(信噪比＝3). 外来物质如正己烷、三氯甲烷、苯、无水乙醇、甲醛、丙酮、氨、甲苯与甲醇共存时, 除了丙酮、乙醇和氨分别引起干扰外, 苯与其它气体不干扰测定. 该传感器工作时间可持续80 h以上, 是一种长寿命的、性能稳定的气体传感器, 并成功地实现了对甲醇气体的实时在线检测.     

Enhancement of solar light photocatalytic activity of TiO2-CeO2 composite by Er3+:Y3Al5O12 in organic dye degradation

The Er³⁺:Y₃Al₅O₁₂, as an upconversion luminescence agent which is able to transform the visible part of the solar light to ultraviolet light, was prepared by nitrate-citrate sol-gel method. A novel solar light photocatalyst, Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ composite was synthesized using ultrasonic treatment. The X-ray diffraction (XRD) and scanning election microscopy (SEM) were used to characterize the structural morphology of the Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ composite. In order to evaluate the solar light photocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ composite, the Azo Fuchsine dye was used as a model organic pollutant. The progress of the degradation reaction was monitored by UV-Vis spectroscopy and ion chromatography. The key influences on the solar light photocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ were studied, such as Ti/Ce molar ratio, heat-treatment temperature and heat-treatment time. Otherwise, the effects of initial dye concentration, Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ amount, solar light irradiation time and the nature of the dye on the solar light photocatalytic degradation process were investigated. It was found that the solar light photocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ composite was superior to Er³⁺:Y₃Al₅O₁₂/TiO₂ and Er³⁺:Y₃Al₅O₁₂/CeO₂ powder in the similar conditions.     

Synthesis of Er3+:Y3Al5O12 and its effects on the solar light photocatalytic activity of TiO2–ZrO2 composite

The Er³⁺:Y₃Al₅O₁₂ as an upconversion luminescence agent, which can transform visible light into ultraviolet light, was synthesized by nitrate?Ccitrate acid and calcined method. Then, a novel photocatalyst, Er³⁺:Y₃Al₅O₁₂/TiO₂?CZrO₂, was prepared using ultrasonic dispersion and liquid boiling method. The samples were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM). In succession, the degradation process of organic dye was monitored by UV?CVis spectrum and ion chromatography for verifying the photocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂?CZrO₂. The influences on its photocatalytic activity such as Ti/Zr molar ratio, heat-treated temperature, and time were studied. In addition, the influences of initial concentration, Er³⁺:Y₃Al₅O₁₂/TiO₂?CZrO₂ amount, solar light irradiation time, and organic dye category on the photocatalytic degradation efficiency were also investigated. It was found the photocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂?CZrO₂ was superior to Er³⁺:Y₃Al₅O₁₂/TiO₂ and Er³⁺:Y₃Al₅O₁₂/ZrO₂. Therefore, the Er³⁺:Y₃Al₅O₁₂/TiO₂?CZrO₂ is a useful photocatalytic material for the wastewater treatment duo to efficient utilization of solar light.     

Preparation of Er3+:Y3Al5O12/TiO2 composite film and influence of layer number and layer sequence on the visible-light photocatalytic activity

In this work, the Er³⁺:Y₃Al₅O₁₂ as up-conversion luminescence agent was mixed with TiO₂ and the corresponding Er³⁺:Y₃Al₅O₁₂/TiO₂ composite films were prepared on the one-sided surface of treated sheet glass through sol-gel dip-coating method. The prepared Er³⁺:Y₃Al₅O₁₂/TiO₂ composite films were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). Their photocatalytic activities were examined through the degradation of some organic dyes under visible-light irradiation. The degradation process of organic dyes was monitored by UV-Vis spectrophotometer. Furthermore, some main influence factors on the visible-light photocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂ composite film such as heat-treatment temperature and heat-treatment time were studied. The results indicate that three layer Er³⁺:Y₃Al₅O₁₂/TiO₂ composite films with one Er³⁺:Y₃Al₅O₁₂/TiO₂ composite film (as first layer close to sheet glass) and two pure TiO₂ film (as second and third layers) display a higher visible-light photocatalytic activity during photocatalytic degradation of Azo Fuchsine. In addition, the results showed that the visible-light photocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂ composite film related to the layer number and layer sequence on the sheet glass. Perhaps, the research results may offer some meaningful references for developing solar energy continuous flow wastewater treatment reactor.     

