Dirhenium paddlewheel compounds supported by N,N'-dialkylbenzamidinates: synthesis, structures, and photophysical properties

Dirhenium(III,III) compounds Re2(DMBA)4Cl2 (1, DMBA=N,N'-dimethylbenzamidinate) and Re2(DEBA)4Cl2 (2, DEBA=N,N'-diethylbenzamidinate) were synthesized via molten reactions between Re2(OAc)4Cl2 and the corresponding amidine. Re2(DMBA)4(NO3)2 (3) was obtained through reacting Re2(DMBA)4Cl2 with AgNO3. Single crystal X-ray diffraction studies revealed that the Re-Re distances in compounds 1-3 are 2.212(1), 2.217(1), and 2.173(1) A, respectively, which are consistent with the presence of a Re-Re quadruple bond. Voltammetric studies revealed that compound 2 exhibits two quasireversible couples, an oxidation and a reduction, and an irreversible reduction, while compound 1 displays irreversible couples at similar potentials. The three complexes exhibit 1deltadelta* absorption as a shoulder at approximately 440 nm (epsilon approximately 1500 M(-1) cm(-1)). Upon excitation of solid samples or CH2Cl2 solutions of 2 with visible light, emission is observed at 824 nm (77 K) and 833 nm (298 K), respectively. The luminescence is assigned as arising from the 3deltadelta* excited state.     

Early-late, mixed-metal compounds supported by amidophosphine ligands

The sequential syntheses, structural characterisation and reactivity studies of a series of discrete early-late mixed-metal complexes supported by the unique amidophosphine ligand m-(But2CH)N(C6H4)PPh2L1 are described. This ligand was synthesised using a Schiff-base/ButLi protocol and the resultant lithium salt LiL1 found to adopt a tetrameric structure in the solid state in which both two-coordinate N-Li-N and eta6:eta6-arylLi metallocene bonding motifs are present. Reaction between HL1 and labile Pt(II) and Pd(II) chlorides formed MCl2(HL1)2 complexes 4 (M = Pt) and 5 (M = Pd) in which a weak N-H...pi(aryl) hydrogen bonding interaction was identified in the solid-state structure of 4. These compounds were found to be inert to transamination and protonolysis reactions with Ti amides and alkyls; instead, stepwise alkyl transfer from Ti to Pt, resulting in Pt(CH2SiMe3)2(HL1)2 6 was observed. Access to mixed-metal complexes was achieved using an early-metal-first approach. Reaction between the metalloligand TiCl2(L1)2 and labile Group 10 and group 9 compounds resulted in the formation of TiCl2(mu-L1)2PtCl2 8, TiCl2(mu-L1)2PtMe2 9, TiCl2(mu-L1)2PdCl2 10, TiCl2(mu-L1)2NiBr2 11, and [TiCl2(mu-L1)2RhCl(CO)]2 12. In the solid state, the Group 4/10 compounds 8, 9 and 10 adopt similar structures that exhibit both intramolecular But2C-H...Cl-Ti hydrogen bonding and arylNP pi-stacking interactions; this hydrogen-bonding interaction is conserved in solution. Unlike the above Group 4/10 complexes, the Ti-Rh complex 12 adopts a tetranuclear structure in the solid state that is stabilised by similar hydrogen-bonding and pi-stacking interactions. The Group 4/10 complexes were assessed as catalysts for olefin polymerisation and cross-coupling reactions. In combination with MAO, the mixed-metal complexes 8 and 10 were poor ethylene polymerisation catalysts and resulted in polymers of both high molecular weight and polydispersity. The Ti-Ni complex 11 formed oligomeric material only, while the mononuclear Ti metalloligand TiCl2(L1)2 gave the best results, showing low activity (6.14 kg mol(-1) bar(-1) h(-1)) and moderate polydispersity (12). The Ti-Pd complex 10 was assessed in arylamination and Suzuki-Miyaura reactions. While little or no catalytic activity was observed in arylamination reactions, 10 was found to effect Suzuki coupling between activated aryl bromides and phenylboronic acid at 80 degrees C. Unlike with TiCl2(L1)2, reactions between 8 and the reducing agents C8K or Mg led to intractable mixtures. However, the cyclic voltammetry of both compounds indicated that a reversible one-electron reduction process occurs at a similar potential (ca. -0.7 V) and was assigned to the formation of the monohalides TiCl(L1)2 and TiCl(mu-L1)2PtCl2. The reactivity of the metallocage TiCl(mu-L3)3Pt was also investigated. While reduction reactions were unsuccessful, the metallocage reacted with CO to form the Ti-Pt carbonyl, TiCl(mu-L3)3Pt(CO) 13. The X-ray crystal structure of 13 revealed that accommodation of CO at the Pt centre has caused the cage expansion and loss of agostic aryl-H...Pt interactions. Furthermore, reaction of TiCl(mu-L3)3Pt with excess MeI resulted in the formation of the Ti(IV)-Pt(II) complex trans-TiCl2(mu-L3)2(kappa1-L3MeI)Pt(Me)I.     

