Membrane proteins: adapting to life at the interface

A recent publication by Cravatt and colleagues which describes the structure of an integral membrane protein (FAAH) highlights that the structural differences between membrane proteins and soluble proteins are not as disparate as is sometimes believed.     

Existence of a hydrophobic gap at the alkanethiol SAM-water interface: an interfacial capacitance study

The highly hydrophobic neat alkanethiol-coated SAM on evaporated gold shows an unusually low interfacial capacitance in aqueous media. This result cannot be explained by a simple parallel plate model of the double layer with the alkanethiol monolayer as a sole dielectric separator. Interestingly, a hydrophilic SAM prepared from a neat hydroxy thiol does not show any such capacitance lowering in aqueous media. Our results suggest the existence of a "hydrophobic gap" between the alkanethiol SAM-water interface. Such a model is also very much consistent with the predictions of Lum, Chandler, and Weeks theory of length scale dependent hydrophobicity.     

Solid-to-solid formation at the solid-liquid interface leading to a chiral coordination polymer from an achiral monomer

An achiral crystal of a simple mononuclear copper complex [Cu(II)(C(6)H(8)N(2))(2)SO(4)]·H(2)O (1), on dipping into an aqueous azide solution, transforms into a chiral crystal of a coordination polymer [Cu(II)(C(6)H(8)N(2))(N(3))(2)](n) (2) in a solid-liquid interface reaction demonstrating replacement of a sulfate anion by an azide anion from an aqueous solution.     

Characterization of the interface dipole at the paraphenylenediamine-nickel interface: a joint theoretical and experimental study

In organic-based (opto)electronic devices, charge injection into conjugated materials is governed to a large extent by the metal-organic interface dipole. Controlling the injection of charges requires a better understanding of the fundamental origin of the interface dipole. In this context, photoelectron spectroscopies and density functional theory calculations are used to investigate the interaction between para-phenylenediamine (PPDA), an electron donor, and a polycrystalline nickel surface. The interface dipole formed upon chemisorption of one PPDA monolayer strongly modifies the work function of the nickel surface from 5.10 to 3.55 eV. The work function decrease of 1.55 eV is explained by the electron-donor character of PPDA and the modification of the electronic density at the metal surface. PPDA monolayers are composed of tilted molecules interacting via the nitrogen lone-pair and PPDA molecules chemisorbed parallel to the surface via their pi-electron density. Annealing the monolayer leads to dehydrogenation of PPDA activated by the nickel surface, as found for other amines.     

Local film thinning due to concentration gradient of an insoluble surfactant at an interface

The local thinning of a viscous liquid film on a substrate driven by a surface (or interfacial) tension gradient due to a concentration gradient of a monolayer of an insoluble surfactant initially non-uniformly distributed at a liquid interface relevant to chemical engineering, biomedical and other applications is investigated. A simple model is presented for the temporal evolution of the profiles of radial variation in the thickness of a thin liquid film, the effects of gravity and capillarity due to deformation of the interface in slowing down the film thinning process being allowed. As time increases, the surfactant spreads and the radius of its front increases inversely with decrease in the two-third power of the film thickness at the center. The model describes well not only the published experimental results but also those obtained by other authors using numerical simulations of a set of coupled partial differential equations.     

Varying the counterions at a charged interface

The influence of different counterions on the adsorption behavior of the ionic soluble surfactant dodecyl-dimethylammonium-pyridimium bromide is investigated. The addition of potassium halogenides to aqueous solutions of the surfactant modifies the surface activity of the amphiphile and has a profound influence on the surface tension isotherms. The measured critical micelle concentration follows the order of the periodic table of elements which is in strong contrast to the surface excess. The number density of the adsorbed surfactants at the cmc does not depend on the amount of counterions in the solution but on the nature of the counterion. Furthermore, evidence is provided that the surface region is depleted on fluoride ions. Surface second harmonic generation and ellipsometry have been used to gain direct structural information which complement the thermodynamic considerations. The combination of both optical techniques yields the number density of the condensed counterions within the compact layer. A strategy to retrieve selected parameters of the ion binding model of Radke et al. is presented. The analysis of the optical data reveal the existence of a phase transition towards a surface condensed state with increasing salt condensation.     

