Internal reflection mode scanning near-field optical microscopy with the tetrahedral tip on metallic samples

An internal reflection mode is introduced for scanning near-field optical microscopy (SNOM) with the tetrahedral tip. A beam of light is coupled into the tip and the light specularly reflected out of the tip is detected as a photosignal for SNOM. An auxiliary STM mode is used to control the distance during the scanning process and to record the topography of the sample simultaneously with the SNOM image. Images were obtained of different metallic samples which show a contrast in the order of 10% of the total reflected photosignal. In images of metallic samples an inverted contrast is consistently obtained compared to images previously obtained of comparable samples in a transmission mode. The contrast shows a pronounced dependence on the polarization of the incident beam with respect to the orientation of the edges of the tip. In the case of gold surfaces, the photosignal as a function of distance between the tip and the surface shows a pronounced peak in the near-field range of 0–20 nm which is tentatively attributed to the excitation of surface plasmons on the gold surface. The pronounced near-field effects and the strong contrast in the near-field images and the resolution well below 50 nm are an indication of a highly efficient coupling of the incident beam to a local excitation of the tip apex which is essential for the function of the tip as a probe for SNOM. Received: 17 May 1999 / Accepted: 18 May 1999 / Published online: 21 October 1999     

Two-Dimensional Near-Field Optical Spectroscopy in Magnetic Fields up to 4 T

We have developed a magnetic-field-type scanning near-field optical microscopy (SNOM) system, which enables us to obtain two-dimensional near-field images under magnetic fields up to 4 T. We have performed two-dimensional near-field scanning optical spectroscopy on (Cd,Mn) Te self-assembled quantum dots with this system.     

Sensitivity analysis of scanning near-field optical microscope probe

In this paper, we study the dynamic modes of a scanning near-field optical microscope (SNOM) which uses an optical fiber probe; and the sensitivity of flexural and axial vibration modes for the probe were derived and the closed-form expressions were obtained. According to the analysis, as expected each mode has a different sensitivity and the first mode is the most sensitive mode of flexural and axial vibration for the SNOM probe. The sensitivities of both flexural and axial modes are greater for a material surface that is compliant with the cantilever probe. As the contact stiffness increases, the high-order vibration modes are more sensitive than the lower-order modes. Furthermore, the axial contact stiffness has a significant effect on the sensitivity of the SNOM probe, and this should be noted when designing new cantilever probes.     

Development of Scanning Near-Field Optical Microscope Working under Cryogenic Temperature and Strong Magnetic Field

We report on the development of a cantilever-based scanning near-field optical microscope (SNOM) working in an extreme environment, at cryogenic temperature around 10 K and under strong magnetic field up to 7 T. We designed a new optical system based on an infinite conjugate microscope, which extracts the near-field signal from a small aperture through a narrow chamber into free space as collimated light. Using this system, we successfully measured near-field and topographical images of a metal-hole sample simultaneously. Combining the local optical accessing technique with the external control of the electronic state, this SNOM system will be a powerful tool to study optical properties of semiconductor nanostructures.     

Optical near-field mapping of bright and dark quantum dot states

We theoretically investigate scanning near-field optical microscopy (SNOM) of semiconductor quantum dots. A general theoretical framework is developed that accounts for photo excitation and relaxation in complex dielectric environments. We find that in the near-field regime bright and dark excitonic states become mixed, opening new channels for the coupling to the electromagnetic field.     

照明模式SNOM中样品对近场光场分布的影响

在同时考虑样品的形貌及材料光学参量和入射光偏振模式的情况下,利用基于边界元方法编写的二维矢量电磁场计算程序,对工作在照明模式下的扫描近场光学显微镜（Scanning Near-field Optical Microscope,SNOM）的近场矢量电磁场分布进行了数值计算模拟研究.结果表明,在没有表面形貌特征时,探针的光能量透射率随样品材料的折射率和损耗角的增加而增大,而样品表面光斑尺寸受折射率和损耗角的影响很小;对有形貌特征的探针扫描像研究结果表明,SNOM的分辨率随着样品的折射率和损耗角的增加而提高;对SNOM不同的工作模式的扫描成像信号进行的计算结果表明,恒定间距扫描方式比恒定高度扫描方式对样品表面的细节有较强的分辨能力.     