Dissolution of kaolinite induced by citric, oxalic, and malic acids

Kaolinite is a dominant clay mineral in the soils in tropical and subtropical regions, and its dissolution has an influence on a variety of soil properties. In this work, kaolinite dissolution induced by three kinds of low-molecular-weight organic acid, i.e., citric, oxalic, and malic acids, was evaluated under far-from-equilibrium conditions. The rates of kaolinite dissolution depended on the kind and concentration of organic acids, with the sequence R(oxalate)>R(citrate)>R(malate). Chemical calculation showed the change in concentration of organic ligand relative to change in concentration of organic acid in suspensions of kaolinite and organic acid. The effect of organic acid on kaolinite dissolution was modeled by species of organic anionic ligand. For oxalic acid, L(2-)(oxalic) and HL(-)(oxalic) jointly enhanced the dissolution of kaolinite, but for malic and citric acids, HL(-)(malic) and H2L-(citric) made a higher contribution to the total dissolution rate of kaolinite than L(2-)(malic) and L(3-)(citric), respectively. For oxalic acid, the proposed model was R(Si)=1.89x10(-12)x[(25x)/(1+25x)]+1.93x10(-12)x[(1990x1)/(1+1990x1)] (R2=0.9763), where x and x1 denote the concentrations of HL(oxalic) and L(oxalic), respectively, and x1=10(-3.81)xx/[H+]. For malic acid, the model was R(Si)=4.79x10(-12)x[(328x)/(1+328x)]+1.67x10(-13)x[(1149x1)/(1+1149x1)] (R2=0.9452), where x and x1 denote the concentrations of HL(malic) and L(malic), respectively, and x1=10(-5.11)xx/[H+], and for citric acid, the model was R(Si)=4.73x10(-12)x[(845x)/(1+845x)]+4.68x10(-12)x[(2855x1)/(1+2855x1)] (R2=0.9682), where x and x1 denote the concentrations of H2L(citric) and L(citric), respectively, and [Formula: see text] .     

Metal coordination by sterically hindered heterocyclic ligands, including 2-vinylpyridine, assessed by investigation of cobaloximes

Structural and 1H NMR data have been obtained for cobaloximes with the bulkiest substituted pyridines reported so far. We have isolated in noncoordinating solvents the complexes CH3Co(DH)2L (methylcobaloxime, where DH = the monoanion of dimethylglyoxime) with L = sterically hindered N-donor ligands: quinoline, 4-CH3quinoline, 2,4-(CH3)2pyridine, and 2-R-pyridine (R = CH3, OCH3, CH2CH3, CH=CH2). We have found that the Co-N(ax) bond is very long in the structurally characterized complexes. In particular, CH3Co(DH)2(4-CH3quinoline) has a longer Co-N(ax) bond (2.193(3) A) than any reported for methylcobaloximes. The main cause of the long bonds is unambiguously identified as the steric bulk of L by the fairly linear relationship found for Co-N(ax) distance vs CCA (calculated cone angle, CCA, a computed measure of bulk) over an extensive series of methylcobaloximes. The linear relationship improves if L basicity (quantified by pKa) is taken into account. In anhydrous CDCl3 at 25 degrees C, all complexes except the 2-aminopyridine adduct exhibit 1H NMR spectra consistent with partial dissociation of L to form the methylcobaloxime dimer. 1H NMR experiments at -20 degrees C allowed us to assess qualitatively the relative binding ability of L as follows: 2,4-(CH3)2pyridine > 4-CH3quinoline approximately = quinoline approximately = 2-CH3pyridine > 2-CH3Opyridine > 2-CH3CH2pyridine > 2-CH2=CHpyridine. The broadness of the 1H NMR signals at 25 degrees C suggests a similar order for the ligand exchange rate. The lack of dissociation by 2-aminopyridine is attributed to an intramolecular hydrogen bond between the NH2 group and an oxime O atom. The weaker than expected binding of 2-vinylpyridine relative to the Co-N(ax) bond length is attributed to rotation of the 2-vinyl group required for this bulky ligand to bind to the metal center, a conclusion supported by pronounced changes in 2-vinylpyridine signals upon coordination.     