Application of TiO2/Er3+:Y3Al5O12 composite to photo-degrade acid red B dye under sun light irradiation

In this work, an upconversion luminescence agent, Er³⁺:Y₃Al₅O₁₂, was synthesized and its absorption and fluorescent spectra was determined. By calculation, the upconversion efficiency of the emission peak at 320 nm was estimated to be about 3.4%. And then, TiO₂/Er³⁺:Y₃Al₅O¹² composite was prepared by simple ultrasonic dispersion and liquids boil methods. The obtained composite was characterized by X-ray diffrac-tion. The effect of TiO₂/Er³⁺:Y₃Al₅O₁₂ composite with different Er³⁺:Y₃Al₅O₁₂ doping amount, heat-treated temperature and heat-treated time on photodegradation of acid red B under sun light was investigated in detail. It was found that the photocatalytic activity of TiO₂/Er³⁺:Y₃Al₅O₁₂ composite was much higher than that for the similar system with only TiO₂ powder. These results support the usefulness of TiO₂/Er³⁺:Y₃Al₅O₁₂ composite in the process of photodegrading dye wastewater and using the sun light.     

Preparation of high surface area ZrO2 and ZrO2-Y2O3 from the alkoxide

In order to obtain a catalyst support with a high surface area, ZrO₂ and ZrO₂-Y₂O₃ were prepared by the hydrolytic decomposition of the corresponding isopropoxide dissolved in benzene. The hydrolysis was carried out at 80°C using an excess amount of distilled water in flowing dry nitrogen. The precipitates thus obtained were dried at 100°C followed by calcination at 500°C in air or nitrogen for 1 h. The specific surface areas for both of the ZrO₂ and ZrO₂-Y₂O₃ increased with increasing amount of water added for hydrolysis, and the surface areas for ZrO₂-Y₂O₃ increased with increasing yttrium content. A ZrO₂ having a surface area of 130 m²/g was produced, and a stabilized tetragonal ZrO₂ with 15 mol% Y³⁺ having a surface area of 200 m²/g was produced. Furthermore, despite the difference in the ZrO₂ and ZrO₂-Y₂O₃ crystal structures, the lattice-strain of ZrO₂ has been unequivocally related to the surface area.     

固定床反应器上挤条小晶粒TS-1催化丙烯环氧化反应

采用纳米TS-1母液作为晶种, 在四丙基溴化铵(TPABr)-乙胺廉价水热体系中, 合成出晶粒尺寸为600 nm×400 nm×250 nm的小晶粒钛硅分子筛(TS-1), 用挤条法将其成型, 得到的挤条小晶粒TS-1被用于催化固定床反应器中的丙烯环氧化反应. 采用X射线衍射(XRD)光谱, 傅里叶变换红外(FT-IR)光谱, 紫外-可见(UV-Vis)漫反射光谱及氮气物理吸附对挤条成型的小晶粒TS-1进行表征, 并对丙烯环氧化的最优反应条件进行考察. 其中所考察的条件包括: 反应温度, 压力, 丙烯/H₂O₂摩尔比(n(C₃H₆)/n(H₂O₂)), 丙烯、甲醇及H₂O₂的质量空速(WHSV), 以及NH₃·H₂O浓度. 在所考察的范围内, 温度对环氧丙烷(PO)收率的影响较小, 当反应压力为2.0 MPa, n(C₃H₆)/n(H₂O₂)为4时, 可以得到最高的PO收率. 当丙烯、甲醇及H₂O₂的空速分别为0.93、2.5及0.25 h^-1时, PO在产物中的含量最高. 较低的NH₃·H₂O浓度对高PO收率更有利. 在优化的反应条件下, 对比不同晶粒大小TS-1的催化性能, 并考察了挤条小晶粒TS-1的长期运转性能, 连续反应1000 h, H₂O₂转化率及PO选择性仍能维持在95%以上.     

Synthesis, characterization and catalytic performance of a novel magnetic SO42?-Y2O3-Fe3O4-ZrO2 solid acid catalyst

A novel magnetic SO₄ ²⁻-Y₂O₃-Fe₃O₄-ZrO₂ solid acid catalyst was prepared by the co-precipitation method. The results revealed that the introduction of Y₂O₃ improved markedly the thermal stability of tetragonal zirconia. The catalyst exhibited high catalytic activity and stability in cyclohexanone condensation.     