Transmission enhancement of Ag nanoparticle aggregates in azo-polymer films

Ag nanoparticle aggregates in azo-polymer films were investigated by using scanning near-field optical microscopy. The near-field optical images show that transmission enhancement happened for these metal aggregates. Far-field experiment results show that the photo-induced isomeration speed of the azo-polymer molecules was enhanced when doped with Ag nanoparticle aggregates. The mechanism of the transmittance enhancement and speed enhancement was discussed from the viewpoint of the excitation of the surface plasmon of Ag nanoparticle aggregates. PACS 68.37.Uv; 42.70.Jk; 78.67.Bf; 71.36.+c     

SETUP AND APPLICATION OF SCANNING NEAR-FIELD OPTICAL MICROSCOPY

The research on the setup and application of scanning near-field optical microscopy (SNOM) performed in our laboratory is reviewed in this report. We have constructed a versatile low temperature scanning near-field optical microscope with the capability of near-field imaging and spectroscopy, operating at liquid nitrogen temperature. A special designed coaxial double lens was used to introduce the illumination beam through a 200μm fiber; the detected optical signal was transmitted via a fiber tip to an avalanche photon detector. The performance test shows the stability of the new design. The shear force image and optical image of a standard sample are shown. A system of SNOM working at room temperature and atmosphere was used to characterize semiconductors and bio-molecular samples. It revealed the unique features of semiconductor microdisks in the near-field that is significantly different from that of far-field. The effects of different geographic microstructures on the near-field light distribution of InGaP, GaN, and InGaN multi-quantum-well microdisk were observed.     

Photopatterning of a monomolecular dye film by means of scanning near-field optical microscopy

Patterned bleaching of a photolabile monomolecular dye film by means of scanning near-field optical microscopy (SNOM) is demonstrated. After exposure, the written patterns were verified by SNOM with fluorescence detection. The adsorption of appropriate material to such near-field optically created patterns seems now feasible. The ultimate resolution limit of a monomolecular dye film for patterned bleaching by SNOM is discussed on the basis of a simple model.     

Scanning Near-Field Optical Microscopy and Microspectroscopy of Green Fluorescent Protein in Intact Escherichia coli Bacteria

Scanning near-field optical microscopy (SNOM) yields high-resolution topographic and optical information and constitutes an important new technique for visualizing biological systems. By coupling a spectrograph to a near-field microscope, we have been able to perform microspectroscopic measurements with a spatial resolution greatly exceeding that of the conventional optical microscope. Here we present SNOM images of Escherichia coli bacteria expressing a mutant green fluorescent protein (GFP), an important reporter molecule in cell, developmental, and molecular biology. Near-field emission spectra confirm that the fluorescence detected by SNOM arises from bacterially expressed GFP molecules.     

扫描近场光学显微镜的光耦合偶极子模型

为了研究扫描近场光学显微镜中探针和粗糙样品表面的耦合相互作用,提出了一种光耦合偶极子模型.在该模型中,探针和样品突起都由光极化偶极子表示,在准静态电磁场近似的情况下样品表面的诱导极化效应由影像偶极子表示,应用偶极子辐射理论可以得到系统的自洽场方程.此模型提供了一种直观分析扫描近场光学显微镜中探针和样品相互作用机理的方法.在此基础上,进一步讨论了金属样品的近场成像特点和其特有的局域光学共振现象.数值结果表明：不同于一般的介质样品,金属样品的近场图像与入射光频率直接相关,改变入射光的频率,获得的样品近场图像的形状和对比度都会发生变化.特别是当入射光频率处于样品极化共振范围内时,金属纳米粒子的极化率会出现光极化共振,这样就可以获得样品粒子的最大有效尺寸,为提高系统的分辨率提供了一条重要途径.     

25 nm resolution single molecular fluorescence imaging by scanning near-field optical/atomic force microscopy

High-resolution single molecular near-field fluorescence images were observed by scanning near-field optical/atomic force microscopy (SNOM/AFM). We modified the SNOM/AFM for both high-resolution fluorescence imaging and high-resolution topographic imaging. The imaged fluorophore, Alexa 532, is prepared with a poly-methyl-methacrylate (PMMA) film coating. A fluorescence resolution of 25 nm was obtained with a simultaneous topographic image of a flat surface. A sample prepared with a lower PMMA concentration exhibited a rough surface in the micro area. The results for the flat surface indicated that the fluorescence resolution is worst in the rough surface sample, that the maximum fluorescence intensities for the individual fluorophore are similar, and that the decay rate is faster. Thus, we concluded that the morphological effect is an important factor in fluorescence image resolution and the apparent lifetimes of the fluorescence molecules.     

金属覆层光纤探针近场特性研究

采用有限积分法对用于近场光学显微镜的旋转对称光纤探针进行了数值模拟计算,研究了光纤探针开口附近亚波长范围的电磁场及其能量密度的分布.计算结果表明,在探针外,光场为沿探针轴线方向的近逝波,其空间光场的分布与激励光场及其极化方向有关,在激励光场的极化方向出现了由感应电荷引起的边缘增强效应.同时研究了近场光纤探针的空间分辨率和样品处的电磁场能量,结果表明光纤探针孔的尺寸及其与样品的作用距离是影响探针的分辨率和样品内电磁场能量的重要因素.     