Crystal structure and magnetic interactions in nickel(II) dibridged complexes formed by two azide groups or by both phenolate oxygen-azide, -thiocyanate, -carboxylate, or -cyanate groups

Tridentate/tetradentate Schiff base ligands L(1) and L(2), derived from the condensation of o-vanillin or pyridine-2-aldehyde with N,N-dimethylethylenediammine, react with nickel acetate or perchlorate salt and azide, cyanate, or thiocyanate to give rise to a series of dinuclear complexes of formulas [Ni(L(1))(micro(1,1)-N(3))Ni(L(1))(N(3))(OH(2))].H(2)O (1), [[Ni(L(1))(micro(1,1)-NCS)Ni(L(1))(NCS)(OH(2))][Ni(L(1))(micro-CH(3)COO)Ni(L(1))( NCS) (OH(2))]] (2) [[2A][2B]], [Ni(L(1))(micro(1,1)-NCO)Ni(L(1))(NCO)(OH(2))].H(2)O (3), and [Ni(L(2)-OMe)(micro(1,1)-N(3))(N(3))](2) (4), where L(1) = Me(2)N(CH(2))(2)NCHC(6)H(3)(O(-))(OCH(3)) and L(2) = Me(2)N(CH(2))(2)NCHC(6)H(3)N. We have characterized these complexes by analytical, spectroscopic, and variable-temperature magnetic susceptibility measurements. The coordination geometry around all of the Ni(II) centers is a distorted octahedron with bridging azide, thiocyanate/acetate, or cyanate in a micro(1,1) mode and micro(2)-phenolate oxygen ion for 1-3, respectively, or with a double-bridging azide for 4. The magnetic properties of the complexes were studied by magnetic susceptibility (chi(M)) versus temperature measurements. The chi(M) nus T plot reveals that compounds 1 and 4 are strongly ferromagnetically coupled, 3 shows a weak ferromagnetic behavior, and 2 is very weakly antiferromagnetically coupled.     

Synthesis, electrochemistry, and spectroscopic characterization of bis-dirhodium complexes linked by axial ligands