基于 H2/O2 等离子体和钛硅沸石的丙烯气相环氧化方法

 将 H₂/O₂ 非平衡等离子体现场产生的气态 H₂O₂和丙烯与耦合反应器中钛硅沸石 TS-1 直接接触, 实现了丙烯气相环氧化反应. 结果表明, 非平衡等离子体生成气态 H₂O₂ 的速率由介质阻挡放电的输入功率决定, 环氧丙烷的生成速率和选择性取决于钛硅沸石催化剂和反应条件. 在 H₂ 和 O₂ 进料流量分别为 170 和 8 ml/min, 介质阻挡放电输入功率为 3.5 W, 环氧化反应温度为 110 ^oC, 丙烯进料量为 18 ml/min, 催化剂用量为 0.8 g 的条件下, 生成环氧丙烷产率达 246.9 g/(kg•h)、环氧丙烷选择性和 H₂O₂ 有效利用率分别为 95.4% 和 36.1%, 反应 36 h 内未见催化剂失活.     

Electrodeposition of TiO2 Nanoparticles on Multiwalled Carbon Nanotube Arrays for Hydrogen Peroxide Sensing

In this work, an amperometric H₂O₂ sensor based on TiO₂/MWCNTs electrode is reported. TiO₂ nanoparticles were synthesized on vertically aligned multiwalled carbon nanotube (MWCNT) arrays by electrodeposition. The morphology of the TiO₂/MWCNTs was characterized by scanning electron microscopy (SEM). The electrochemical performance of the TiO₂/MWCNTs electrode for detection of H₂O₂ was investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and chronoamperometry. The TiO₂/MWCNTs electrode displays high electrocatalytic activity towards oxidation of H₂O₂ in 0.1 M phosphate buffer solution (PBS, pH 7.4). At an applied potential of +0.40 V, the TiO₂/MWCNTs electrode exhibits a linear dependence (R=0.998) in the H₂O₂ concentration up to 15.0×10^?3 M with a sensitivity of 13.4 μA mM^?1 and detection limit of 4.0×10^?7 M with signal/noise=3. The optimal response time is less than 5 s with addition of 1 mM H₂O₂. The TiO₂/MWCNTs electrode presents stable, high sensitivity and also exhibits fast amperometric response to the detection of H₂O₂, which is promising for the development of H₂O₂ sensor.     

EPMA of interfaces applied to the solid oxide fuel cell

Chemical interactions at the phase boundaries of materials applied for the solid oxide fuel cell (SOFC) have been studied by EPMA. The chemical reactivity at the interface of La_y-xSr_xMnO₃/ZrO₂-Y₂O₃ is dependent on the stoichiometry (y) and the Sr content (x) of the perovskite. Typical reaction products (zirconates) and a diffusion zone in the ZrO₂–Y₂O₃ have been observed. The extension of cation release (Mn) is related to the increasing chemical activity of Mn oxide in the perovskite by the Sr substitution for La. The wettability of the metal/oxide interface in the anode cermet (Ni/ZrO₂–Y₂O₃) has been found to be influenced by chemical reactions resulting from the applied reducing atmosphere with high carbon activity. The disintegration of ZrO₂–Y₂O₃ in contact with molten Ni or Ni-Ti and Ni-Cr alloys leads to the redeposition of Y₂O₃-enriched oxides and also to Zr-rich intermetallic compounds and eutectics.     