Efforts to expand the genetic alphabet: identification of a replicable unnatural DNA self-pair

Six unnatural nucleotides featuring fluorine-substituted phenyl nucleobase analogues have been synthesized, incorporated into DNA, and characterized in terms of the structure and replication properties of the self-pairs they form. Each unnatural self-pair is accommodated in B-form DNA without detectable structural perturbation, and all are thermally stable and selective to roughly the same degree. Furthermore, the efficiency of polymerase-mediated mispair synthesis is similar for each unnatural nucleotide in the template. In contrast, the efficiency of polymerase-mediated self-pair extension is highly dependent on the specific fluorine substitution pattern. The most promising unnatural base pair candidate of this series is the 3-fluorobenzene self-pair, which is replicated with reasonable efficiency and selectivity.     

Spontaneous crystallization at the air-water interface: an unusual feature of gemini surfactant with a rigid spacer

An unusual feature which involves spontaneous crystallization at the air-water interface from aqueous solution was reported for a water-soluble gemini surfactant with xylyl spacer, (p-phenylenedimethylene) bis(dodecyldimethylammonium) dibromide. Polarizing microscope, in situ confocal microscopic Raman spectroscopy, and powder XRD were used to characterize the structure of the crystal and investigate the driving force for nucleation. It was inferred that, besides the surface enrichment of amphiphiles and the intra- and intermolecular interaction of alkyl chains, the pi-pi stacking interaction of benzene rings plays an extraordinary role in promoting nucleation and stabilizing crystal structure. A mechanism for constructing supramolecular architectures in situ at the air-water interface directly from aqueous solution via water-soluble amphiphiles with groups favorable for pi-pi stacking interaction was proposed.     

Nonionic surfactants: a key to enhance the enzyme activity at cationic reverse micellar interface

The primary objective of the present study is to understand how the different nonionic surfactants modify the anisotropic interface of cationic water-in-oil (W/O) microemulsions and thus influences the catalytic efficiency of surface-active enzymes. Activity of Chromobacterium viscosum lipase (CV-lipase) was estimated in several mixed reverse micelles prepared from CTAB and four different nonionic surfactants, Brij-30, Brij-92, Tween-20, and Tween-80/water/isooctane/n-hexanol at different z ([cosurfactant]/[surfactants]) values, pH 6 (20 mM phosphate), 25 degrees C across a varying range of W0 ([water]/[surfactants]) using p-nitrophenyl-n-octanoate as the substrate. Lipase activity in mixed reverse micelles improved maximum up to approximately 200% with increasing content of non-ionic surfactants compared to that in CTAB probably due to the reduced positive charge density as well as plummeted n-hexanol (competitive inhibitor of lipase) content at the interfacial region of cationic W/O microemulsions. The highest activity of lipase was observed in CTAB (10 mM) + Brij-30 (40 mM)/isooctane/n-hexanol)/water system, k2 = 913 +/- 5 cm3 g-1 s-1. Interestingly, this observed activity is even higher than that obtained in sodium bis (2-ethyl-1-hexyl) sulfosuccinate (AOT)/n-heptane reverse micelles, the most popular W/O microemulsion in micellar enzymology. To ascertain the influence of non-ionic surfactants in improving the activity of surface-active enzymes is not limited to lipase only, we have also investigated the catalytic activity of Horseradish peroxidase (HRP) in different mixed W/O microemulsions. Here also following the similar trend as observed for lipase, HRP activity enhanced up to 2.5 fold with increasing concentration of nonionic surfactants. Finally, the enzyme activity was correlated with the change in the microenvironment of mixed reverse micelles by steady-state fluorescence study using 8-anilino-1-napthalenesulphonic acid (ANS) as probe.     

Aggregation behaviors of gemini nucleotide at the air-water interface and in solutions induced by adenine-uracil interaction

Cationic gemini surfactants having nucleotides as counterions (called nucleo-gemini hereafter) were synthesized and their aggregation behavior at air-water surfaces as well as in bulk solutions were studied. Fluid solutions of these nucleo-gemini surfactants show transitions to hydrogels upon addition of complementary nucleoside bases or other nucleo-gemini surfactants having complementary bases as counterions. The FTIR-ATR measurements show that the carboxylate groups of uridine form hydrogen bonds with the amine groups of adenosine. The aggregation behavior was also confirmed at the air-water interface by Brewster angle microscopy as well as surface pressure measurements; the monolayer of a gemini nucleotide was observed to undergo a transition to multilayers when nucleosides with complementary bases were added into the subphase. Isotherm curves of surface pressure monitored in parallel show a decrease in molecular area upon addition of such nucleosides.     