The synthesis and electrochemical and spectroscopic properties of bis-dirhodium complexes containing ap or dpf bridging ligands, (ap)(4)Rh(2)(C triple bond C)(2)Rh(2)(ap)(4) (2) and (dpf)(4)Rh(2)(CNC(6)H(4)NC)Rh(2)(dpf)(4) (4), were investigated (where ap and dpf are the 2-anilinopyridinate and N,N'-diphenylformamidinate ions, respectively). The related "simple" dirhodium species, (ap)(4)Rh(2)(C triple bond C)(2)Si(CH(3))(3) (1) and (dpf)(4)Rh(2)(CNC(6)H(5)) (3), with the same set of bridging ligands were also synthesized and their properties compared to those of the analogous bis-dirhodium complexes. Compound 1 was obtained by mixing (ap)(4)Rh(2)Cl and Li(C triple bond C)(2)Si(CH(3))(3) in refluxing THF for 16 h under vacuum while compound 2 was prepared by a reaction between (ap)(4)Rh(2)(C triple bond C)(2)Li and (ap)(4)Rh(2)Cl under similar conditions. The reaction between (CF(3)COO)(4)Rh(2) and molten Hdpf under vacuum for 24 h leads to the generation of compound 3 with a yield of 65%. The red-orange compound 4 was obtained upon addition of 0.5 equiv of CNC(6)H(4)NC at room temperature to a CH(2)Cl(2) solution containing (dpf)(4)Rh(2) which was synthesized according to a method described previously in the literature. Compound 1 crystallizes in the triclinic space group P1, with a = 10.164(3) A, b = 13.881(3) A, c = 18.805(4) A, alpha = 73.55(2) degrees, beta = 77.89(2) degrees, gamma = 84.85(2) degrees, and Z = 2. Crystals of 2 were not good enough to collect adequate data for X-ray analysis, but the identity of this compound was confirmed, along with its P1; space group. Crystals of 3 and 4 belong to the monoclinic, P2(1)/c space group and the triclinic, P1; space group, respectively, with a = 13.5254(5) A, b = 13.7387(4) A, c = 27.2011(12) A, beta = 102.637(2) degrees, and Z = 4 for 3 and a = 13.866(8) A, b = 14.756(7) A, c = 15.008(6) A, alpha = 79.91(3) degrees, beta = 87.72(4) degrees, gamma = 89.19(4) degrees, and Z = 1 for 4. Compound 1 exhibits a single reversible oxidation at E(1/2) = 0.66 V and a single reversible reduction at E(1/2) = -0.44 V vs SCE in THF, 0.2 M TBAP. Both processes involve a one-electron transfer. Compound 2 undergoes a reversible oxidation at E(1/2) = 0.60 V and two separate one-electron-transfer reductions at E(1/2) = -0.52 and -0.65 V in THF, 0.2 M TBAP. The oxidation involves two overlapped one-electron-transfer processes. Compounds 3 and 4 undergo two reversible oxidations in CH(2)Cl(2), 0.1 M TBAP located at E(1/2) = 0.23 and 1.22 V (3) or 0.22 and 1.20 V (4). Each redox reaction of 3 involves a one-electron-transfer step while each redox reaction of 4 involves two overlapping one-electron transfers. Compound 2 shows interaction between the two dirhodium cores upon reduction, while 4 gives no evidence of electronic interaction between the two dirhodium units during either reduction or oxidation. An ESR signal with axial symmetry was obtained for the neutral compounds 1 and 2, and a similar spectrum was obtained for the singly oxidized products of compounds 3 and 4, thus suggesting the electronic configuration of (sigma)(2)(pi)(4)(delta)(2)(pi)(4)(delta)(1) for the neutral compounds 1 and 2 as well as for the oxidized compounds 3 and 4. The four compounds were also characterized by FTIR and UV-visible spectroscopy as well as by mass spectrometry.     

Activation mechanisms of butyrylcholinesterase by 2,4,6-trinitrotoluene, 3,3-dimethylbutyl-N-n-butylcarbamate, and 2-trimethylsilyl-ethyl-N-n-butylcarbamate

The goal of this work was to propose a possible mechanism for the butyrylcholinesterase activation by 2,4,6-trinitrotoluene (TNT), 3,3-dimethylbutyl-N-n-butylcarbamate (1), and 2-trimethylsilyl-ethyl-N-n-butylcarbamate (2). Kinetically, TNT, and compounds 1 and 2 were characterized as the nonessential activators of butyrylcholinesterase. TNT, and compounds 1 and 2 were hydrophobic compounds and were proposed to bind to the hydrophobic activator binding site, which was located outside the active site gorge of the enzyme. The conformational change from a normal active site gorge to a more accessible active site gorge of the enzyme was proposed after binding of TNT, and compounds 1 and 2 to the activator binding site of the enzyme. Therefore, TNT, and compounds 1 and 2 may act as the excess of butyrylcholine in the substrate activator for the butyrylcholinesterase catalyzed reactions.     

Monothioindigo,determined by microcrystal structure analysis

Indigo and thioindigo pigments are used for a wide range of applications. The crystal structure of the mixed compound monothioindigo [systematic name: (E)‐2‐(3‐oxo‐2,3‐dihydro‐1‐benzothiophen‐2‐ylidene)‐2,3‐dihydro‐1H‐indol‐3‐one], C₁₆H₉NO₂S, has been determined by microcrystal structure analysis from a crystal with a size of just 1 × 2 × 10 µm. The crystal structure of monothioindigo resembles those of indigo and thioindigo. The molecules show orientational disorder, with site‐occupation factors of 0.962 (2) and 0.038 (2) for the major and minor disorder components, respectively. The indigo fragment donates an intermolecular hydrogen bond, leading to a criss‐cross arrangement of molecules similar to that in indigo, whereas the thioindigo fragment exhibits only van der Waals interactions and molecular stacking, similar to that in thioindigo.     