Solid solubility of Yb2Si2O7 in β-, γ- and δ-Y2Si2O7

This paper examines the structural changes with temperature and composition in the Yb₂Si₂O₇-Y₂Si₂O₇ system; members of this system are expected to form in the intergranular region of Si₃N₄ and SiC structural ceramics when sintered with the aid of Yb₂O₃ and Y₂O₃ mixtures. A set of different compositions have been synthesised using the sol-gel method to obtain a xerogel, which has been calcined at temperatures between 1300 and 1650 °C during different times. Isotherms at 1300 and 1600 °C have been analysed in detail to evaluate the solid solubility of Yb₂Si₂O₇ in β-Y₂Si₂O₇ and γ-Y₂Si₂O₇. Although Yb₂Si₂O₇ shows a unique stable polymorph (β), Yb³⁺ is able to replace Y³⁺ in γ-Y₂Si₂O₇ and δ-Y₂Si₂O₇ at high temperatures and low Yb contents. IR results confirm the total solid solubility in the system and suggest a constant SiOSi angle of 180° in the Si₂O₇ unit across the system. The temperature-composition diagram of the system, obtained from powder XRD data, is dominated by the β-RE₂Si₂O₇ polymorph, with γ-RE₂Si₂O₇ and δ-RE₂Si₂O₇ showing reduced stability fields. The diagram is in accordance with Felsche's diagram if average ionic radii are assumed for the members of the solid solution at any temperature, as long as the β-γ phase boundary is slightly shifted towards higher radii.     

Photoelectrochemical Sensor for Isoniazid: Application in Drugs Used in the Treatment of Tuberculosis

The present work describes the development of a photoelectrochemical sensor based on titanium dioxide, cadmium telluride quantum dots and the tris (2,2′-bipyridyl) ruthenium(II) chloride complex for detection of Isoniazid (INH). The Ru(bpy)₃²⁺/CdTe-QDs/TiO₂/FTO photoelectrochemical platform was characterized by scanning electrochemical microscopy, electrochemical impedance spectroscopy and amperometry. The photoelectrochemical sensor presented two linear ranges for INH concentrations ranging from 0.5 to 150 μmol L⁻¹ and 150 to 1270 μmol L⁻¹, with a theoretical detection limit of 0.02 μmol L⁻¹. The sensor was successfully applied for the determination of INH in drugs samples used in the treatment of tuberculosis.     

Nonenzymatic H2O2 Electrochemical Sensor Based on SnO2‐NPs Coated Polyethylenimine Functionalized Graphene

This paper demonstrated using polyethylenimine (PEI)‐functionalized graphene (Gr) incorporating tin oxide (SnO₂) hybrid nanocomposite as a platform for nonenzymatic H₂O₂ electrochemical sensor. The results of UV‐vis spectroscopy and X‐ray diffraction (XRD) confirmed the simultaneous formation of tin oxide (SnO₂) nanocomposite and reduction of graphene oxide (GO). Transmission electron microscopy (TEM) images showed a uniform distribution of nanometer‐sized tin oxide nanoparticles on the grapheme sheets, which could be achieved using stannous chloride (SnCl₂) complex instead of tin oxide as precursor. The electrochemical measurements, including cyclic voltammetry (CV) and amperometric performance (I‐t), showed that the PEI‐functionalized Gr supported SnO₂ (SnO₂‐PEI‐Gr) exhibited an excellent electrocatalytic activity toward the H₂O₂. The corresponding calibration curve of the current response showed a linear detection range of 9×10⁻⁶∼1.64×10⁻³ mol L⁻¹, while the limit of detection was estimated to be 1×10⁻⁶ mol L⁻¹. Electrochemical studies indicated that SnO₂ and functionalized Gr worked synergistically for the detection of H₂O₂.     

Detection of nitrogen dioxide using mixed tungsten oxide-based thick film semiconductor sensor

The thick film semiconductor sensor for NO₂ gas detection was fabricated by screen-printing method using a mixed WO₃-based as sensing material. The sensing characteristics, such as response time, response linearity, sensitivity, working range, cross sensitivity, and long-term stability were further studied by using a WO₃-based mixed with different metal oxides (SnO₂, TiO₂ and In₂O₃) and doped with noble metals (Au, Pd and Pt) as sensing materials was observed. The highest sensitivity for low concentrations (<16 mg l⁻¹) was observed using WO₃-based mixed with In₂O₃ or TiO₂. The NO₂ gas sensor showing the fastest response and recovery time (both within 2 min), good linearity (Y=0.606X+0.788 R²=0.991) for gas concentrations from 3 to 310 mg l⁻¹, low resistance (3 MΩ), high sensitivity, undesirable cross sensitivity effect and good long-term stability (at least 120 days) using WO₃-SnO₂-Au as sensing material.     