Exciton reaction at an anthracene/metal interface: Charge transfer

The rate constant for dissociation of singlet excitons at an anthracene crystal metal interface is measured as a function of reaction distance. It is found that tunnelling of the excited electron is the rate-determining step.     

Solvation effects for polymers at an interface: a hybrid self-consistent field-density functional theory approach

Using polyatomic density functional theory of Kierlik and Rosinberg, we show that Wertheim's thermodynamic perturbation theory (TPT) incorporates solvation effects in a systematic, although simplified form. We derive two approximate solvation potentials, which require the knowledge of the correlation function in the reference unbonded fluid only. The theoretical predictions are tested against many-chain Monte Carlo simulations for moderate chain lengths. The predictions of the end-to-end distance in the bulk are in a reasonable agreement with simulations for the TPT(M-1) approximation, while the simpler TPT2_e approximation leads to the solvation potential that is shorter ranged and considerably less accurate. The resulting conformations are used in the subsequent self-consistent field theory calculations of hard-sphere polymers at a hard wall. While the incorporation of the solvation effects has little impact on the density profiles, the predictions of the components of the end-to-end distance vector as a function of the distance to the wall are much improved.     

Phase transition in an adsorption layer of a soluble surfactant at the air-water interface

In this paper we provide experimental evidence for a phase transition between a liquid- and gas-like phase occurring in an adsorption layer of a soluble surfactant at the air-water interface. The equilibrium surface tension sigma(e) versus bulk concentration sigma(e) (c) isotherm of surface chemically pure sodium 2-[4-(4-trifluoromethyl-phenylazo) phenoxy]-ethane sulfonate was measured at a temperature of 295 K up to the solubility limit of the amphiphile. The sigma(e) (c) isotherm could be fitted by Frumkin's equation of state. The lateral interaction energy is just above the limit for which Frumkin's model predicts a phase transition. The corresponding surface pressure pi versus surface area A isotherm possesses striking similarities to first-order phase transitions in the Langmuir monolayer. The fact that the difference in the two-dimensional density is only a factor of 2 indicates that the system is very close to the critical point. The surface phases were further characterized by surface second harmonic generation. The major structural difference between the two surface phases is the amphiphile's molecular orientation. A mean orientation of the amphiphile of about 80 degrees was found in the gas analogous phase, whereas a molecular tilt of 38 degrees has been identified in the liquid-like phase.     

Optical measurements of an acylated azacrown at the air-water interface

In this study, a cyclame derivative bearing four aliphatic chain substituents shows, like many amphiphiles, solid-condensed as well as liquid-expanded phases. In contrast to the classical amphiphiles, the onset of its phase transition is characterized by a bump-like shape whose amplitude is a function of the compression speed. Ellipsometry which is very sensitive to the monolayer physical state changes, and fluorescence microscopy which has contributed significantly to the understanding of the phenomena occurring in the phase transition region have been used to investigate the monolayer behavior of this compound. This study shows that in the liquid-expanded state, the film is homogeneous and remains as such until either the maximum amplitude of the bump is reached or the beginning of the plateau sets in. Thereafter, heterogeneity with formation of diamond-like domains appears with domain sizes varying with compression speed. The formation of the domains coincides with a change in the ellipsometric zone differences. From this ellipsometric behavior, a change in the distribution of the orientation of the molecules is suggested to take place at the onset of the phase transition.     

Cross-linking of polybutadiene at the air/water interface: toward an easy access to two-dimensional polymeric materials

A novel approach to two-dimensionally crosslink polydienes at the air/water interface is proposed. The acid-catalyzed condensation of the triethoxysilane pendant groups of triethoxysilane-functionalized polybutadiene chains at the air/water interface successfully led to the formation of an insoluble crosslinked material which could be directly removed from the water surface. The efficiency of the cross-linking reaction was demonstrated through surface pressure measurements such as surface pressure-mean molecular area isotherms recorded at different reaction times and isobar experiments for different subphase pH values. The evolution of the monolayer topography during cross-linking was studied by atomic force microscopy imaging of the Langmuir-Blodgett films.     