Synthesis of pyrazolidine, 1-pyrazoline, 2-pyrazoline derivatives by selenium-induced cyclization of homoallylhydrazines

The PhSeBr-induced cyclization of N′-but-3-en-1-yl ethoxycarbonylhydrazines 1, phenylhydrazines 2 and dimethylhydrazines 3 has been studied. A 5-exo-trig ring closure occurred in each case and phenylselanylmethyl-pyrazolidines 4, 2-pyrazolines 5 and 10, 1-pyrazolines 8 and pyrazolidinium bromides 11 were synthesized. Radical deselenenylation has allowed the preparation of 5-methylpyrazolidines 12 and 5-methyl-2-pyrazolines 13 and 14. Decomposition of the dibromoselenuranes derived from 2-pyrazolines 5 and 10 afforded bromomethyl derivatives. With 1-phenyl-2-pyrazolines 10, an electrophilic p-halogenation of the phenyl nucleus was observed.     

Biotransformation of a C-glycosylflavone, abrusin 2''-O-beta-D-apioside, by human intestinal bacteria

After anaerobic incubation of abrusin 2'-O-beta-D-apioside (1) with a human fecal suspension, five metabolites were isolated and identified as abrusin (2), 1-(2',6'-dihydroxy-3',4'-dimethoxyphenyl)-3-(4'-hydroxyphenyl)propan-1- one (5), 5,6-dimethoxybenzene-1,3-diol (6), 3-(4'-hydroxyphenyl)propionic acid (7) and 3-phenylpropionic acid (8). However, methyl ether derivatives of abrusin (4'-O-methylabrusin and 4'-O-, 5-O-dimethylabrusin) resisted degradation under the same conditions.     

Determination of aromatic amine mutagens,PBTA-1 and PBTA-2, in river water by solid-phase extraction followed by liquid chromatography-tandem mass spectrometry

We describe a novel method for the determination of two kinds of aromatic amine mutagens, 2-[2-(acetylamino)-4-[bis(2-methoxyethyl)-amino]-5-amino-7-bromo-4-chloro-2H-benzotriazole (PBTA-1) and 2-[2-(acetylamino)-4-[bis(2-cyanoethyl)-ethylamino]-5-amino-7-bromo-4-chloro-2H-benzotriazole (PBTA-2), in river water based on liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS-MS). A solid-phase extraction procedure was used for the extraction of PBTA-1 and PBTA-2 from river water. The procedure was rapid and the relative standard deviations were below 4%. The detection limits of PBTA-1 and PBTA-2 in river water using the proposed method were found to be 1 and 2 ng/l, respectively. The compounds were detected by this method in river water taken from two sites in the Yodo River system at the ng/l level.     

The versatile, efficient, and stereoselective self-assembly of transition-metal helicates by using hydrogen-bonds

A diverse range of dinuclear double-stranded helicates in which the ligand strand is built up by using hydrogen-bonding has been synthesized. The helicates, formulated as [Co(2)(L)(2)(L-H)(2)X(2)], readily self-assemble from a mixture of a suitable pyridine-alcohol compound (L; for example, 6-methylpyridine-2-methanol, 1), and a CoX(2) salt in the presence of base. Nine such helicates have been characterized by X-ray crystallography. For helicates derived from the same pyridine-alcohol precursor, a remarkable regularity was found for both the molecular structure and the crystal packing arrangements, regardless of the nature of the ancillary ligand (X). A notable exception was observed in the solid-state structure of [Co(2)(1)(2)(1-H)(2)(NCS)(2)] for which intermolecular nonbonded contacts between the sulfur atoms (SS=3.21 A) lead to the formation of 1D chains. Helicates derived from (R)-6-methylpyridine-2-methanol (2) are soluble in solvents such as CH(3)CN and CH(2)Cl(2), and their self-assembly could be monitored in solution by (1)H NMR, UV/Vis, and CD titrations. No intermediate complexes were observed to form in a significant concentration at any point throughout these titrations. The global thermodynamic stability constant of [Co(2)(2)(2)(2-H)(2)(NO(3))(2)] was calculated from spectrophotometric data to be logbeta=8.9(8). The stereoisomerism of these helicates was studied in some detail and the self-assembly process was found to be highly stereoselective. The chirality of the ligand precursors can control the absolute configuration of the metal centers and thus the overall helicity of the dinuclear assemblies. Furthermore, the enantiomers of rac-6-methylpyridine-2-methanol (3) undergo a self-recognition process to form exclusively homochiral helicates in which the four pyridine-alcohol units possess the same chirality.     