Investigation of the Doughnut Effect in Cy3-Labeled Protein Microarrays using Scanning Near-Field Optical Microscope

We demonstrate the fluorescence mapping of protein microarrays by the technique of scanning near-field optical microscopy (SNOM) and confocal microscopy. Micron sized spots (300 μm) of human Immunoglobulin G (hIgG) protein with and without a Cy3 dye labeling have been fabricated on glass substrates by an immobilization method which makes use of calixcrown derivatives termed Prolinker. We have also tried to probe into the well-known “doughnut effect” observed in fluorescence images of proteins using the SNOM technique. The topographic and fluorescence SNOM images revealed that the number of proteins at the boundary of the spot were more than at the center in the case of the microarray spot which showed brighter luminescence at the edge than at the center in the confocal image.     

Effect of interactive damping on vibration sensitivities of a scanning near-field optical microscope probe

The effect of interactive damping on the sensitivity of flexural and axial vibration modes of scanning near-field optical microscope (SNOM) with a tapered optical fiber probe has been analyzed. The interaction of the SNOM probe with a sample surface is modeled by a combination of a spring and a dashpot in the flexural direction and a similar combination in the axial direction. An approximate form for the sensitivities of both modes was derived by using the Rayleigh–Ritz method. The results show that the interactive damping will decrease the sensitivities of both flexural and axial vibration modes when the contact stiffness is low. The more the damping effect, the lower the sensitivities are. In addition, when the contact stiffness was low, the flexural sensitivity of the tapered probe slightly increased as the tapered angle decreased. However, the axial sensitivity apparently decreased as the tapered angle decreased. When the contact stiffness became higher, the sensitivities of both flexural and axial vibration modes increased as the tapered angle increased. PACS 68.35.Ja; 07.79.Fc; 61.16.Ch     

Finite-difference time-domain analysis of refractive index grating on planar light waveguide circuit with optically trapped gold particles

The super-resolution capability of scanning near-field optical microscopy (SNOM) with a gold particle is studied by the two-dimensional finite-difference time-domain (2D FDTD) method. We obtain SNOM signals by integrating the far field within the numerical aperture of an objective lens for a refractive index grating by scanning optically trapped gold particles with different diameters illuminated by focused laser light at the wavelength of 515 nm. The signal is strong at a high refractive index of the grating and exhibits similar behavior to that obtained in the experiment with the grating fabricated on a planar light waveguide circuit with a period of 1060 nm. Furthermore, the signal modulation increases as the gold particle diameter decreases and reaches 0.82 at a diameter of 50 nm.     

飞秒时间分辨近场光学系统实现及其应用

结合飞秒光脉冲和近场光学显微镜，成功实现了飞秒时间分辨近场光学系统.系统通过高频声光调制和差频锁相探测，极大提高了信噪比并消除了抽运、探测光本底信号，从而在收集模式下测得了飞秒时间分辨的透射光微弱信号变化.同时获得了80nm的空间分辨和小于200fs的时间分辨测量.利用该实验系统，研究了金纳米结构的热电子弛豫动力学过程，观察到不同位置间热电子弛豫动力学的差异. 关键词： 飞秒近场 扫描近场光学显微镜 飞秒光脉冲 金纳米颗粒     

Use of a scanning near-field optical microscope architecture to study fluorescence and energy transfer near a metal

Fluorescence intensity depends strongly on the distance between the emitting molecule and a metallic interface. We show that a scanning near-field optical microscope (SNOM) is a simple and versatile tool for studying such an effect. The fluorescent molecules are embedded in a layer upon a silica substrate, and metal is coated on the SNOM tip. We present variations of fluorescence intensity versus tip-sample distance from 800 to ~80 nm . A simple model is used to explain the experimental results. The proposed setup could be used to study nonradiative transfer at a nanometric scale. It could also yield to a new type of optical near-field profiler that uses fluorescent signal.     

Optical polarization response at gold nanosheet edges probed by scanning near-field optical microscopy

Optical properties of metallic edge-like structures known as knife-edges are a topic of interest and possess potential applications in enhanced Raman scattering, optical trapping, etc. In this work, we investigate the near-field optical polarization response at the edge of a triangular gold nanosheet, which is synthesized by a wet chemical method. A homemade scanning near-field optical microscope(SNOM) in collection mode is adopted, which is able to accurately locate its probe at the edge during experiments. An uncoated straight fiber probe is used in the SNOM, because it still preserves the property of light polarization though it has the depolarization to some extent. By comparing near-field intensities at the edge and glass substrate, detected in different polarization directions of incident light, the edge-induced depolarization is found,which is supported by the finite differential time domain(FDTD) simulated results. The depolarized phenomenon in the near-field is similar to that in the far-field.