Random copolymers at a selective interface: saturation effects

Combining scaling arguments and Monte Carlo simulations using the bond fluctuation method we have studied concentration effects for the adsorption of symmetric AB-random copolymers at selective, symmetric interfaces. For the scaling analysis we consider a hierarchy of two length scales given by the excess (adsorption) blobs and by two dimensional thermal blobs in the semidilute surface regime. When both length scales match, a densely packed array of adsorption blobs is formed (saturation). We show that for random copolymer adsorption the interface concentration can be further increased (oversaturation) due to reorganization of excess blobs. Crossing over this threshold results in a qualitative change in the behavior of the adsorption layer which involves a change in the average shape of the adsorbed chains towards a hairpinlike form. We have analyzed the distribution of loops and tails of adsorbed chains in the various concentration regimes as well as the chain order parameter, concentration profiles, and the exchange rate of individual chains. We emphasized the role of saturation scaling which dominates the behavior of static and dynamic quantities at higher surface concentration.     

Solvent polarity at an aqueous/alkane interface: the effect of solute identity

Resonance-enhanced second harmonic generation (SHG) has been used to probe the solvatochromic behavior of two small, aromatic chromophores adsorbed to the aqueous/cyclohexane, liquid/liquid interface. SHG spectra of p-nitrophenol (PNP) and 2,6-dimethyl-PNP (dmPNP) indicate that these two chromophores sample markedly different environments. PNP sees a polar, waterlike environment, whereas solvent polarity surrounding dmPNP is dominated by the nonpolar, organic phase. Results suggest that subtle changes in solute structure can change the distribution of solutes across an interface and thus change a solute's local solvation environment.     

Rational engineering of a DNA glycosylase specific for an unnatural cytosine:pyrene base pair

A novel site-specific cytosine DNA glycosylase has been rationally engineered from the active site scaffold of the DNA repair enzyme uracil DNA glycosylase (UDG). UDG, which operates by a nucleotide flipping mechanism, was first converted into a sequence nonspecific cytosine DNA glycosylase (CDG) by altering the base-specific hydrogen bond donor-acceptor groups in the active site. A second mutation that renders UDG defective in nucleotide flipping was then introduced, and the double mutant was rescued using a substrate with a "preflipped" cytosine base. Substrate-assisted flipping was engineered by incorporation of an unnatural pyrene nucleotide wedge (Y) into the DNA strand opposite to the target cytosine. This new enzyme, CYDG, can be used to target cleavage of specific cytosine residues in the context of a C/Y base pair in any DNA fragment.     

Matrix crack deflection at an interface between a stiff matrix and a soft inclusion

Matrix crack deflection by an interface increases the apparent toughness of a composite. Criteria developed to predict such a mechanism never gave a complete and satisfying answer. They require additional assumptions on a characteristic fracture length and are sensitive to these choices. The criterion proposed here is based on the maximum total energy decrease, it is independent of any length and is well-suited to study a stiff matrix crack impinging on a soft inclusion.     

Total synthesis and bioactivity of an unnatural enantiomer of merrilactone a: development of an enantioselective desymmetrization strategy

(-)-Merrilactone A [(-)-1], isolated from Illicium merrillianum in 2000, possesses neurite outgrowth activity in cultures of fetal rat cortical neurons, and, therefore, is expected to show therapeutic potential for the treatment of neurodegeneration associated with Alzheimer's and Parkinson's diseases. Apart from its biological aspects, the caged pentacyclic skeleton of 1 poses interesting synthetic challenges. Here, we report the total synthesis of the unnatural enantiomer of merrilactone A [(+)-1], based on a novel desymmetrization strategy. The chiral lithium amide 16g promoted an enantioselective transannular aldol reaction of eight-membered meso-diketone 3d, establishing the absolute stereochemistries of four chiral centers of the cis-bicyclo[3.3.0]octane framework of 1 in a single step. The obtained compound 4d served as a platform for the subsequent functional group manipulations necessary for the construction of (+)-1. Surprisingly, both the natural and unnatural enantiomers of synthetic merrilactone A equally promoted neurite outgrowth in primary neuronal cultures.