Synthesis, characterization, and reaction of aluminum halide amides supported by a bulky beta-diketiminato ligand

Monomeric aluminum chloride amides with the general formula LAl(Cl)NR2 (1, R = Me; 2, R = iPr; 3, R = SiMe 3; L = HC[C(Me)N(Ar)]2; Ar = 2,6- iPr2C6H3) were prepared by selected routes. Treatment of LAlBr 2 (4) and LAlI2 with LiNMe2 yielded LAl(Br)NMe2 (5) and LAl(I)NMe2 (6), respectively. The alkylation of 1 and 2 with MeLi gave the corresponding methylated compounds LAl(Me)NR2 (7, R = Me; 8, R = iPr); however, no reaction of 3 with MeLi was observed because of steric hindrance. Subsequent fluorination of 1- 3 afforded LAl(F)NR2 (9, R = Me; 10, R = iPr; 11, R = SiMe3). Compounds 1-11 were characterized by multinuclear NMR, electron impact mass spectrometry, and IR. The constitution of compounds 1-3 was confirmed by single-crystal X-ray diffraction studies.     

Insertion, reduction, and carbon-carbon coupling induced by monomeric aluminum hydride compounds bearing substituted pyrrolyl ligands

A monomeric aluminum hydride complex bearing substituted pyrrolyl ligands, AlH[C(4)H(3)N(CH(2)NMe(2))-2](2) (1), was synthesized and structurally characterized. To further confirm the presence of Al--H bonds, the compound AlD[C(4)H(3)N(CH(2)NMe(2))-2](2) ([D]1) was synthesized by reacting LiAlD(4) with [C(4)H(4)N(CH(2)NMe(2))-2]. Compound 1 and [D]1 react with phenyl isothiocyanate yielding Al[C(4)H(3)N(CH(2)NMe(2))-2](2)[eta(3)-SCHNPh] (2) and Al[C(4)H(3)N(CH(2)NMe(2))-2](2)[eta(3)-SCDNPh] ([D]2) by insertion. The reactions of 1 with 9-fluorenone and benzophenone generated the unusual aluminum alkoxide complexes 3 and 4, respectively, through intramolecular proton abstraction and C-C coupling. A mechanistic study shows that 9-fluorenone coordinates to [D]1 and releases one equivalent of HD followed by C-C coupling and hydride transfer to yield the final product. Reduction of benzil with 1 affords aluminum enediolate complex 5 in moderate yield. Mechanistic studies also showed that the benzil was inserted into the aluminum hydride bond of [D]1 through hydroalumination followed by proton transfer to generate the final product [D]5. All new complexes have been characterized by (1)H and (13)C NMR spectroscopy and X-ray crystallography.     

Generation of secondary, tertiary, and quaternary centers by geminal disubstitution of carbonyl oxygens

Methods for replacing the carbonyl oxygen by two new substituents (C=O→CR(1)R(2)) are discussed in this Minireview, whereby R may be H, NR(2), alkyl, allyl, benzyl, vinyl, alkynyl, aryl, heteroaryl, or acyl groups. The most frequently used starting materials for geminal disubstitution with the formation of two C-C bonds (R(1),R(2)≠H, NR(2)) are amides and thioamides, which react with organometallic nucleophiles R-M (M=Li, MgX, CeX(2), TiX(3), ZrX(3)) to give tertiary sec- and tert-alkylamines. Quaternary centers can be built directly from ketones by treatment with Me(3)Al, MeTiCl(3), or Me(2)TiCl(2) (R(1)R(2)C=O→R(1)R(2)CMe(2)). The scope and limitations of the various methods and mechanistic models are briefly discussed. The remarkable variety and diversity of structures thus accessible are demonstrated by numerous examples.     