Efficiency of various semiconductor catalysts for photodegradation of Safranin-T

Semiconductor photocatalysis often leads to partial or complete mineralization of organic pollutants. In this study, photocatalytic degradation of Safranin-T, a hazardous textile dye, has been investigated using various semiconductors such as titanium dioxide (TiO₂), zinc oxide (ZnO), bismuth oxide (Bi₂O₃), cerium oxide (CeO₂), yttrium oxide (Y₂O₃), and zirconium oxide (ZrO₂). The experiments were carried out by irradiating the aqueous solution of Safranin-T containing photocatalysts with UV and air. Maximum decolorization of Safranin-T occurred with TiO₂ (99.8%), followed by ZnO (80.3%), Bi₂O₃ (57.1%), CeO₂ (13.1%), Y₂O₃ (12.2%), and ZrO₂ (10.2%). The rate of photocatalytic degradation varied with increasing concentration of Safranin-T. The equilibrium degradation data of Safranin-T by TiO₂ and ZnO were fitted to the Langmuir and Freundlich isotherm models. The Freundlich and Langmuir model showed satisfactory fit to the equilibrium degradation data for TiO₂ and ZnO, respectively. Photocatalytic degradation of Safranin-T followed pseudo second-order kinetics.     

Development of an electrochemical sensor for potassium ions based on KSr2Nb5O15 modified electrode

In the work described by this paper, we studied the development of a selective potassium ion sensor constituted of a carbon paste electrode modified (CPEM) with a novel KSr₂Nb₂O₁₅. The material KSr₂Nb₂O₁₅ is an oxide with the tetragonal tungsten bronze structure (TTB) type are in forefront both in the area of research as well as in industrial applications. The sensor response to potassium ions was linear in the concentration range 1.26 x 10^-5 at 1.62 x 10^-3 mol L^-1 (E (mV) = 32.7 + 51.1 log [K⁺]). The sensor based KSr₂Nb₂O₁₅, of the TTB-type presented very good potentiometric response, with a slope of 51.1 mV/dec (at 25 °C) and detection limit for the potassium ions of 7.27 x 10^-5 mol.L^-1.     

Sensitive Nonenzymatic Electrochemiluminescence Determination of Hydrogen Peroxide in Dental Products using a Polypyrrole/Polyluminol/Titanium Dioxide Nanocomposite

A layer-by-layer assembled of a polypyrrole and polyluminol was synthesized through the electrodeposition of pyrrole and luminol in acidic medium on a graphite electrode. The electrode was then modified by casting titanium dioxide (TiO₂) nanoparticles on its surface for enhancing electrochemiluminescence of luminol. The properties of this electrochemiluminescence sensor were studied by cyclic voltammetry, electrochemical impedance spectroscopy, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy. The results demonstrated that the modification of this electrochemiluminescence sensor shows sensitive response for the determination of hydrogen peroxide. Figures of merit include broad linearity from 1?pmol L^?1 to 4?µmol L^?1 (R²?=?0.996) with a limit of detection as low as 0.40?pmol L^?1 at a signal-to-noise ratio of three and good reproducibility with relative standard deviation of 4% for the determination of a 400?nmol L^?1 hydrogen peroxide solution (n?=?4), along with favorable long-term stability. The presence of glucose, citric acid, uric acid, dopamine, and ascorbic acid at concentrations as high as 100?nmol L^?1 of H₂O₂ did not produce any electrochemiluminescence signals, which demonstrates the selective nature of this modified electrode. The sensor was also used for the determination of H₂O₂ in mouthwash formulations and dental whitelight gels.     

Thin films of the composition 8% Y<Subscript>2</Subscript>O<Subscript>3</Subscript>–92% ZrO<Subscript>2</Subscript> (8YSZ) as gas-sensing materials for oxygen detection

The synthesis of hydrolytically active heteroligand precursors of the composition [M(O₂C₅H₇) _x ( ⁱ OC₅H₁₁) _y ] (M = Zr⁴⁺ and Y³⁺) using zirconium and yttrium acetylacetonates was investigated. It was shown that the reactivity of the obtained precursors in hydrolysis and polycondensation depends on the composition of the coordination sphere. It was studied how thin films of their solutions are applied by dip coating to the surface of Al₂O₃ substrates with platinum interdigital electrodes and a microheater. A study was made of the effect of the crystallization conditions and thickness of the oxide coatings of the composition 8 mol % Y₂O₃–ZrO₂ on their microstructure and sensor characteristics in oxygen detection.