Methylation of 1, 2, 3, 4-tetrahydroacridine by butyllithium,and the preparation of tetrahydroacridyl aryl carbinols

A number of aryl 4-(1, 2, 3, 4-tetrahydroacridyl) carbinols have been synthesized via the 4-lithio derivative of 1, 2, 3, 4-tetrahydroacridine. Some of them have been dehydrated to the corresponding arylidines.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1239–1241, September, 1970.     

Oxidation of sulfoxides by hydrogen peroxide,catalyzed by methyltrioxorhenium(VII)

Dialkyl and diaryl sulfoxides are oxidized to sulfones by hydrogen peroxide using methyltrioxorhenium as the catalyst. The reaction rate is negligible without a catalyst. The kinetics study was performed in CH3CN-H2O (4:1 v/v) at 298 K with [H+] at 0.1 M, conditions which make the equilibration between MTO and its peroxo complexes more rapid than the oxygen-transfer step. The values for the rate constant for the oxygen-transfer step lie in the range 0.1-3 L mol-1 s-1. The rate constants were significantly smaller than for the oxidation of sulfides to sulfoxides. A study of ring-substituted diaryl sulfoxides yielded kinetics results that are consistent with nucleophilic attack of the sulfur atom on the peroxide oxygen group since rho = -0.65. The results cited refer to the reactions of the diperoxo from the catalyst, MeRe(O)(eta 2-O2)2H2O. The monoperoxo complex showed no measurable reactivity toward sulfoxides, in contrast with the situation for nearly every other substrate. That unusual finding suggests a hydrogen-bonded interaction between the substrate and the diperoxorhenium compound which cannot exist with the monoperoxo compound.     

Microbial transformation of terreusinone, an ultraviolet-A (UV-A) protecting dipyrroloquinone, by Streptomyces sp

Biotransformation study was conducted on the marine dipyrroloquinone, terreusinone (1) isolated from the marine-derived fungus Aspergillus terreus. Preparative-scale fermentation of terreusinone with Streptomyces sp. has resulted in the isolation of a new oxidized metabolite, terreusinol (2). The structure was elucidated as 2-[(1R)-1-hydroxyisobutyl]-6-[(1R)-1,2-dihydroxyisobutyl]-1H,5H-pyrrolo[2,3-b]indole-4,8-dione (2) on the basis of physicochemical evidence. Terreusinol (2) showed an ultraviolet-A (UV-A) (320-390 nm) protecting activity with ED(50) values of 150 microM, which is more active than oxybenzone (ED(50), 350 microM) currently being used as sunscreen.     

Selenium-centered, undecanuclear silver cages surrounded by iodo and dialkyldiselenophosphato ligands. Syntheses, structures, and photophysical properties

Three clusters [Ag11(mu9-Se)(mu3-I)3{Se2P(OR)2}6] (R = Et, 1; iPr, 2; 2Bu, 3) were isolated from the reaction of [Ag(CH3CN)4](PF6), NH4[Se2P(OR)2], and Bu4NI in a molar ratio of 4:3:1 in CH2Cl2 in 47-55% yield. Compounds 1 and 2 can also be synthesized with high yield from the reaction of Ag10(Se)[Se2P(OR)2]8 with 8 equiv of Bu4NI. In the positive fast atom bombardment mass spectra of 1-3, two major peaks that correspond to the intact molecule with the loss of an iodide ion, [Ag11(mu9-Se)(mu3-I)(2){Se2P(OR)2}6]+, and a diselenophosphate ligand, [Ag11(mu9-Se)(mu3-I)3{Se2P(OR)2}5]+, were identified. Single-crystal X-ray analyses of 2 and 3 reveal an Ag11Se core stabilized by three iodide anions and six diselenophosphato ligands in a tetrametallic tetraconnective (mu2,mu2) coordination mode. The central core adopts the geometry of a 3,3,4,4,4-pentacapped trigonal prism with a selenium atom in the center. In addition, weak intermolecular Se...I interactions exist in 2 and form a one-dimensional polymeric chain structure. Furthermore, all compounds exhibit orange-red luminescence in both the solid state and solution.